in different default schema.
In strict mode, when data truncation or conversion happens,
THD::killed is set to THD::KILL_BAD_DATA.
This is abuse of KILL mechanism to guarantee that execution
of statement is aborted.
The stored procedures execution, on the other hand,
upon detection that a connection was killed, would
terminate immediately, without trying to restore the caller's
context, in particular, restore the caller's current schema.
The fix is, when terminating a stored procedure execution,
to only bypass cleanup if the entire connection was killed,
not in case of other forms of KILL.
mysql-test/r/sp-bugs.result:
Added result for a test case for bug#54375.
mysql-test/t/sp-bugs.test:
Added test case for bug#54375.
sql/sp_head.cc:
sp_head::execute modified: restore saved current db if
connection is not killed.
in different default schema.
In strict mode, when data truncation or conversion happens,
THD::killed is set to THD::KILL_BAD_DATA.
This is abuse of KILL mechanism to guarantee that execution
of statement is aborted.
The stored procedures execution, on the other hand,
upon detection that a connection was killed, would
terminate immediately, without trying to restore the caller's
context, in particular, restore the caller's current schema.
The fix is, when terminating a stored procedure execution,
to only bypass cleanup if the entire connection was killed,
not in case of other forms of KILL.
The problem was that the warnings risen by a trigger were not cleared upon
successful completion. The warnings should be cleared if the trigger completes
successfully.
The fix is to skip merging warnings into caller's Warning Info for triggers.
The problem was that the warnings risen by a trigger were not cleared upon
successful completion. The warnings should be cleared if the trigger completes
successfully.
The fix is to skip merging warnings into caller's Warning Info for triggers.
set to 128k.
sql/sp.cc:
Added checking for stack overrun at functions
db_load_routine/sp_find_routine.
sql/sp_head.cc:
sp_head::execute() modified: pass constant value STACK_MIN_SIZE
instead of 8 * STACK_MIN_SIZE as second argument value
in call to check_stack_overrun. Added checking for stack overrun
at functions sp_lex_keeper::reset_lex_and_exec_core/sp_instr_stmt::execute.
sql/sql_parse.cc:
check_stack_overrun modified: allocate buffer for error message
at heap instead of stack.
parse_sql modified: added call to check_stack_overrun() before
parsing of sql statement.
set to 128k.
mysql-test/collections/default.experimental:
Re-enabled test rpl.rpl_row_sp011*.
sql/sp_head.cc:
sp_head::execute() modified: pass constant value 2 * STACK_MIN_SIZE
instead of 8 * STACK_MIN_SIZE as a second argument value
in call to check_stack_overrun.
Fall back to use ALTER TABLE for engines that doesn't support REPAIR when doing repair for upgrade.
Nicer output from mysql_upgrade and mysql_check
Updated all arrays that used NAME_LEN to use SAFE_NAME_LEN to ensure that we don't break things accidently as names can now have a #mysql50# prefix.
client/mysql_upgrade.c:
If we are using verbose, also run mysqlcheck in verbose mode.
client/mysqlcheck.c:
Add more information if running in verbose mode
Print 'Needs upgrade' instead of complex error if table needs to be upgraded
Don't write connect information if verbose is not 2 or above
mysql-test/r/drop.result:
Updated test and results as we now support full table names
mysql-test/r/grant.result:
Now you get a correct error message if using #mysql with paths
mysql-test/r/show_check.result:
Update results as table names can temporarly be bigger than NAME_LEN (during upgrade)
mysql-test/r/upgrade.result:
Test upgrade for long table names.
mysql-test/suite/funcs_1/r/is_tables_is.result:
Updated old test result (had note been updated in a while)
mysql-test/t/drop.test:
Updated test and results as we now support full table names
mysql-test/t/grant.test:
Now you get a correct error message if using #mysql with paths
mysql-test/t/upgrade.test:
Test upgrade for long table names.
sql/ha_partition.cc:
NAME_LEN -> SAFE_NAME_LEN
sql/item.cc:
NAME_LEN -> SAFE_NAME_LEN
sql/log_event.cc:
NAME_LEN -> SAFE_NAME_LEN
sql/mysql_priv.h:
Added SAFE_NAME_LEN
sql/rpl_filter.cc:
NAME_LEN -> SAFE_NAME_LEN
sql/sp.cc:
NAME_LEN -> SAFE_NAME_LEN
sql/sp_head.cc:
NAME_LEN -> SAFE_NAME_LEN
sql/sql_acl.cc:
NAME_LEN -> SAFE_NAME_LEN
sql/sql_base.cc:
NAME_LEN -> SAFE_NAME_LEN
sql/sql_connect.cc:
NAME_LEN -> SAFE_NAME_LEN
sql/sql_parse.cc:
NAME_LEN -> SAFE_NAME_LEN
sql/sql_prepare.cc:
NAME_LEN -> SAFE_NAME_LEN
sql/sql_select.cc:
NAME_LEN -> SAFE_NAME_LEN
sql/sql_show.cc:
NAME_LEN -> SAFE_NAME_LEN
Enlarge table names for SHOW TABLES to also include optional #mysql50#
sql/sql_table.cc:
Fall back to use ALTER TABLE for engines that doesn't support REPAIR when doing repair for upgrade.
sql/sql_trigger.cc:
NAME_LEN -> SAFE_NAME_LEN
sql/sql_udf.cc:
NAME_LEN -> SAFE_NAME_LEN
sql/sql_view.cc:
NAME_LEN -> SAFE_NAME_LEN
sql/table.cc:
Fixed check_table_name() to not count #mysql50# as part of name
If #mysql50# is part of the name, don't allow path characters in name.
After BUG#36649, warnings for sub-statements are cleared when a
new sub-statement is started. This is problematic since it suppresses
warnings for unsafe statements in some cases. It is important that we
always give a warning to the client, because the user needs to know
when there is a risk that the slave goes out of sync.
We fixed the problem by generating warning messages for unsafe statements
while returning from a stored procedure, function, trigger or while
executing a top level statement.
We also started checking unsafeness when both performance and log tables are
used. This is necessary after the performance schema which does a distinction
between performance and log tables.
mysql-test/extra/rpl_tests/create_recursive_construct.inc:
Changed the order of the calls in the procedure because the code
that checks if a warning message is printed out expects that the
first statement gives an warning what is not the case for INSERT
INTO ta$CRC_ARG_level VALUES (47);
mysql-test/suite/binlog/r/binlog_stm_unsafe_warning.result:
Updated the result file.
mysql-test/suite/binlog/r/binlog_unsafe.result:
There are several changes here:
(1) - Changed the CREATE PROCEDURE $CRC.
(2) - The procedure $CRC was failing and the content of the binlog
was being printed out, after fix (1) the failure disappeared.
(3) - The warning message for unsafeness due to auto-increment collumns was
changed.
(4) - The warning message for unsafeness due to VERSION(), RAND() was changed.
mysql-test/suite/binlog/t/binlog_stm_unsafe_warning.test:
Tested filters.
mysql-test/suite/binlog/t/binlog_unsafe.test:
Reenabled the test case binlog_unsafe.
mysql-test/suite/binlog/t/disabled.def:
Reenabled the test case binlog_unsafe.
mysql-test/suite/rpl/r/rpl_begin_commit_rollback.result:
Updated the result file.
mysql-test/suite/rpl/r/rpl_non_direct_stm_mixing_engines.result:
Updated the result file.
mysql-test/suite/rpl/r/rpl_stm_auto_increment_bug33029.result:
Updated the result file.
sql/sql_class.cc:
Moved the stmt_accessed_table_flag variable and related information to the
LEX as we need the variable reset after each statement even inside a stored
procedure, what did not happen if the information was in the THD.
Changed the routine in the THD::binlog_query that prints the warning
messages to avoid trying to print them when inside a stored procedure,
function or trigger.
Checked for unsafeness when both performance and log tables where used.
After the introduction of the performance schema, we need to check both.
After BUG#36649, warnings for sub-statements are cleared when a
new sub-statement is started. This is problematic since it suppresses
warnings for unsafe statements in some cases. It is important that we
always give a warning to the client, because the user needs to know
when there is a risk that the slave goes out of sync.
We fixed the problem by generating warning messages for unsafe statements
while returning from a stored procedure, function, trigger or while
executing a top level statement.
We also started checking unsafeness when both performance and log tables are
used. This is necessary after the performance schema which does a distinction
between performance and log tables.
******
This patch fixes the following bugs:
- Bug#5889: Exit handler for a warning doesn't hide the warning in
trigger
- Bug#9857: Stored procedures: handler for sqlwarning ignored
- Bug#23032: Handlers declared in a SP do not handle warnings generated
in sub-SP
- Bug#36185: Incorrect precedence for warning and exception handlers
The problem was in the way warnings/errors during stored routine execution
were handled. Prior to this patch the logic was as follows:
- when a warning/an error happens: if we're executing a stored routine,
and there is a handler for that warning/error, remember the handler,
ignore the warning/error and continue execution.
- after a stored routine instruction is executed: check for a remembered
handler and activate one (if any).
This logic caused several problems:
- if one instruction generates several warnings (errors) it's impossible
to choose the right handler -- a handler for the first generated
condition was chosen and remembered for activation.
- mess with handling conditions in scopes different from the current one.
- not putting generated warnings/errors into Warning Info (Diagnostic
Area) is against The Standard.
The patch changes the logic as follows:
- Diagnostic Area is cleared on the beginning of each statement that
either is able to generate warnings, or is able to work with tables.
- at the end of a stored routine instruction, Diagnostic Area is left
intact.
- Diagnostic Area is checked after each stored routine instruction. If
an instruction generates several condition, it's now possible to take a
look at all of them and determine an appropriate handler.
mysql-test/r/signal.result:
Update result file:
1. handled conditions are not cleared any more;
2. reflect changes in signal.test
mysql-test/r/signal_demo3.result:
Update result file: handled conditions are not cleared any more.
Due to playing with max_error_count, resulting warning lists
have changed.
mysql-test/r/sp-big.result:
Update result file: handled conditions are not cleared any more.
mysql-test/r/sp-bugs.result:
Update result file: handled conditions are not cleared any more.
mysql-test/r/sp-code.result:
Update result file:
1. handled conditions are not cleared any more.
2. add result for a new test case in sp-code.test.
mysql-test/r/sp-error.result:
Update result file:
1. handled conditions are not cleared any more.
2. add result for a new test case in sp-error.test.
mysql-test/r/sp.result:
Update result file: handled conditions are not cleared any more.
mysql-test/r/sp_trans.result:
Update result file: handled conditions are not cleared any more.
mysql-test/r/strict.result:
Update result file: handled conditions are not cleared any more.
mysql-test/r/view.result:
Update result file: handled conditions are not cleared any more.
mysql-test/suite/funcs_1/r/innodb_storedproc_02.result:
Update result file: handled conditions are not cleared any more.
mysql-test/suite/funcs_1/r/memory_storedproc_02.result:
Update result file: handled conditions are not cleared any more.
mysql-test/suite/funcs_1/r/myisam_storedproc_02.result:
Update result file: handled conditions are not cleared any more.
mysql-test/suite/funcs_1/r/storedproc.result:
Update result file: handled conditions are not cleared any more.
mysql-test/suite/rpl/r/rpl_row_sp005.result:
Update result file: handled conditions are not cleared any more.
mysql-test/suite/rpl/r/rpl_row_sp006_InnoDB.result:
Update result file: handled conditions are not cleared any more.
mysql-test/suite/rpl/r/rpl_row_trig003.result:
Update result file: handled conditions are not cleared any more.
mysql-test/t/signal.test:
Make a test case more readable in the result file.
mysql-test/t/sp-code.test:
Add a test case for Bug#23032 checking that
No Data takes precedence on Warning.
mysql-test/t/sp-error.test:
Adding test cases for:
- Bug#23032
- Bug#36185
- Bug#5889
- Bug#9857
mysql-test/t/sp.test:
Fixing test case to reflect behavioral changes made by the patch.
sql/sp_head.cc:
Reset the per-statement warning count before executing
a stored procedure instruction.
Move to a separate function code which checks the
completion status of the executed statement and searches
for a handler.
Remove redundant code now that search for a handler is
done after execution, errors are always pushed.
sql/sp_pcontext.h:
Remove unused code.
sql/sp_rcontext.cc:
- Polish sp_rcontext::find_handler(): use sp_rcontext::m_hfound instead
of an extra local variable;
- Remove sp_rcontext::handle_condition();
- Introduce sp_rcontext::activate_handler(), which prepares
previously found handler for execution.
- Move sp_rcontext::enter_handler() code into activate_handler(),
because enter_handler() is used only from there;
- Cleanups;
- Introduce DBUG_EXECUTE_IF() for a test case in sp-code.test
sql/sp_rcontext.h:
- Remove unused code
- Cleanups
sql/sql_class.cc:
Merge THD::raise_condition_no_handler() into THD::raise_condition().
After the patch raise_condition_no_handler() was called
in raise_condition() only.
sql/sql_class.h:
Remove raise_condition_no_handler().
sql/sql_error.cc:
Remove Warning_info::reserve_space() -- handled conditions are not
cleared any more, so there is no need for RESIGNAL to re-push them.
sql/sql_error.h:
Remove Warning_info::reserve_space().
sql/sql_signal.cc:
Handled conditions are not cleared any more,
so there is no need for RESIGNAL to re-push them.
******
This patch fixes the following bugs:
- Bug#5889: Exit handler for a warning doesn't hide the warning in
trigger
- Bug#9857: Stored procedures: handler for sqlwarning ignored
- Bug#23032: Handlers declared in a SP do not handle warnings generated
in sub-SP
- Bug#36185: Incorrect precedence for warning and exception handlers
The problem was in the way warnings/errors during stored routine execution
were handled. Prior to this patch the logic was as follows:
- when a warning/an error happens: if we're executing a stored routine,
and there is a handler for that warning/error, remember the handler,
ignore the warning/error and continue execution.
- after a stored routine instruction is executed: check for a remembered
handler and activate one (if any).
This logic caused several problems:
- if one instruction generates several warnings (errors) it's impossible
to choose the right handler -- a handler for the first generated
condition was chosen and remembered for activation.
- mess with handling conditions in scopes different from the current one.
- not putting generated warnings/errors into Warning Info (Diagnostic
Area) is against The Standard.
The patch changes the logic as follows:
- Diagnostic Area is cleared on the beginning of each statement that
either is able to generate warnings, or is able to work with tables.
- at the end of a stored routine instruction, Diagnostic Area is left
intact.
- Diagnostic Area is checked after each stored routine instruction. If
an instruction generates several condition, it's now possible to take a
look at all of them and determine an appropriate handler.
This patch also fixes Bug#55452 "SET PASSWORD is
replicated twice in RBR mode".
The goal of this patch is to remove the release of
metadata locks from close_thread_tables().
This is necessary to not mistakenly release
the locks in the course of a multi-step
operation that involves multiple close_thread_tables()
or close_tables_for_reopen().
On the same token, move statement commit outside
close_thread_tables().
Other cleanups:
Cleanup COM_FIELD_LIST.
Don't call close_thread_tables() in COM_SHUTDOWN -- there
are no open tables there that can be closed (we leave
the locked tables mode in THD destructor, and this
close_thread_tables() won't leave it anyway).
Make open_and_lock_tables() and open_and_lock_tables_derived()
call close_thread_tables() upon failure.
Remove the calls to close_thread_tables() that are now
unnecessary.
Simplify the back off condition in Open_table_context.
Streamline metadata lock handling in LOCK TABLES
implementation.
Add asserts to ensure correct life cycle of
statement transaction in a session.
Remove a piece of dead code that has also become redundant
after the fix for Bug 37521.
mysql-test/r/variables.result:
Update results: set @@autocommit and statement transaction/
prelocked mode.
mysql-test/r/view.result:
A harmless change in CHECK TABLE <view> status for a broken view.
If previously a failure to prelock all functions used in a view
would leave the connection in LTM_PRELOCKED mode, now we call
close_thread_tables() from open_and_lock_tables()
and leave prelocked mode, thus some check in mysql_admin_table() that
works only in prelocked/locked tables mode is no longer activated.
mysql-test/suite/rpl/r/rpl_row_implicit_commit_binlog.result:
Fixed Bug#55452 "SET PASSWORD is replicated twice in
RBR mode": extra binlog events are gone from the
binary log.
mysql-test/t/variables.test:
Add a test case: set autocommit and statement transaction/prelocked
mode.
sql/event_data_objects.cc:
Simplify code in Event_job_data::execute().
Move sp_head memory management to lex_end().
sql/event_db_repository.cc:
Move the release of metadata locks outside
close_thread_tables().
Make sure we call close_thread_tables() when
open_and_lock_tables() fails and remove extra
code from the events data dictionary.
Use close_mysql_tables(), a new internal
function to properly close mysql.* tables
in the data dictionary.
Contract Event_db_repository::drop_events_by_field,
drop_schema_events into one function.
When dropping all events in a schema,
make sure we don't mistakenly release all
locks acquired by DROP DATABASE. These
include locks on the database name
and the global intention exclusive
metadata lock.
sql/event_db_repository.h:
Function open_event_table() does not require an instance
of Event_db_repository.
sql/events.cc:
Use close_mysql_tables() instead of close_thread_tables()
to bootstrap events, since the latter no longer
releases metadata locks.
sql/ha_ndbcluster.cc:
- mysql_rm_table_part2 no longer releases
acquired metadata locks. Do it in the caller.
sql/ha_ndbcluster_binlog.cc:
Deploy the new protocol for closing thread
tables in run_query() and ndb_binlog_index
code.
sql/handler.cc:
Assert that we never call ha_commit_trans/
ha_rollback_trans in sub-statement, which
is now the case.
sql/handler.h:
Add an accessor to check whether THD_TRANS object
is empty (has no transaction started).
sql/log.cc:
Update a comment.
sql/log_event.cc:
Since now we commit/rollback statement transaction in
mysql_execute_command(), we need a mechanism to communicate
from Query_log_event::do_apply_event() to mysql_execute_command()
that the statement transaction should be rolled back, not committed.
Ideally it would be a virtual method of THD. I hesitate
to make THD a virtual base class in this already large patch.
Use a thd->variables.option_bits for now.
Remove a call to close_thread_tables() from the slave IO
thread. It doesn't open any tables, and the protocol
for closing thread tables is more complicated now.
Make sure we properly close thread tables, however,
in Load_data_log_event, which doesn't
follow the standard server execution procedure
with mysql_execute_command().
@todo: this piece should use Server_runnable
framework instead.
Remove an unnecessary call to mysql_unlock_tables().
sql/rpl_rli.cc:
Update Relay_log_info::slave_close_thread_tables()
to follow the new close protocol.
sql/set_var.cc:
Remove an unused header.
sql/slave.cc:
Remove an unnecessary call to
close_thread_tables().
sql/sp.cc:
Remove unnecessary calls to close_thread_tables()
from SP DDL implementation. The tables will
be closed by the caller, in mysql_execute_command().
When dropping all routines in a database, make sure
to not mistakenly drop all metadata locks acquired
so far, they include the scoped lock on the schema.
sql/sp_head.cc:
Correct the protocol that closes thread tables
in an SP instruction.
Clear lex->sphead before cleaning up lex
with lex_end to make sure that we don't
delete the sphead twice. It's considered
to be "cleaner" and more in line with
future changes than calling delete lex->sphead
in other places that cleanup the lex.
sql/sp_head.h:
When destroying m_lex_keeper of an instruction,
don't delete the sphead that all lex objects
share.
@todo: don't store a reference to routine's sp_head
instance in instruction's lex.
sql/sql_acl.cc:
Don't call close_thread_tables() where the caller will
do that for us.
Fix Bug#55452 "SET PASSWORD is replicated twice in RBR
mode" by disabling RBR replication in change_password()
function.
Use close_mysql_tables() in bootstrap and ACL reload
code to make sure we release all metadata locks.
sql/sql_base.cc:
This is the main part of the patch:
- remove manipulation with thd->transaction
and thd->mdl_context from close_thread_tables().
Now this function is only responsible for closing
tables, nothing else.
This is necessary to be able to easily use
close_thread_tables() in procedures, that
involve multiple open/close tables, which all
need to be protected continuously by metadata
locks.
Add asserts ensuring that TABLE object
is only used when is protected by a metadata lock.
Simplify the back off condition of Open_table_context,
we no longer need to look at the autocommit mode.
Make open_and_lock_tables() and open_normal_and_derived_tables()
close thread tables and release metadata locks acquired so-far
upon failure. This simplifies their usage.
Implement close_mysql_tables().
sql/sql_base.h:
Add declaration for close_mysql_tables().
sql/sql_class.cc:
Remove a piece of dead code that has also become redundant
after the fix for Bug 37521.
The code became dead when my_eof() was made a non-protocol method,
but a method that merely modifies the diagnostics area.
The code became redundant with the fix for Bug#37521, when
we started to cal close_thread_tables() before
Protocol::end_statement().
sql/sql_do.cc:
Do nothing in DO if inside a substatement
(the assert moved out of trans_rollback_stmt).
sql/sql_handler.cc:
Add comments.
sql/sql_insert.cc:
Remove dead code.
Release metadata locks explicitly at the
end of the delayed insert thread.
sql/sql_lex.cc:
Add destruction of lex->sphead to lex_end(),
lex "reset" method called at the end of each statement.
sql/sql_parse.cc:
Move close_thread_tables() and other related
cleanups to mysql_execute_command()
from dispatch_command(). This has become
possible after the fix for Bug#37521.
Mark federated SERVER statements as DDL.
Next step: make sure that we don't store
eof packet in the query cache, and move
the query cache code outside mysql_parse.
Brush up the code of COM_FIELD_LIST.
Remove unnecessary calls to close_thread_tables().
When killing a query, don't report "OK"
if it was a suicide.
sql/sql_parse.h:
Remove declaration of a function that is now static.
sql/sql_partition.cc:
Remove an unnecessary call to close_thread_tables().
sql/sql_plugin.cc:
open_and_lock_tables() will clean up
after itself after a failure.
Move close_thread_tables() above
end: label, and replace with close_mysql_tables(),
which will also release the metadata lock
on mysql.plugin.
sql/sql_prepare.cc:
Now that we no longer release locks in close_thread_tables()
statement prepare code has become more straightforward.
Remove the now redundant check for thd->killed() (used
only by the backup project) from Execute_server_runnable.
Reorder code to take into account that now mysql_execute_command()
performs lex->unit.cleanup() and close_thread_tables().
sql/sql_priv.h:
Add a new option to server options to interact
between the slave SQL thread and execution
framework (hack). @todo: use a virtual
method of class THD instead.
sql/sql_servers.cc:
Due to Bug 25705 replication of
DROP/CREATE/ALTER SERVER is broken.
Make sure at least we do not attempt to
replicate these statements using RBR,
as this violates the assert in close_mysql_tables().
sql/sql_table.cc:
Do not release metadata locks in mysql_rm_table_part2,
this is done by the caller.
Do not call close_thread_tables() in mysql_create_table(),
this is done by the caller.
Fix a bug in DROP TABLE under LOCK TABLES when,
upon error in wait_while_table_is_used() we would mistakenly
release the metadata lock on a non-dropped table.
Explicitly release metadata locks when doing an implicit
commit.
sql/sql_trigger.cc:
Now that we delete lex->sphead in lex_end(),
zero the trigger's sphead in lex after loading
the trigger, to avoid double deletion.
sql/sql_udf.cc:
Use close_mysql_tables() instead of close_thread_tables().
sql/sys_vars.cc:
Remove code added in scope of WL#4284 which would
break when we perform set @@session.autocommit along
with setting other variables and using tables or functions.
A test case added to variables.test.
sql/transaction.cc:
Add asserts.
sql/tztime.cc:
Use close_mysql_tables() rather than close_thread_tables().
This patch also fixes Bug#55452 "SET PASSWORD is
replicated twice in RBR mode".
The goal of this patch is to remove the release of
metadata locks from close_thread_tables().
This is necessary to not mistakenly release
the locks in the course of a multi-step
operation that involves multiple close_thread_tables()
or close_tables_for_reopen().
On the same token, move statement commit outside
close_thread_tables().
Other cleanups:
Cleanup COM_FIELD_LIST.
Don't call close_thread_tables() in COM_SHUTDOWN -- there
are no open tables there that can be closed (we leave
the locked tables mode in THD destructor, and this
close_thread_tables() won't leave it anyway).
Make open_and_lock_tables() and open_and_lock_tables_derived()
call close_thread_tables() upon failure.
Remove the calls to close_thread_tables() that are now
unnecessary.
Simplify the back off condition in Open_table_context.
Streamline metadata lock handling in LOCK TABLES
implementation.
Add asserts to ensure correct life cycle of
statement transaction in a session.
Remove a piece of dead code that has also become redundant
after the fix for Bug 37521.
Logging slow stored procedures caused the slow log to write
very large lock times. The lock times was a result of a
negative number being cast to an unsigned integer.
The reason the lock time appeard negative was because
one of the measurements points was reset after execution
causing it to change order with the start time of the
statement.
This bug is related to bug 47905 which in turn was
introduced because of a joint fix for 12480,12481,12482 and 11587.
The fix is to only reset the start_time before any statement
execution in a SP while not resetting start_utime or
utime_after_lock which are used for measuring the
performance of the SP. Start_time is used to set the
timestamp on the replication event which controlls how
the slave interprets time functions like NOW().
Logging slow stored procedures caused the slow log to write
very large lock times. The lock times was a result of a
negative number being cast to an unsigned integer.
The reason the lock time appeard negative was because
one of the measurements points was reset after execution
causing it to change order with the start time of the
statement.
This bug is related to bug 47905 which in turn was
introduced because of a joint fix for 12480,12481,12482 and 11587.
The fix is to only reset the start_time before any statement
execution in a SP while not resetting start_utime or
utime_after_lock which are used for measuring the
performance of the SP. Start_time is used to set the
timestamp on the replication event which controlls how
the slave interprets time functions like NOW().
Conflicts:
Text conflict in mysql-test/r/archive.result
Contents conflict in mysql-test/r/innodb_bug38231.result
Text conflict in mysql-test/r/mdl_sync.result
Text conflict in mysql-test/suite/binlog/t/disabled.def
Text conflict in mysql-test/suite/rpl_ndb/r/rpl_ndb_binlog_format_errors.result
Text conflict in mysql-test/t/archive.test
Contents conflict in mysql-test/t/innodb_bug38231.test
Text conflict in mysql-test/t/mdl_sync.test
Text conflict in sql/sp_head.cc
Text conflict in sql/sql_show.cc
Text conflict in sql/table.cc
Text conflict in sql/table.h
Conflicts:
Text conflict in mysql-test/r/archive.result
Contents conflict in mysql-test/r/innodb_bug38231.result
Text conflict in mysql-test/r/mdl_sync.result
Text conflict in mysql-test/suite/binlog/t/disabled.def
Text conflict in mysql-test/suite/rpl_ndb/r/rpl_ndb_binlog_format_errors.result
Text conflict in mysql-test/t/archive.test
Contents conflict in mysql-test/t/innodb_bug38231.test
Text conflict in mysql-test/t/mdl_sync.test
Text conflict in sql/sp_head.cc
Text conflict in sql/sql_show.cc
Text conflict in sql/table.cc
Text conflict in sql/table.h
Fixed some bugs introduced in 5.1.47
Disabled some tests until we have merged with latest Xtradb
configure.in:
Added testing if valgrind/memcheck.h exists
storage/pbxt/src/ha_pbxt.cc:
LOCK_plugin is not anymore locked in init
transactional SELECT and ALTER TABLE ... REBUILD PARTITION".
The goal of this patch is to decouple type of metadata
lock acquired for table by open_tables() from type of
table-level lock to be acquired on it.
To achieve this we change approach to how we determine what
type of metadata lock should be acquired on table to be open.
Now instead of inferring it at open_tables() time from flags
and type of table-level lock we rely on that type of metadata
lock is properly set at parsing time and is not changed
further.
sql/ha_ndbcluster.cc:
Now one needs to properly initialize table list element's
MDL_request object before calling mysql_rm_table_part2().
sql/lock.cc:
lock_table_names() no longer initializes table list elements'
MDL_request objects. Now proper initialization of these
requests is a responsibility of the caller.
sql/lock.h:
Removed MYSQL_OPEN_TAKE_UPGRADABLE_MDL flag which became
unnecessary. Thanks to the fact that we don't reset type of
requests for metadata locks between re-executions we now can
figure out that upgradable locks are requested by simply
looking at their type which were set in the parser. As result
this flag became redundant.
sql/mdl.h:
Added version of new operator which simplifies allocation of
MDL_request objects on a MEM_ROOT.
sql/sp_head.cc:
Added comment explaining why it is OK to infer type of
metadata lock to request from type of table-level lock
for prelocking.
Added enum_mdl_type argument to sp_add_to_query_tables()
to simplify its usage in trigger implementation.
sql/sp_head.h:
Added enum_mdl_type argument to sp_add_to_query_tables()
to simplify its usage in trigger implementation.
sql/sql_base.cc:
- open_table_get_mdl_lock():
Preserve type of MDL_request for table list element which
was set in the parser by creating MDL_request objects on
memory root if MYSQL_OPEN_FORCE_SHARED_MDL or
MYSQL_OPEN_FORCE_SHARED_HIGH_PRIO_MDL flag were specified.
Thanks to this and to the fact that we no longer reset
type of requests for metadata locks between re-executions
we no longer need to acquire exclusive metadata lock on
table to be created in a special way. This lock is acquired
by code handling acquiring of upgradable locks.
Also changed signature/calling convention for this function
to simplify its usage.
- Accordingly special lock strategy for table list elements
which was used for such locks became unnecessary and was
removed. Other strategies were renamed.
- Since we no longer have guarantee that MDL_request object
which were not satisfied due to lock conflict belongs to
table list element Open_table_context class and its methods
were extended to remember pointer to MDL_request which has
caused problem at request_backoff_action() time and use it
in recover_from_failed_open(). Similar approach is used
for cases when problem from which we need to recover is
not related to MDL but to the table itself. In this case
we store pointer to the element of table list.
- Changed open_tables()/open_tables_check_upgradable_mdl()/
open_tables_acquire_upgradable_mdl() not to rely on
MYSQL_OPEN_TAKE_UPGRADABLE_MDL flag to understand when
upgradable metadata locks should be acquired and not to
infer type of MDL lock from type of table-level lock.
Instead we assume that type of MDL to be acquired was set
in the parser (we can do this as type of MDL_request is
no longer reset between re-executions).
sql/sql_class.h:
Since we no longer have guarantee that MDL_request object
which were not satisfied due to lock conflict belongs to
table list element Open_table_context class and its methods
were extended to remember pointer to MDL_request which has
caused problem at request_backoff_action() time and use it
in recover_from_failed_open(). Similar approach is used
for cases when problem from which we need to recover is
not related to MDL but to the table itself. In this case
we store pointer to the element of table list.
sql/sql_db.cc:
Now one needs to properly initialize table list element's
MDL_request object before calling mysql_rm_table_part2()
or mysql_rename_tables().
sql/sql_lex.cc:
st_select_lex/st_select_lex_node::add_table_to_list() method
now has argument which allows specify type of metadata lock
to be requested for table list element being added.
sql/sql_lex.h:
- st_select_lex/st_select_lex_node::add_table_to_list()
method now has argument which specifies type of metadata
lock to be requested for table list element being added.
This allows to explicitly set type of MDL lock to be
acquired for a DDL statement in parser. It is also more
future-proof than inferring type of MDL request from type
of table-level lock.
- Added Yacc_state::m_mdl_type member which specifies which
type of metadata lock should be requested for tables to be
added to table list by a grammar rule in cases when the same
rule is used in several statements requiring different kinds
of metadata locks.
sql/sql_parse.cc:
- st_select_lex::add_table_to_list() method now has argument
which specifies type of metadata lock to be requested for
table list element being added. This allows to explicitly
set type of MDL lock to be acquired for a DDL statement in
parser. It is also more future-proof than inferring type of
MDL request from type of table-level lock.
- EXCLUSIVE_DOWNGRADABLE_MDL lock strategy has a new name -
OTLS_DOWNGRADE_IF_EXISTS.
- Adjusted LOCK TABLES implementation to the fact that we no
longer infer type of metadata lock to be acquired from table
level lock and that type of MDL request is set at parsing.
And thus MYSQL_OPEN_TAKE_UPGRADABLE_MDL flag became
unnecessary.
sql/sql_prepare.cc:
TABLE_LIST's lock strategy SHARED_MDL was renamed to OTLS_NONE
as now it means that metadata lock should not be changed during
call to open_table() (if it has been already acquired) and is
also used for exclusive metadata lock.
sql/sql_show.cc:
st_select_lex::add_table_to_list() method now has argument
which specifies type of metadata lock to be requested for
table list element being added.
sql/sql_table.cc:
- Adjusted mysql_admin_table()'s code to the fact that
open_tables() no longer determines what kind of metadata
lock should be obtained basing on type of table-level
lock and flags. Instead type of metadata lock for table
to be open should be set before calling open_tables().
- Changed mysql_alter_table() code to the facts:
a) that now it is responsibility of caller to properly
initalize MDL_request in table list elements before calling
lock_table_names()
b) and that MYSQL_OPEN_TAKE_UPGRADABLE_MDL is no longer
necessary since type of metadata lock to be obtained
at open_tables() time is set during parsing.
- Changed code of mysql_recreate_table() to properly set
type of metadata and table-level lock to be obtained
by mysql_alter_table() which it calls.
sql/sql_trigger.cc:
Instead of relying on MYSQL_OPEN_TAKE_UPGRADABLE_MDL flag to
force open_tables() to take an upgradable lock we now specify
exact type of lock to be taken when constructing table list
element for table to be open for CREATE/DROP TRIGGER.
sql/sql_view.cc:
We no longer use TABLE_LIST::EXCLUSIVE_MDL strategy to force
open_tables() to take an exclusive metadata lock on view to
be created. Instead we rely on parser setting proper type of
metadata lock to request and open_tables() acquiring it.
This became possible thanks to the fact that we no longer
reset type of MDL_request between statement re-executions.
sql/sql_yacc.yy:
Instead of inferring type of MDL_request for table to be
open from type of table-level lock and flags passed to
open_tables() we now explicitly specify them at parsing.
This became possible thanks to the fact that we no longer
reset type of MDL_request between statement re-executions.
In future this should allow to decouple type of metadata
lock from type of table-level lock.
The only exception to this approach is statements implemented
through mysql_admin_table() which re-uses same table list
element several times with different types of table-level
and metadata locks.
We now also properly initialize MDL_request objects for table
list elements which are later passed to lock_table_names()
function.
sql/table.cc:
Do not reset type of MDL_request between statement
re-executions. This became unnecessesary as we no longer
change type of MDL_request residing in table list element.
In its turn this change allows to set type of MDL_request
only once - at parsing time.
sql/table.h:
Got rid of TABLE_LIST::EXCLUSIVE_MDL lock strategy.
Now we can specify that we need to acquire exclusive lock
on table to be processed by open_tables() through setting
an appropriate type of MDL_request at parsing time (this
became possible thanks to the fact that we no longer reset
types of MDL_request's belonging to table list elements
between statement re-execution).
Strategy SHARED_MDL was renamed to OTLS_NONE as now it
means that metadata lock should not be changed during call
to open_table() (if it has been already acquired) and is
also used for exclusive metadata lock.
Strategy EXCLUSIVE_DOWNGRADABLE_MDL was renamed to
OTLS_DOWNGRADE_IF_EXISTS.
transactional SELECT and ALTER TABLE ... REBUILD PARTITION".
The goal of this patch is to decouple type of metadata
lock acquired for table by open_tables() from type of
table-level lock to be acquired on it.
To achieve this we change approach to how we determine what
type of metadata lock should be acquired on table to be open.
Now instead of inferring it at open_tables() time from flags
and type of table-level lock we rely on that type of metadata
lock is properly set at parsing time and is not changed
further.
Conflicts:
Text conflict in mysql-test/r/explain.result
Text conflict in mysql-test/t/explain.test
Text conflict in sql/net_serv.cc
Text conflict in sql/sp_head.cc
Text conflict in sql/sql_priv.h
Conflicts:
Text conflict in mysql-test/r/explain.result
Text conflict in mysql-test/t/explain.test
Text conflict in sql/net_serv.cc
Text conflict in sql/sp_head.cc
Text conflict in sql/sql_priv.h
Fix for bug #46947 "Embedded SELECT without FOR UPDATE is
causing a lock", with after-review fixes.
SELECT statements with subqueries referencing InnoDB tables
were acquiring shared locks on rows in these tables when they
were executed in REPEATABLE-READ mode and with statement or
mixed mode binary logging turned on.
This was a regression which were introduced when fixing
bug 39843.
The problem was that for tables belonging to subqueries
parser set TL_READ_DEFAULT as a lock type. In cases when
statement/mixed binary logging at open_tables() time this
type of lock was converted to TL_READ_NO_INSERT lock at
open_tables() time and caused InnoDB engine to acquire
shared locks on reads from these tables. Although in some
cases such behavior was correct (e.g. for subqueries in
DELETE) in case of SELECT it has caused unnecessary locking.
This patch tries to solve this problem by rethinking our
approach to how we handle locking for SELECT and subqueries.
Now we always set TL_READ_DEFAULT lock type for all cases
when we read data. When at open_tables() time this lock
is interpreted as TL_READ_NO_INSERT or TL_READ depending
on whether this statement as a whole or call to function
which uses particular table should be written to the
binary log or not (if yes then statement should be properly
serialized with concurrent statements and stronger lock
should be acquired).
Test coverage is added for both InnoDB and MyISAM.
This patch introduces an "incompatible" change in locking
scheme for subqueries used in SELECT ... FOR UPDATE and
SELECT .. IN SHARE MODE.
In 4.1 the server would use a snapshot InnoDB read for
subqueries in SELECT FOR UPDATE and SELECT .. IN SHARE MODE
statements, regardless of whether the binary log is on or off.
If the user required a different type of read (i.e. locking read),
he/she could request so explicitly by providing FOR UPDATE/IN SHARE MODE
clause for each individual subquery.
On of the patches for 5.0 broke this behaviour (which was not documented
or tested), and started to use locking reads fora all subqueries in SELECT ...
FOR UPDATE/IN SHARE MODE. This patch restored 4.1 behaviour.
mysql-test/include/check_concurrent_insert.inc:
Added auxiliary script which allows to check if statement
reading table allows concurrent inserts in it.
mysql-test/include/check_no_concurrent_insert.inc:
Added auxiliary script which allows to check that statement
reading table doesn't allow concurrent inserts in it.
mysql-test/include/check_no_row_lock.inc:
Added auxiliary script which allows to check if statement
reading table doesn't take locks on its rows.
mysql-test/include/check_shared_row_lock.inc:
Added auxiliary script which allows to check if statement
reading table takes shared locks on some of its rows.
mysql-test/r/bug39022.result:
After bug #46947 'Embedded SELECT without FOR UPDATE is
causing a lock' was fixed test case for bug 39022 has to
be adjusted in order to trigger execution path on which
original problem was encountered.
mysql-test/r/innodb_mysql_lock2.result:
Added coverage for handling of locking in various cases when
we read data from InnoDB tables (includes test case for
bug #46947 'Embedded SELECT without FOR UPDATE is causing a
lock').
mysql-test/r/lock_sync.result:
Added coverage for handling of locking in various cases when
we read data from MyISAM tables.
mysql-test/t/bug39022.test:
After bug #46947 'Embedded SELECT without FOR UPDATE is
causing a lock' was fixed test case for bug 39022 has to
be adjusted in order to trigger execution path on which
original problem was encountered.
mysql-test/t/innodb_mysql_lock2.test:
Added coverage for handling of locking in various cases when
we read data from InnoDB tables (includes test case for
bug #46947 'Embedded SELECT without FOR UPDATE is causing a
lock').
mysql-test/t/lock_sync.test:
Added coverage for handling of locking in various cases when
we read data from MyISAM tables.
sql/log_event.cc:
Since LEX::lock_option member was removed we no longer can
rely on its value in Load_log_event::print_query() to
determine that log event correponds to LOAD DATA CONCURRENT
statement (this was not correct in all situations anyway).
A new Load_log_event's member was introduced as a replacement.
It is initialized at event object construction time and
explicitly indicates whether LOAD DATA was concurrent.
sql/log_event.h:
Since LEX::lock_option member was removed we no longer can
rely on its value in Load_log_event::print_query() to
determine that log event correponds to LOAD DATA CONCURRENT
statement (this was not correct in all situations anyway).
A new Load_log_event's member was introduced as a replacement.
It is initialized at event object construction time and
explicitly indicates whether LOAD DATA was concurrent.
sql/sp_head.cc:
sp_head::reset_lex():
Before parsing substatement reset part of parser state
which needs this (e.g. set Yacc_state::m_lock_type to
default value).
sql/sql_acl.cc:
Since LEX::reset_n_backup_query_tables_list() now also
resets LEX::sql_command member (as it became part of
Query_tables_list class) we have to restore it in cases
when while working with proxy Query_table_list we assume
that LEX::sql_command still corresponds to original SQL
command being executed (for example, when we are logging
statement to the binary log while having Query_tables_list
reset and backed up).
sql/sql_base.cc:
Changed read_lock_type_for_table() to return a weak TL_READ
type of lock in cases when we are executing statement which
won't update tables directly and table doesn't belong to
statement's prelocking list and thus can't be used by a
stored function. It is OK to do so since in this case table
won't be used by statement or function call which will be
written to the binary log, so serializability requirements
for it can be relaxed.
One of results from this change is that SELECTs on InnoDB
tables no longer takes shared row locks for tables which
are used in subqueries (i.e. bug #46947 is fixed).
Another result is that for similar SELECTs on MyISAM tables
concurrent inserts are allowed.
In order to implement this change signature of
read_lock_type_for_table() function was changed to take
pointers to Query_tables_list and TABLE_LIST objects.
sql/sql_base.h:
- Function read_lock_type_for_table() now takes pointers
to Query_tables_list and TABLE_LIST elements as its
arguments since to correctly determine lock type it needs
to know what statement is being performed and whether table
element for which lock type to be determined belongs to
prelocking list.
sql/sql_lex.cc:
- Removed LEX::lock_option and st_select_lex::lock_option
members. Places in parser that were using them now use
Yacc_state::m_lock_type instead.
- To emphasize that LEX::sql_command member is used during
process of opening and locking of tables it was moved to
Query_tables_list class. It is now reset by
Query_tables_list::reset_query_tables_list() method.
sql/sql_lex.h:
- Removed st_select_lex::lock_option member as there is no
real need for per-SELECT lock type (HIGH_PRIORITY option
should apply to the whole statement. FOR UPDATE/LOCK IN
SHARE MODE clauses can be handled without this member).
The main effect which was achieved by introduction of this
member, i.e. using TL_READ_DEFAULT lock type for
subqueries, is now achieved by setting LEX::lock_option
(or rather its replacement - Yacc_state::m_lock_type) to
TL_READ_DEFAULT in almost all cases.
- To emphasize that LEX::sql_command member is used during
process of opening and locking of tables it was moved to
Query_tables_list class.
- Replaced LEX::lock_option with Yacc_state::m_lock_type
in order to emphasize that this value is relevant only
during parsing. Unlike for LEX::lock_option the default
value for Yacc_state::m_lock_type is TL_READ_DEFAULT.
Note that for cases when it is OK to take a "weak" read
lock (e.g. simple SELECT) this lock type will be converted
to TL_READ at open_tables() time. So this change won't
cause negative change in behavior for such statements.
OTOH this change ensures that, for example, for SELECTs
which are used in stored functions TL_READ_NO_INSERT lock
is taken when necessary and as result calls to such stored
functions can be written to the binary log with correct
serialization.
sql/sql_load.cc:
Load_log_event constructor now requires a parameter that
indicates whether LOAD DATA is concurrent.
sql/sql_parse.cc:
LEX::lock_option was replaced with Yacc_state::m_lock_type.
And instead of resetting the latter implicitly in
mysql_init_multi_delete() we do it explicitly in the
places in parser which call this function.
sql/sql_priv.h:
- To be able more easily distinguish high-priority SELECTs
in st_select_lex::print() method added flag for
HIGH_PRIORITY option.
sql/sql_select.cc:
Changed code not to rely on LEX::lock_option to determine
that it is high-priority SELECT. It was replaced with
Yacc_state::m_lock_type which is accessible only at
parse time. So instead of LEX::lock_option we now rely
on a newly introduced flag for st_select_lex::options -
SELECT_HIGH_PRIORITY.
sql/sql_show.cc:
Since LEX::reset_n_backup_query_tables_list() now also
resets LEX::sql_command member (as it became part of
Query_tables_list class) we have to restore it in cases
when while working with proxy Query_table_list we assume
that LEX::sql_command still corresponds to original SQL
command being executed.
sql/sql_table.cc:
Since LEX::reset_query_tables_list() now also resets
LEX::sql_command member (as it became part of
Query_tables_list class) we have to restore value of this
member when this method is called by mysql_admin_table(),
to make this code safe for re-execution.
sql/sql_trigger.cc:
Since LEX::reset_n_backup_query_tables_list() now also
resets LEX::sql_command member (as it became part of
Query_tables_list class) we have to restore it in cases
when while working with proxy Query_table_list we assume
that LEX::sql_command still corresponds to original SQL
command being executed (for example, when we are logging
statement to the binary log while having Query_tables_list
reset and backed up).
sql/sql_update.cc:
Function read_lock_type_for_table() now takes pointers
to Query_tables_list and TABLE_LIST elements as its
arguments since to correctly determine lock type it needs
to know what statement is being performed and whether table
element for which lock type to be determined belongs to
prelocking list.
sql/sql_yacc.yy:
- Removed st_select_lex::lock_option member as there is no
real need for per-SELECT lock type (HIGH_PRIORITY option
should apply to the whole statement. FOR UPDATE/LOCK IN
SHARE MODE clauses can be handled without this member).
The main effect which was achieved by introduction of this
member, i.e. using TL_READ_DEFAULT lock type for
subqueries, is now achieved by setting LEX::lock_option
(or rather its replacement - Yacc_state::m_lock_type) to
TL_READ_DEFAULT in almost all cases.
- Replaced LEX::lock_option with Yacc_state::m_lock_type
in order to emphasize that this value is relevant only
during parsing. Unlike for LEX::lock_option the default
value for Yacc_state::m_lock_type is TL_READ_DEFAULT.
Note that for cases when it is OK to take a "weak" read
lock (e.g. simple SELECT) this lock type will be converted
to TL_READ at open_tables() time. So this change won't
cause negative change in behavior for such statements.
OTOH this change ensures that, for example, for SELECTs
which are used in stored functions TL_READ_NO_INSERT lock
is taken when necessary and as result calls to such stored
functions can be written to the binary log with correct
serialization.
- To be able more easily distinguish high-priority SELECTs
in st_select_lex::print() method we now use new flag
in st_select_lex::options bit-field.
Fix for bug #46947 "Embedded SELECT without FOR UPDATE is
causing a lock", with after-review fixes.
SELECT statements with subqueries referencing InnoDB tables
were acquiring shared locks on rows in these tables when they
were executed in REPEATABLE-READ mode and with statement or
mixed mode binary logging turned on.
This was a regression which were introduced when fixing
bug 39843.
The problem was that for tables belonging to subqueries
parser set TL_READ_DEFAULT as a lock type. In cases when
statement/mixed binary logging at open_tables() time this
type of lock was converted to TL_READ_NO_INSERT lock at
open_tables() time and caused InnoDB engine to acquire
shared locks on reads from these tables. Although in some
cases such behavior was correct (e.g. for subqueries in
DELETE) in case of SELECT it has caused unnecessary locking.
This patch tries to solve this problem by rethinking our
approach to how we handle locking for SELECT and subqueries.
Now we always set TL_READ_DEFAULT lock type for all cases
when we read data. When at open_tables() time this lock
is interpreted as TL_READ_NO_INSERT or TL_READ depending
on whether this statement as a whole or call to function
which uses particular table should be written to the
binary log or not (if yes then statement should be properly
serialized with concurrent statements and stronger lock
should be acquired).
Test coverage is added for both InnoDB and MyISAM.
This patch introduces an "incompatible" change in locking
scheme for subqueries used in SELECT ... FOR UPDATE and
SELECT .. IN SHARE MODE.
In 4.1 the server would use a snapshot InnoDB read for
subqueries in SELECT FOR UPDATE and SELECT .. IN SHARE MODE
statements, regardless of whether the binary log is on or off.
If the user required a different type of read (i.e. locking read),
he/she could request so explicitly by providing FOR UPDATE/IN SHARE MODE
clause for each individual subquery.
On of the patches for 5.0 broke this behaviour (which was not documented
or tested), and started to use locking reads fora all subqueries in SELECT ...
FOR UPDATE/IN SHARE MODE. This patch restored 4.1 behaviour.
