Updated tests: cases with bugs or which cannot be run
with the cursor-protocol were excluded with
"--disable_cursor_protocol"/"--enable_cursor_protocol"
Fix for v.10.5
This patch adds for "--ps-protocol" second execution
of queries "SELECT".
Also in this patch it is added ability to disable/enable
(--disable_ps2_protocol/--enable_ps2_protocol) second
execution for "--ps-prototocol" in testcases.
rename to stress that is a specific hack for Item_func_nextval
and should not be used for other items.
If a vcol uses Item_func_nextval, a corresponding table for the sequence
should be added to the prelocking list (in that sense NEXTVAL is not
simply a function, but more like a subquery), see add_internal_tables()
in DML_prelocking_strategy::handle_table(). At the moment it is only
implemented for DEFAULT, not for GENERATED ALWAYS AS, thus the
VCOL_NEXTVAL hack.
extra2_read_len resolved by keeping the implementation
in sql/table.cc by exposed it for use by ha_partition.cc
Remove identical implementation in unireg.h
(ref: bfed2c7d57)
This is a duplicate of MDEV-18278 89936f11e9, but I will add an
additional assertion
Description:
The frm corruption should not be reported during CREATE TABLE. Normally
it doesn't, and the data to fill TABLE is taken by open_table_from_share
call. However, the vcol data is stored as SQL string in
table->s->vcol_defs.str and is anyway parsed on each table open.
It is impossible [or hard] to avoid, because it's hard to clone the
expression tree in general (it's easier to parse).
Normally parse_vcol_defs should only fail on semantic errors. If so,
error_reported is set to true. Any other failure is not expected during
table creation. There is either unhandled/unacknowledged error, or
something went really wrong, like memory reject. This all should be
asserted anyway.
Solution:
* Set *error_reported=true for the forward references check;
* Assert for every unacknowledged error during table creation.
Server crashes in Field::register_field_in_read_map upon select from
partitioned table with indexed by prefix virtual column.
After several read-mark fixes a problem has surfaced:
Since KEY (c(10),a) uses only a prefix of c, a new field is created,
duplicated from table->field[3], with a new length. However,
vcol_inco->expr is not copied.
Therefore, (*key_info)->key_part[i].field->vcol_info->expr was left NULL
in ha_partition::index_init().
Solution: copy vcol_info from table field when it's set up.
Server crashes in Field::register_field_in_read_map upon select from
partitioned table with indexed by prefix virtual column.
After several read-mark fixes a problem has surfaced:
Since KEY (c(10),a) uses only a prefix of c, a new field is created,
duplicated from table->field[3], with a new length. However,
vcol_inco->expr is not copied.
Therefore, (*key_info)->key_part[i].field->vcol_info->expr was left NULL
in ha_partition::index_init().
Solution: initialize vcols before key initialization
Also key initialization is moved to a function.
The columns that are part of DEFAULT expression were not read-marked
in statements like UPDATE...SET b=DEFAULT.
The problem is `F(DEFAULT)` expression depends of the left-hand side of an
assignment. However, setup_fields accepts only right-hand side value.
Neither Item::fix_fields does.
Suchwise, b=DEFAULT(b) works fine, because Item_default_field has
information on what field it is default of:
if (thd->mark_used_columns != MARK_COLUMNS_NONE)
def_field->default_value->expr->update_used_tables();
in Item_default_value::fix_fields().
It is not reasonable to pass a left-hand side to Item:fix_fields, because
the case is rare, so the rewrite
b= F(DEFAULT) -> b= F(DEFAULT(b))
is made instead.
Both UPDATE and multi-UPDATE are affected, however any form of INSERT
is not: it marks all the fields in DEFAULT expressions for read in
TABLE::mark_default_fields_for_write().
The problem is the same as in MDEV-18166: columns in virtual field
expression are not marked for read, while the field itself does.
field->register_field_in_read_map() should be called for read-marking all
fields.
The test is reproduced only in 10.4+, however the fix is applicable to
10.2+.
Several different test cases were failing under the same reason: the
fields in a vcol expression were not marked during marking columns of a key
contatining virtual column for read.
Fix: make marking columns of a key for read a special case where
register_field_in_read_map() is done instead of plain bitmap_set_bit().
Some test cases are only reproducible in 10.4+, but the fix is applicable
to 10.2+
This is a 10.2+ part of a jira task
The two bugs regarding virtual column marking have been fixed:
1. UPDATE of a partitioned table, where the optimizer has chosen a
secondary index to make a filesort;
2. INSERT into a table with a nonblob field generated from a blob, with
binlog enabled and binlog_row_image=noblob.
3. DELETE from a view on a table with virtual column.
Generally the assertion happens from update_virtual_fields() call
These bugs are root-caused by missing field marking for dependant fields
of a virtual column.
Therefore a fix is: mark all the fields involved in the vcol expression by
calling field->register_field_in_read_map() instead just setting a single
bit.
3 was reproducible only on 10.4+, however the problem might has just been
invisible in the earlier versions. The fix is applicable to 10.2-10.3 as
well.
The failing reason was inconsistent truncation rules: the value of virtual
column could have been evaluated to '2000' sometimes instead of '0000' for
value 'a'.
The reason why `c YEAR AS ('aaaa')` was not evaluated same is that len=4 is
a special case insidew Field_year::store.
The correct fix is: always evaluate a bad value to 0000 instead 2000.
The truncated values should be evaluated as usual.
$support_virtual_index is finally changed to 1 in gcol.gcol_ins_upd_innodb,
which is also enough for testing.
The test from original bug report is also added.
The assertion is improved: storage engines like myisam always have to store
at least one field, so the assertion does not cover tables with no stored
columns.
sql standard (2016) allows <collate clause> in two places in the
<column definition> - as a part of the <data type> or at the very end.
Let's do that too.
Side effect: in column/SP declaration `COLLATE cs_coll` automatically
implies `CHARACTER SET cs` (unless charset was specified explicitly).
See changes in sp-ucs2.result
Add a proper error handling of innobase_get_computed_value results in
row_upd_store_row/row_upd_store_v_row.
Also add an assertion in row_vers_build_clust_v_col to fail during row
purge.
Add one more assertion in row_sel_sec_rec_is_for_clust_rec for possible
future catches.
Add support of referential constraints directly in column defininions:
create table t1 (id1 int primary key);
create table t2 (id2 int references t1(id1));
Referenced field name can be omitted if equal to foreign field name:
create table t1 (id int primary key);
create table t2 (id int references t1);
Until 10.5 this syntax was understood by the parser but was silently
ignored.
In case of generated columns this syntax is disabled at parser level
by ER_PARSE_ERROR. Note that separate FOREIGN KEY clause for generated
columns is disabled at storage engine level.
This allows one to run the test suite even if any of the following
options are changed:
- character-set-server
- collation-server
- join-cache-level
- log-basename
- max-allowed-packet
- optimizer-switch
- query-cache-size and query-cache-type
- skip-name-resolve
- table-definition-cache
- table-open-cache
- Some innodb options
etc
Changes:
- Don't print out the value of system variables as one can't depend on
them to being constants.
- Don't set global variables to 'default' as the default may not
be the same as the test was started with if there was an additional
option file. Instead save original value and reset it at end of test.
- Test that depends on the latin1 character set should include
default_charset.inc or set the character set to latin1
- Test that depends on the original optimizer switch, should include
default_optimizer_switch.inc
- Test that depends on the value of a specific system variable should
set it in the test (like optimizer_use_condition_selectivity)
- Split subselect3.test into subselect3.test and subselect3.inc to
make it easier to set and reset system variables.
- Added .opt files for test that required specfic options that could
be changed by external configuration files.
- Fixed result files in rockdsb & tokudb that had not been updated for
a while.
