The following global status variables where added:
* binlog_group_commit_reason_count
* binlog_group_commit_reason_usec
* binlog_group_commit_reason_transaction
* binlog_group_commit_reason_immediate
binlog_group_commit_reason_count corresponds to group commits made by
virtue of the binlog_commit_wait_count variable.
binlog_group_commit_reason_usec corresponds to the binlog_commit_wait_usec
variable.
binlog_group_commit_reason_transaction is a result of ordered
transaction that need to occur in the same order on the slave and can't
be parallelised.
binlog_group_commit_reason_immediate is caused to prevent stalls with
row locks as described in log.cc:binlog_report_wait_for. This immediate
count is also counted a second time in binlog_group_commit_reason_transaction.
Overall binlog_group_commits = binlog_group_commit_reason_count +
binlog_group_commit_reason_usec + binlog_group_commit_reason_transaction
This work was funded thanks to Open Source Developers Club Australia.
Parallel replication (in 10.0 / "conservative" mode) relies on binlog group
commits to group transactions that can be safely run in parallel on the
slave. The --binlog-commit-wait-count and --binlog-commit-wait-usec options
exist to increase the number of commits per group. But in case of conflicts
between transactions, this can cause unnecessary delay and reduced througput,
especially on a slave where commit order is fixed.
This patch adds a heuristics to reduce this problem. When transaction T1 goes
to commit, it will first wait for N transactions to queue up for a group
commit. However, if we detect that another transaction T2 is waiting for a row
lock held by T1, then we will skip the wait and let T1 commit immediately,
releasing locks and let T2 continue.
On a slave, this avoids the unfortunate situation where T1 is waiting for T2
to join the group commit, but T2 is waiting for T1 to release locks, causing
no work to be done for the duration of the --binlog-commit-wait-usec timeout.
(The heuristic seems reasonable on the master as well, so it is enabled for
all transactions, not just replication transactions).
log-tc-size is 24K by default. Page size is 64K on PPC64. But log-tc-
size
must be at least 3 x page size. This is enforced by TC_LOG_MMAP::open()
with a comment: to guarantee non-empty pool.
This all makes server not startable in default configuration on PPC64.
Autosize log-tc-size, so that it's min value= page size * 3, default
value= page size * 6, block size= page size.
Conflicts:
mysql-test/suite/sys_vars/inc/sysvars_server.inc
mysql-test/suite/sys_vars/r/sysvars_server_notembedded.result
mysql-test/t/mysqld--help.test
sql/mysqld.cc
sql/sys_vars.cc
The problem occurs in parallel replication in GTID mode, when we are using
multiple replication domains. In this case, if the SQL thread stops, the
slave GTID position may refer to a different point in the relay log for each
domain.
The bug was that when the SQL thread was stopped and restarted (but the IO
thread was kept running), the SQL thread would resume applying the relay log
from the point of the most advanced replication domain, silently skipping all
earlier events within other domains. This caused replication corruption.
This patch solves the problem by storing, when the SQL thread stops with
multiple parallel replication domains active, the current GTID
position. Additionally, the current position in the relay logs is moved back
to a point known to be earlier than the current position of any replication
domain. Then when the SQL thread restarts from the earlier position, GTIDs
encountered are compared against the stored GTID position. Any GTID that was
already applied before the stop is skipped to avoid duplicate apply.
This patch should have no effect if multi-domain GTID parallel replication is
not used. Similarly, if both SQL and IO thread are stopped and restarted, the
patch has no effect, as in this case the existing relay logs are removed and
re-fetched from the master at the current global @@gtid_slave_pos.
When the server starts up, check if the master-bin.state file was lost.
If it was, recover its contents by scanning the last binlog file, thus
avoiding running with a corrupt binlog state.
When the binlog was rotated due to @@max_binlog_size, the values of the
binlog_shapshot_file and binlog_snapshot_position were inconsistent in case of
non-transactional DML. The position was refering to the old file, while the
filename was of the new file after rotation. This patch makes them consistent
by making sure the position is also refering to the new file.
Using a boolean flag for 'there is a RESET MASTER in progress' doesn't
work very well for multiple concurrent RESET MASTER statements.
Changed to a counter.
The problem was caused by a merge error (incorrect conflict resolution) when
the MDEV-7257 patch was merged into 10.1.
The incorrect merge put two code blocks in the wrong order. This caused a race
that was seen as sporadic test failures.
(The problem was that binlog end position was updated before running
after_flush hook; this way it was possible for the binlog dump thread to send
a transaction to a slave without requesting semi-sync acknowledgement. Then
when no acknowledgement was received, semisync replication would be disabled
on the master.)
log-tc-size is 24K by default. Page size is 64K on PPC64. But log-tc-size
must be at least 3 x page size. This is enforced by TC_LOG_MMAP::open()
with a comment: to guarantee non-empty pool.
This all makes server not startable in default configuration on PPC64.
Autosize log-tc-size, so that it's min value= page size * 3, default
value= page size * 6, block size= page size.
Implement --semi-sync-master-wait-point=AFTER_SYNC|AFTER_COMMIT.
When AFTER_SYNC, the semi-sync wait will be done earlier, before the storage
engine commit rather than after. This means that a transaction will not be
visible on the master until at least one slave has received it.
Make the binlog dump threads not need to take LOCK_log while sending
binlog events to slave. Instead, a new LOCK_binlog_end_pos is used
just to coordinate tracking the current end-of-log.
This is a pre-requisite for MDEV-162, "Enhanced semisync
replication". It should also help reduce the contention on LOCK_log on
a busy master.
Also does some much-needed refactoring/cleanup of the related code in
the binlog dump thread.
The real problem here was inconsistent handling of entry->commit_errno in
MYSQL_BIN_LOG::write_transaction_or_stmt(). Some return paths were setting it
to the value of errno, some where not. And the setting was redundant anyway,
as it is set consistently by the caller.
Fix by consistently setting it in the caller, and not in each return path in
the function.
The test failure happened because a DBUG_EXECUTE_IF() used in the test case
set an entry->commit_errno that was immediately overwritten in the caller with
whatever happened to be the value of errno. This could lead to different error
message in the .result file.
The code in binlog group commit around wait_for_commit that controls commit
order, did the wakeup of subsequent commits early, as soon as a following
transaction is put into the group commit queue, but before any such commit has
actually taken place. This causes problems with too early wakeup of
transactions that need to wait for prior to commit, but do not take part in
the binlog group commit for one reason or the other.
This patch solves the problem, by moving the wakeup to happen only after the
binlog group commit is completed.
This requires a new solution to ensure that transactions that arrive later
than the leader are still able to participate in group commit. This patch
introduces a flag wait_for_commit::commit_started. When this is set, a waiter
can queue up itself in the group commit queue.
This way, effectively the wait_for_prior_commit() is skipped only for
transactions that participate in group commit, so that skipping the wait is
safe. Other transactions still wait as needed for correctness.
In parallel replication, the wait_for_commit facility is used to ensure that
events are written into the binlog in the correct order. This is handled in an
optimised way in the binlogging group commit code.
However, some statements, for example GRANT, are written directly into the
binlog, outside of the group commit code. There was a bug that this direct
write does not correctly wait for the prior transactions to have been written
first, which allows f.ex. GRANT to be written ahead of earlier transactions.
This patch adds the missing wait_for_prior_commit() before writing directly to
the binlog.
However, the problem is still there, although the race is much less likely to
occur now. The problem is that the optimised group commit code does wakeup of
following transactions early, before the binlog write is actually done. A
woken-up following transaction is then allowed to run ahead and queue up for
the group commit, which will ensure that binlog write happens in correct order
in the end. However, the code for directly written events currently bypass
this mechanism, so they get woken up and written too early.
This will be fixed properly in a later patch.
The reason for the failure was a bug in an include file on debian that causes 'struct stat'
to have different sized depending on the environment.
This patch fixes so that we always include my_global.h or my_config.h before we include any other files.
Other things:
- Removed #include <my_global.h> in some include files; Better to always do this at the top level to have as few
"always-include-this-file-first' files as possible.
- Removed usage of some include files that where already included by my_global.h or by other files.
client/mysql_plugin.c:
Use my_global.h first
client/mysqlslap.c:
Remove duplicated include files
extra/comp_err.c:
Remove duplicated include files
include/m_string.h:
Remove duplicated include files
include/maria.h:
Remove duplicated include files
libmysqld/emb_qcache.cc:
Use my_global.h first
plugin/semisync/semisync.h:
Use my_pthread.h first
sql/datadict.cc:
Use my_global.h first
sql/debug_sync.cc:
Use my_global.h first
sql/derror.cc:
Use my_global.h first
sql/des_key_file.cc:
Use my_global.h first
sql/discover.cc:
Use my_global.h first
sql/event_data_objects.cc:
Use my_global.h first
sql/event_db_repository.cc:
Use my_global.h first
sql/event_parse_data.cc:
Use my_global.h first
sql/event_queue.cc:
Use my_global.h first
sql/event_scheduler.cc:
Use my_global.h first
sql/events.cc:
Use my_global.h first
sql/field.cc:
Use my_global.h first
Remove duplicated include files
sql/field_conv.cc:
Use my_global.h first
sql/filesort.cc:
Use my_global.h first
Remove duplicated include files
sql/gstream.cc:
Use my_global.h first
sql/ha_ndbcluster.cc:
Use my_global.h first
sql/ha_ndbcluster_binlog.cc:
Use my_global.h first
sql/ha_ndbcluster_cond.cc:
Use my_global.h first
sql/ha_partition.cc:
Use my_global.h first
sql/handler.cc:
Use my_global.h first
sql/hash_filo.cc:
Use my_global.h first
sql/hostname.cc:
Use my_global.h first
sql/init.cc:
Use my_global.h first
sql/item.cc:
Use my_global.h first
sql/item_buff.cc:
Use my_global.h first
sql/item_cmpfunc.cc:
Use my_global.h first
sql/item_create.cc:
Use my_global.h first
sql/item_geofunc.cc:
Use my_global.h first
sql/item_inetfunc.cc:
Use my_global.h first
sql/item_row.cc:
Use my_global.h first
sql/item_strfunc.cc:
Use my_global.h first
sql/item_subselect.cc:
Use my_global.h first
sql/item_sum.cc:
Use my_global.h first
sql/item_timefunc.cc:
Use my_global.h first
sql/item_xmlfunc.cc:
Use my_global.h first
sql/key.cc:
Use my_global.h first
sql/lock.cc:
Use my_global.h first
sql/log.cc:
Use my_global.h first
sql/log_event.cc:
Use my_global.h first
sql/log_event_old.cc:
Use my_global.h first
sql/mf_iocache.cc:
Use my_global.h first
sql/mysql_install_db.cc:
Remove duplicated include files
sql/mysqld.cc:
Remove duplicated include files
sql/net_serv.cc:
Remove duplicated include files
sql/opt_range.cc:
Use my_global.h first
sql/opt_subselect.cc:
Use my_global.h first
sql/opt_sum.cc:
Use my_global.h first
sql/parse_file.cc:
Use my_global.h first
sql/partition_info.cc:
Use my_global.h first
sql/procedure.cc:
Use my_global.h first
sql/protocol.cc:
Use my_global.h first
sql/records.cc:
Use my_global.h first
sql/records.h:
Don't include my_global.h
Better to do this at the upper level
sql/repl_failsafe.cc:
Use my_global.h first
sql/rpl_filter.cc:
Use my_global.h first
sql/rpl_gtid.cc:
Use my_global.h first
sql/rpl_handler.cc:
Use my_global.h first
sql/rpl_injector.cc:
Use my_global.h first
sql/rpl_record.cc:
Use my_global.h first
sql/rpl_record_old.cc:
Use my_global.h first
sql/rpl_reporting.cc:
Use my_global.h first
sql/rpl_rli.cc:
Use my_global.h first
sql/rpl_tblmap.cc:
Use my_global.h first
sql/rpl_utility.cc:
Use my_global.h first
sql/set_var.cc:
Added comment
sql/slave.cc:
Use my_global.h first
sql/sp.cc:
Use my_global.h first
sql/sp_cache.cc:
Use my_global.h first
sql/sp_head.cc:
Use my_global.h first
sql/sp_pcontext.cc:
Use my_global.h first
sql/sp_rcontext.cc:
Use my_global.h first
sql/spatial.cc:
Use my_global.h first
sql/sql_acl.cc:
Use my_global.h first
sql/sql_admin.cc:
Use my_global.h first
sql/sql_analyse.cc:
Use my_global.h first
sql/sql_audit.cc:
Use my_global.h first
sql/sql_base.cc:
Use my_global.h first
sql/sql_binlog.cc:
Use my_global.h first
sql/sql_bootstrap.cc:
Use my_global.h first
Use my_global.h first
sql/sql_cache.cc:
Use my_global.h first
sql/sql_class.cc:
Use my_global.h first
sql/sql_client.cc:
Use my_global.h first
sql/sql_connect.cc:
Use my_global.h first
sql/sql_crypt.cc:
Use my_global.h first
sql/sql_cursor.cc:
Use my_global.h first
sql/sql_db.cc:
Use my_global.h first
sql/sql_delete.cc:
Use my_global.h first
sql/sql_derived.cc:
Use my_global.h first
sql/sql_do.cc:
Use my_global.h first
sql/sql_error.cc:
Use my_global.h first
sql/sql_explain.cc:
Use my_global.h first
sql/sql_expression_cache.cc:
Use my_global.h first
sql/sql_handler.cc:
Use my_global.h first
sql/sql_help.cc:
Use my_global.h first
sql/sql_insert.cc:
Use my_global.h first
sql/sql_lex.cc:
Use my_global.h first
sql/sql_load.cc:
Use my_global.h first
sql/sql_locale.cc:
Use my_global.h first
sql/sql_manager.cc:
Use my_global.h first
sql/sql_parse.cc:
Use my_global.h first
sql/sql_partition.cc:
Use my_global.h first
sql/sql_plugin.cc:
Added comment
sql/sql_prepare.cc:
Use my_global.h first
sql/sql_priv.h:
Added error if we use this before including my_global.h
This check is here becasue so many files includes sql_priv.h first.
sql/sql_profile.cc:
Use my_global.h first
sql/sql_reload.cc:
Use my_global.h first
sql/sql_rename.cc:
Use my_global.h first
sql/sql_repl.cc:
Use my_global.h first
sql/sql_select.cc:
Use my_global.h first
sql/sql_servers.cc:
Use my_global.h first
sql/sql_show.cc:
Added comment
sql/sql_signal.cc:
Use my_global.h first
sql/sql_statistics.cc:
Use my_global.h first
sql/sql_table.cc:
Use my_global.h first
sql/sql_tablespace.cc:
Use my_global.h first
sql/sql_test.cc:
Use my_global.h first
sql/sql_time.cc:
Use my_global.h first
sql/sql_trigger.cc:
Use my_global.h first
sql/sql_udf.cc:
Use my_global.h first
sql/sql_union.cc:
Use my_global.h first
sql/sql_update.cc:
Use my_global.h first
sql/sql_view.cc:
Use my_global.h first
sql/sys_vars.cc:
Added comment
sql/table.cc:
Use my_global.h first
sql/thr_malloc.cc:
Use my_global.h first
sql/transaction.cc:
Use my_global.h first
sql/uniques.cc:
Use my_global.h first
sql/unireg.cc:
Use my_global.h first
sql/unireg.h:
Removed inclusion of my_global.h
storage/archive/ha_archive.cc:
Added comment
storage/blackhole/ha_blackhole.cc:
Use my_global.h first
storage/csv/ha_tina.cc:
Use my_global.h first
storage/csv/transparent_file.cc:
Use my_global.h first
storage/federated/ha_federated.cc:
Use my_global.h first
storage/federatedx/federatedx_io.cc:
Use my_global.h first
storage/federatedx/federatedx_io_mysql.cc:
Use my_global.h first
storage/federatedx/federatedx_io_null.cc:
Use my_global.h first
storage/federatedx/federatedx_txn.cc:
Use my_global.h first
storage/heap/ha_heap.cc:
Use my_global.h first
storage/innobase/handler/handler0alter.cc:
Use my_global.h first
storage/maria/ha_maria.cc:
Use my_global.h first
storage/maria/unittest/ma_maria_log_cleanup.c:
Remove duplicated include files
storage/maria/unittest/test_file.c:
Added comment
storage/myisam/ha_myisam.cc:
Move sql_plugin.h first as this includes my_global.h
storage/myisammrg/ha_myisammrg.cc:
Use my_global.h first
storage/oqgraph/oqgraph_thunk.cc:
Use my_config.h and my_global.h first
One could not include my_global.h before oqgraph_thunk.h (don't know why)
storage/spider/ha_spider.cc:
Use my_global.h first
storage/spider/hs_client/config.cpp:
Use my_global.h first
storage/spider/hs_client/escape.cpp:
Use my_global.h first
storage/spider/hs_client/fatal.cpp:
Use my_global.h first
storage/spider/hs_client/hstcpcli.cpp:
Use my_global.h first
storage/spider/hs_client/socket.cpp:
Use my_global.h first
storage/spider/hs_client/string_util.cpp:
Use my_global.h first
storage/spider/spd_conn.cc:
Use my_global.h first
storage/spider/spd_copy_tables.cc:
Use my_global.h first
storage/spider/spd_db_conn.cc:
Use my_global.h first
storage/spider/spd_db_handlersocket.cc:
Use my_global.h first
storage/spider/spd_db_mysql.cc:
Use my_global.h first
storage/spider/spd_db_oracle.cc:
Use my_global.h first
storage/spider/spd_direct_sql.cc:
Use my_global.h first
storage/spider/spd_i_s.cc:
Use my_global.h first
storage/spider/spd_malloc.cc:
Use my_global.h first
storage/spider/spd_param.cc:
Use my_global.h first
storage/spider/spd_ping_table.cc:
Use my_global.h first
storage/spider/spd_sys_table.cc:
Use my_global.h first
storage/spider/spd_table.cc:
Use my_global.h first
storage/spider/spd_trx.cc:
Use my_global.h first
storage/xtradb/handler/handler0alter.cc:
Use my_global.h first
storage/xtradb/handler/i_s.cc:
Use my_global.h first
This was missing in my last commit for fixing possible lockups in SHOW STATUS.
sql/log.cc:
Fixed comment
sql/sql_show.cc:
Use LOCK_show_status when we add things to all_status_vars
sql/sql_test.cc:
Remove not needed mutex_lock
If the slave gets a reconnect in the middle of a GTID event group, normally
it will re-fetch that event group, skipping the first part that was already
queued for the SQL thread.
However, if the master crashed while writing the event group, the group is
incomplete. This patch detects this case and makes sure that the
transaction is rolled back and nothing is skipped from any following
event groups.
Similarly, a network proxy might cause the reconnect to end up on a
different master server. Detect this by noticing a different server_id,
and similarly in this case roll back the partially received group.
Merged lp:maria/maria-10.0-galera up to revision 3880.
Added a new functions to handler API to forcefully abort_transaction,
producing fake_trx_id, get_checkpoint and set_checkpoint for XA. These
were added for future possiblity to add more storage engines that
could use galera replication.
Merged lp:maria/maria-10.0-galera up to revision 3879.
Added a new functions to handler API to forcefully abort_transaction,
producing fake_trx_id, get_checkpoint and set_checkpoint for XA. These
were added for future possiblity to add more storage engines that
could use galera replication.
mysqldump:
- Added --log-queries to allow one to disable logging for the dump
sql/log_event.cc:
- Removed setting of enable_slow_log as it's not required anymore.
sql/sql_parse.cc:
- Set enable_slow_log to value of thd->variables.sql_log_slow as this will speed up tests if slow log is disabled.
- opt_log_slow_admin_statements can now only disable slow log, not enable it.
sql/sql_explain.cc:
- Minor cleanup
Other things:
- Added sql_log_slow to system variables.
- Changed opt_slow_log to global_system_variables.sql_log_slow in all files
- Updated tests to reflect changes
bzr merge -r4264 maria/5.5
Text conflict in sql/mysqld.cc
Text conflict in storage/xtradb/btr/btr0cur.c
Text conflict in storage/xtradb/buf/buf0buf.c
Text conflict in storage/xtradb/buf/buf0lru.c
Text conflict in storage/xtradb/handler/ha_innodb.cc
5 conflicts encountered.
GOES AWAY, MYSQL QUITS WORKING.
Analysis:
-----------------
Issue in this bug and in bug 11907705 is, the socket file or
fifo file is set for general log at command line while starting
the server. But currently, only regular file can be set for the
general log. Instead of reporting any error, the provided files
are opened for writing and continued. Because of this issues
mentioned in the bug reports are seen.
As mentioned, only when any non-regular file is set for general
log at command line while starting the server, these issues are
seen. If general log file is set to non-regular file from CLI
using system variable general_log_file then error is reported.
These issues can also be faced with slow query log file, if it is
set to non-regular file.
Fix:
-----------------
Currently while starting the server if we fail to open log file
then we report an error, disable logging to file and continue.
To fix issue reported code is modified to check whether file
is regular file or not before opening it. If file is not a
regular file then error is logged to error log and logging to
file is disabled.
