The task is to
(a) add a comment on indexes and
(b) increase the maximum length of column, table and the new index comments.
The patch committed on behalf of Yoshinori Matsunobu (Yoshinori.Matsunobu@Sun.COM).
The task is to
(a) add a comment on indexes and
(b) increase the maximum length of column, table and the new index comments.
The patch committed on behalf of Yoshinori Matsunobu (Yoshinori.Matsunobu@Sun.COM).
causing crashes!
Adding a SPATIAL INDEX on a non-geometrical column caused a
segmentation fault when the table was subsequently
inserted into.
A test was added in mysql_prepare_create_table to explicitly
check whether non-geometrical columns are used in a
spatial index, and throw an error if so.
mysql-test/t/gis.test:
Added test cases to verify that only geometrical
columns can get a spatial index.
In addition, verify that only a single geom.
column can participate in a spatial index.
causing crashes!
Adding a SPATIAL INDEX on a non-geometrical column caused a
segmentation fault when the table was subsequently
inserted into.
A test was added in mysql_prepare_create_table to explicitly
check whether non-geometrical columns are used in a
spatial index, and throw an error if so.
corruption and crash results
An index creation statement where the index key
is larger/wider than the column it references
should throw an error.
A statement like:
CREATE TABLE t1 (a CHAR(1), PRIMARY KEY (A(255)))
did not error, but a segmentation fault followed when
an insertion was attempted on the table
The partial key validiation clause has been
restructured to (hopefully) better document which
uses of partial keys are valid.
corruption and crash results
An index creation statement where the index key
is larger/wider than the column it references
should throw an error.
A statement like:
CREATE TABLE t1 (a CHAR(1), PRIMARY KEY (A(255)))
did not error, but a segmentation fault followed when
an insertion was attempted on the table
The partial key validiation clause has been
restructured to (hopefully) better document which
uses of partial keys are valid.
This patch introduces timeouts for metadata locks.
The timeout is specified in seconds using the new dynamic system
variable "lock_wait_timeout" which has both GLOBAL and SESSION
scopes. Allowed values range from 1 to 31536000 seconds (= 1 year).
The default value is 1 year.
The new server parameter "lock-wait-timeout" can be used to set
the default value parameter upon server startup.
"lock_wait_timeout" applies to all statements that use metadata locks.
These include DML and DDL operations on tables, views, stored procedures
and stored functions. They also include LOCK TABLES, FLUSH TABLES WITH
READ LOCK and HANDLER statements.
The patch also changes thr_lock.c code (table data locks used by MyISAM
and other simplistic engines) to use the same system variable.
InnoDB row locks are unaffected.
One exception to the handling of the "lock_wait_timeout" variable
is delayed inserts. All delayed inserts are executed with a timeout
of 1 year regardless of the setting for the global variable. As the
connection issuing the delayed insert gets no notification of
delayed insert timeouts, we want to avoid unnecessary timeouts.
It's important to note that the timeout value is used for each lock
acquired and that one statement can take more than one lock.
A statement can therefore block for longer than the lock_wait_timeout
value before reporting a timeout error. When lock timeout occurs,
ER_LOCK_WAIT_TIMEOUT is reported.
Test case added to lock_multi.test.
include/my_pthread.h:
Added macros for comparing two timespec structs.
include/thr_lock.h:
Introduced timeouts for thr_lock.c locks.
mysql-test/r/mysqld--help-notwin.result:
Updated result file with the new server variable.
mysql-test/r/mysqld--help-win.result:
Updated result file with the new server variable.
mysql-test/suite/sys_vars/r/lock_wait_timeout_basic.result:
Added basic test for the new server variable.
mysql-test/suite/sys_vars/t/lock_wait_timeout_basic.test:
Added basic test for the new server variable.
mysys/thr_lock.c:
Introduced timeouts for thr_lock.c locks.
sql/mdl.cc:
Introduced timeouts for metadata locks.
sql/mdl.h:
Introduced timeouts for metadata locks.
sql/sql_base.cc:
Introduced timeouts in tdc_wait_for_old_versions().
sql/sql_class.h:
Added new server variable lock_wait_timeout.
sql/sys_vars.cc:
Added new server variable lock_wait_timeout.
This patch introduces timeouts for metadata locks.
The timeout is specified in seconds using the new dynamic system
variable "lock_wait_timeout" which has both GLOBAL and SESSION
scopes. Allowed values range from 1 to 31536000 seconds (= 1 year).
The default value is 1 year.
The new server parameter "lock-wait-timeout" can be used to set
the default value parameter upon server startup.
"lock_wait_timeout" applies to all statements that use metadata locks.
These include DML and DDL operations on tables, views, stored procedures
and stored functions. They also include LOCK TABLES, FLUSH TABLES WITH
READ LOCK and HANDLER statements.
The patch also changes thr_lock.c code (table data locks used by MyISAM
and other simplistic engines) to use the same system variable.
InnoDB row locks are unaffected.
One exception to the handling of the "lock_wait_timeout" variable
is delayed inserts. All delayed inserts are executed with a timeout
of 1 year regardless of the setting for the global variable. As the
connection issuing the delayed insert gets no notification of
delayed insert timeouts, we want to avoid unnecessary timeouts.
It's important to note that the timeout value is used for each lock
acquired and that one statement can take more than one lock.
A statement can therefore block for longer than the lock_wait_timeout
value before reporting a timeout error. When lock timeout occurs,
ER_LOCK_WAIT_TIMEOUT is reported.
Test case added to lock_multi.test.
myisam-recover options changed from OFF to 'DEFAULT' to get less change of data loss when using MyISAM.
(The disadvantage is that changed MyISAM tables will be checked at access time; Use --myisam-recover=OFF for old behavior)
Don't call extra(HA_EXTRA_FORCE_REOPEN) in ALTER TABLE if table is locked as this will mark table as crashed!
Added assert to detect if we accidently would use MyISAM versioning in MySQL
include/my_base.h:
Mark NOT_USED as USED, as we now use this as a flag to not call extra()
mysql-test/mysql-test-run.pl:
Don't write all options when there is something wrong with the arguments
mysql-test/r/sp-destruct.result:
Add missing flush of mysql.proc (as the test copied live tables)
mysql-test/r/variables.result:
myisam-recover options changed to 'default'
mysql-test/r/view.result:
Don't show create time in result
mysql-test/suite/maria/t/maria-recovery2-master.opt:
Don't run test with myisam-recover (as this produces extra warnings during simulated death)
mysql-test/t/sp-destruct.test:
Add missing flush of mysql.proc (as the test copied live tables)
mysql-test/t/view.test:
Don't show create time in result
sql/lock.cc:
Added marker if table was deleted to argument list
sql/mysql_priv.h:
Added marker if table was deleted to argument list
sql/mysqld.cc:
myisam-recover options changed from OFF to 'DEFAULT' to get less change of data loss when using MyISAM
Allow one to specify OFF as argument to myisam-recover (was default before but one couldn't specify it)
sql/sql_base.cc:
Mark if table is going to be deleted
sql/sql_delete.cc:
Mark if table is going to be deleted
sql/sql_table.cc:
Mark if table is going to be deleted
Don't call extra(HA_EXTRA_FORCE_REOPEN) in ALTER TABLE if table is locked as this will mark table as crashed!
sql/table.cc:
Signal to handler if table is getting deleted as part of getting droped from table cache.
sql/table.h:
Added marker if table is going to be deleted.
storage/maria/ha_maria.cc:
Don't search for transaction handler if file is not transactional or outside of transaction
(Fixed possible core dump)
storage/maria/ma_blockrec.c:
Don't write changed information if table is going to be deleted.
storage/maria/ma_close.c:
Don't write changed information if table is going to be deleted.
storage/maria/ma_extra.c:
Mark tables that are deleted as crased, to ensure good behavior on restart if we suddenly crash.
storage/maria/ma_locking.c:
Cleanup
storage/maria/ma_recovery.c:
We need trnman to be inited during redo phase (to be able to open tables checked with maria_chk)
storage/maria/maria_def.h:
Added marker if table is going to be deleted.
storage/myisam/mi_close.c:
Don't write changed information if table is going to be deleted.
storage/myisam/mi_extra.c:
Mark tables that are deleted as crased, to ensure good behavior on restart if we suddenly crash.
storage/myisam/mi_open.c:
Added assert to detect if we accidently would use MyISAM versioning in MySQL
storage/myisam/myisamdef.h:
Added marker if table is going to be deleted.
Problem was that in mysql-trunk the ER() macro is now dependent on current_thd
and the innodb monitor thread has no binding to that thd object. This cause
the crash because of bad derefencing.
Solution was to add a new macro which take the thd as an argument (which the innodb
thread uses for the call).
(Updated according to reviewers comments, i.e. added ER_THD_OR_DEFAULT and
moved test to suite parts.)
mysql-test/suite/parts/r/partition_innodb_status_file.result:
Bug#50201: Server crashes in explain_filename on an InnoDB partitioned table
New test result file
mysql-test/suite/parts/t/partition_innodb_status_file-master.opt:
Bug#50201: Server crashes in explain_filename on an InnoDB partitioned table
New test opt file
mysql-test/suite/parts/t/partition_innodb_status_file.test:
Bug#50201: Server crashes in explain_filename on an InnoDB partitioned table
New test.
Note that the innodb monitor thread only runs every 15 seconds, so this
test will take at least 15 seconds, so I have moved it to the parts suite.
sql/sql_table.cc:
Bug#50201: Server crashes in explain_filename on an InnoDB partitioned table
Using thd safe ER macro.
sql/unireg.h:
Bug#50201: Server crashes in explain_filename on an InnoDB partitioned table
Added ER macros for use with specified thd pointer.
Problem was that in mysql-trunk the ER() macro is now dependent on current_thd
and the innodb monitor thread has no binding to that thd object. This cause
the crash because of bad derefencing.
Solution was to add a new macro which take the thd as an argument (which the innodb
thread uses for the call).
(Updated according to reviewers comments, i.e. added ER_THD_OR_DEFAULT and
moved test to suite parts.)
mysql-test/t/disabled.def:
Restore disabled ssl tests: SSL certificates were updated.
Disable sp_sync.test, the test case can't work in next-4284.
mysql-test/t/partition_innodb.test:
Disable parsing of the test case for Bug#47343,
the test can not work in next-4284.
mysql-test/t/ps_ddl.test:
Update results (CREATE TABLE IF NOT EXISTS takes
into account existence of the temporary table).
Change the error code for ER_WARN_I_S_SKIPPED_TABLE, to not
upset the tests that rely on ER_SLAVE_CONVERSION_ERROR error
code = 1667.
Fix a merge bug with binlogging of CREATE TABLE (temporary tables).
Change the error code for ER_WARN_I_S_SKIPPED_TABLE, to not
upset the tests that rely on ER_SLAVE_CONVERSION_ERROR error
code = 1667.
Fix a merge bug with binlogging of CREATE TABLE (temporary tables).
Cherry-pick a fix Bug#37148 from next-mr, to preserve
file ids of the added files, and ensure that all the necessary
changes have been pulled.
Since initially Bug#37148 was null-merged into 6.0,
the changeset that is now being cherry-picked was likewise
null merged into next-4284.
Now that Bug#37148 has been reapplied to 6.0, try to make
it work with next-4284. This is also necessary to be able
to pull other changes from 5.1-rep into next-4284.
To resolve the merge issues use this changeset applied
to 6.0:
revid:jperkin@sun.com-20091216103628-ylhqf7s6yegui2t9
revno: 3776.1.1
committer: He Zhenxing <zhenxing.he@sun.com>
branch nick: 6.0-codebase-bugfixing
timestamp: Thu 2009-12-17 17:02:50 +0800
message:
Fix merge problem with Bug#37148
Cherry-pick a fix Bug#37148 from next-mr, to preserve
file ids of the added files, and ensure that all the necessary
changes have been pulled.
Since initially Bug#37148 was null-merged into 6.0,
the changeset that is now being cherry-picked was likewise
null merged into next-4284.
Now that Bug#37148 has been reapplied to 6.0, try to make
it work with next-4284. This is also necessary to be able
to pull other changes from 5.1-rep into next-4284.
To resolve the merge issues use this changeset applied
to 6.0:
revid:jperkin@sun.com-20091216103628-ylhqf7s6yegui2t9
revno: 3776.1.1
committer: He Zhenxing <zhenxing.he@sun.com>
branch nick: 6.0-codebase-bugfixing
timestamp: Thu 2009-12-17 17:02:50 +0800
message:
Fix merge problem with Bug#37148
Removed local variables which became unused when we
have switched to new approach for CREATE TABLE LIKE
(i.e. abondoned .FRM file copying) and were causing
warnings during compilation.
Removed local variables which became unused when we
have switched to new approach for CREATE TABLE LIKE
(i.e. abondoned .FRM file copying) and were causing
warnings during compilation.
m_tickets.front() == m_trans_sentinel'".
Debug build of server crashed due to assert failure in MDL
subsystem when one tried to execute multi-table REPAIR or
OPTIMIZE in autocommit=0 mode.
The assert failure occured when multi-table REPAIR or OPTIMIZE
started processing of second table from its table list and
tried to acquire upgradable metadata lock on this table.
The cause of the assert failure were MDL locks left over from
processing of previous table. It turned out that in autocommit=0
mode close_thread_tables() which happens at the end of table
processing doesn't release metadata locks.
This fix solves problem by releasing locks explicitly using
MDL_context::release_trans_locks() call.
mysql-test/r/repair.result:
Added test for bug #50784 "MDL: Assertion `m_tickets.is_empty() ||
m_tickets.front() == m_trans_sentinel'".
mysql-test/t/repair.test:
Added test for bug #50784 "MDL: Assertion `m_tickets.is_empty() ||
m_tickets.front() == m_trans_sentinel'".
sql/sql_table.cc:
Ensure that metadata locks are released after multi-table REPAIR/
OPTIMIZE/... processes each table. close_thread_tables() which is
called after processing each table doesn't release metadata locks
if we are in autocommit=0 mode. So this have to be done
explicitly by calling MDL_context::release_trans_locks().
m_tickets.front() == m_trans_sentinel'".
Debug build of server crashed due to assert failure in MDL
subsystem when one tried to execute multi-table REPAIR or
OPTIMIZE in autocommit=0 mode.
The assert failure occured when multi-table REPAIR or OPTIMIZE
started processing of second table from its table list and
tried to acquire upgradable metadata lock on this table.
The cause of the assert failure were MDL locks left over from
processing of previous table. It turned out that in autocommit=0
mode close_thread_tables() which happens at the end of table
processing doesn't release metadata locks.
This fix solves problem by releasing locks explicitly using
MDL_context::release_trans_locks() call.
There was two problems:
The first was the symptom, caused by bad error handling in
ha_partition. It did not handle print_error etc. when
having no partitions (when used by dummy handler).
The second was the real problem that when dropping tables
it reused the table type (storage engine) from when the lock
was asked for, not the table type that it had when gaining
the exclusive name lock. So that it tried to delete tables
from wrong storage engines.
Solutions for the first problem was to accept some handler
calls to the partitioning handler even if it was not setup
with any partitions, and also if possible fallback
to use the base handler's default functions.
Solution for the second problem was to remove the optimization
to reuse the definition from the cache, instead always check
the frm-file when holding the LOCK_open mutex
(updated with a fix for a debug print crash and better
comments as required by reviewer, and removed optimization
to avoid reading the frm-file).
mysql-test/r/partition_debug_sync.result:
Bug#42438: Crash ha_partition::change_table_ptr
New result file using DEBUG_SYNC for deterministic results.
mysql-test/t/partition_debug_sync.test:
Bug#42438: Crash ha_partition::change_table_ptr
New test file using DEBUG_SYNC for deterministic results.
sql/ha_partition.cc:
Bug#42438: Crash ha_partition::change_table_ptr
allow some handler calls, used by error handling, even when
no partitions are setup. Fallback to default handling if possible.
sql/sql_base.cc:
Bug#42438: Crash ha_partition::change_table_ptr
Added DEBUG_SYNC point for deterministic test cases.
sql/sql_table.cc:
Bug#42438: Crash ha_partition::change_table_ptr
Always use the table type written in the .frm-file
(i.e. the current table type) when deleting a table.
Moved the check for log-table to not depend of the cache.
Added DEBUG_SYNC points for deterministic test cases.
