* Allocate items on thd->mem_root while refixing vcol exprs
* Make vcol tree changes register and roll them back after the statement is executed.
Explanation:
Due to collation implementation specifics an Item tree could change while fixing.
The tricky thing here is to make it on a proper arena.
It's usually not a problem when a field is deterministic, however, makes a pain vice-versa, during allocation allocating.
A non-deterministic field should be refixed on each statement, since it depends on the environment state.
Changing the tree will be temporary and therefore it should be reverted after the statement execution.
The function thd_query_safe() is used in the implementation of the
following INFORMATION_SCHEMA views:
information_schema.innodb_trx
information_schema.innodb_locks
information_schema.innodb_lock_waits
information_schema.rocksdb_trx
The implementation of the InnoDB views is in trx_i_s_common_fill_table().
This function invokes trx_i_s_possibly_fetch_data_into_cache(),
which will acquire lock_sys->mutex and trx_sys->mutex in order to
protect the set of active transactions and explicit locks.
While holding those mutexes, it will traverse the collection of
InnoDB transactions. For each transaction, thd_query_safe() will be
invoked.
When called via trx_i_s_common_fill_table(), thd_query_safe()
is acquiring THD::LOCK_thd_data while holding the InnoDB locks.
This will cause a deadlock with THD::awake() (such as executing
KILL QUERY), because THD::awake() could invoke lock_trx_handle_wait(),
which attempts to acquire lock_sys->mutex while already holding
THD::lock_thd_data.
thd_query_safe(): Invoke mysql_mutex_trylock() instead of
mysql_mutex_lock(). Return the empty string if the mutex
cannot be acquired without waiting.
in fact, in MariaDB it cannot, but it can show spurious slaves
in SHOW SLAVE HOSTS.
slave was registered in COM_REGISTER_SLAVE and un-registered after
COM_BINLOG_DUMP. If there was no COM_BINLOG_DUMP, it would never
unregister.
If async slave thread (slave SQL handler), becomes a BF victim, it may occasionally happen that rollbacker thread is used to carry out the rollback instead of the async slave thread.
This can happen, if async slave thread has flagged "idle" state when BF thread tries to figure out how to kill the victim.
The issue was possible to test by using a galera cluster as slave for external master, and issuing high load of conflicting writes through async replication and directly against galera cluster nodes.
However, a deterministic mtr test for the "conflict window" has not yet been worked on.
The fix, in this patch makes sure that async slave thread state is never set to IDLE. This prevents the rollbacker thread to intervene.
The wsrep_query_state change was refactored to happen by dedicated function to make controlling the idle state change in one place.
Relates to MDEV-17863 DROP TEMPORARY TABLE creates a transaction in
binary log on read only server
Other things:
- Fixed that insert into normal_table select from tmp_table is
replicated as row events if tmp_table doesn't exists on slave.
- Use local variables table and share to simplify code
- Use sql_command_flags to detect what kind of command was used
- Added CF_DELETES_DATA to simplify detecton of delete commands
- Removed duplicate error in create_table_from_items().
- Any temporary tables created under read-only mode will never be logged
to binary log. Any usage of these tables to update normal tables, even
after read-only has been disabled, will use row base logging (as the
temporary table will not be on the slave).
- Analyze, check and repair table will not be logged in read-only mode.
Other things:
- Removed not used varaibles in
MYSQL_BIN_LOG::flush_and_set_pending_rows_event.
- Set table_share->table_creation_was_logged for all normal tables.
- THD::binlog_query() now returns -1 if statement was not logged., This
is used to update table_share->table_creation_was_logged.
- Don't log admin statements in opt_readonly is set.
- Table's that doesn't have table_creation_was_logged will set binlog format to row
logging.
- Removed not needed/wrong setting of table->s->table_creation_was_logged
in create_table_from_items()
read_statistics_for_tables_if_needed
Regression after 279a907, read_statistics_for_tables_if_needed() was
called after open_normal_and_derived_tables() failure.
Fixed by moving read_statistics_for_tables() call to a branch of
get_schema_stat_record() where result of open_normal_and_derived_tables()
is checked.
Removed THD::force_read_stats, added read_statistics_for_tables() instead.
Simplified away statistics_for_command_is_needed().
MDEV-17614 flags INSERT…ON DUPLICATE KEY UPDATE unsafe for statement-based
replication when there are multiple unique indexes. This correctly fixes
something whose attempted fix in MySQL 5.7
in mysql/mysql-server@c93b0d9a97
caused lock conflicts. That change was reverted in MySQL 5.7.26
in mysql/mysql-server@066b6fdd43
(with a substantial amount of other changes).
In MDEV-17073 we already disabled the unfortunate MySQL change when
statement-based replication was not being used. Now, thanks to MDEV-17614,
we can actually remove the change altogether.
This reverts commit 8a346f31b913daa011085afec2b2d38450c73e00 (MDEV-17073)
and mysql/mysql-server@c93b0d9a97 while
keeping the test cases.
Problem:-
When mysql executes INSERT ON DUPLICATE KEY INSERT, the storage engine checks
if the inserted row would generate a duplicate key error. If yes, it returns
the existing row to mysql, mysql updates it and sends it back to the storage
engine.When the table has more than one unique or primary key, this statement
is sensitive to the order in which the storage engines checks the keys.
Depending on this order, the storage engine may determine different rows
to mysql, and hence mysql can update different rows.The order that the
storage engine checks keys is not deterministic. For example, InnoDB checks
keys in an order that depends on the order in which indexes were added to
the table. The first added index is checked first. So if master and slave
have added indexes in different orders, then slave may go out of sync.
Solution:-
Make INSERT...ON DUPLICATE KEY UPDATE unsafe while using stmt or mixed format
When there is more then one unique key.
Although there is two exception.
1. Auto Increment key is not counted because Innodb will get gap lock for
failed Insert and concurrent insert will get a next increment value. But if
user supplies auto inc value it can be unsafe.
2. Count only unique keys for which insertion is performed.
So this patch also addresses the bug id #72921
Plugin fixed to not lock the LOCK_operations when not active.
Server fixed to lock the LOCK_plugin less - do it once per
thread and then only if a plugin was installed/uninstalled.
Originally introduced by e972125f1 to avoid harmless wait for
LOCK_global_system_variables in a newly created thread, which creation was
initiated by system variable update.
At the same time it opens dangerous hole, when system variable update
thread already released LOCK_global_system_variables and ack_receiver
thread haven't yet completed new THD construction. In this case THD
constructor goes completely unprotected.
Since ack_receiver.stop() waits for the thread to go down, we have to
temporarily release LOCK_global_system_variables so that it doesn't
deadlock with ack_receiver.run(). Unfortunately it breaks atomicity
of rpl_semi_sync_master_enabled updates and makes them not serialized.
LOCK_rpl_semi_sync_master_enabled was introduced to workaround the above.
TODO: move ack_receiver start/stop into repl_semisync_master
enable_master/disable_master under LOCK_binlog protection?
Part of MDEV-14984 - regression in connect performance
Rather than parsing session_track_system_variables when thread starts, do
it when first trackable event occurs.
Benchmarked on a 2socket/20core/40threads Broadwell system using sysbench
connect brencmark @40 threads (with select 1 disabled):
101379.77 -> 143016.68 CPS, whereas 10.2 is currently at 137766.31 CPS.
Part of MDEV-14984 - regression in connect performance
One less new/delete per connection.
Removed m_mem_flag since most allocs are thread specific. The only
exception are allocs performed during initialization.
Removed State_tracker and Session_tracker constructors as they don't make
sense anymore.
No reason to access session_sysvars_tracker via get_tracker(), so access
it directly instead.
Part of MDEV-14984 - regression in connect performance
If a derived table has SELECT DISTINCT, provide index statistics for it so that the join optimizer in the
upper select knows that ref access to the table will produce one row.
depends on uninitialised value
Initialized THD::force_read_stats introduced in the patch for MDEV-17605.
Leaving this field uninitialized in the constructor of the THD class may
trigger reading statistical data that is not needed.
ignore FK-prelocked tables when looking for write-prelocked tables
with auto-increment to complain about "Statement is unsafe because
it invokes a trigger or a stored function that inserts into an
AUTO_INCREMENT column"
This patch contains a fix for the MDEV-17262/17243 issues and
new mtr test.
These issues (MDEV-17262/17243) have two reasons:
1) After an intermediate commit, a transaction loses its status
of "transaction that registered in the MySQL for 2pc coordinator"
(in the InnoDB) due to the fact that since version 10.2 the
write_row() function (which located in the ha_innodb.cc) does
not call trx_register_for_2pc(m_prebuilt->trx) during the processing
of split transactions. It is necessary to restore this call inside
the write_row() when an intermediate commit was made (for a split
transaction).
Similarly, we need to set the flag of the started transaction
(m_prebuilt->sql_stat_start) after intermediate commit.
The table->file->extra(HA_EXTRA_FAKE_START_STMT) called from the
wsrep_load_data_split() function (which located in sql_load.cc)
will also do this, but it will be too late. As a result, the call
to the wsrep_append_keys() function from the InnoDB engine may be
lost or function may be called with invalid transaction identifier.
2) If a transaction with the LOAD DATA statement is divided into
logical mini-transactions (of the 10K rows) and binlog is rotated,
then in rare cases due to the wsrep handler re-registration at the
boundary of the split, the last portion of data may be lost. Since
splitting of the LOAD DATA into mini-transactions is technical,
I believe that we should not allow these mini-transactions to fall
into separate binlogs. Therefore, it is necessary to prohibit the
rotation of binlog in the middle of processing LOAD DATA statement.
https://jira.mariadb.org/browse/MDEV-17262 and
https://jira.mariadb.org/browse/MDEV-17243
Make mysqltest to use --ps-protocol more
use prepared statements for everything that server supports
with the exception of CALL (for now).
Fix discovered test failures and bugs.
tests:
* PROCESSLIST shows Execute state, not Query
* SHOW STATUS increments status variables more than in text protocol
* multi-statements should be avoided (see tests with a wrong delimiter)
* performance_schema events have different names in --ps-protocol
* --enable_prepare_warnings
mysqltest.cc:
* make sure run_query_stmt() doesn't crash if there's
no active connection (in wait_until_connected_again.inc)
* prepare all statements that server supports
protocol.h
* Protocol_discard::send_result_set_metadata() should not send
anything to the client.
sql_acl.cc:
* extract the functionality of getting the user for SHOW GRANTS
from check_show_access(), so that mysql_test_show_grants() could
generate the correct column names in the prepare step
sql_class.cc:
* result->prepare() can fail, don't ignore its return value
* use correct number of decimals for EXPLAIN columns
sql_parse.cc:
* discard profiling for SHOW PROFILE. In text protocol it's done in
prepare_schema_table(), but in --ps it is called on prepare only,
so nothing was discarding profiling during execute.
* move the permission checking code for SHOW CREATE VIEW to
mysqld_show_create_get_fields(), so that it would be called during
prepare step too.
* only set sel_result when it was created here and needs to be
destroyed in the same block. Avoid destroying lex->result.
* use the correct number of tables in check_show_access(). Saying
"as many as possible" doesn't work when first_not_own_table isn't
set yet.
sql_prepare.cc:
* use correct user name for SHOW GRANTS columns
* don't ignore verbose flag for SHOW SLAVE STATUS
* support preparing REVOKE ALL and ROLLBACK TO SAVEPOINT
* don't ignore errors from thd->prepare_explain_fields()
* use select_send result for sending ANALYZE and EXPLAIN, but don't
overwrite lex->result, because it might be needed to issue execute-time
errors (select_dumpvar - too many rows)
sql_show.cc:
* check grants for SHOW CREATE VIEW here, not in mysql_execute_command
sql_view.cc:
* use the correct function to check privileges. Old code was doing
check_access() for thd->security_ctx, which is invoker's sctx,
not definer's sctx. Hide various view related errors from the invoker.
sql_yacc.yy:
* initialize lex->select_lex for LOAD, otherwise it'll contain garbage
data that happen to fail tests with views in --ps (but not otherwise).
