Example of the failure:
http://buildbot.askmonty.org/buildbot/builders/bld-p9-rhel7/builds/4417/steps/mtr/logs/stdio
```
main.mysqld--help 'unix' w17 [ fail ]
Test ended at 2020-06-20 18:51:45
CURRENT_TEST: main.mysqld--help
--- /opt/buildbot-slave/bld-p9-rhel7/build/mysql-test/main/mysqld--help.result 2020-06-20 16:06:49.903604179 +0300
+++ /opt/buildbot-slave/bld-p9-rhel7/build/mysql-test/main/mysqld--help.reject 2020-06-20 18:51:44.886766820 +0300
@@ -1797,10 +1797,10 @@
sync-relay-log-info 10000
sysdate-is-now FALSE
system-versioning-alter-history ERROR
-table-cache 421
+table-cache 2000
table-definition-cache 400
-table-open-cache 421
-table-open-cache-instances 1
+table-open-cache 2000
+table-open-cache-instances 8
tc-heuristic-recover OFF
tcp-keepalive-interval 0
tcp-keepalive-probes 0
mysqltest: Result length mismatch
```
mtr: table_open_cache_basic autosized:
Lets assume that >400 are available and that
we can set the result back to the start value.
All of these system variables are autosized and can
generate MTR output differences.
Closes#1527
For DECIMAL[(M[,D])] datatype max_sort_length was not being honoured which was leading to buffer
overflow while making the sort key. The fix to this problem would be to create sort keys for decimals
with atmost max_sort_key bytes
Important:
The minimum value of max_sort_length has been raised to 8 (previously was 4),
so fixed size datatypes like DOUBLE and BIGINIT are not truncated for
lower values of max_sort_length.
Fix:
====
1) Combined innodb_ft_result_cache_limit_32.test and
innodb_ft_result_cache_limit_64.test test case in sys_vars suite.
2) Use word_size.inc for combinations of innodb_ft_result_cache_limit test case.
Make mysqltest to use --ps-protocol more
use prepared statements for everything that server supports
with the exception of CALL (for now).
Fix discovered test failures and bugs.
tests:
* PROCESSLIST shows Execute state, not Query
* SHOW STATUS increments status variables more than in text protocol
* multi-statements should be avoided (see tests with a wrong delimiter)
* performance_schema events have different names in --ps-protocol
* --enable_prepare_warnings
mysqltest.cc:
* make sure run_query_stmt() doesn't crash if there's
no active connection (in wait_until_connected_again.inc)
* prepare all statements that server supports
protocol.h
* Protocol_discard::send_result_set_metadata() should not send
anything to the client.
sql_acl.cc:
* extract the functionality of getting the user for SHOW GRANTS
from check_show_access(), so that mysql_test_show_grants() could
generate the correct column names in the prepare step
sql_class.cc:
* result->prepare() can fail, don't ignore its return value
* use correct number of decimals for EXPLAIN columns
sql_parse.cc:
* discard profiling for SHOW PROFILE. In text protocol it's done in
prepare_schema_table(), but in --ps it is called on prepare only,
so nothing was discarding profiling during execute.
* move the permission checking code for SHOW CREATE VIEW to
mysqld_show_create_get_fields(), so that it would be called during
prepare step too.
* only set sel_result when it was created here and needs to be
destroyed in the same block. Avoid destroying lex->result.
* use the correct number of tables in check_show_access(). Saying
"as many as possible" doesn't work when first_not_own_table isn't
set yet.
sql_prepare.cc:
* use correct user name for SHOW GRANTS columns
* don't ignore verbose flag for SHOW SLAVE STATUS
* support preparing REVOKE ALL and ROLLBACK TO SAVEPOINT
* don't ignore errors from thd->prepare_explain_fields()
* use select_send result for sending ANALYZE and EXPLAIN, but don't
overwrite lex->result, because it might be needed to issue execute-time
errors (select_dumpvar - too many rows)
sql_show.cc:
* check grants for SHOW CREATE VIEW here, not in mysql_execute_command
sql_view.cc:
* use the correct function to check privileges. Old code was doing
check_access() for thd->security_ctx, which is invoker's sctx,
not definer's sctx. Hide various view related errors from the invoker.
sql_yacc.yy:
* initialize lex->select_lex for LOAD, otherwise it'll contain garbage
data that happen to fail tests with views in --ps (but not otherwise).
This patch contains the port of the MDEV-18379 patch
for 10.1 branch, but also includes a number of changes
made within MDEV-17835, which are necessary for the
normal operation of tests that use IPv6:
1) Fixed flaws in the galera_3nodes mtr suite control scripts,
because of which they could not work with mariabackup.
2) Fixed numerous bugs in the SST scripts and in the mtr test
files (galera_3nodes mtr suite) that prevented the use of Galera
with IPv6 addresses.
3) Fixed flaws in tests for rsync and mysqldump (for galera_3nodes
mtr tests suite). These tests were not performed successfully
without these fixes.
4) Currently, the three-node mtr suite for Galera (galera_3nodes)
uses a separate IPv6 availability check using the "have_ipv6.inc"
file. This check duplicates a more accurate check at suite.pm
level, which can be used by including the file "check_ipv6.inc".
This patch removes this discrepancy between suites.
5) GAL-501 test in the galera_3nodes suite does not contain the
option "--bind-address=::" which is needed for the test to work
correctly with IPv6 (at least on some systems), since without
it the server will not wait for connections on the IPv6 interface.
https://jira.mariadb.org/browse/MDEV-18379
and partially https://jira.mariadb.org/browse/MDEV-17835
- Backported the MYSQL_SYSVAR_SIZE_T to 10.0
- The parameter innodb_ft_result_cache_limit was only 32 bits wide
also on 64-bit systems. Make it size_t, so that it will be 64 bits
on 64-bit systems.
- Added a test case that show how innodb_ft_result_cache_limit variables
behaves in 32bit and 64 bit system.
The upper 1M limit for max_prepared_stmt_count was set over 10 years
ago. It doesn't suite current hardware and a sysbench oltp_read_write
test with 512 threads will hit this limit.
MDEV--15609 engines/funcs.crash_manytables_number crashes with error 24
(too many open files)
MDEV-10286 Adjustment of table_open_cache according to system limits
does not work when open-files-limit option is provided
Fixed by adjusting tc_size downwards if there is not enough file
descriptors to use.
Other changes:
- Ensure that there is 30 (was 10) extra file descriptors for other usage
- Decrease TABLE_OPEN_CACHE_MIN to 200 as it's better to have a smaller
table cache than getting error 24
- Increase minimum of max_connections and table_open_cache from 1 to 10
as 1 is not usable for any real application, only for testing.
fix galera.galera_sst_mysqldump test to work:
* must connect to 127.0.0.1, where mysqld is listening
* disable wsrep_sync_wait in wsrep_sst_mysqldump, otherwise
sst can deadlock
* allow 127.0.0.1 for bind_address and wsrep_sst_receive_address.
(it's useful in tests, or when two nodes are on the same box,
or when nodes are on different boxes, but the connection is
tunelled, or whatever. Don't judge user's setup). MDEV-14070
* don't wait for client connections to die when doing
mysqldump sst. they'll die in a due time, and if needed mysql
will wait on locks until they do. MDEV-14069
Also don't mark it big, to make sure it's sufficiently tested
InnoDB in Debian uses utf8mb4 as default character set since
version 10.0.20-2. This leads to major pain due to keys longer
than 767 bytes.
MariaDB 10.2 (and MySQL 5.7) introduced the setting
innodb_default_row_format that is DYNAMIC by default. These
versions also changed the default values of the parameters
innodb_large_prefix=ON and innodb_file_format=Barracuda.
This would allow longer column index prefixes to be created.
The original purpose of these parameters was to allow InnoDB
to be downgraded to MySQL 5.1, which is long out of support.
Every InnoDB version since MySQL 5.5 does support operation
with the relaxed limits.
We backport the parameter innodb_default_row_format to
MariaDB 10.1, but we will keep its default value at COMPACT.
This allows MariaDB 10.1 to be configured so that CREATE TABLE
is less likely to encounter a problem with the limitation:
loose_innodb_large_prefix=ON
loose_innodb_default_row_format=DYNAMIC
(Note that the setting innodb_large_prefix was deprecated in
MariaDB 10.2 and removed in MariaDB 10.3.)
The only observable difference in the behaviour with the default
settings should be that ROW_FORMAT=DYNAMIC tables can be created
both in the system tablespace and in .ibd files, no matter what
innodb_file_format has been assigned to. Unlike MariaDB 10.2,
we are not changing the default value of innodb_file_format,
so ROW_FORMAT=COMPRESSED tables cannot be created without
changing the parameter.
This is 10.1 version where no merge error exists.
wsrep_on_check
New check function. Galera can't be enabled
if innodb-lock-schedule-algorithm=VATS.
innobase_kill_query
In Galera async kill we could own lock mutex.
innobase_init
If Variance-Aware-Transaction-Sheduling Algorithm (VATS) is
used on Galera we refuse to start InnoDB.
Changed innodb-lock-schedule-algorithm as read-only parameter
as it was designed to be.
lock_rec_other_has_expl_req,
lock_rec_other_has_conflicting,
lock_rec_lock_slow
lock_table_other_has_incompatible
lock_rec_insert_check_and_lock
Change pointer to conflicting lock to normal pointer as this
pointer contents could be changed later.
- innodb_buffer_pool_dump_now_basic is modified to make sure it
really performs a dump and waits till it completion, to avoid
the apparent or hidden failure similar to MDEV-9713 / MDEV-10651
- innodb_buffer_pool_dump_pct_basic is modified to re-use the new
code from innodb_buffer_pool_dump_now_basic and thus avoid
the failure MDEV-10651
- innodb_buffer_pool_load_now_basic is re-written to simplify
the logic by re-using the code innodb_buffer_pool_dump_now_basic
and is given an opt file to avoid race conditions with
buffer pool load performed upon server startup, which causes
MDEV-14196 failure
When the server is started in innodb_read_only mode, there cannot be
any writes to persistent InnoDB/XtraDB files. Just like the creation
of buf_flush_page_cleaner_thread is skipped in this case, also
the creation of the XtraDB-specific buf_flush_lru_manager_thread
should be skipped.
Test fails, because of a bug: global delay_key_write is
cached in the THD and the cached value becomes out-of-date
when the global value changes.
This is fixed in MDEV-11335
Rather than bumping the version again,
* d036cc9b2f595cac1453f2a251515c6b9a408521, and again
* 5a4ec8e60b10c176af1dd84157e1d15cf905637b, and again
* 7f19330c595e3183d079fe2c18eecc74740e8f83;
Just accept version numbers change. Also accept that people may want
to test this against more than one version.
Also, implement MDEV-11027 a little differently from 5.5 and 10.0:
recv_apply_hashed_log_recs(): Change the return type back to void
(DB_SUCCESS was always returned).
Report progress also via systemd using sd_notifyf().
Remove the debug parameter innodb_force_recovery_crash that was
introduced into MySQL 5.6 by me in WL#6494 which allowed InnoDB
to resize the redo log on startup.
Let innodb.log_file_size actually start up the server, but ensure
that the InnoDB storage engine refuses to start up in each of the
scenarios.
Tasks:-
Changes in wsrep_dirty_reads variable
1.) Global + Session scope (Current: session-only)
2.) Can be set using command line.
3.) Allow all commands that do not change data (besides SELECT)
4.) Allow prepared Statements that do not change data
5.) Works with wsrep_sync_wait enabled
Increase max number of possible table_open_cache instances from 512K
to 1024K. This only affects user who are trying to set the variable over
the old limit.
Delete not used test table_open_cache_instances_basic
(Need to be added back and rewritten in 10.2)
