CMake rewriting the tests causes Mroonga to be un-buildable
on build environments where there source directory is read
only.
In the test results, the version wasn't particularly important.
Remove the version dependence of tests.
Updated tests: cases with bugs or which cannot be run
with the cursor-protocol were excluded with
"--disable_cursor_protocol"/"--enable_cursor_protocol"
Fix for v.10.5
This patch adds for "--ps-protocol" second execution
of queries "SELECT".
Also in this patch it is added ability to disable/enable
(--disable_ps2_protocol/--enable_ps2_protocol) second
execution for "--ps-prototocol" in testcases.
The 10.5 version of the patch.
Removing DEFAULT from INFORMATION_SCHEMA columns.
DEFAULT in read-only tables is rather meaningless.
Upgrade should go smoothly.
Also fixes:
MDEV-20254 Problems with EMPTY_STRING_IS_NULL and I_S tables
In main.index_merge_myisam we remove the test that was added in
commit a2d24def8c because
it duplicates the test case that was added in
commit 5af12e4635.
- multi_range_read_info_const now uses the new records_in_range interface
- Added handler::avg_io_cost()
- Don't calculate avg_io_cost() in get_sweep_read_cost if avg_io_cost is
not 1.0. In this case we trust the avg_io_cost() from the handler.
- Changed test_quick_select to use TIME_FOR_COMPARE instead of
TIME_FOR_COMPARE_IDX to align this with the rest of the code.
- Fixed bug when using test_if_cheaper_ordering where we didn't use
keyread if index was changed
- Fixed a bug where we didn't use index only read when using order-by-index
- Added keyread_time() to HEAP.
The default keyread_time() was optimized for blocks and not suitable for
HEAP. The effect was the HEAP prefered table scans over ranges for btree
indexes.
- Fixed get_sweep_read_cost() for HEAP tables
- Ensure that range and ref have same cost for simple ranges
Added a small cost (MULTI_RANGE_READ_SETUP_COST) to ranges to ensure
we favior ref for range for simple queries.
- Fixed that matching_candidates_in_table() uses same number of records
as the rest of the optimizer
- Added avg_io_cost() to JT_EQ_REF cost. This helps calculate the cost for
HEAP and temporary tables better. A few tests changed because of this.
- heap::read_time() and heap::keyread_time() adjusted to not add +1.
This was to ensure that handler::keyread_time() doesn't give
higher cost for heap tables than for normal tables. One effect of
this is that heap and derived tables stored in heap will prefer
key access as this is now regarded as cheap.
- Changed cost for index read in sql_select.cc to match
multi_range_read_info_const(). All index cost calculation is now
done trough one function.
- 'ref' will now use quick_cost for keys if it exists. This is done
so that for '=' ranges, 'ref' is prefered over 'range'.
- scan_time() now takes avg_io_costs() into account
- get_delayed_table_estimates() uses block_size and avg_io_cost()
- Removed default argument to test_if_order_by_key(); simplifies code
This was to remove a performance regression between 10.3 and 10.4
In 10.5 we will have a better implementation of records_in_range
that will enable us to get more statistics.
This change was not done in 10.4 because the 10.5 will be part of
a larger change that is not suitable for the GA 10.4 version
Other things:
- Changed default handler block_size to 8192 to fix things statistics
for engines that doesn't set the block size.
- Fixed a bug in spider when using multiple part const ranges
(Patch from Kentoku)
This allows one to run the test suite even if any of the following
options are changed:
- character-set-server
- collation-server
- join-cache-level
- log-basename
- max-allowed-packet
- optimizer-switch
- query-cache-size and query-cache-type
- skip-name-resolve
- table-definition-cache
- table-open-cache
- Some innodb options
etc
Changes:
- Don't print out the value of system variables as one can't depend on
them to being constants.
- Don't set global variables to 'default' as the default may not
be the same as the test was started with if there was an additional
option file. Instead save original value and reset it at end of test.
- Test that depends on the latin1 character set should include
default_charset.inc or set the character set to latin1
- Test that depends on the original optimizer switch, should include
default_optimizer_switch.inc
- Test that depends on the value of a specific system variable should
set it in the test (like optimizer_use_condition_selectivity)
- Split subselect3.test into subselect3.test and subselect3.inc to
make it easier to set and reset system variables.
- Added .opt files for test that required specfic options that could
be changed by external configuration files.
- Fixed result files in rockdsb & tokudb that had not been updated for
a while.
disable inplace alter for adding stored generated columns.
This fixes mroonga/storage.column_generated_stored_add_column failures
in ASAN_OPTIONS="abort_on_error=1" runs
Also, add a test case that shows the bug without ASAN.
The error message modified.
Then the TABLE_SHARE::error_table_name() implementation taken from 10.3,
to be used as a name of the table in this message.
Refactor get_datetime_value() not to create Item_cache_temporal(),
but do it always in ::fix_fields() or ::fix_length_and_dec().
Creating items at the execution time doesn't work very well with
virtual columns and check constraints that are fixed and executed
in different THDs.
otherwise we'd need to store sql_mode *per vcol*
(consider CREATE INDEX...) and how SHOW CREATE TABLE would
support that?
Additionally, get rid of vcol::expr_str, just to make sure
the string is always generated and never leaked in the
original form.
On Solaris mktime() adds one extra day to tm_mday field and returns appropriate
value for dates 1600-01-01 and earlier. That is 1600-01-01 becomes 1600-01-02.
Solaris mktime manual excerpts:
...
The tm_year member must be for year 1901 or later. Calendar
times before 20:45:52 UTC, December 13, 1901 or after
03:14:07 UTC, January 19, 2038 cannot be represented. Port-
able applications should not try to create dates before
00:00:00 UTC, January 1, 1970 or after 00:00:00 UTC, January
1, 2038.
...
The mktime() function assumes Gregorian dates. Times before
the adoption of the Gregorian calendar will not match his-
torial records.
...
According to manual Mroonga only supports dates and datetimes after 1900:
https://mariadb.com/kb/en/mariadb/about-mroonga/
Technically these tests cover unsupported values and should fail on all
platforms. Disable tests until the problem is fixed upstream.
Print default values for BLOB's.
This is a part commit for automatic changes to make the real commit smaller.
All changes here are related to that we now print DEFAULT NULL for blob and
text fields, like we do for all other fields.
- Better error from check_slave_param
- Better error message from TokuDB if it can't be compiled.
- Marked rpl_mixed_drop_create_temp_table and
rpl_stm_drop_create_temp_table as big tests to stop timeout
failures on power8
- Added sync_slave_with_master to semisync_future-7591 to
ensure that slave is up to date with master before calling
rpl_end.
- Disabled compiler warnings from connect and mroonga and on
MacOSX.
Mroonga:
- Fixed bug when testing if file is a normal file that can be deleted
- Marked a lot of date and datetime test to not run on macosx.
This is because mktime() can't handle negative years and this
restricts mroonga so that it can only store dates after the year 1900.
