update statements
Only SELECT statements report any examined rows in the slow
log. Slow UPDATE, DELETE and INSERT statements report 0 rows
examined, unless the statement has a condition including a
SELECT substatement.
This patch adds counting of examined rows for the UPDATE and
DELETE statements. An INSERT ... VALUES statement will still
not report any rows as examined.
Bug#20837 Apparent change of isolation level during transaction,
Bug#46527 COMMIT AND CHAIN RELEASE does not make sense,
Bug#53343 completion_type=1, COMMIT/ROLLBACK AND CHAIN don't
preserve the isolation level
Bug#53346 completion_type has strange effect in a stored
procedure/prepared statement
Make thd->tx_isolation mean strictly "current transaction
isolation level"
Make thd->variables.tx_isolation mean "current session isolation
level".
The current transaction isolation level is now established
at transaction start. If there was a SET TRANSACTION
ISOLATION LEVEL statement, the value is taken from it.
Otherwise, the session value is used.
A change in a session value, made while a transaction is active,
whereas still allowed, no longer has any effect on the
current transaction isolation level. This is an incompatible
change.
A change in a session isolation level, made while there is
no active transaction, overrides SET TRANSACTION statement,
if there was any.
Changed the impelmentation to not look at @@session.completion_type
in the parser, and thus fixed Bug#53346.
Changed the parser to not allow AND NO CHAIN RELEASE,
and thus fixed Bug#46527.
Changed the transaction API to take the current transaction
isolation level into account:
- BEGIN/COMMIT now do preserve the current transaction
isolation level if chaining is on.
- implicit commit, XA COMMIT or XA ROLLBACK or autocommit don't.
Bug#20837 Apparent change of isolation level during transaction,
Bug#46527 COMMIT AND CHAIN RELEASE does not make sense,
Bug#53343 completion_type=1, COMMIT/ROLLBACK AND CHAIN don't
preserve the isolation level
Bug#53346 completion_type has strange effect in a stored
procedure/prepared statement
Make thd->tx_isolation mean strictly "current transaction
isolation level"
Make thd->variables.tx_isolation mean "current session isolation
level".
The current transaction isolation level is now established
at transaction start. If there was a SET TRANSACTION
ISOLATION LEVEL statement, the value is taken from it.
Otherwise, the session value is used.
A change in a session value, made while a transaction is active,
whereas still allowed, no longer has any effect on the
current transaction isolation level. This is an incompatible
change.
A change in a session isolation level, made while there is
no active transaction, overrides SET TRANSACTION statement,
if there was any.
Changed the impelmentation to not look at @@session.completion_type
in the parser, and thus fixed Bug#53346.
Changed the parser to not allow AND NO CHAIN RELEASE,
and thus fixed Bug#46527.
Changed the transaction API to take the current transaction
isolation level into account:
- BEGIN/COMMIT now do preserve the current transaction
isolation level if chaining is on.
- implicit commit, XA COMMIT or XA ROLLBACK or autocommit don't.
Conflicts:
Text conflict in configure.in
Text conflict in dbug/dbug.c
Text conflict in mysql-test/r/ps.result
Text conflict in mysql-test/t/ps.test
Text conflict in sql/CMakeLists.txt
Text conflict in sql/ha_ndbcluster.cc
Text conflict in sql/mysqld.cc
Text conflict in sql/sql_plugin.cc
Text conflict in sql/sql_table.cc
Conflicts:
Text conflict in configure.in
Text conflict in dbug/dbug.c
Text conflict in mysql-test/r/ps.result
Text conflict in mysql-test/t/ps.test
Text conflict in sql/CMakeLists.txt
Text conflict in sql/ha_ndbcluster.cc
Text conflict in sql/mysqld.cc
Text conflict in sql/sql_plugin.cc
Text conflict in sql/sql_table.cc
Statements with CONNECTION_ID were forced to be kept in the transactional
cache and by consequence non-transactional changes that were supposed to
be flushed ahead of the transaction were kept in the transactional cache.
This happened because after BUG#51894 any statement whose thd's
thread_specific_used was set was kept in the transactional cache. The idea
was to keep changes on temporary tables in the transactional cache. However,
the thread_specific_used was set not only for statements that accessed
temporary tables but also when the CONNECTION_ID was used.
To fix the problem, we created a new variable to keep track of updates
to temporary tables.
mysql-test/suite/rpl/r/rpl_temp_temporary.result:
Added a test case.
mysql-test/suite/rpl/t/rpl_temp_temporary.test:
Added a test case.
sql/log_event.cc:
Uses the thread_temporary_used to decide if a statement should
be kept in the transactional cache or not.
sql/sql_class.cc:
Sets the thread_temporary_used while calling the decide_logging_format.
sql/sql_class.h:
Defines the thread_temporary_used.
sql/sql_parse.cc:
Resets the thread_temporary_used.
Statements with CONNECTION_ID were forced to be kept in the transactional
cache and by consequence non-transactional changes that were supposed to
be flushed ahead of the transaction were kept in the transactional cache.
This happened because after BUG#51894 any statement whose thd's
thread_specific_used was set was kept in the transactional cache. The idea
was to keep changes on temporary tables in the transactional cache. However,
the thread_specific_used was set not only for statements that accessed
temporary tables but also when the CONNECTION_ID was used.
To fix the problem, we created a new variable to keep track of updates
to temporary tables.
transaction
BUG#52616 Temp table prevents switch binlog format from STATEMENT to ROW
Before the WL#2687 and BUG#46364, every non-transactional change that happened
after a transactional change was written to trx-cache and flushed upon
committing the transaction. WL#2687 and BUG#46364 changed this behavior and
non-transactional changes are now written to the binary log upon committing
the statement.
A binary log event is identified as transactional or non-transactional through
a flag in the Log_event which is set taking into account the underlie storage
engine on what it is stems from. In the current bug, this flag was not being
set properly when the DROP TEMPORARY TABLE was executed.
However, while fixing this bug we figured out that changes to temporary tables
should be always written to the trx-cache if there is an on-going transaction.
Otherwise, binlog events in the reversed order would be produced.
Regarding concurrency, keeping changes to temporary tables in the trx-cache is
also safe as temporary tables are only visible to the owner connection.
In this patch, we classify the following statements as unsafe:
1 - INSERT INTO t_myisam SELECT * FROM t_myisam_temp
2 - INSERT INTO t_myisam_temp SELECT * FROM t_myisam
3 - CREATE TEMPORARY TABLE t_myisam_temp SELECT * FROM t_myisam
On the other hand, the following statements are classified as safe:
1 - INSERT INTO t_innodb SELECT * FROM t_myisam_temp
2 - INSERT INTO t_myisam_temp SELECT * FROM t_innodb
The patch also guarantees that transactions that have a DROP TEMPORARY are
always written to the binary log regardless of the mode and the outcome:
commit or rollback. In particular, the DROP TEMPORARY is extended with the
IF EXISTS clause when the current statement logging format is set to row.
Finally, the patch allows to switch from STATEMENT to MIXED/ROW when there
are temporary tables but the contrary is not possible.
mysql-test/extra/rpl_tests/rpl_binlog_max_cache_size.test:
Updated the test case because
CREATE TEMPORARY TABLE t_innodb_temp SELECT * FROM t_myisam is not unsafe.
mysql-test/extra/rpl_tests/rpl_implicit_commit_binlog.test:
Updated the test case due to the new rules: changes to
temporary tables are written to the binary log in the
boundaries of a transaction if there is any.
mysql-test/extra/rpl_tests/rpl_innodb.test:
Removed comments from the test case that became false after the patch.
mysql-test/extra/rpl_tests/rpl_loaddata.test:
Suppressed warning messages due to the following cases:
1 - INSERT INTO t_myisam SELECT * FROM t_myisam_temp
2 - INSERT INTO t_myisam_temp SELECT * FROM t_myisam
mysql-test/include/ctype_utf8_table.inc:
Suppressed warning messages due to the following cases:
1 - INSERT INTO t_myisam SELECT * FROM t_myisam_temp
2 - INSERT INTO t_myisam_temp SELECT * FROM t_myisam
mysql-test/r/ctype_cp932_binlog_stm.result:
Updated the test case due to the new rules: changes to
temporary tables are written to the binary log in the
boundaries of a transaction if there is any.
mysql-test/suite/binlog/r/binlog_database.result:
Updated the test case due to the new rules: changes to
temporary tables are written to the binary log in the
boundaries of a transaction if there is any.
mysql-test/suite/binlog/r/binlog_innodb_row.result:
Updated the result file.
mysql-test/suite/binlog/r/binlog_multi_engine.result:
Updated the unsafe message.
mysql-test/suite/binlog/r/binlog_row_binlog.result:
Updated the test case due to the new rules: changes to
temporary tables are written to the binary log in the
boundaries of a transaction if there is any.
mysql-test/suite/binlog/r/binlog_row_drop_tmp_tbl.result:
Updated the test case due to the new rules: changes to
temporary tables are written to the binary log in the
boundaries of a transaction if there is any.
mysql-test/suite/binlog/r/binlog_row_mix_innodb_myisam.result:
Updated the test case due to the new rules: changes to
temporary tables are written to the binary log in the
boundaries of a transaction if there is any.
mysql-test/suite/binlog/r/binlog_stm_binlog.result:
Updated the result file.
mysql-test/suite/binlog/r/binlog_stm_mix_innodb_myisam.result:
Updated the test case due to the new rules: changes to
temporary tables are written to the binary log in the
boundaries of a transaction if there is any.
mysql-test/suite/binlog/t/binlog_tmp_table.test:
Suppressed warning messages due to the following cases:
1 - INSERT INTO t_myisam SELECT * FROM t_myisam_temp
2 - INSERT INTO t_myisam_temp SELECT * FROM t_myisam
mysql-test/suite/ndb/r/ndb_binlog_format.result:
Updated the unsafe message.
mysql-test/suite/rpl/r/rpl_concurrency_error.result:
Updated the unsafe message.
mysql-test/suite/rpl/r/rpl_mixed_binlog_max_cache_size.result:
Updated the result file because
CREATE TEMPORARY TABLE t_innodb_temp SELECT * FROM t_myisam is not unsafe.
mysql-test/suite/rpl/r/rpl_mixed_implicit_commit_binlog.result:
Updated the test case due to the new rules: changes to
temporary tables are written to the binary log in the
boundaries of a transaction if there is any.
mysql-test/suite/rpl/r/rpl_mixed_mixing_engines.result:
Updated the test case due to the new rules: changes to
temporary tables are written to the binary log in the
boundaries of a transaction if there is any.
mysql-test/suite/rpl/r/rpl_mixed_row_innodb.result:
Added some comments to ease the understanding of the result file.
mysql-test/suite/rpl/r/rpl_non_direct_mixed_mixing_engines.result:
Updated the test case due to the new rules: changes to
temporary tables are written to the binary log in the
boundaries of a transaction if there is any.
mysql-test/suite/rpl/r/rpl_non_direct_row_mixing_engines.result:
Updated the test case due to the new rules: changes to
temporary tables are written to the binary log in the
boundaries of a transaction if there is any.
mysql-test/suite/rpl/r/rpl_non_direct_stm_mixing_engines.result:
Updated the test case due to the new rules: changes to
temporary tables are written to the binary log in the
boundaries of a transaction if there is any.
mysql-test/suite/rpl/r/rpl_row_drop.result:
Updated the test case due to the new rules: changes to
temporary tables are written to the binary log in the
boundaries of a transaction if there is any.
mysql-test/suite/rpl/r/rpl_row_implicit_commit_binlog.result:
Updated the test case due to the new rules: changes to
temporary tables are written to the binary log in the
boundaries of a transaction if there is any.
mysql-test/suite/rpl/r/rpl_row_mixing_engines.result:
Updated the test case due to the new rules: changes to
temporary tables are written to the binary log in the
boundaries of a transaction if there is any.
mysql-test/suite/rpl/r/rpl_stm_binlog_max_cache_size.result:
Updated the result file because
CREATE TEMPORARY TABLE t_innodb_temp SELECT * FROM t_myisam is not unsafe.
mysql-test/suite/rpl/r/rpl_stm_implicit_commit_binlog.result:
Updated the test case due to the new rules: changes to
temporary tables are written to the binary log in the
boundaries of a transaction if there is any.
mysql-test/suite/rpl/r/rpl_stm_innodb.result:
Added some comments to ease the understanding of the result file.
mysql-test/suite/rpl/r/rpl_stm_mixing_engines.result:
Updated the test case due to the new rules: changes to
temporary tables are written to the binary log in the
boundaries of a transaction if there is any.
mysql-test/suite/rpl/r/rpl_stm_stop_middle_group.result:
Updated the unsafe message.
mysql-test/suite/rpl/r/rpl_temp_temporary.result:
Added a test case.
mysql-test/suite/rpl/t/rpl000013.test:
Suppressed warning messages due to the following cases:
1 - INSERT INTO t_myisam SELECT * FROM t_myisam_temp
2 - INSERT INTO t_myisam_temp SELECT * FROM t_myisam
3 - CREATE TEMPORARY TABLE t_myisam_temp SELECT * FROM t_myisam
mysql-test/suite/rpl/t/rpl_misc_functions.test:
Suppressed warning messages.
mysql-test/suite/rpl/t/rpl_temp_table.test:
Suppressed warning messages due to the following cases:
1 - INSERT INTO t_myisam SELECT * FROM t_myisam_temp
2 - INSERT INTO t_myisam_temp SELECT * FROM t_myisam
3 - CREATE TEMPORARY TABLE t_myisam_temp SELECT * FROM t_myisam
mysql-test/suite/rpl/t/rpl_temp_temporary.test:
Added a test case.
mysql-test/suite/rpl/t/rpl_temporary.test:
Suppressed warning messages due to the following cases:
1 - INSERT INTO t_myisam SELECT * FROM t_myisam_temp
2 - INSERT INTO t_myisam_temp SELECT * FROM t_myisam
3 - CREATE TEMPORARY TABLE t_myisam_temp SELECT * FROM t_myisam
mysql-test/suite/rpl_ndb/r/rpl_ndb_row_implicit_commit_binlog.result:
Updated the test case due to the new rules: changes to
temporary tables are written to the binary log in the
boundaries of a transaction if there is any.
mysql-test/suite/rpl_ndb/r/rpl_truncate_7ndb.result:
Updated the test case to remove references to positions
in the binary log.
mysql-test/suite/rpl_ndb/t/rpl_truncate_7ndb.test:
Updated the test case to remove references to positions
in the binary log.
mysql-test/t/create_select_tmp.test:
Suppressed warning messages due to the following cases:
1 - INSERT INTO t_myisam SELECT * FROM t_myisam_temp
2 - INSERT INTO t_myisam_temp SELECT * FROM t_myisam
3 - CREATE TEMPORARY TABLE t_myisam_temp SELECT * FROM t_myisam
mysql-test/t/ctype_cp932_binlog_stm.test:
Suppressed warning messages due to the following cases:
1 - INSERT INTO t_myisam SELECT * FROM t_myisam_temp
2 - INSERT INTO t_myisam_temp SELECT * FROM t_myisam
3 - CREATE TEMPORARY TABLE t_myisam_temp SELECT * FROM t_myisam
mysql-test/t/mysqlbinlog.test:
Suppressed warning messages due to the following cases:
1 - INSERT INTO t_myisam SELECT * FROM t_myisam_temp
2 - INSERT INTO t_myisam_temp SELECT * FROM t_myisam
3 - CREATE TEMPORARY TABLE t_myisam_temp SELECT * FROM t_myisam
sql/log.cc:
Improved the code by creating several functions to hide decision
on type of engine changed, commit/abort, etc:
. stmt_has_updated_non_trans_table
. trans_has_updated_non_trans_table
. ending_trans
Updated the binlog_rollback function and the use of the
OPTION_KEEP_LOG which indincates when a temporary table was
either created or dropped and as such the command must be
logged if not in MIXED mode and even while rolling back the
transaction.
sql/log.h:
Improved the code by creating several functions to hide decision
on type of engine changed, commit/abort, etc.
sql/log_event.cc:
Removed the setting of the OPTION_KEEP_LOG as it is related to CREATE
TEMPORARY and DROP TEMPORARY and not to the type of engine (i.e.
transactional or non-transactional).
sql/log_event_old.cc:
Removed the setting of the OPTION_KEEP_LOG as it is related to CREATE
TEMPORARY and DROP TEMPORARY and not to the type of engine (i.e.
transactional or non-transactional).
sql/share/errmsg-utf8.txt:
Updated the unsafe message.
sql/sql_class.cc:
Classifies the following statements as unsafe:
1 - INSERT INTO t_myisam SELECT * FROM t_myisam_temp
2 - INSERT INTO t_myisam_temp SELECT * FROM t_myisam
On the other hand, the following statements are classified as safe:
1 - INSERT INTO t_innodb SELECT * FROM t_myisam_temp
2 - INSERT INTO t_myisam_temp SELECT * FROM t_innodb
sql/sql_class.h:
It allows to switch from STATEMENT to MIXED/ROW when there are temporary
tables but the contrary is not possible.
sql/sql_table.cc:
Fixed the case that a DROP/DROP TEMPORARY that affects a temporary table in MIXED
mode is written as a DROP TEMPORARY TABLE IF EXISTS because the table may not exist in the slave and due to the IF EXISTS token an error will never happen
while processing the statement in the slave.
Removed a function that was not being used.
transaction
BUG#52616 Temp table prevents switch binlog format from STATEMENT to ROW
Before the WL#2687 and BUG#46364, every non-transactional change that happened
after a transactional change was written to trx-cache and flushed upon
committing the transaction. WL#2687 and BUG#46364 changed this behavior and
non-transactional changes are now written to the binary log upon committing
the statement.
A binary log event is identified as transactional or non-transactional through
a flag in the Log_event which is set taking into account the underlie storage
engine on what it is stems from. In the current bug, this flag was not being
set properly when the DROP TEMPORARY TABLE was executed.
However, while fixing this bug we figured out that changes to temporary tables
should be always written to the trx-cache if there is an on-going transaction.
Otherwise, binlog events in the reversed order would be produced.
Regarding concurrency, keeping changes to temporary tables in the trx-cache is
also safe as temporary tables are only visible to the owner connection.
In this patch, we classify the following statements as unsafe:
1 - INSERT INTO t_myisam SELECT * FROM t_myisam_temp
2 - INSERT INTO t_myisam_temp SELECT * FROM t_myisam
3 - CREATE TEMPORARY TABLE t_myisam_temp SELECT * FROM t_myisam
On the other hand, the following statements are classified as safe:
1 - INSERT INTO t_innodb SELECT * FROM t_myisam_temp
2 - INSERT INTO t_myisam_temp SELECT * FROM t_innodb
The patch also guarantees that transactions that have a DROP TEMPORARY are
always written to the binary log regardless of the mode and the outcome:
commit or rollback. In particular, the DROP TEMPORARY is extended with the
IF EXISTS clause when the current statement logging format is set to row.
Finally, the patch allows to switch from STATEMENT to MIXED/ROW when there
are temporary tables but the contrary is not possible.
to cleanup open connections
It was possible to UNINSTALL storage engine plugin when binding
between THD object and storage engine is still active (e.g. in
the middle of transaction).
To avoid unclean deactivation (uninstall) of storage engine plugin
in the middle of transaction, additional storage engine plugin
lock is acquired by thd_set_ha_data().
If ha_data is not null and storage engine plugin was not locked
by thd_set_ha_data() in this connection before, storage engine
plugin gets locked.
If ha_data is null and storage engine plugin was locked by
thd_set_ha_data() in this connection before, storage engine
plugin lock gets released.
If handlerton::close_connection() didn't reset ha_data, server does
it immediately after calling handlerton::close_connection().
Note that this is just a framework fix, storage engines must switch
to thd_set_ha_data() from thd_ha_data() if they want to see fit.
include/mysql/plugin.h:
As thd_{get|set}_ha_data() have some extra logic now, they
must be implemented on server side.
include/mysql/plugin.h.pp:
As thd_{get|set}_ha_data() have some extra logic now, they
must be implemented on server side.
sql/handler.cc:
Make sure ha_data is reset and ha_data lock is released.
sql/handler.h:
hton is not supposed to be updated by ha_lock_engine(),
make it const.
sql/sql_class.cc:
As thd_{get|set}_ha_data() have some extra logic now, they
must be implemented on server side.
sql/sql_class.h:
Added ha_data lock.
to cleanup open connections
It was possible to UNINSTALL storage engine plugin when binding
between THD object and storage engine is still active (e.g. in
the middle of transaction).
To avoid unclean deactivation (uninstall) of storage engine plugin
in the middle of transaction, additional storage engine plugin
lock is acquired by thd_set_ha_data().
If ha_data is not null and storage engine plugin was not locked
by thd_set_ha_data() in this connection before, storage engine
plugin gets locked.
If ha_data is null and storage engine plugin was locked by
thd_set_ha_data() in this connection before, storage engine
plugin lock gets released.
If handlerton::close_connection() didn't reset ha_data, server does
it immediately after calling handlerton::close_connection().
Note that this is just a framework fix, storage engines must switch
to thd_set_ha_data() from thd_ha_data() if they want to see fit.
Docs/sp-imp-spec.txt:
New sql_mode added.
include/my_base.h:
Flag in frm of create options.
libmysqld/CMakeLists.txt:
New files added.
libmysqld/Makefile.am:
New files added.
mysql-test/r/events_bugs.result:
New sql_mode added.
mysql-test/r/information_schema.result:
New sql_mode added.
mysql-test/r/sp.result:
New sql_mode added.
mysql-test/r/system_mysql_db.result:
New sql_mode added.
mysql-test/suite/funcs_1/r/is_columns_mysql.result:
New sql_mode added.
mysql-test/suite/funcs_1/r/is_columns_mysql_embedded.result:
New sql_mode added.
mysql-test/t/events_bugs.test:
New sql_mode added.
mysql-test/t/sp.test:
New sql_mode added.
scripts/mysql_system_tables.sql:
New sql_mode added.
scripts/mysql_system_tables_fix.sql:
New sql_mode added.
sql/CMakeLists.txt:
New files added.
sql/Makefile.am:
New files added.
sql/event_db_repository.cc:
New sql_mode added.
sql/field.cc:
Create options support added.
sql/field.h:
Create options support added.
sql/ha_partition.cc:
Create options support added.
sql/handler.cc:
Create options support added.
sql/handler.h:
Create options support added.
sql/log_event.h:
New sql_mode added.
sql/mysql_priv.h:
New sql_mode added.
sql/mysqld.cc:
New sql_mode added.
sql/share/errmsg.txt:
New error messages added.
sql/sp.cc:
New sql_mode added.
sql/sp_head.cc:
Create options support added.
sql/sql_class.cc:
Create options support added.
Debug added.
sql/sql_class.h:
Create options support added.
sql/sql_insert.cc:
my_safe_a* moved to mysqld_priv.h
sql/sql_lex.h:
Create options support added.
sql/sql_parse.cc:
Create options support added.
sql/sql_show.cc:
Create options support added.
sql/sql_table.cc:
Create options support added.
sql/sql_view.cc:
New sql_mode added.
sql/sql_yacc.yy:
Create options support added.
sql/structs.h:
Create options support added.
sql/table.cc:
Create options support added.
sql/table.h:
Create options support added.
sql/unireg.cc:
Create options support added.
storage/example/ha_example.cc:
Create options example.
storage/example/ha_example.h:
Create options example.
storage/pbxt/src/discover_xt.cc:
Create options support added.
Adding my_global.h first in all files using
NO_EMBEDDED_ACCESS_CHECKS.
Correcting a merge problem resulting from a changed definition
of check_some_access compared to the original patches.
Adding my_global.h first in all files using
NO_EMBEDDED_ACCESS_CHECKS.
Correcting a merge problem resulting from a changed definition
of check_some_access compared to the original patches.
Conflicts:
Text conflict in mysql-test/suite/binlog/r/binlog_row_mix_innodb_myisam.result
Text conflict in sql/log.cc
Text conflict in sql/set_var.cc
Text conflict in sql/sql_class.cc
Conflicts:
Text conflict in mysql-test/suite/binlog/r/binlog_row_mix_innodb_myisam.result
Text conflict in sql/log.cc
Text conflict in sql/set_var.cc
Text conflict in sql/sql_class.cc
Fixed valgrind warnings found from running main.connect under valgrind
sql/sp_head.cc:
Ensure that vcol_info is reset
sql/sql_acl.cc:
Fixed usage of wrong memroot for password
sql/sql_yacc.yy:
Ensure that vcol_info is reset
This patch:
- Moves all definitions from the mysql_priv.h file into
header files for the component where the variable is
defined
- Creates header files if the component lacks one
- Eliminates all include directives from mysql_priv.h
- Eliminates all circular include cycles
- Rename time.cc to sql_time.cc
- Rename mysql_priv.h to sql_priv.h
This patch:
- Moves all definitions from the mysql_priv.h file into
header files for the component where the variable is
defined
- Creates header files if the component lacks one
- Eliminates all include directives from mysql_priv.h
- Eliminates all circular include cycles
- Rename time.cc to sql_time.cc
- Rename mysql_priv.h to sql_priv.h
Disable pbxt for test cases not using pbxt (speeds up test suite)
extra/comp_err.c:
Added cast to get rid of compiler warning
extra/libevent/kqueue.c:
Added cast to get rid of compiler warning
mysql-test/lib/mtr_cases.pm:
Use --skip-pbxt for test cases that doesn't need pbxt
Collect default-storage-engine from suite.opt file (should actually be my.cnf file, but that wasn't easy to do)
mysql-test/suite/pbxt/t/suite.opt:
Added marker for mysql-test-run.pl that this suite require pbxt
mysys/mf_keycache.c:
Use LINT_INIT() to remove compiler warnings
mysys/my_gethostbyname.c:
Remove compiler warnings
sql/handler.cc:
Reset variable that may be used uninitialized
sql/item.h:
Remove compiler warning
sql/mysqld.cc:
Use LINT_INIT() to remove compiler warnings
sql/sql_class.h:
Remove compiler warning
sql/sql_table.cc:
Ensure variable is always set (to remove compiler warning)
sql/sql_view.cc:
Use LINT_INIT() to remove compiler warnings
storage/maria/ma_loghandler.c:
Use LINT_INIT() to remove compiler warnings
storage/myisammrg/ha_myisammrg.cc:
Fixed wrong type to printf
storage/myisammrg/myrg_open.c:
Use LINT_INIT() to remove compiler warnings
storage/xtradb/include/ut0lst.h:
Trivial change of macro to remove compiler warning
strings/ctype-ucs2.c:
Use LINT_INIT() to remove compiler warnings
strings/ctype-utf8.c:
Use LINT_INIT() to remove compiler warnings
support-files/compiler_warnings.supp:
Suppress some not relevant warnings
unittest/mysys/waiting_threads-t.c:
Don't use ftruncate() as this gives warning about ignored return value
Makefile.am:
add new API files to the check_abi rule,
remove duplicates
client/CMakeLists.txt:
now a client can use dlopen too
client/Makefile.am:
be csh-friendly
include/my_global.h:
add dummy plugs for dlopen and co.
for the code that needs them to work in static builds
mysys/Makefile.am:
be csh-friendly
plugin/auth/dialog.c:
typo fixed
CHECK_FIELD_IGNORE was treated as CHECK_FIELD_ERROR_FOR_NULL;
UPDATE...SET...NULL on NOT NULL fields behaved differently after
a trigger.
Now distinguishes between IGNORE and ERROR_FOR_NULL and save/restores
check-field options.
mysql-test/r/trigger.result:
Show that UPDATE...SET...NULL on NOT NULL columns doesn't behave differently
when run after a trigger.
mysql-test/t/trigger.test:
Show that UPDATE...SET...NULL on NOT NULL columns doesn't behave differently
when run after a trigger.
sql/field_conv.cc:
CHECK_FIELD_IGNORE was treated as CHECK_FIELD_ERROR_FOR_NULL.
Distinguish between the two.
sql/sp_head.cc:
Raise error as needed.
sql/sql_class.cc:
Save and restore check-fields options.
sql/sql_class.h:
Make room so we can save check-fields options.
sql/sql_insert.cc:
Raise error as needed.
CHECK_FIELD_IGNORE was treated as CHECK_FIELD_ERROR_FOR_NULL;
UPDATE...SET...NULL on NOT NULL fields behaved differently after
a trigger.
Now distinguishes between IGNORE and ERROR_FOR_NULL and save/restores
check-field options.
In BUG#49562 we fixed the case where numeric user var events
would not serialize the flag stating whether the value was signed
or unsigned (unsigned_flag). This fixed the case that the slave
would get an overflow while treating the unsigned values as
signed.
In this bug, we find that the unsigned_flag can sometimes change
between the moment that the user value is recorded for binlogging
purposes and the actual binlogging time. Since we take the
unsigned_flag from the runtime variable data, at binlogging time,
and the variable value is comes from the copy taken earlier in
the execution, there may be inconsistency in the
User_var_log_event between the variable value and its
unsigned_flag.
We fix this by also copying the unsigned_flag of the
user_var_entry when its value is copied, for binlogging
purposes. Later, at binlogging time, we use the copied
unsigned_flag and not the one in the runtime user_var_entry
instance.
In BUG#49562 we fixed the case where numeric user var events
would not serialize the flag stating whether the value was signed
or unsigned (unsigned_flag). This fixed the case that the slave
would get an overflow while treating the unsigned values as
signed.
In this bug, we find that the unsigned_flag can sometimes change
between the moment that the user value is recorded for binlogging
purposes and the actual binlogging time. Since we take the
unsigned_flag from the runtime variable data, at binlogging time,
and the variable value is comes from the copy taken earlier in
the execution, there may be inconsistency in the
User_var_log_event between the variable value and its
unsigned_flag.
We fix this by also copying the unsigned_flag of the
user_var_entry when its value is copied, for binlogging
purposes. Later, at binlogging time, we use the copied
unsigned_flag and not the one in the runtime user_var_entry
instance.
* Implemented a second partial matching strategy via table scan.
This strategy is a fallback when there is no memory for rowid merging.
* Refactored the selection and creation of partial matching strategies,
so that the choice of strategy is encapsulated in a separate method
choose_partial_match_strategy().
* Refactored the representation of partial match strategies so that:
- each strategy is represented by a polymorphic class, and
- the base class for all partial match strategies contains common
execution code.
* Added an estimate of the memory needed for the rowid merge strategy,
and the system variable "rowid_merge_buff_size" to control the maximum
memory to be used by the rowid merge algorithm.
* Added two optimizer_switch system variables to control the choice of
partial match strategy:
"partial_match_rowid_merge", "partial_match_table_scan".
* Fixed multiple problems with deallocation of resources by the partial
match strategies.
sql/mysql_priv.h:
* Added two optimizer_switch system variables to control the choice of
partial match strategy:
"partial_match_rowid_merge", "partial_match_table_scan".
sql/mysqld.cc:
* Added two optimizer_switch system variables to control the choice of
partial match strategy:
"partial_match_rowid_merge", "partial_match_table_scan".
* Added a system variable "rowid_merge_buff_size" to control the maximum
memory to be used by the rowid merge algorithm.
sql/set_var.cc:
* Added a system variable "rowid_merge_buff_size" to control the maximum
memory to be used by the rowid merge algorithm.
sql/sql_class.h:
* Added a system variable "rowid_merge_buff_size" to control the maximum
memory to be used by the rowid merge algorithm.
support-files/build-tags:
Newer versions of BZR require the recursive flag in order to list all files.
This patch prevents system threads and system table accesses from
using user-specified values for "lock_wait_timeout". Instead all
such accesses are done using the default value (1 year).
This prevents background tasks (such as replication, events,
accessing stored function definitions, logging, reading time-zone
information, etc.) from failing in cases where the global value
of "lock_wait_timeout" is set very low.
The patch also simplifies the open tables API. Rather than adding
another convenience function for opening and locking system tables,
this patch removes most of the existing convenience functions for
open_and_lock_tables_derived(). Before, open_and_lock_tables() was
a convenience function that enforced derived tables handling, while
open_and_lock_tables_derived() was the main function where derived
tables handling was optional. Now, this convencience function is
gone and the main function is renamed to open_and_lock_tables().
No test case added as it would have required the use of --sleep to
check that system threads and system tables have a different timeout
value from the user-specified "lock_wait_timeout" system variable.
This patch prevents system threads and system table accesses from
using user-specified values for "lock_wait_timeout". Instead all
such accesses are done using the default value (1 year).
This prevents background tasks (such as replication, events,
accessing stored function definitions, logging, reading time-zone
information, etc.) from failing in cases where the global value
of "lock_wait_timeout" is set very low.
The patch also simplifies the open tables API. Rather than adding
another convenience function for opening and locking system tables,
this patch removes most of the existing convenience functions for
open_and_lock_tables_derived(). Before, open_and_lock_tables() was
a convenience function that enforced derived tables handling, while
open_and_lock_tables_derived() was the main function where derived
tables handling was optional. Now, this convencience function is
gone and the main function is renamed to open_and_lock_tables().
No test case added as it would have required the use of --sleep to
check that system threads and system tables have a different timeout
value from the user-specified "lock_wait_timeout" system variable.
This patch implements correct NULL semantics for materialized subquery execution.
The implementation has the following properties and main limitations:
- It passes all query result tests, but fails a number of EXPLAIN tests because of
changed plans.
- The EXPLAIN output for partial matching is not decided yet.
- It works only when all necessary indexes fit into main memory. Notice that these
are not the general B-tree/Hash indexes, but instead much more compact ones,
therefore this limitation may not be a problem in many practical cases.
- It doesn't contain specialized tests.
- In several places the implementation uses methods that are modified copies of
other similar methods. These cases need to be refactored to avoid code duplication.
- Add a test if the predicate is top-level just before deciding on partial matching.
If it is top-level, use a more efficient exec method (index lookup).
- Add sorting of indexes according to their selectivity. The code is almost there.
- Needs more comments, and to sync existing ones with the implementation.
sql/item_cmpfunc.h:
Expose the Arg_comparator of a comparison predicate. This makes it possible to
directly get the comparison result {-1,0,1}, which is not possible through the
val_XXX() methods which "fold" such results into a boolean.
sql/item_subselect.cc:
The core of the implementation of MWL#68.
sql/item_subselect.h:
The core of the implementation of MWL#68.
sql/opt_subselect.cc:
Removed the limitation for materialized subquery execution that it is applicable only
for top-level predicates.
sql/sql_class.cc:
New class select_materialize_with_stats that collects data statistics about
the data being inserted into the target table.
sql/sql_class.h:
New class select_materialize_with_stats that collects data statistics about
the data being inserted into the target table.
sql/sql_select.cc:
- more complete initialization of the TABLE object of a temp table.
- call setup_subquery_materialization at one more exit point.
