having clause...
The fix for bug 46184 was not very complete. It was not covering
views using temporary tables and multiple tables in a FROM clause.
Fixed by reverting the fix for 46184 and making a more general
check that is checking at the right execution stage and for all
of the non-supported cases.
Now PROCEDURE ANALYZE on non-top level SELECT is also forbidden.
Updated the analyse.test and subselect.test accordingly.
having clause...
The fix for bug 46184 was not very complete. It was not covering
views using temporary tables and multiple tables in a FROM clause.
Fixed by reverting the fix for 46184 and making a more general
check that is checking at the right execution stage and for all
of the non-supported cases.
Now PROCEDURE ANALYZE on non-top level SELECT is also forbidden.
Updated the analyse.test and subselect.test accordingly.
Queries with nested outer joins may lead to crashes or
bad results because an internal data structure is not handled
correctly.
The optimizer uses bitmaps of nested JOINs to determine
if certain table can be placed at a certain place in the
JOIN order.
It does maintain a bitmap describing in which JOINs
last placed table is nested.
When it puts a table it makes sure the bit of every JOIN that
contains the table in question is set (because JOINs can be nested).
It does that by recursively setting the bit for the next enclosing
JOIN when this is the first table in the JOIN and recursively
resetting the bit if it's the last table in the JOIN.
When it removes a table from the join order it should do the
opposite : recursively unset the bit if it's the only remaining
table in this join and and recursively set the bit if it's removing
the last table of a JOIN.
There was an error in how the bits was set for the upper levels :
when removing a table it was setting the bit for all the enclosing
nested JOINs even if there were more tables left in the current JOIN
(which practically means that the upper nested JOINs were not affected).
Fixed by stopping the recursion at the relevant level.
mysql-test/r/join.result:
Bug #42116: test case
mysql-test/t/join.test:
Bug #42116: test case
sql/sql_select.cc:
Bug #41116: don't go up and set the bits if more tables in
at the current JOIN level
Queries with nested outer joins may lead to crashes or
bad results because an internal data structure is not handled
correctly.
The optimizer uses bitmaps of nested JOINs to determine
if certain table can be placed at a certain place in the
JOIN order.
It does maintain a bitmap describing in which JOINs
last placed table is nested.
When it puts a table it makes sure the bit of every JOIN that
contains the table in question is set (because JOINs can be nested).
It does that by recursively setting the bit for the next enclosing
JOIN when this is the first table in the JOIN and recursively
resetting the bit if it's the last table in the JOIN.
When it removes a table from the join order it should do the
opposite : recursively unset the bit if it's the only remaining
table in this join and and recursively set the bit if it's removing
the last table of a JOIN.
There was an error in how the bits was set for the upper levels :
when removing a table it was setting the bit for all the enclosing
nested JOINs even if there were more tables left in the current JOIN
(which practically means that the upper nested JOINs were not affected).
Fixed by stopping the recursion at the relevant level.
Item_sum::set_aggregator() may be called multiple times during query preparation.
On subsequent calls: verify that the aggregator type is the same,
and re-use the existing Aggregator.
sql/item_sum.cc:
In Item_sum::set_aggregator(): re-use existing Aggregator if already set.
Remove some friend declarations, add some accessor functions.
Cleanup some DBUG_ENTER and DBUG_RETURN code.
sql/item_sum.h:
Make some member fields private, add accessors instead.
Remove some un-necessary friend declarations.
Remove some default arguments from constructors.
sql/opt_sum.cc:
Use accessor functions in Item_sum.
sql/sql_select.cc:
Fix mis-spelled DBUG_ENTER text.
Use accessor functions in Item_sum.
sql/sql_yacc.yy:
Use explicit true/false rather than default arguments when constructing
Item_sum_xxx objects.
Item_sum::set_aggregator() may be called multiple times during query preparation.
On subsequent calls: verify that the aggregator type is the same,
and re-use the existing Aggregator.
- Added checking of return value for system(), freopen(), fgets() and chown()
- Ensure that calls that require a format strings gets a format string
- Other trivial things
Updated test suite results (especially for pbxt and embedded server)
Removed warning for "Invalid (old?) table or database name 'mysqld.1'" from pbxt tests
Speed up some pbxt tests by inserting begin ; commit; around "while loops with inserts"
Added mysqld startup option '--debug-flush'
Create maria_recovery.trace in data directory instead of current directory
client/mysql.cc:
Check return value from system()
client/mysql_upgrade.c:
Check return value from fgets()
client/mysqladmin.cc:
Check return value from fgets()
client/mysqlslap.c:
Check return value from system() (but ignore it, as it's not critical)
extra/yassl/src/crypto_wrapper.cpp:
Check return value from fgets() (but ignore it, as it's internal file)
extra/yassl/taocrypt/src/aes.cpp:
Added extra {} to remove compiler warning
extra/yassl/taocrypt/src/blowfish.cpp:
Added extra {} to remove compiler warning
extra/yassl/taocrypt/src/misc.cpp:
Ifdef not used code
include/mysys_err.h:
Added error message for failing chown()
mysql-test/mysql-test-run.pl:
Don't give warning for skipping ndbcluster (never enabled in MariaDB)
mysql-test/suite/funcs_1/r/is_columns_is_embedded.result:
Update with new information schema information
mysql-test/suite/funcs_1/r/is_tables_is_embedded.result:
New test
mysql-test/suite/funcs_1/r/is_tables_myisam_embedded.result:
Update test results (has not been tested for a long time)
mysql-test/suite/funcs_1/r/is_tables_mysql_embedded.result:
Update test results (has not been tested for a long time)
mysql-test/suite/funcs_1/t/is_tables_is.test:
Don't run with embedded server (as results differ)
I added a new test for embedded server
mysql-test/suite/funcs_1/t/is_tables_is_embedded.test:
New test
mysql-test/suite/pbxt/my.cnf:
Allow one to run pbxt tests without having to specify --mysqld=--default-storage-engine=pbxt
mysql-test/suite/pbxt/t/count_distinct3.test:
Speed up test by inserting begin; ... commit;
mysql-test/suite/pbxt/t/subselect.test:
Speed up test by inserting begin; ... commit;
mysys/errors.c:
Added error message for failing chown()
mysys/my_copy.c:
Added error message for failing chown()
mysys/my_redel.c:
Added error message for failing chown()
mysys/safemalloc.c:
Added cast to get rid of compiler warning
sql/ha_partition.cc:
Fixed wrong argument to sql_print_error() (it requires a format string)
sql/log.cc:
Test return value of freopen()
sql/mysqld.cc:
Test return value of freopen()
Added startup option '--debug-flush' to be used when one gets a core dump (easy to explain to people on IRC)
sql/rpl_rli.cc:
Fixed wrong argument to sql_print_error() (it requires a format string)
sql/set_var.cc:
Added {} to get rid of compiler warnings
sql/slave.cc:
Fixed wrong argument to mi->report() and sql_print...() (they require a format string)
sql/sql_cache.cc:
Fixed wrong argument to sql_printinformation() (it requires a format string)
sql/sql_parse.cc:
Test return value of fgets()
sql/sql_plugin.cc:
Fixed wrong argument to sql_print_error() (it requires a format string)
sql/sql_select.cc:
Use unique table name for internal temp tables instead of full path
(Simple speed & space optimization)
sql/udf_example.c:
Removed compiler warning about not used variable
storage/maria/ha_maria.cc:
Fixed wrong argument to sql_print_error() and ma_check_print_error() (they require a format string)
storage/maria/ma_recovery.c:
Create maria_recovery.trace in data directory instead of current directory
storage/maria/unittest/ma_test_loghandler-t.c:
Fixed wrong argument to ok(); Requires a format string
storage/pbxt/src/strutil_xt.cc:
Detect temporary tables by checking if that path for the table is in the mysql data directory.
The database for temporary tables is after this patch, from PBXT point of view, ""
This is needed to stop PBXT from calling filename_to_tablename() with the base directory as an argument, which caused
ERROR: Invalid (old?) table or database name 'mysqld.1'" in the log when running the test suite.
tests/mysql_client_test.c:
Fixed compiler warnings
unittest/mysys/base64-t.c:
Fixed wrong argument to diag() (it requires a format string)
Added a comment that the current 'print' of differing buffers doesn't print the right thing,
but didn't fix this as it's not important (unless we find a bug in the real code)
2630.39.1, 2630.28.29, 2630.34.3, 2630.34.2, 2630.34.1, 2630.29.29,
2630.29.28, 2630.31.1, 2630.28.13, 2630.28.10, 2617.23.14 and
some other minor revisions.
This patch implements:
WL#4264 "Backup: Stabilize Service Interface" -- all the
server prerequisites except si_objects.{h,cc} themselves (they can
be just copied over, when needed).
WL#4435: Support OUT-parameters in prepared statements.
(and all issues in the initial patches for these two
tasks, that were discovered in pushbuild and during testing).
Bug#39519: mysql_stmt_close() should flush all data
associated with the statement.
After execution of a prepared statement, send OUT parameters of the invoked
stored procedure, if any, to the client.
When using the binary protocol, send the parameters in an additional result
set over the wire. When using the text protocol, assign out parameters to
the user variables from the CALL(@var1, @var2, ...) specification.
The following refactoring has been made:
- Protocol::send_fields() was renamed to Protocol::send_result_set_metadata();
- A new Protocol::send_result_set_row() was introduced to incapsulate
common functionality for sending row data.
- Signature of Protocol::prepare_for_send() was changed: this operation
does not need a list of items, the number of items is fully sufficient.
The following backward incompatible changes have been made:
- CLIENT_MULTI_RESULTS is now enabled by default in the client;
- CLIENT_PS_MULTI_RESUTLS is now enabled by default in the client.
include/mysql.h:
Add a new flag to MYSQL_METHODS::flush_use_result
function pointer. This flag determines if all results
should be flushed or only the first one:
- if flush_all_results is TRUE, then cli_flush_use_result()
will read/flush all pending results. I.e. it will read
all packets while server status attribute indicates that
there are more results. This is a new semantic, required
to fix the bug.
- if flush_all_results is FALSE, the old sematic
is preserved -- i.e. cli_flush_use_result() reads data
until first EOF-packet.
include/mysql.h.pp:
Update the ABI with new calls (compatible changes).
include/mysql_com.h:
Add CLIENT_PS_OUT_PARAMS -- a client capability indicating that the client supportsю
libmysql/libmysql.c:
Add mysql_stmt_next_result() -- analogue of mysql_next_result() for binary protocol.
Fix a minor bug in alloc_fields() -- not all members were copied over,
and some only shallow-copied (catalog).
Flush all results in mysql_stmt_close() (Bug#39519).
libmysqld/lib_sql.cc:
Rename send_fields() -> send_result_set_metadata().
Refactoring: change prepare_for_send() so that it accepts only
what it really needs -- a number of elements in the list.
mysql-test/r/ps.result:
Update results: WL#4435.
mysql-test/t/ps.test:
WL#4435: A test case for an SQL-part of the problem.
sql-common/client.c:
Bug#39519.
Implement new functionality in cli_flush_use_result():
if flush_all_delete is TRUE, then it should read/flush
all pending results.
sql/Makefile.am:
Add a new header sql_prepare.h to the list
of build headers.
sql/events.cc:
Rename: Protocol::send_fields() ->
Protocol::send_result_set_metadata().
sql/handler.cc:
Rename: Protocol::send_fields() ->
Protocol::send_result_set_metadata().
sql/mysql_priv.h:
Move sql_prepare.cc-specific declarations to a new
header - sql_prepare.h.
sql/procedure.h:
Rename: Protocol::send_fields() ->
Protocol::send_result_set_metadata().
sql/protocol.cc:
Move the logic responsible for sending of one result
set row to the Protocol class. Define a template
for end-of-statement action.
Refactoring: change prepare_for_send() so that it accepts
only what it really needs -- a number of elements in the list.
Rename send_fields() to send_result_set_metadata().
sql/protocol.h:
Update with new declarations (WL#4435).
Rename send_fields() -> send_result_set_metadata().
prepare_for_send() only needs the number of columns to send,
and doesn't use the item list - update signature to require
only what's needed.
Add a new protocol type -- Protocol_local.
sql/repl_failsafe.cc:
Rename: Protocol::send_fields() ->
Protocol::send_result_set_metadata().
sql/slave.cc:
Rename: Protocol::send_fields() ->
Protocol::send_result_set_metadata().
sql/sql_acl.cc:
Rename: Protocol::send_fields() ->
Protocol::send_result_set_metadata().
sql/sql_base.cc:
Include sql_prepare.h (for Reprepare_observer).
sql/sql_cache.cc:
Extend the query cache flags block to be able
to store a numeric id for the result format,
not just a flag binary/non-binary.
sql/sql_class.cc:
Update to use the rename of Protocol::send_fields()
to Protocol::send_result_set_metadata().
Use Protocol::send_one_result_set_row().
sql/sql_class.h:
Move the declaration of Reprepare_observer to the
new header - sql_prepare.h.
Update to the new signature of class Protocol::send_fields().
sql/sql_connect.cc:
Use a protocol template method instead of
raw NET layer API at the end of a statement.
sql/sql_cursor.cc:
Rename: Protocol::send_fields() ->
Protocol::send_result_set_metadata().
sql/sql_error.cc:
Rename: Protocol::send_fields() ->
Protocol::send_result_set_metadata().
sql/sql_handler.cc:
Rename: Protocol::send_fields() ->
Protocol::send_result_set_metadata().
Use new method Protocol::send_one_result_set_row().
sql/sql_help.cc:
Rename: Protocol::send_fields() ->
Protocol::send_result_set_metadata().
sql/sql_lex.cc:
Initialize multi_statements variable.
Add a handy constant for empty lex
string.
sql/sql_lex.h:
Add a separate member for a standalone
parsing option - multi-statements support.
sql/sql_list.cc:
sql_list.h is a standalone header now,
no need to include mysql_priv.h.
sql/sql_list.h:
Make sql_list.h a stand-alone header.
sql/sql_parse.cc:
Include sql_prepare.h for prepared
statements- related declarations.
Use a new Protocol template method to end
each statement (send OK, EOF or ERROR to
the client).
sql/sql_prepare.cc:
Implement Execute Direct API (WL#4264),
currently unused. It will be used by the service
interface (Backup).
Use a new header - sql_prepare.h.
Add support for OUT parameters in the
binary and text protocol (prepared statements
only).
sql/sql_prepare.h:
Add a new header to contain (for now)
all prepared statement- external
related declarations.
sql/sql_profile.cc:
Rename: Protocol::send_fields() ->
Protocol::send_result_set_metadata().
sql/sql_repl.cc:
Rename: Protocol::send_fields() ->
Protocol::send_result_set_metadata().
sql/sql_select.cc:
Rename: Protocol::send_fields() ->
Protocol::send_result_set_metadata().
sql/sql_show.cc:
Rename: Protocol::send_fields() ->
Protocol::send_result_set_metadata().
sql/sql_string.h:
Add a way to convert a String to LEX_STRING.
sql/sql_table.cc:
Rename: Protocol::send_fields() ->
Protocol::send_result_set_metadata().
sql/sql_update.cc:
Remove an extraneous my_error(). The error
is already reported in update_non_unique_table_error().
sql/sql_yacc.yy:
Support for multi-statements is an independent
property of parsing, not derived from
the protocol type.
tests/mysql_client_test.c:
Add tests for WL#4435 (binary protocol).
2630.39.1, 2630.28.29, 2630.34.3, 2630.34.2, 2630.34.1, 2630.29.29,
2630.29.28, 2630.31.1, 2630.28.13, 2630.28.10, 2617.23.14 and
some other minor revisions.
This patch implements:
WL#4264 "Backup: Stabilize Service Interface" -- all the
server prerequisites except si_objects.{h,cc} themselves (they can
be just copied over, when needed).
WL#4435: Support OUT-parameters in prepared statements.
(and all issues in the initial patches for these two
tasks, that were discovered in pushbuild and during testing).
Bug#39519: mysql_stmt_close() should flush all data
associated with the statement.
After execution of a prepared statement, send OUT parameters of the invoked
stored procedure, if any, to the client.
When using the binary protocol, send the parameters in an additional result
set over the wire. When using the text protocol, assign out parameters to
the user variables from the CALL(@var1, @var2, ...) specification.
The following refactoring has been made:
- Protocol::send_fields() was renamed to Protocol::send_result_set_metadata();
- A new Protocol::send_result_set_row() was introduced to incapsulate
common functionality for sending row data.
- Signature of Protocol::prepare_for_send() was changed: this operation
does not need a list of items, the number of items is fully sufficient.
The following backward incompatible changes have been made:
- CLIENT_MULTI_RESULTS is now enabled by default in the client;
- CLIENT_PS_MULTI_RESUTLS is now enabled by default in the client.
line 138 when forcing a spatial index
Problem: "Spatial indexes can be involved in the search
for queries that use a function such as MBRContains()
or MBRWithin() in the WHERE clause".
Using spatial indexes for JOINs with =, <=> etc.
predicates is incorrect.
Fix: disable spatial indexes for such queries.
mysql-test/r/select.result:
Fix for bug#47019: Assertion failed: 0, file .\rt_mbr.c,
line 138 when forcing a spatial index
- test result.
mysql-test/t/select.test:
Fix for bug#47019: Assertion failed: 0, file .\rt_mbr.c,
line 138 when forcing a spatial index
- test case.
sql/sql_select.cc:
Fix for bug#47019: Assertion failed: 0, file .\rt_mbr.c,
line 138 when forcing a spatial index
- disable spatial indexes for queries which use
non-spatial conditions (e.g. NATURAL JOINs).
line 138 when forcing a spatial index
Problem: "Spatial indexes can be involved in the search
for queries that use a function such as MBRContains()
or MBRWithin() in the WHERE clause".
Using spatial indexes for JOINs with =, <=> etc.
predicates is incorrect.
Fix: disable spatial indexes for such queries.
The original code comes, as far as I know, from Google (Mark Callaghan's team) with additional work from Percona, Ourdelta and Weldon Whipple.
This code provides the same functionallity, but with a lot of changes to make it faster and better fit the MariaDB infrastucture.
Added new status variables:
- Com_show_client_statistics, Com_show_index_statistics, Com_show_table_statistics, Com_show_user_statistics
- Access_denied_errors, Busy_time (clock time), Binlog_bytes_written, Cpu_time, Empty_queries, Rows_sent, Rows_read
Added new variable / startup option 'userstat' to control if user statistics should be enabled or not
Added my_getcputime(); Returns cpu time used by this thread.
New FLUSH commands:
- FLUSH SLOW QUERY LOG
- FLUSH TABLE_STATISTICS
- FLUSH INDEX_STATISTICS
- FLUSH USER_STATISTICS
- FLUSH CLIENT_STATISTICS
New SHOW commands:
- SHOW CLIENT_STATISTICS
- SHOW USER_STATISTICS
- SHOW TABLE_STATISTICS
- SHOW INDEX_STATISTICS
New Information schemas:
- CLIENT_STATISTICS
- USER_STATISTICS
- INDEX_STATISTICS
- TABLE_STATISTICS
Added support for all new flush commands to mysqladmin
Added handler::ha_... wrappers for all handler read calls to do statistics counting
- Changed all code to use new ha_... calls
- Count number of read rows, changed rows and rows read trough an index
Added counting of number of bytes sent to binary log (status variable Binlog_bytes_written)
Added counting of access denied errors (status variable Access_denied_erors)
Bugs fixed:
- Fixed bug in add_to_status() and add_diff_to_status() where longlong variables where threated as long
- CLOCK_GETTIME was not propely working on Linuxm
client/mysqladmin.cc:
Added support for all new flush commmands and some common combinations:
flush-slow-log
flush-table-statistics
flush-index-statistics
flush-user-statistics
flush-client-statistics
flush-all-status
flush-all-statistics
configure.in:
Added checking if clock_gettime needs the librt.
(Fixes Bug #37639 clock_gettime is never used/enabled in Linux/Unix)
include/my_sys.h:
Added my_getcputime()
include/mysql_com.h:
Added LIST_PROCESS_HOST_LEN & new REFRESH target defines
mysql-test/r/information_schema.result:
New information schema tables added
mysql-test/r/information_schema_all_engines.result:
New information schema tables added
mysql-test/r/information_schema_db.result:
New information schema tables added
mysql-test/r/log_slow.result:
Added testing that flosh slow query logs is accepted
mysql-test/r/status_user.result:
Basic testing of user, client, table and index statistics
mysql-test/t/log_slow.test:
Added testing that flosh slow query logs is accepted
mysql-test/t/status_user-master.opt:
Ensure that we get a fresh restart before running status_user.test
mysql-test/t/status_user.test:
Basic testing of user, client, table and index statistics
mysys/my_getsystime.c:
Added my_getcputime()
Returns cpu time used by this thread.
sql/authors.h:
Updated authors to have core and original MySQL developers first.
sql/event_data_objects.cc:
Updated call to mysql_reset_thd_for_next_command()
sql/event_db_repository.cc:
Changed to use new ha_... calls
sql/filesort.cc:
Changed to use new ha_... calls
sql/ha_partition.cc:
Changed to use new ha_... calls
Fixed comment syntax
sql/handler.cc:
Changed to use new ha_... calls
Reset table statistics
Added code to update global table and index status
Added counting of rows changed
sql/handler.h:
Added table and index statistics variables
Added function reset_statistics()
Added handler::ha_... wrappers for all handler read calls to do statistics counting
Protected all normal read calls to ensure we use the new calls in the server.
Made ha_partition a friend class so that partition code can call the old read functions
sql/item_subselect.cc:
Changed to use new ha_... calls
sql/lex.h:
Added keywords for new information schema tables and flush commands
sql/log.cc:
Added flush_slow_log()
Added counting of number of bytes sent to binary log
Removed not needed test of thd (It's used before, so it's safe to use)
Added THD object to MYSQL_BIN_LOG::write_cache() to simplify statistics counting
sql/log.h:
Added new parameter to write_cache()
Added flush_slow_log() functions.
sql/log_event.cc:
Updated call to mysql_reset_thd_for_next_command()
Changed to use new ha_... calls
sql/log_event_old.cc:
Updated call to mysql_reset_thd_for_next_command()
Changed to use new ha_... calls
sql/mysql_priv.h:
Updated call to mysql_reset_thd_for_next_command()
Added new statistics functions and variables needed by these.
sql/mysqld.cc:
Added new statistics variables and structures to handle these
Added new status variables:
- Com_show_client_statistics, Com_show_index_statistics, Com_show_table_statistics, Com_show_user_statistics
- Access_denied_errors, Busy_time (clock time), Binlog_bytes_written, Cpu_time, Empty_queries, Rows_set, Rows_read
Added new option 'userstat' to control if user statistics should be enabled or not
sql/opt_range.cc:
Changed to use new ha_... calls
sql/opt_range.h:
Changed to use new ha_... calls
sql/opt_sum.cc:
Changed to use new ha_... calls
sql/records.cc:
Changed to use new ha_... calls
sql/set_var.cc:
Added variable 'userstat'
sql/sp.cc:
Changed to use new ha_... calls
sql/sql_acl.cc:
Changed to use new ha_... calls
Added counting of access_denied_errors
sql/sql_base.cc:
Added call to statistics functions
sql/sql_class.cc:
Added usage of org_status_var, to store status variables at start of command
Added functions THD::update_stats(), THD::update_all_stats()
Fixed bug in add_to_status() and add_diff_to_status() where longlong variables where threated as long
sql/sql_class.h:
Added new status variables to status_var
Moved variables that was not ulong in status_var last.
Added variables to THD for storing temporary values during statistics counting
sql/sql_connect.cc:
Variables and functions to calculate user and client statistics
Added counting of access_denied_errors and lost_connections
sql/sql_cursor.cc:
Changed to use new ha_... calls
sql/sql_handler.cc:
Changed to use new ha_... calls
sql/sql_help.cc:
Changed to use new ha_... calls
sql/sql_insert.cc:
Changed to use new ha_... calls
sql/sql_lex.h:
Added SQLCOM_SHOW_USER_STATS, SQLCOM_SHOW_TABLE_STATS, SQLCOM_SHOW_INDEX_STATS, SQLCOM_SHOW_CLIENT_STATS
sql/sql_parse.cc:
Added handling of:
- SHOW CLIENT_STATISTICS
- SHOW USER_STATISTICS
- SHOW TABLE_STATISTICS
- SHOW INDEX_STATISTICS
Added handling of new FLUSH commands:
- FLUSH SLOW QUERY LOGS
- FLUSH TABLE_STATISTICS
- FLUSH INDEX_STATISTICS
- FLUSH USER_STATISTICS
- FLUSH CLIENT_STATISTICS
Added THD parameter to mysql_reset_thd_for_next_command()
Added initialization and calls to user statistics functions
Added increment of statistics variables empty_queries, rows_sent and access_denied_errors.
Added counting of cpu time per query
sql/sql_plugin.cc:
Changed to use new ha_... calls
sql/sql_prepare.cc:
Updated call to mysql_reset_thd_for_next_command()
sql/sql_select.cc:
Changed to use new ha_... calls
Indentation changes
sql/sql_servers.cc:
Changed to use new ha_... calls
sql/sql_show.cc:
Added counting of access denied errors
Added function for new information schema tables:
- CLIENT_STATISTICS
- USER_STATISTICS
- INDEX_STATISTICS
- TABLE_STATISTICS
Changed to use new ha_... calls
sql/sql_table.cc:
Changed to use new ha_... calls
sql/sql_udf.cc:
Changed to use new ha_... calls
sql/sql_update.cc:
Changed to use new ha_... calls
sql/sql_yacc.yy:
Add new show and flush commands
sql/structs.h:
Add name_length to KEY to avoid some strlen
Added cache_name to KEY for fast storage of keyvalue in cache
Added structs USER_STATS, TABLE_STATS, INDEX_STATS
Added function prototypes for statistics functions
sql/table.cc:
Store db+table+index name into keyinfo->cache_name
sql/table.h:
Added new information schema tables
sql/tztime.cc:
Changed to use new ha_... calls
BUG#38049 "incorrect rows estimations with references from preceding table"
(from revid:sergefp@mysql.com-20090126194259-ue20il3qro529l4d).
Compared to 6.0 where EXPLAIN indicates "Using index condition", here in join_optimizer.result
we see "Using where"; it's normal; 6.0 shows the same if disabling Index Condition Pushdown.
BUG#38049 "incorrect rows estimations with references from preceding table"
(from revid:sergefp@mysql.com-20090126194259-ue20il3qro529l4d).
Compared to 6.0 where EXPLAIN indicates "Using index condition", here in join_optimizer.result
we see "Using where"; it's normal; 6.0 shows the same if disabling Index Condition Pushdown.
EXPLAIN EXTENDED warning.
Query optimizer searches for the constant tables and optimizes them away. This
means that fields of such tables are substituted for their values and on later
phases they are treated as constants. After this constant tables are removed
from the query execution plan. Nevertheless constant tables were shown in
the EXPLAIN EXTENDED warning thus producing query that might be not an
equivalent of the original query.
Now the print_join function skips all tables that were optimized away from
printing to the EXPLAIN EXTENDED warning. If all tables were optimized away it
produces the 'FROM dual' clause.
mysql-test/r/explain.result:
A test case added for the bug#30302.
mysql-test/r/func_default.result:
Adjusted test case result after fix for the bug#30302.
mysql-test/r/func_regexp.result:
Adjusted test case result after fix for the bug#30302.
mysql-test/r/func_test.result:
Adjusted test case result after fix for the bug#30302.
mysql-test/r/having.result:
Adjusted test case result after fix for the bug#30302.
mysql-test/r/select.result:
Adjusted test case result after fix for the bug#30302.
mysql-test/r/subselect.result:
Adjusted test case result after fix for the bug#30302.
mysql-test/r/subselect3.result:
Adjusted test case result after fix for the bug#30302.
mysql-test/r/type_datetime.result:
Adjusted test case result after fix for the bug#30302.
mysql-test/t/explain.test:
A test case added for the bug#30302.
sql/sql_select.cc:
Bug#30302: Tables that were optimized away are printed in the
EXPLAIN EXTENDED warning.
Now the print_join function skips all tables that were optimized away from
printing to the EXPLAIN EXTENDED warning. If all tables were optimized away it
produces the 'FROM dual' clause.
sql/table.h:
Adjusted test case result after fix for the bug#30302.
The optimized_away flag is added to the TABLE_LIST struct.
EXPLAIN EXTENDED warning.
Query optimizer searches for the constant tables and optimizes them away. This
means that fields of such tables are substituted for their values and on later
phases they are treated as constants. After this constant tables are removed
from the query execution plan. Nevertheless constant tables were shown in
the EXPLAIN EXTENDED warning thus producing query that might be not an
equivalent of the original query.
Now the print_join function skips all tables that were optimized away from
printing to the EXPLAIN EXTENDED warning. If all tables were optimized away it
produces the 'FROM dual' clause.
----------------------------------------------------------
revno: 2630.22.11
committer: Konstantin Osipov <konstantin@mysql.com>
branch nick: mysql-6.0-records
timestamp: Mon 2008-08-11 16:40:09 +0400
message:
Move read_record related functions to a new header - records.h
sql/Makefile.am:
Introduce records.h
sql/handler.h:
Forward-declare class handler (an unnecessary forward declaration
was removed from mysql_priv.h).
sql/item_subselect.cc:
Make read_record function naming more consistent.
Assign read_record function at once, no need to defer till
read_first_record invocation.
sql/mysql_priv.h:
Include records.h, previously part of structs.h
sql/records.cc:
Use records.h
sql/sql_select.h:
Update to use new declarations.
sql/structs.h:
Move declarations of READ_RECORD and related functions to records.h
----------------------------------------------------------
revno: 2630.13.6
committer: Konstantin Osipov <konstantin@mysql.com>
branch nick: mysql-6.0-3288
timestamp: Fri 2008-07-11 20:22:44 +0400
message:
WL#3288, step 1: ensure that the SQL layer always closes an open
cursor (rnd or index read) before closing a handler.
sql/handler.h:
Assert that the read is closed in handler destructor.
sql/sql_select.cc:
Remove JOIN::table which was a piece of redundancy. The problem was
that JOIN::cleanup() works only if JOIN::table is not null,
but JOIN::cleanup also assigns JOIN::table to NULL. This assignment
is apparently there for safety, from the times when we had no support for correlated
subqueries. Indeed, in case of a evaluation of a correlated subquery more than once it led
to JOIN::cleanup doing nothing, and leaving the rnd or index read open.
In do_select(), make sure we call JOIN::join_free() even in case of an
error.
sql/sql_select.h:
Remove JOIN::table, JOIN::all_tables has the same functionality.
----------------------------------------------------------
revno: 2630.13.6
committer: Konstantin Osipov <konstantin@mysql.com>
branch nick: mysql-6.0-3288
timestamp: Fri 2008-07-11 20:22:44 +0400
message:
WL#3288, step 1: ensure that the SQL layer always closes an open
cursor (rnd or index read) before closing a handler.
