CREATE/DROP TEMPORARY TABLE are not safe to optimistically replicate in
parallel with other transactions, so they need to be marked as "ddl" in the
binlog.
This was already done for stand-alone CREATE/DROP TEMPORARY. But temporary
tables can also be created and dropped inside a BEGIN...END transaction, and
such transactions were not marked as ddl. Nor was the DROP TEMPORARY TABLE
statement emitted implicitly when a client connection is closed.
So this patch adds such ddl mark for the missing cases.
The difference to Kristian's original patch is mainly a fix in
mysql_trans_commit_alter_copy_data() to remember the unsafe_rollback_flags
over the temporary commit.
Problem:- While running tests from wsrep suite , we include file have_wsrep.inc
or have_wsrep_enabled.inc , these file test wsrep plugin is ACTIVE or 'wsrep_on'
is ON. These select does not ensure that whether 'wsrep_ready' is ON , So that
we can process SQL queries. So sometimes we will get error like this
mysqltest: At line 81: query 'call mtr.check_testcase()' failed: 1047: WSREP has
not yet prepared node for application use not ok
Solution:- In file have_wsrep.inc and have_wsrep_enabled.inc we will include
wait_until_ready.inc , which will wait untill 'wsrep_on' is on
The XtraDB storage engine was already replaced by InnoDB
and disabled in MariaDB Server 10.2. Let us remove it altogether
to avoid dragging dead code around.
Replace some references to XtraDB with references to InnoDB.
rpl_get_position_info(): Remove.
Remove the mysql-test-run --suite=percona, because it only contains
tests specific to XtraDB, many of which were disabled already in
earlier MariaDB versions.
Rewrite the test encryption.innodb-checksum-algorithm not to
require any restarts or re-bootstrapping, and to cover all
innodb_page_size combinations.
Test innodb.101_compatibility with all innodb_page_size combinations.
innodb_page_size_small: A new set of combinations, for
innodb_page_size up to 16k. In MariaDB 10.0, this does not
make a difference, but in 10.1 and later, innodb_page_size
would cover 32k and 64k, for which ROW_FORMAT=COMPRESSED
is not available.
Enable these combinations in a few InnoDB tests.
The following options will be removed:
innodb_file_format
innodb_file_format_check
innodb_file_format_max
innodb_large_prefix
They have been deprecated in MySQL 5.7.7 (and MariaDB 10.2.2) in WL#7703.
The file_format column in two INFORMATION_SCHEMA tables will be removed:
innodb_sys_tablespaces
innodb_sys_tables
Code to update the file format tag at the end of page 0:5
(TRX_SYS_PAGE in the InnoDB system tablespace) will be removed.
When initializing a new database, the bytes will remain 0.
All references to the Barracuda file format will be removed.
Some references to the Antelope file format (meaning
ROW_FORMAT=REDUNDANT or ROW_FORMAT=COMPACT) will remain.
This basically ports WL#7704 from MySQL 8.0.0 to MariaDB 10.3.1:
commit 4a69dc2a95995501ed92d59a1de74414a38540c6
Author: Marko Mäkelä <marko.makela@oracle.com>
Date: Wed Mar 11 22:19:49 2015 +0200
The issue was that my_errno was not set properly when a repair was killed,
which confused the rpl_killed_ddl script.
I also added an extra test line in varchar.inc to ensure we don't give
duplicate error rows.
Initial support
tested against OpenSSL 1.0.1, 1.0.2, 1.1.0, Yassl and LibreSSL
not working on Windows with native SChannel support, due to wrong cipher
mapping: Latter one requires push of CONC-241 fixes.
Please note that OpenSSL 0.9.8 and OpenSSL 1.1.0 will not work: Even if
the build succeeds, test cases will fail with various errors, especially
when using different tls libraries or versions for client and server.
Also, include fixes by Vladislav Vaintroub to the
aws_key_management plugin. The AWS C++ SDK specifically depends on
OPENSSL_LIBRARIES, not generic SSL_LIBRARIES (such as YaSSL).
- Do not throw output of exec command, if disable_result_log is set
save and dump it if exec fails. Need tha to meaningfully analyze
errors from mariabackup.
- rmdir now removes the entire tree. need that because xtrabackup tests
clean the whole directory.
- all filesystem modifying commands now require the argument to
be under MYSQLTEST_VARDIR or MYSQL_TMP_DIR.
Simplify the tests that are present in MySQL 5.7. Make the table
smaller while generating enough undo log. Do not unnecessarily
drop tables.
trx_purge_initiate_truncate(): Remove two crash injection points
(before and after normal redo log checkpoint), because they are
not adding any value. Clarify some messages.
trx_sys_create_rsegs(): Display the number of active undo tablespaces.
srv_undo_tablespaces_init(): When initializing the data files, do not
leave srv_undo_tablespaces_active at 0.
Do not display that number; let trx_sys_create_rsegs() display it once
the final number is known.
innodb_params_adjust(): Adjust parameters after startup.
innobase_init(): Do not allow innodb_max_undo_size to be less
than SRV_UNDO_TABLESPACE_SIZE_IN_PAGES. This avoids unnecessary
repeated truncation of undo tablespaces when using
innodb_page_size=32k or innodb_page_size=64k.
* remove part of galera_var_cluster_address.test that can not be tested reliably
* reduce running time for galera_gcache_recover_manytrx.test
* Additional wait_conditions for GAL-401.test
Signed-off-by: Sachin Setiya <sachin.setiya@mariadb.com>
1. Special mode to search in error logs: if SEARCH_RANGE is not set,
the file is considered an error log and the search is performed
since the last CURRENT_TEST: line
2. Number of matches is printed too. "FOUND 5 /foo/ in bar".
Use greedy .* at the end of the pattern if number of matches
isn't stable. If nothing is found it's still "NOT FOUND",
not "FOUND 0".
3. SEARCH_ABORT specifies the prefix of the output.
Can be "NOT FOUND" or "FOUND" as before,
but also "FOUND 5 " if needed.
namely, restart_mysqld_with_option.inc and kill_and_restart_mysqld.inc -
use restart_mysqld.inc instead.
Also remove innodb_wl6501_crash_stripped.inc that wasn't used anywhere.
Also, implement MDEV-11027 a little differently from 5.5 and 10.0:
recv_apply_hashed_log_recs(): Change the return type back to void
(DB_SUCCESS was always returned).
Report progress also via systemd using sd_notifyf().
Because the default build configuration of the server will remain
at -DWITH_INNODB_AHI=ON, we want to test the instrumentation.
We make and revert the test adjustments in separate commits on purpose,
so that this commit can be easily reverted later if the default
build configuration is changed to -DWITH_INNODB_AHI=OFF.
The InnoDB adaptive hash index is sometimes degrading the performance of
InnoDB, and it is sometimes disabled to get more consistent performance.
We should have a compile-time option to disable the adaptive hash index.
Let us introduce two options:
OPTION(WITH_INNODB_AHI "Include innodb_adaptive_hash_index" ON)
OPTION(WITH_INNODB_ROOT_GUESS "Cache index root block descriptors" ON)
where WITH_INNODB_AHI always implies WITH_INNODB_ROOT_GUESS.
As part of this change, the misleadingly named function
trx_search_latch_release_if_reserved(trx) will be replaced with the macro
trx_assert_no_search_latch(trx) that will be empty unless
BTR_CUR_HASH_ADAPT is defined (cmake -DWITH_INNODB_AHI=ON).
We will also remove the unused column
INFORMATION_SCHEMA.INNODB_TRX.TRX_ADAPTIVE_HASH_TIMEOUT.
In MariaDB Server 10.1, it used to reflect the value of
trx_t::search_latch_timeout which could be adjusted during
row_search_for_mysql(). In 10.2, there is no such field.
Other than the removal of the unused column TRX_ADAPTIVE_HASH_TIMEOUT,
this is an almost non-functional change to the server when using the
default build options.
Some tests are adjusted so that they will work with both
-DWITH_INNODB_AHI=ON and -DWITH_INNODB_AHI=OFF. The test
innodb.innodb_monitor has been renamed to innodb.monitor
in order to track MySQL 5.7, and the duplicate tests
sys_vars.innodb_monitor_* are removed.
Revert the MDEV-4396 tweak to innodb.innodb_bug14676111.
We must fix the root cause instead.
Allow gcol.innodb_virtual_purge to run on a non-debug build
(If wait_innodb_all_purged.inc is used in a non-debug test,
it will have no effect.)
Add the test innodb.index_merge_threshold from MySQL 5.7.
