Updated tests: cases with bugs or which cannot be run
with the cursor-protocol were excluded with
"--disable_cursor_protocol"/"--enable_cursor_protocol"
Fix for v.10.5
Turning REGEXP_REPLACE into two schema-qualified functions:
- mariadb_schema.regexp_replace()
- oracle_schema.regexp_replace()
Fixing oracle_schema.regexp_replace(subj,pattern,replacement) to treat
NULL in "replacement" as an empty string.
Adding new classes implementing oracle_schema.regexp_replace():
- Item_func_regexp_replace_oracle
- Create_func_regexp_replace_oracle
Adding helper methods:
- String *Item::val_str_null_to_empty(String *to)
- String *Item::val_str_null_to_empty(String *to, bool null_to_empty)
and reusing these methods in both Item_func_replace and
Item_func_regexp_replace.
The problem is the test is skipped after sourcing include/master-slave.inc.
This leaves the slave threads running after the test is skipped, causing a
following test to fail during rpl setup.
Also rename have_normal_bzip.inc to the more appropriate _zlib.
Signed-off-by: Kristian Nielsen <knielsen@knielsen-hq.org>
The crash happened with an indexed virtual column whose
value is evaluated using a function that has a different meaning
in sql_mode='' vs sql_mode=ORACLE:
- DECODE()
- LTRIM()
- RTRIM()
- LPAD()
- RPAD()
- REPLACE()
- SUBSTR()
For example:
CREATE TABLE t1 (
b VARCHAR(1),
g CHAR(1) GENERATED ALWAYS AS (SUBSTR(b,0,0)) VIRTUAL,
KEY g(g)
);
So far we had replacement XXX_ORACLE() functions for all mentioned function,
e.g. SUBSTR_ORACLE() for SUBSTR(). So it was possible to correctly re-parse
SUBSTR_ORACLE() even in sql_mode=''.
But it was not possible to re-parse the MariaDB version of SUBSTR()
after switching to sql_mode=ORACLE. It was erroneously mis-interpreted
as SUBSTR_ORACLE().
As a result, this combination worked fine:
SET sql_mode=ORACLE;
CREATE TABLE t1 ... g CHAR(1) GENERATED ALWAYS AS (SUBSTR(b,0,0)) VIRTUAL, ...;
INSERT ...
FLUSH TABLES;
SET sql_mode='';
INSERT ...
But the other way around it crashed:
SET sql_mode='';
CREATE TABLE t1 ... g CHAR(1) GENERATED ALWAYS AS (SUBSTR(b,0,0)) VIRTUAL, ...;
INSERT ...
FLUSH TABLES;
SET sql_mode=ORACLE;
INSERT ...
At CREATE time, SUBSTR was instantiated as Item_func_substr and printed
in the FRM file as substr(). At re-open time with sql_mode=ORACLE, "substr()"
was erroneously instantiated as Item_func_substr_oracle.
Fix:
The fix proposes a symmetric solution. It provides a way to re-parse reliably
all sql_mode dependent functions to their original CREATE TABLE time meaning,
no matter what the open-time sql_mode is.
We take advantage of the same idea we previously used to resolve sql_mode
dependent data types.
Now all sql_mode dependent functions are printed by SHOW using a schema
qualifier when the current sql_mode differs from the function sql_mode:
SET sql_mode='';
CREATE TABLE t1 ... SUBSTR(a,b,c) ..;
SET sql_mode=ORACLE;
SHOW CREATE TABLE t1; -> mariadb_schema.substr(a,b,c)
SET sql_mode=ORACLE;
CREATE TABLE t2 ... SUBSTR(a,b,c) ..;
SET sql_mode='';
SHOW CREATE TABLE t1; -> oracle_schema.substr(a,b,c)
Old replacement names like substr_oracle() are still understood for
backward compatibility and used in FRM files (for downgrade compatibility),
but they are not printed by SHOW any more.
Changing the code handling sql_mode-dependent function DECODE():
- removing parser tokens DECODE_MARIADB_SYM and DECODE_ORACLE_SYM
- removing the DECODE() related code from sql_yacc.yy/sql_yacc_ora.yy
- adding handling of DECODE() with help of a new Create_func_func_decode
The problem is that s390x is not using the default bzip library we use
on other platforms, which causes compressed string lengths to be differnt
than what mtr tests expects.
Fixed by:
- Added have_normal_bzip.inc, which checks if compress() returns the
expected length.
- Adjust the results to match the expected one
- main.func_compress.test & archive.archive
- Don't print lengths that depends on compression library
- mysqlbinlog compress tests & connect.zip
- Don't print DATA_LENGTH for SET column_compression_zlib_level=1
- main.column_compression
This patch adds for "--ps-protocol" second execution
of queries "SELECT".
Also in this patch it is added ability to disable/enable
(--disable_ps2_protocol/--enable_ps2_protocol) second
execution for "--ps-prototocol" in testcases.
There was a memory leak under these conditions:
- YYABORT was called in the end-of-rule action of a rule containing expr_lex
- This expr_lex was not bound to any sp_lex_keeper
Bison did not call %destructor <expr_lex> in this case, because its stack
already contained a reduced upper-level rule.
Fixing rules starting with RETURN, CONTINUE, EXIT keywords:
Turning end-of-rule actions with YYABORT into mid-rule actions
by adding an empty trailing { } block. This prevents the upper level
rule from being reduced without calling %destructor <expr_lex>.
In other rules expr_lex is used not immediately before the last
end-of-rule { } block, so they don't need changes.
- Moving the code from a public function trim_whitespaces()
to the class Lex_cstring as methods. This code may
be useful in other contexts, and also this code becomes
visible inside sql_class.h
- Adding a helper method THD::strmake_lex_cstring_trim_whitespaces()
- Unifying the way how CREATE PROCEDURE/CREATE FUNCTION and
CREATE PACKAGE/CREATE PACKAGE BODY work:
a) Now CREATE PACKAGE/CREATE PACKAGE BODY also calls
Lex->sphead->set_body_start() to remember the cpp body start inside
an sp_head member.
b) adding a "const char *cpp_body_end" parameter to
sp_head::set_stmt_end().
These changes made it possible to reuse sp_head::set_stmt_end() inside
LEX::create_package_finalize() and remove the duplucate code.
- Renaming sp_head::m_body_begin to m_cpp_body_begin and adding a comment
to make it clear that this member is used only during parsing, and
points to a fragment inside the cpp buffer.
- Changed sp_head::set_body_start() and sp_head::set_stmt_end()
to skip the calls related to "body_utf8" in cases when m_parent is not NULL.
A non-NULL m_parent means that we're inside a package routine.
"body_utf8" in such case belongs not to the current sphead itself,
but to parent (the package) sphead.
So an sphead instance of a package routine should neither initialize,
nor finalize, nor change in any other ways the "body_utf8" related
members of Lex_input_stream, and should not take over or copy "body_utf8"
data from Lex_input_stream to "this".
- Adding optional qualifiers to data types:
CREATE TABLE t1 (a schema.DATE);
Qualifiers now work only for three pre-defined schemas:
mariadb_schema
oracle_schema
maxdb_schema
These schemas are virtual (hard-coded) for now, but may turn into real
databases on disk in the future.
- mariadb_schema.TYPE now always resolves to a true MariaDB data
type TYPE without sql_mode specific translations.
- oracle_schema.DATE translates to MariaDB DATETIME.
- maxdb_schema.TIMESTAMP translates to MariaDB DATETIME.
- Fixing SHOW CREATE TABLE to use a qualifier for a data type TYPE
if the current sql_mode translates TYPE to something else.
The above changes fix the reported problem, so this script:
SET sql_mode=ORACLE;
CREATE TABLE t2 AS SELECT mariadb_date_column FROM t1;
is now replicated as:
SET sql_mode=ORACLE;
CREATE TABLE t2 (mariadb_date_column mariadb_schema.DATE);
and the slave can unambiguously treat DATE as the true MariaDB DATE
without ORACLE specific translation to DATETIME.
Similar,
SET sql_mode=MAXDB;
CREATE TABLE t2 AS SELECT mariadb_timestamp_column FROM t1;
is now replicated as:
SET sql_mode=MAXDB;
CREATE TABLE t2 (mariadb_timestamp_column mariadb_schema.TIMESTAMP);
so the slave treats TIMESTAMP as the true MariaDB TIMESTAMP
without MAXDB specific translation to DATETIME.
Problem:
========
During point in time recovery of binary log syntax error is reported for
BEGIN statement and recovery fails.
Analysis:
=========
In MariaDB 10.3 and later, setting the sql_mode system variable to Oracle
allows the server to understand a subset of Oracle's PL/SQL language. When
sql_mode=ORACLE is set, it switches the parser from the MariaDB parser to
Oracle compatible parser. With this change 'BEGIN' is not considered as
'START TRANSACTION'. Hence the syntax error is reported.
Fix:
===
At preset 'BEGIN' query is generated from 'Gtid_log_event::print'. The current
session specific 'sql_mode' information is not present as part of
'Gtid_log_event'. If it was available then, mysqlbinlog tool can make use of
'sql_mode == ORACLE' and can output "START TRANSACTION" in this particular
mode and for other sql_modes it will write "BEGIN" as part of output. Since it
is not available 'mysqlbinlog' tool will output all 'BEGIN' statements as
'START TRANSACTION' irrespective of 'sql_mode'.
When backpatching a forward GOTO label, the old code erroneously
used CURSOR/HANDLER difference between context frames "c" and "a" to tune
a cpop/hpop command. So the cpop/hpop command later tried to pop
all cursors/handlers declared between "a" and "c", but those between
"b" and "c" were not cpushed/hpoped yet during the execution of "GOTO x".
Fixing the code to use the difference between frames "b" and "a" only.
BEGIN -- a
...
GOTO x; -- b
...
<<x>> -- c
...
END -- d
