- Basic support for JOIN buffering
- The output is not polished but catches the main point:
tab->select_cond and tab->cache_select->cond are printed separately.
- Hash join support is poor still.
- Also fixed identation in JOIN_TAB::save_explain_data
Analysis:
--------
Certain queries using intrinsic temporary tables may fail due to
name clashes in the file name for the temporary table when the
'temp-pool' enabled.
'temp-pool' tries to reduce the number of different filenames used for
temp tables by allocating them from small pool in order to avoid
problems in the Linux kernel by using a three part filename:
<tmp_file_prefix>_<pid>_<temp_pool_slot_num>.
The bit corresponding to the temp_pool_slot_num is set in the bit
map maintained for the temp-pool when it used for the file name.
It is cleared after the temp table is deleted for re-use.
The 'create_tmp_table()' function call under error condition
tries to clear the same bit twice by calling 'free_tmp_table()'
and 'bitmap_lock_clear_bit()'. 'free_tmp_table()' does a delete
of the table/file and clears the bit by calling the same function
'bitmap_lock_clear_bit()'.
The issue reported can be triggered under the timing window mentioned
below for an error condition while creating the temp table:
a) THD1: Due to an error clears the temp pool slot number used by it
by calling 'free_tmp_table'.
b) THD2: In the process of creating the temp table by using an unused
slot number in the bit map.
c) THD1: Clears the slot number used THD2 by calling
'bitmap_lock_clear_bit()' after completing the call 'free_tmp_table'.
d) THD3: Uses the slot number used the THD2 since it is freed by THD1.
When it tries to create the temp file using that slot number,
an error is reported since it is currently in use by THD2.
[The error: Error 'Can't create/write to file
'/tmp/#sql_277e_0.MYD' (Errcode: 17)']
Another issue which may occur in 5.6 and trunk is that:
When the open temporary table fails after its creation(due to ulimit
or OOM error), the file is not deleted. Thus further attempts to use
the same slot number in the 'temp-pool' results in failure.
Fix:
---
a) Under the error condition calling the 'bitmap_lock_clear_bit()'
function to clear the bit is unnecessary since 'free_tmp_table()'
deletes the table/file and clears the bit. Hence removed the
redundant call 'bitmap_lock_clear_bit()' in 'create_tmp_table()'
This prevents the timing window under which the issue reported
can be seen.
b) If open of the temporary table fails, then the file is deleted
thus allowing the temp-pool slot number to be utilized for the
subsequent temporary table creation.
c) Also if the attempt to create temp table fails since it already
exists, the temp-pool slot for it is marked as used, to avoid
the problem from re-appearing.
MDEV-6971 Bad results with joins comparing TIME and DOUBLE/DECIMAL columns
Disallow using indexes on non-temporal columns to optimize
ref access, range access and table elimination when the counterpart's
cmp_type is TIME_RESULT, e.g.:
SELECT * FROM t1 WHERE indexed_int_column=time_expression;
Only index on a temporal column can be used to optimize temporal comparison
operations.
(Backport to 5.3)
(Attempt #2)
- Don't attempt to use BKA for materialized derived tables. The
table is neither filled nor fully opened yet, so attempt to
call handler->multi_range_read_info() causes crash.
- TABLE::create_key_part_by_field() should not set PART_KEY_FLAG in field->flags
= The reason is that it is used by hash join code which calls it to create a hash
table lookup structure. It doesn't create a real index.
= Another caller of the function is TABLE::add_tmp_key(). Made it to set the flag itself.
- The differences in join_cache.result could also be observed before this patch: one
could put "FLUSH TABLES" before the queries and get exactly the same difference.
(Attempt #2)
- Don't attempt to use BKA for materialized derived tables. The
table is neither filled nor fully opened yet, so attempt to
call handler->multi_range_read_info() causes crash.
- Don't attempt to use BKA for materialized derived tables. The
table is neither filled nor fully opened yet, so attempt to
call handler->multi_range_read_info() causes crash.
- test_if_skip_sort_order()/create_ref_for_key() may change table
access from EQ_REF(index1) to REF(index2).
- Doing so doesn't make much sense from optimization POV, but since
they are doing it, they should update tab->read_record.unlock_row
accordingly.
* ignore the OPTIMIZER_SWITCH_ENGINE_CONDITION_PUSHDOWN bit
* issue a deprecation warning on 'engine_condition_pushdown=on'
* remove unused remains of the old pre-5.5 engine_condition_pushdown variable
Don't double-check privileges for a column in the GROUP BY that refers to
the same column in SELECT clause. Privileges were already checked for SELECT clause.
- if test_if_skip_sort_order() decides to switch to using an index, or
switch from using ref to using quick select, it should set all
members accordingly.
The reason for the failure was a bug in an include file on debian that causes 'struct stat'
to have different sized depending on the environment.
This patch fixes so that we always include my_global.h or my_config.h before we include any other files.
Other things:
- Removed #include <my_global.h> in some include files; Better to always do this at the top level to have as few
"always-include-this-file-first' files as possible.
- Removed usage of some include files that where already included by my_global.h or by other files.
client/mysql_plugin.c:
Use my_global.h first
client/mysqlslap.c:
Remove duplicated include files
extra/comp_err.c:
Remove duplicated include files
include/m_string.h:
Remove duplicated include files
include/maria.h:
Remove duplicated include files
libmysqld/emb_qcache.cc:
Use my_global.h first
plugin/semisync/semisync.h:
Use my_pthread.h first
sql/datadict.cc:
Use my_global.h first
sql/debug_sync.cc:
Use my_global.h first
sql/derror.cc:
Use my_global.h first
sql/des_key_file.cc:
Use my_global.h first
sql/discover.cc:
Use my_global.h first
sql/event_data_objects.cc:
Use my_global.h first
sql/event_db_repository.cc:
Use my_global.h first
sql/event_parse_data.cc:
Use my_global.h first
sql/event_queue.cc:
Use my_global.h first
sql/event_scheduler.cc:
Use my_global.h first
sql/events.cc:
Use my_global.h first
sql/field.cc:
Use my_global.h first
Remove duplicated include files
sql/field_conv.cc:
Use my_global.h first
sql/filesort.cc:
Use my_global.h first
Remove duplicated include files
sql/gstream.cc:
Use my_global.h first
sql/ha_ndbcluster.cc:
Use my_global.h first
sql/ha_ndbcluster_binlog.cc:
Use my_global.h first
sql/ha_ndbcluster_cond.cc:
Use my_global.h first
sql/ha_partition.cc:
Use my_global.h first
sql/handler.cc:
Use my_global.h first
sql/hash_filo.cc:
Use my_global.h first
sql/hostname.cc:
Use my_global.h first
sql/init.cc:
Use my_global.h first
sql/item.cc:
Use my_global.h first
sql/item_buff.cc:
Use my_global.h first
sql/item_cmpfunc.cc:
Use my_global.h first
sql/item_create.cc:
Use my_global.h first
sql/item_geofunc.cc:
Use my_global.h first
sql/item_inetfunc.cc:
Use my_global.h first
sql/item_row.cc:
Use my_global.h first
sql/item_strfunc.cc:
Use my_global.h first
sql/item_subselect.cc:
Use my_global.h first
sql/item_sum.cc:
Use my_global.h first
sql/item_timefunc.cc:
Use my_global.h first
sql/item_xmlfunc.cc:
Use my_global.h first
sql/key.cc:
Use my_global.h first
sql/lock.cc:
Use my_global.h first
sql/log.cc:
Use my_global.h first
sql/log_event.cc:
Use my_global.h first
sql/log_event_old.cc:
Use my_global.h first
sql/mf_iocache.cc:
Use my_global.h first
sql/mysql_install_db.cc:
Remove duplicated include files
sql/mysqld.cc:
Remove duplicated include files
sql/net_serv.cc:
Remove duplicated include files
sql/opt_range.cc:
Use my_global.h first
sql/opt_subselect.cc:
Use my_global.h first
sql/opt_sum.cc:
Use my_global.h first
sql/parse_file.cc:
Use my_global.h first
sql/partition_info.cc:
Use my_global.h first
sql/procedure.cc:
Use my_global.h first
sql/protocol.cc:
Use my_global.h first
sql/records.cc:
Use my_global.h first
sql/records.h:
Don't include my_global.h
Better to do this at the upper level
sql/repl_failsafe.cc:
Use my_global.h first
sql/rpl_filter.cc:
Use my_global.h first
sql/rpl_gtid.cc:
Use my_global.h first
sql/rpl_handler.cc:
Use my_global.h first
sql/rpl_injector.cc:
Use my_global.h first
sql/rpl_record.cc:
Use my_global.h first
sql/rpl_record_old.cc:
Use my_global.h first
sql/rpl_reporting.cc:
Use my_global.h first
sql/rpl_rli.cc:
Use my_global.h first
sql/rpl_tblmap.cc:
Use my_global.h first
sql/rpl_utility.cc:
Use my_global.h first
sql/set_var.cc:
Added comment
sql/slave.cc:
Use my_global.h first
sql/sp.cc:
Use my_global.h first
sql/sp_cache.cc:
Use my_global.h first
sql/sp_head.cc:
Use my_global.h first
sql/sp_pcontext.cc:
Use my_global.h first
sql/sp_rcontext.cc:
Use my_global.h first
sql/spatial.cc:
Use my_global.h first
sql/sql_acl.cc:
Use my_global.h first
sql/sql_admin.cc:
Use my_global.h first
sql/sql_analyse.cc:
Use my_global.h first
sql/sql_audit.cc:
Use my_global.h first
sql/sql_base.cc:
Use my_global.h first
sql/sql_binlog.cc:
Use my_global.h first
sql/sql_bootstrap.cc:
Use my_global.h first
Use my_global.h first
sql/sql_cache.cc:
Use my_global.h first
sql/sql_class.cc:
Use my_global.h first
sql/sql_client.cc:
Use my_global.h first
sql/sql_connect.cc:
Use my_global.h first
sql/sql_crypt.cc:
Use my_global.h first
sql/sql_cursor.cc:
Use my_global.h first
sql/sql_db.cc:
Use my_global.h first
sql/sql_delete.cc:
Use my_global.h first
sql/sql_derived.cc:
Use my_global.h first
sql/sql_do.cc:
Use my_global.h first
sql/sql_error.cc:
Use my_global.h first
sql/sql_explain.cc:
Use my_global.h first
sql/sql_expression_cache.cc:
Use my_global.h first
sql/sql_handler.cc:
Use my_global.h first
sql/sql_help.cc:
Use my_global.h first
sql/sql_insert.cc:
Use my_global.h first
sql/sql_lex.cc:
Use my_global.h first
sql/sql_load.cc:
Use my_global.h first
sql/sql_locale.cc:
Use my_global.h first
sql/sql_manager.cc:
Use my_global.h first
sql/sql_parse.cc:
Use my_global.h first
sql/sql_partition.cc:
Use my_global.h first
sql/sql_plugin.cc:
Added comment
sql/sql_prepare.cc:
Use my_global.h first
sql/sql_priv.h:
Added error if we use this before including my_global.h
This check is here becasue so many files includes sql_priv.h first.
sql/sql_profile.cc:
Use my_global.h first
sql/sql_reload.cc:
Use my_global.h first
sql/sql_rename.cc:
Use my_global.h first
sql/sql_repl.cc:
Use my_global.h first
sql/sql_select.cc:
Use my_global.h first
sql/sql_servers.cc:
Use my_global.h first
sql/sql_show.cc:
Added comment
sql/sql_signal.cc:
Use my_global.h first
sql/sql_statistics.cc:
Use my_global.h first
sql/sql_table.cc:
Use my_global.h first
sql/sql_tablespace.cc:
Use my_global.h first
sql/sql_test.cc:
Use my_global.h first
sql/sql_time.cc:
Use my_global.h first
sql/sql_trigger.cc:
Use my_global.h first
sql/sql_udf.cc:
Use my_global.h first
sql/sql_union.cc:
Use my_global.h first
sql/sql_update.cc:
Use my_global.h first
sql/sql_view.cc:
Use my_global.h first
sql/sys_vars.cc:
Added comment
sql/table.cc:
Use my_global.h first
sql/thr_malloc.cc:
Use my_global.h first
sql/transaction.cc:
Use my_global.h first
sql/uniques.cc:
Use my_global.h first
sql/unireg.cc:
Use my_global.h first
sql/unireg.h:
Removed inclusion of my_global.h
storage/archive/ha_archive.cc:
Added comment
storage/blackhole/ha_blackhole.cc:
Use my_global.h first
storage/csv/ha_tina.cc:
Use my_global.h first
storage/csv/transparent_file.cc:
Use my_global.h first
storage/federated/ha_federated.cc:
Use my_global.h first
storage/federatedx/federatedx_io.cc:
Use my_global.h first
storage/federatedx/federatedx_io_mysql.cc:
Use my_global.h first
storage/federatedx/federatedx_io_null.cc:
Use my_global.h first
storage/federatedx/federatedx_txn.cc:
Use my_global.h first
storage/heap/ha_heap.cc:
Use my_global.h first
storage/innobase/handler/handler0alter.cc:
Use my_global.h first
storage/maria/ha_maria.cc:
Use my_global.h first
storage/maria/unittest/ma_maria_log_cleanup.c:
Remove duplicated include files
storage/maria/unittest/test_file.c:
Added comment
storage/myisam/ha_myisam.cc:
Move sql_plugin.h first as this includes my_global.h
storage/myisammrg/ha_myisammrg.cc:
Use my_global.h first
storage/oqgraph/oqgraph_thunk.cc:
Use my_config.h and my_global.h first
One could not include my_global.h before oqgraph_thunk.h (don't know why)
storage/spider/ha_spider.cc:
Use my_global.h first
storage/spider/hs_client/config.cpp:
Use my_global.h first
storage/spider/hs_client/escape.cpp:
Use my_global.h first
storage/spider/hs_client/fatal.cpp:
Use my_global.h first
storage/spider/hs_client/hstcpcli.cpp:
Use my_global.h first
storage/spider/hs_client/socket.cpp:
Use my_global.h first
storage/spider/hs_client/string_util.cpp:
Use my_global.h first
storage/spider/spd_conn.cc:
Use my_global.h first
storage/spider/spd_copy_tables.cc:
Use my_global.h first
storage/spider/spd_db_conn.cc:
Use my_global.h first
storage/spider/spd_db_handlersocket.cc:
Use my_global.h first
storage/spider/spd_db_mysql.cc:
Use my_global.h first
storage/spider/spd_db_oracle.cc:
Use my_global.h first
storage/spider/spd_direct_sql.cc:
Use my_global.h first
storage/spider/spd_i_s.cc:
Use my_global.h first
storage/spider/spd_malloc.cc:
Use my_global.h first
storage/spider/spd_param.cc:
Use my_global.h first
storage/spider/spd_ping_table.cc:
Use my_global.h first
storage/spider/spd_sys_table.cc:
Use my_global.h first
storage/spider/spd_table.cc:
Use my_global.h first
storage/spider/spd_trx.cc:
Use my_global.h first
storage/xtradb/handler/handler0alter.cc:
Use my_global.h first
storage/xtradb/handler/i_s.cc:
Use my_global.h first
Added comments
Ensure that tokudb test works even if jemalloc is not installed
Removed not referenced function Item::remove_fixed()
mysql-test/suite/rpl/t/rpl_gtid_reconnect.test:
Fixed race condition
sql/item.cc:
Indentation fix
sql/item.h:
Removed not used function
Added comment
sql/sql_select.cc:
Fixed indentation
storage/tokudb/mysql-test/rpl/include/have_tokudb.opt:
Ensure that tokudb test works even if jemalloc is not installed
storage/tokudb/mysql-test/tokudb/suite.opt:
Ensure that tokudb test works even if jemalloc is not installed
storage/tokudb/mysql-test/tokudb_add_index/suite.opt:
Ensure that tokudb test works even if jemalloc is not installed
storage/tokudb/mysql-test/tokudb_alter_table/suite.opt:
Ensure that tokudb test works even if jemalloc is not installed
storage/tokudb/mysql-test/tokudb_bugs/suite.opt:
Ensure that tokudb test works even if jemalloc is not installed
storage/tokudb/mysql-test/tokudb_mariadb/suite.opt:
Ensure that tokudb test works even if jemalloc is not installed
Fix test_if_skip_sort_order() logic:
WHEN
we use index X, which doesn't produce needed ordering, but there is
an index Y which does and has the same prefix as used prefix of X
THEN
don't just switch to using ref access on Y. If range(Y) would use more
key parts, use range(Y).
