The setting innodb_change_buffering_debug=2 was supposed to inject
a crash during change buffer merge. There is no public test for
that functionality, and even if there were, it would be better
to use DEBUG_SYNC to halt the thread that does change buffer merge,
force a redo log flush from another thread, and finally kill the
server externally.
This allows one to run the test suite even if any of the following
options are changed:
- character-set-server
- collation-server
- join-cache-level
- log-basename
- max-allowed-packet
- optimizer-switch
- query-cache-size and query-cache-type
- skip-name-resolve
- table-definition-cache
- table-open-cache
- Some innodb options
etc
Changes:
- Don't print out the value of system variables as one can't depend on
them to being constants.
- Don't set global variables to 'default' as the default may not
be the same as the test was started with if there was an additional
option file. Instead save original value and reset it at end of test.
- Test that depends on the latin1 character set should include
default_charset.inc or set the character set to latin1
- Test that depends on the original optimizer switch, should include
default_optimizer_switch.inc
- Test that depends on the value of a specific system variable should
set it in the test (like optimizer_use_condition_selectivity)
- Split subselect3.test into subselect3.test and subselect3.inc to
make it easier to set and reset system variables.
- Added .opt files for test that required specfic options that could
be changed by external configuration files.
- Fixed result files in rockdsb & tokudb that had not been updated for
a while.
- mysqltest didn't free read_command_buf
- wait_for_slave_param did write different things to the log if valgrind
was used.
- Table open cache should not write the initial variable value as it
can depend on the configuration or if valgrind is used
- A variable in GetResult was used uninitalized
The general reason why innodb redo log file is limited by 512G is that
log_block_convert_lsn_to_no() returns value limited by 1G. But there is no
need to have unique log block numbers in log group. The fix removes 512G
limit and limits log group size by
(uint32_t maximum value) * (minimum page size), which, in turns, can be
removed if fil_io() is no longer used for innodb redo log io.
There is one directly applicable change to InnoDB:
commit 739f5239f1 in the
5.5 branch will be merged before the next MariaDB releases.
Another potentially applicable change will be tracked
separately as MDEV-20126.
Thus, here we only update the InnoDB version number and do
not change anything else.
- Introduce a new variable called innodb_encrypt_temporary_tables which is
a boolean variable. It decides whether to encrypt the temporary tablespace.
- Encrypts the temporary tablespace based on full checksum format.
- Introduced a new counter to track encrypted and decrypted temporary
tablespace pages.
- Warnings issued if temporary table creation has conflict value with
innodb_encrypt_temporary_tables
- Added a new test case which reads and writes the pages from/to temporary
tablespace.
Fix:
====
1) Combined innodb_ft_result_cache_limit_32.test and
innodb_ft_result_cache_limit_64.test test case in sys_vars suite.
2) Use word_size.inc for combinations of innodb_ft_result_cache_limit test case.
This patch contains the port of the MDEV-18379 patch
for 10.1 branch, but also includes a number of changes
made within MDEV-17835, which are necessary for the
normal operation of tests that use IPv6:
1) Fixed flaws in the galera_3nodes mtr suite control scripts,
because of which they could not work with mariabackup.
2) Fixed numerous bugs in the SST scripts and in the mtr test
files (galera_3nodes mtr suite) that prevented the use of Galera
with IPv6 addresses.
3) Fixed flaws in tests for rsync and mysqldump (for galera_3nodes
mtr tests suite). These tests were not performed successfully
without these fixes.
4) Currently, the three-node mtr suite for Galera (galera_3nodes)
uses a separate IPv6 availability check using the "have_ipv6.inc"
file. This check duplicates a more accurate check at suite.pm
level, which can be used by including the file "check_ipv6.inc".
This patch removes this discrepancy between suites.
5) GAL-501 test in the galera_3nodes suite does not contain the
option "--bind-address=::" which is needed for the test to work
correctly with IPv6 (at least on some systems), since without
it the server will not wait for connections on the IPv6 interface.
https://jira.mariadb.org/browse/MDEV-18379
and partially https://jira.mariadb.org/browse/MDEV-17835
The setting innodb_safe_truncate=ON reduces compatibility with older
versions of MariaDB and backup tools in two ways.
First, we will be writing TRX_UNDO_RENAME_TABLE records, which older
versions do not know about. These records could be misinterpreted if
a DDL transaction was recovered and would be rolled back.
Such rollback is only possible if the server was killed while
an incomplete DDL transaction was persisted. On transaction completion,
the insert_undo log pages would only be repurposed for new undo log
allocations, and their contents would not matter. So, older versions
will not have a problem with innodb_safe_truncate=ON if the server was
shut down cleanly.
Second, to prevent such recovery failure, innodb_safe_truncate=ON will
cause a modification of the redo log format identifier, which will
prevent older versions from starting up after a crash. MariaDB Server
versions older than 10.2.13 will refuse to start up altogether, even
after clean shutdown.
A server restart with innodb_safe_truncate=OFF will restore compatibility
with older server and backup versions.
- Backported the MYSQL_SYSVAR_SIZE_T to 10.0
- The parameter innodb_ft_result_cache_limit was only 32 bits wide
also on 64-bit systems. Make it size_t, so that it will be 64 bits
on 64-bit systems.
- Added a test case that show how innodb_ft_result_cache_limit variables
behaves in 32bit and 64 bit system.
Rename the 10.2-specific configuration option innodb_unsafe_truncate
to innodb_safe_truncate, and invert its value.
The default (for now) is innodb_safe_truncate=OFF, to avoid
disrupting users with an undo and redo log format change within
a Generally Available (GA) release series.
While MariaDB Server 10.2 is not really guaranteed to be compatible
with Percona XtraBackup 2.4 (for example, the MySQL 5.7 undo log format
change that could be present in XtraBackup, but was reverted from
MariaDB in MDEV-12289), we do not want to disrupt users who have
deployed xtrabackup and MariaDB Server 10.2 in their environments.
With this change, MariaDB 10.2 will continue to use the backup-unsafe
TRUNCATE TABLE code, so that neither the undo log nor the redo log
formats will change in an incompatible way.
Undo tablespace truncation will keep using the redo log only. Recovery
or backup with old code will fail to shrink the undo tablespace files,
but the contents will be recovered just fine.
In the MariaDB Server 10.2 series only, we introduce the configuration
parameter innodb_unsafe_truncate and make it ON by default. To allow
MariaDB Backup (mariabackup) to work properly with TRUNCATE TABLE
operations, use loose_innodb_unsafe_truncate=OFF.
MariaDB Server 10.3.10 and later releases will always use the
backup-safe TRUNCATE TABLE, and this parameter will not be
added there.
recv_recovery_rollback_active(): Skip row_mysql_drop_garbage_tables()
unless innodb_unsafe_truncate=OFF. It is too unsafe to drop orphan
tables if RENAME operations are not transactional within InnoDB.
LOG_HEADER_FORMAT_10_3: Replaces LOG_HEADER_FORMAT_CURRENT.
log_init(), log_group_file_header_flush(),
srv_prepare_to_delete_redo_log_files(),
innobase_start_or_create_for_mysql(): Choose the redo log format
and subformat based on the value of innodb_unsafe_truncate.
This patch introduces support for the system variable eq_range_index_dive_limit
that existed in MySQL starting from 5.6. The variable sets a limit for
index dives into equality ranges. Index dives are performed by optimizer
to estimate the number of rows in range scans. Index dives usually provide
good estimate but they are pretty expensive. To estimate the number of rows
in equality ranges statistical data on indexes can be employed. Its usage gives
not so good estimates but it's cheap. So if the number of equality dives
required by an index scan exceeds the set limit no dives for equality
ranges are performed by the optimizer for this index.
As the new system variable is introduced in a stable version the default
value for it is set to a special value meaning there is no limit for the number
of index dives performed by the optimizer.
The patch partially uses the MySQL code for WL 5957
'Statistics-based Range optimization for many ranges'.
This concludes the merge of all applicable InnoDB changes from
MySQL 5.7.23, with the exception of a performance fix, which we
plan to rewrite in MariaDB later in such a way that it does not
involve changing the storage engine API:
MDEV-16849 Extending indexed VARCHAR column should be instantaneous
Introduce the configuration option innodb_log_optimize_ddl
for controlling whether native index creation or table-rebuild
in InnoDB should keep optimizing the redo log
(and writing MLOG_INDEX_LOAD records to ensure that
concurrent backup would fail).
By default, we have innodb_log_optimize_ddl=ON, that is,
the default behaviour that was introduced in MariaDB 10.2.2
(with the merge of InnoDB from MySQL 5.7) will be unchanged.
BtrBulk::m_trx: Replaces m_trx_id. We must be able to check for
KILL QUERY even if !m_flush_observer (innodb_log_optimize_ddl=OFF).
page_cur_insert_rec_write_log(): Declare globally, so that this
can be called from PageBulk::insert().
row_merge_insert_index_tuples(): Remove the unused parameter trx_id.
row_merge_build_indexes(): Enable or disable redo logging based on
the innodb_log_optimize_ddl parameter.
PageBulk::init(), PageBulk::insert(), PageBulk::finish(): Write
redo log records if needed. For ROW_FORMAT=COMPRESSED, redo log
will be written in PageBulk::compress() unless we called
m_mtr.set_log_mode(MTR_LOG_NO_REDO).
