A fix and a test case for Bug#34898 "mysql_info() reports 0 warnings
while mysql_warning_count() reports 1"
Review the patch by Chad Miller, implement review comments
(since Chad left) and push the patch.
This bug is actually not a bug. At least according to Monty.
See Bug#841 "wrong number of warnings" reported back in July 2003
and closed as "not a bug".
mysql_info() was printing the number of truncated columns, not
the number of warnings.
But since the message of mysql_info() was "Warnings: <number of truncated
columns>", people would expect to get the number
of warnings in it, not the number of truncated columns.
So a possible fix would be to change the message of mysql_info()
to say Rows changed: <n>, truncated: <m>.
Instead, put the number of warnings there. That is, remove the
feature that thd->cuted_fields (the number of truncated fields)
is exposed to the client. The number of truncated columns can be
calculated on the client, by analyzing SHOW WARNINGS output,
and in future we may remove thd->cuted_fields altogether.
So let's have one less thing to worry about.
client/mysqltest.cc:
Fix a bug in mysqltest program which used to return
a wrong number of affected rows in ps-protocol, and a wrong
mysql_info() information in both protocols in presence of warnings.
mysql-test/r/insert.result:
Update results (Bug#34898)
mysql-test/suite/rpl/r/rpl_udf.result:
Update to the changed output of mysqltest: mysql_info() is now printed
before warnings.
mysql-test/t/insert.test:
Add a test case for Bug#34898.
sql/sql_table.cc:
A fix for Bug#34898 - report statement warn count, not the
number of truncated values in mysql_info().
sql/sql_update.cc:
A fix for Bug#34898 - report statement warn count, not the
number of truncated values in mysql_info().
A fix and a test case for Bug#34898 "mysql_info() reports 0 warnings
while mysql_warning_count() reports 1"
Review the patch by Chad Miller, implement review comments
(since Chad left) and push the patch.
This bug is actually not a bug. At least according to Monty.
See Bug#841 "wrong number of warnings" reported back in July 2003
and closed as "not a bug".
mysql_info() was printing the number of truncated columns, not
the number of warnings.
But since the message of mysql_info() was "Warnings: <number of truncated
columns>", people would expect to get the number
of warnings in it, not the number of truncated columns.
So a possible fix would be to change the message of mysql_info()
to say Rows changed: <n>, truncated: <m>.
Instead, put the number of warnings there. That is, remove the
feature that thd->cuted_fields (the number of truncated fields)
is exposed to the client. The number of truncated columns can be
calculated on the client, by analyzing SHOW WARNINGS output,
and in future we may remove thd->cuted_fields altogether.
So let's have one less thing to worry about.
Implemented the server infrastructure for the fix:
1. Added a function LEX_STRING *thd_query_string(THD) to return
a LEX_STRING structure instead of char *.
This is the function that must be called in innodb instead of
thd_query()
2. Did some encapsulation in THD : aggregated thd_query and
thd_query_length into a LEX_STRING and made accessor and mutator
methods for easy code updating.
3. Updated the server code to use the new methods where applicable.
Implemented the server infrastructure for the fix:
1. Added a function LEX_STRING *thd_query_string(THD) to return
a LEX_STRING structure instead of char *.
This is the function that must be called in innodb instead of
thd_query()
2. Did some encapsulation in THD : aggregated thd_query and
thd_query_length into a LEX_STRING and made accessor and mutator
methods for easy code updating.
3. Updated the server code to use the new methods where applicable.
storing and restoring information about foreign keys in the .FRM files and
properly displaying it in SHOW CREATE TABLE output and I_S tables.
The idea of this patch is to change type of Key_part_spec::field_name and
Key::name to LEX_STRING in order to avoid extra strlen() calls during
semantic analysis and statement execution, particularly, in code to be
implemented on the 2nd milestone of WL#148.
Note that since we are not using LEX_STRING everywhere yet (e.g. in
Create_field and KEY) and we want to limit scope of our changes we
have to do strlen() in places where we create Key and Key_part_spec
instances from objects using plain (char*) for strings. These calls
will go away during the process of further (char*) -> LEX_STRING
refactoring.
We have introduced these changes in 6.0 and backported them to 5.5
tree to make people aware of these changes as early as possible and
to simplify merges with mysql-fk and mysql-6.1-fk trees.
No test case is needed since this patch does not introduce any
user visible changes.
sql/sql_class.cc:
Key_part_spec::field_name is now LEX_STRING. Adjusted code accordingly.
sql/sql_class.h:
Changed type of Key_part_spec::field_name and Key::name to LEX_STRING in
order to avoid extra strlen() calls in code responsible for semantic
analysis and statement execution (e.g. in future code responsible for
saving/restoring info about foreign keys).
sql/sql_lex.cc:
Moved null_lex_str from sql_yacc.yy to sql_lex.cc and added its
declaration to sql_lex.h to make it accessible in other SQL-layer
modules (e.g. sql_parse.cc).
sql/sql_lex.h:
Made null_lex_str accessible from outside of sql_lex.cc.
sql/sql_parse.cc:
Key_part_spec::field_name and Key::name are now LEX_STRING. Adjusted
code accordingly.
sql/sql_table.cc:
Adjusted code to accomodate change of type to LEX_STRING for
Key_part_spec::field_name and Key::name.
sql/sql_yacc.yy:
Now Key::name and Key_part_spec::field_name are LEX_STRINGs. Adjusted
grammar to be able properly initialize them. This should allow us to
save on some strlen() calls during later stages of statement execution.
storing and restoring information about foreign keys in the .FRM files and
properly displaying it in SHOW CREATE TABLE output and I_S tables.
The idea of this patch is to change type of Key_part_spec::field_name and
Key::name to LEX_STRING in order to avoid extra strlen() calls during
semantic analysis and statement execution, particularly, in code to be
implemented on the 2nd milestone of WL#148.
Note that since we are not using LEX_STRING everywhere yet (e.g. in
Create_field and KEY) and we want to limit scope of our changes we
have to do strlen() in places where we create Key and Key_part_spec
instances from objects using plain (char*) for strings. These calls
will go away during the process of further (char*) -> LEX_STRING
refactoring.
We have introduced these changes in 6.0 and backported them to 5.5
tree to make people aware of these changes as early as possible and
to simplify merges with mysql-fk and mysql-6.1-fk trees.
No test case is needed since this patch does not introduce any
user visible changes.
An ALTER TABLE statement which added a column and added
a non-partial index on it failed with:
"ERROR 1089 (HY000): Incorrect sub part key; the used
key part isn't a string, the used length is longer than
the key part, or the storage engine doesn't support unique
sub keys"
In a check introduced to fix an earlier bug (no. 26794),
to allow for indices on spatial type columns, the
test expression was flawed (a logical OR was used instead
of a logical AND), which led to this regression.
The code in question does a sanity check on the key, and
the flawed code mistakenly classified any index created
in the way specified above as a partial index. Since
many data types does not allow partial indices, the
statement would fail.
An ALTER TABLE statement which added a column and added
a non-partial index on it failed with:
"ERROR 1089 (HY000): Incorrect sub part key; the used
key part isn't a string, the used length is longer than
the key part, or the storage engine doesn't support unique
sub keys"
In a check introduced to fix an earlier bug (no. 26794),
to allow for indices on spatial type columns, the
test expression was flawed (a logical OR was used instead
of a logical AND), which led to this regression.
The code in question does a sanity check on the key, and
the flawed code mistakenly classified any index created
in the way specified above as a partial index. Since
many data types does not allow partial indices, the
statement would fail.
lowercasing table name".
In lower_case_table_names > 0 mode some queries to I_S left entries
with incorrect key in table definition cache. This wasted memory and
caused some of the further queries to I_S to produce stale results
in cases when table definition was changed by a DDL statement.
Also in combination with similar problem in CREATE TABLE (which also
has peeked into table definition cache using non-normalized key) this
issue led to to spurious ER_TABLE_EXISTS_ERROR errors when one tried
to create a table with the same name as a previously existing but
dropped table (assuming that table name contained characters in upper
case).
This problem occured due to fact that fill_schema_table_from_frm()
was not properly normalizing (lowercasing) database and table names
which it used for lookups in table definition cache.
This fix adds proper normalization to this function. It also solves
similar problem in CREATE TABLE's code by ensuring that it uses
properly normalized version of table name when it peeks into table
definition cache instead of non-normalized one.
mysql-test/r/lowercase_table2.result:
Added test for #44738 "fill_schema_table_from_frm() opens tables
without lowercasing table name".
mysql-test/t/lowercase_table2.test:
Added test for #44738 "fill_schema_table_from_frm() opens tables
without lowercasing table name".
sql/sql_show.cc:
Normalize database and table name before using them for looking
up entry in table definition cache.
sql/sql_table.cc:
Ensure that CREATE TABLE uses properly normalized version of table
name when it peeks into table definition cache.
lowercasing table name".
In lower_case_table_names > 0 mode some queries to I_S left entries
with incorrect key in table definition cache. This wasted memory and
caused some of the further queries to I_S to produce stale results
in cases when table definition was changed by a DDL statement.
Also in combination with similar problem in CREATE TABLE (which also
has peeked into table definition cache using non-normalized key) this
issue led to to spurious ER_TABLE_EXISTS_ERROR errors when one tried
to create a table with the same name as a previously existing but
dropped table (assuming that table name contained characters in upper
case).
This problem occured due to fact that fill_schema_table_from_frm()
was not properly normalizing (lowercasing) database and table names
which it used for lookups in table definition cache.
This fix adds proper normalization to this function. It also solves
similar problem in CREATE TABLE's code by ensuring that it uses
properly normalized version of table name when it peeks into table
definition cache instead of non-normalized one.
In RBR, 'DROP TEMPORARY TABLE IF EXISTS...' statement is binlogged when the table
does not exist.
In fact, 'DROP TEMPORARY TABLE ...' statement should never be binlogged in RBR
no matter if the table exists or not.
This patch addresses this by checking whether we are dropping a
temporary table or not, when building the custom drop statement.
In RBR, 'DROP TEMPORARY TABLE IF EXISTS...' statement is binlogged when the table
does not exist.
In fact, 'DROP TEMPORARY TABLE ...' statement should never be binlogged in RBR
no matter if the table exists or not.
This patch addresses this by checking whether we are dropping a
temporary table or not, when building the custom drop statement.
Invalid (old?) table or database name in logs
Problem was still not completely fixed, due to
qouting.
This is the server side only fix (in explain_filename),
the change from filename_to_tablename to use explain_filename
in the InnoDB code must be done before the bug is
fixed.
mysql-test/include/have_not_innodb_plugin.inc:
Bug#32430: 'show innodb status' causes errors
Invalid (old?) table or database name in logs
Added include file to allow test for only the
'old' built-in innodb engine
mysql-test/r/not_true.require:
Bug#32430: 'show innodb status' causes errors
Invalid (old?) table or database name in logs
Added require to match 'not' TRUE
mysql-test/r/partition_innodb_builtin.result:
Bug#32430: 'show innodb status' causes errors
Invalid (old?) table or database name in logs
New result file for partitioning specific to
the 'old' built-in innodb engine
mysql-test/r/partition_innodb_plugin.result:
Bug#32430: 'show innodb status' causes errors
Invalid (old?) table or database name in logs
New result file for partitioning specific to
the new plugin innodb engine
mysql-test/t/disabled.def:
Bug#32430: 'show innodb status' causes errors
Invalid (old?) table or database name in logs
Disabling the new test until the fix is
included in the InnoDB source too.
mysql-test/t/partition_innodb_builtin.test:
Bug#32430: 'show innodb status' causes errors
Invalid (old?) table or database name in logs
New test file for partitioning specific to
the 'old' built-in innodb engine
mysql-test/t/partition_innodb_plugin.test:
Bug#32430: 'show innodb status' causes errors
Invalid (old?) table or database name in logs
New test file for partitioning specific to
the new plugin innodb engine
sql/mysql_priv.h:
Bug#32430: 'show innodb status' causes errors
Invalid (old?) table or database name in logs
Added thd as a parameter to explain_filename
to be able to use the correct quote character
sql/sql_table.cc:
Bug#32430: 'show innodb status' causes errors
Invalid (old?) table or database name in logs
Changed explain_filename, so that it does qouting
correctly according to the sessions qoute char.
Invalid (old?) table or database name in logs
Problem was still not completely fixed, due to
qouting.
This is the server side only fix (in explain_filename),
the change from filename_to_tablename to use explain_filename
in the InnoDB code must be done before the bug is
fixed.
checksum)"
The problem was that checksum of GEOMETRY type used memory addresses
in the computation, making it un-repeatable thus useless.
(This patch is a backport from 6.0 branch)
mysql-test/r/myisam.result:
test case for bug35570 that same tables give same checksums
mysql-test/t/myisam.test:
test case for bug35570 that same tables give same checksums
sql/sql_table.cc:
Type GEOMETRY is implemented on top of type BLOB, so, just like for BLOB,
its 'field' contains pointers which it does not make sense to include in
the checksum; it rather has to be converted to a string and then we can
compute the checksum.
checksum)"
The problem was that checksum of GEOMETRY type used memory addresses
in the computation, making it un-repeatable thus useless.
(This patch is a backport from 6.0 branch)
Despite copying the value of the old table's row type
we don't always have to mark row type as being specified.
Innodb uses this to check if it can do fast ALTER TABLE
or not.
Fixed by correctly flagging the presence of row_type
only when it's actually changed.
Added a test case for 39200.
Despite copying the value of the old table's row type
we don't always have to mark row type as being specified.
Innodb uses this to check if it can do fast ALTER TABLE
or not.
Fixed by correctly flagging the presence of row_type
only when it's actually changed.
Added a test case for 39200.
partial backport of bug43138 fix
mysql-test/r/warnings.result:
test result
mysql-test/t/warnings.test:
test case
sql/sql_class.cc:
partial backport of bug43138 fix
sql/sql_class.h:
partial backport of bug43138 fix
sql/sql_table.cc:
partial backport of bug43138 fix
