two tests still fail:
main.innodb_icp and main.range_vs_index_merge_innodb
call records_in_range() with both range ends being open
(which triggers an assert)
PROBLEM:
Threads end-up in deadlock due to locks acquired as described
below,
con1: Run Query on a table.
It is important that this SELECT must back-off while
trying to open the t1 and enter into wait_for_condition().
The SELECT then is blocked trying to lock mysys_var->mutex
which is held by con3. The very significant fact here is
that mysys_var->current_mutex will still point to LOCK_open,
even if LOCK_open is no longer held by con1 at this point.
con2: Try dropping table used in con1 or query some table.
It will hold LOCK_open and be blocked trying to lock
kernel_mutex held by con4.
con3: Try killing the query run by con1.
It will hold THD::LOCK_thd_data belonging to con1 while
trying to lock mysys_var->current_mutex belonging to con1.
But current_mutex will point to LOCK_open which is held
by con2.
con4: Get innodb engine status
It will hold kernel_mutex, trying to lock THD::LOCK_thd_data
belonging to con1 which is held by con3.
So while technically only con2, con3 and con4 participate in the
deadlock, con1's mysys_var->current_mutex pointing to LOCK_open
is a vital component of the deadlock.
CYCLE = (THD::LOCK_thd_data -> LOCK_open ->
kernel_mutex -> THD::LOCK_thd_data)
FIX:
LOCK_thd_data has responsibility of protecting,
1) thd->query, thd->query_length
2) VIO
3) thd->mysys_var (used by KILL statement and shutdown)
4) THD during thread delete.
Among above responsibilities, 1), 2)and (3,4) seems to be three
independent group of responsibility. If there is different LOCK
owning responsibility of (3,4), the above mentioned deadlock cycle
can be avoid. This fix introduces LOCK_thd_kill to handle
responsibility (3,4), which eliminates the deadlock issue.
Note: The problem is not found in 5.5. Introduction MDL subsystem
caused metadata locking responsibility to be moved from TDC/TC to
MDL subsystem. Due to this, responsibility of LOCK_open is reduced.
As the use of LOCK_open is removed in open_table() and
mysql_rm_table() the above mentioned CYCLE does not form.
Revision ID for changes,
open_table() = dlenev@mysql.com-20100727133458-m3ua9oslnx8fbbvz
mysql_rm_table() = jon.hauglid@oracle.com-20101116100012-kxep9txz2fxy3nmw
BUG#11761686 insert_id event is not filtered.
Two issues are covered.
INSERT into autoincrement field which is not the first part in the composed primary key
is unsafe by autoincrement logging design. The case is specific to MyISAM engine
because Innodb does not allow such table definition.
However no warnings and row-format logging in the MIXED mode was done, and
that is fixed.
Int-, Rand-, User-var log-events were not filtered along with their parent
query that made possible them to screw up execution context of the following
query.
Fixed with deferring their execution until the parent query.
******
Bug#11754117
Post review fixes.
mysql-test/suite/rpl/r/rpl_auto_increment_bug45679.result:
a new result file is added.
mysql-test/suite/rpl/r/rpl_filter_tables_not_exist.result:
results updated.
mysql-test/suite/rpl/t/rpl_auto_increment_bug45679.test:
regression test for BUG#11754117-45670 is added.
mysql-test/suite/rpl/t/rpl_filter_tables_not_exist.test:
regression test for filtering issue of BUG#11754117 - 45670 is added.
sql/log_event.cc:
Logics are added for deferring and executing events associated
with the Query event.
sql/log_event.h:
Interface to deferred events batch execution is added.
sql/rpl_rli.cc:
initialization for new RLI members is added.
sql/rpl_rli.h:
New members to RLI are added to facilitate deferred events gathering
and execution control;
two general character RLI cleanup methods are constructed.
sql/rpl_utility.cc:
Deferred_log_events methods are difined.
sql/rpl_utility.h:
A new class Deferred_log_events is defined to implement
IRU events gathering, execution and cleanup.
sql/slave.cc:
Necessary changes to initialize `rli->deferred_events' and prevent
deferred event deletion in the main read-exec branch.
sql/sql_base.cc:
A new safe-check function for multi-part pk with auto-increment is defined
and deployed in lock_tables().
sql/sql_class.cc:
Initialization for a new member and replication cleanups are added
to THD class.
sql/sql_class.h:
THD class receives a new member to hold a specific execution
context for slave applier.
sql/sql_parse.cc:
Execution of the deferred event in started prior to its parent query.
Currently SHOW MASTER LOGS and SHOW BINARY LOGS require the SUPER
privilege. Monitoring tools (such as MEM) often want to check this
output - for instance MEM generates the SUM of the sizes of the logs
reported here, and puts that in the Replication overview within the MEM
Dashboard.
However, because of the SUPER requirement, these tools often have an
account that holds open the connection whilst monitoring, and can lock
out administrators when the server gets overloaded and reaches
max_connections - there is already another SUPER privileged account
connected, the "monitor".
As SHOW MASTER STATUS, and all other replication related statements,
return with either REPLICATION CLIENT or SUPER privileges, this worklog
is to make SHOW MASTER LOGS and SHOW BINARY LOGS be consistent with this
as well, and allow both of these commands with either SUPER or
REPLICATION CLIENT.
This allows monitoring tools to not require a SUPER privilege any more,
so is safer in overloaded situations, as well as being more secure, as
lighter privileges can be given to users of such tools or scripts.
If a query's end time is before before its start time, the system clock has been turn back
(daylight savings time etc.). When the system clock is changed, we can't tell for certain a
given query was actually slow. We did not protect against logging such a query with a bogus
execution time (resulting from end_time - start_time being negative), and possibly logging it
even though it did not really take long to run.
We now have a sanity check in place.
sql/sql_parse.cc:
Make sure end time is not before start time - otherwise, we can be SURE the system clock
was changed in between, but not by how much. In other words, when the clock is changed,
we don't know how long a query ran, and whether it was slow.
The code was accessing a pointer in a mem_root that might be freed by
another concurrent thread. Fix by moving the access to be done while the
LOCK_thd_data is held, preventing the memory from being freed too early.
- Changed storage to be 2 bytes instead of sizeof(size_t) (simple optimization)
- Fixed bug when using query_cache_strip_comments and query that started with '('
- Fixed DBUG_PRINT() that used wrong (not initialized) variables.
mysql-test/mysql-test-run.pl:
Added some space to make output more readable.
mysql-test/r/query_cache.result:
Updated test results
mysql-test/t/query_cache.test:
Added test with query_cache_strip_comments
sql/mysql_priv.h:
Added QUERY_CACHE_DB_LENGTH_SIZE
sql/sql_cache.cc:
Fixed bug when using query_cache_strip_comments and query that started with '('
Store db length in 2 characters instead of size_t.
Get db length from correct position (earlier we had an error when query started with ' ')
Fixed DBUG_PRINT() that used wrong (not initialized) variables.
The problem was that merged views has its own nest_level numbering =>
when we compare nest levels we should take into considiration basis (i.e. 0 level),
if it is different then nest levels are not comparable.
A buffer large enough to hold the query _plus_ some additional
data is allocated before parsing is started. The additional data
is used by the query cache, and consists of the name of the current
database and a set of flags.
When a packet containing multiple SQL statements is sent to the
server and one of the statements changes the current database
(a "USE <db>" statement), and the name of the new current database
is longer than of the previous, there is not enough space in the
buffer for the new name, and we write out over the buffer boundary.
The fix adds an extra field to store the number of bytes
allocated to the database name in the buffer. If the current
database name changes, and the new name is longer than the
previous one, we refuse to cache the query.
Cleanup: Changed procedure type from a int/char to an enum for easier to manage and debug code.
mysql-test/r/trigger.result:
Test that mysql.proc is not used as part of creating or using a trigger.
mysql-test/t/trigger.test:
Test that mysql.proc is not used as part of creating or using a trigger.
sql/sp.cc:
The main bug fix is to not look up triggers in mysql.proc; This is done by ignoreing type == TYPE_ENUM_TRIGGER in sp_add_used_routine()
Cleanup: Changed procedure type from a int/char to an enum.
sql/sp.h:
Cleanup: Changed procedure type from a int/char to an enum.
sql/sp_head.h:
Cleanup: Changed procedure type from a int/char to an enum.
sql/sql_db.cc:
Fix include order
sql/sql_lex.cc:
Fix include order
sql/sql_parse.cc:
Cleanup: Changed procedure type from a int/char to an enum.
sql/sql_show.cc:
Fix include order
sql/sql_view.cc:
Fix include order
- If USER is given, all threads for that user is signaled
- If SOFT is used then the KILL will not be sent to the handler. This can be used to not interrupt critical things in the handler like 'REPAIR'.
Internally added more kill signals. This gives us more information of why a query/connection was killed.
- KILL_SERVER is used when server is going down. In this case the users gets ER_SHUTDOWN as the reason connection was killed.
- Changed signals to number in correct order, which makes it easier to test how the signal should affect the code.
- New error message ER_CONNECTION_KILLED if connection was killed by 'KILL CONNECTION'. Before we got error ER_SHUTDOWN.
Changed names of not used parameters KILL_QUERY & KILL_CONNCTION to mysql_kill() to not conflict with defines in the server
include/mysql.h.pp:
Updated file
include/mysql_com.h:
Changed names of not used parameters KILL_QUERY & KILL_CONNCTION to mysql_kill() to not conflict with defines in the server
mysql-test/r/kill.result:
Added test of KILL USER
mysql-test/suite/rpl/r/rpl_stm_000001.result:
Updated error code
mysql-test/suite/rpl/t/rpl_stm_000001.test:
Updated error codes
mysql-test/t/flush_read_lock_kill.test:
Updated error codes
mysql-test/t/kill.test:
Added test of KILL USER
plugin/handler_socket/handlersocket/database.cpp:
Removed THD:: from KILL
sql/debug_sync.cc:
Removed THD:: from KILL
sql/event_scheduler.cc:
Removed THD:: from KILL
sql/filesort.cc:
Removed THD:: from KILL
sql/ha_ndbcluster_binlog.cc:
Removed THD:: from KILL
sql/handler.cc:
Removed THD:: from KILL
Simplify code.
sql/lex.h:
Added new keywords HARD | SOFT
sql/log.cc:
Removed THD:: from KILL
Added testing of new error ER_CONNECTION_KILLED
sql/log_event.cc:
Removed THD:: from KILL
Added testing of new error ER_CONNECTION_KILLED
sql/mysql_priv.h:
Added new prototypes
sql/mysqld.cc:
Removed THD:: from KILL
Use KILL_SERVER_HARD signal on shutdown.
sql/scheduler.cc:
Removed THD:: from KILL
Simplify test if connection should be killed
sql/share/errmsg.txt:
New error message ER_CONNECTION_KILLED
sql/slave.cc:
Removed THD:: from KILL
sql/sp_head.cc:
Removed THD:: from KILL
sql/sql_base.cc:
Removed THD:: from KILL
sql/sql_cache.cc:
Removed THD:: from KILL
sql/sql_class.cc:
Removed THD:: from KILL
Added killed_errno()
Only signal kill to storage engine if HARD bit is set.
sql/sql_class.h:
Move KILL options out from THD to make them easier to use in sql_yacc.yy
sql/sql_connect.cc:
Removed THD:: from KILL
sql/sql_delete.cc:
Removed THD:: from KILL
sql/sql_error.cc:
Removed THD:: from KILL
sql/sql_insert.cc:
Removed THD:: from KILL
Simplifed testing if thread is killed.
sql/sql_lex.h:
Added kill options to st_lex
sql/sql_load.cc:
Removed THD:: from KILL
sql/sql_parse.cc:
Added kill options to st_lex
Simplifed and optimzed testing of thd->killed at end of query
Added support for KILL USER
Extended sql_kill() to allow use of more kill signals.
sql/sql_repl.cc:
Removed THD:: from KILL
sql/sql_show.cc:
Removed THD:: from KILL
Simplied testing if query/connection was killed
sql/sql_table.cc:
Removed THD:: from KILL
sql/sql_update.cc:
Removed THD:: from KILL
sql/sql_yacc.yy:
Added support for new KILL syntax: KILL [HARD|SOFT] [CONNECTION|QUERY] [ID | USER user_name]
storage/archive/ha_archive.cc:
Simplify compilation
storage/maria/ha_maria.cc:
Removed THD:: from KILL
The main problem was that lex_start() was forgotten to be called before processing
COM_REFRESH.
Another problem discovered was that if failures to flush the error log were not properly
handled, which resulted in the server crash.
The user-visible effect of these problems were:
- if COM_REFRESH command was sent after SQL-queries of some sort,
the server would crash.
- if COM_REFRESH was requested with REFRESH_LOG only, and the error log
failed to flush, the server would crash. The error log fails to flush
when it points to unavailable file (for example, due to restricted
permissions).
The fixes are:
- call lex_start() in the beginning of COM_REFRESH;
- handle failures to flush the error log properly, i.e. raise ER_UNKNOWN_ERROR.
sql/sql_parse.cc:
Fix for Bug#13001491: MYSQL_REFRESH CRASHES WHEN STORED ROUTINES ARE RUN CONCURRENTLY.
tests/mysql_client_test.c:
A test case for Bug#13001491: MYSQL_REFRESH CRASHES WHEN STORED ROUTINES
ARE RUN CONCURRENTLY.
Give more information when finding an error in a MyISAM table.
When killing system thread, use KILL_SYSTEM_THREAD instead of KILL_CONNECTION to make it easier to ignore the signal in sensitive context (like auto-repair)
Added new kill level: KILL_SERVER that will in the future to be used to signal killed by shutdown.
Add more warnings about killed connections when warning level > 3
include/myisamchk.h:
Added counting of printed info/notes
mysys/mf_iocache.c:
Remove duplicate assignment
sql/handler.cc:
Added test of KILL_SERVER
sql/log.cc:
Ignore new 'kill' error ER_NEW_ABORTING_CONNECTION when requesting query error code.
sql/mysqld.cc:
Add more warnings for killed connections when warning level > 3
sql/scheduler.cc:
Added checks for new kill signals
sql/slave.cc:
Ignore new kill signal ER_NEW_ABORTING_CONNECTION
sql/sp_head.cc:
Fixed assignment to bool
Added testing of new kill signals
sql/sql_base.cc:
Use KILL_SYSTEM_THREAD to auto-kill system threads
sql/sql_class.cc:
Add more warnings for killed connections when warning level > 3
thd_killed() now ignores KILL_BAD_DATA and THD::KILL_SYSTEM_THREAD as these should not abort sensitive operations.
sql/sql_class.h:
Added KILL_SYSTEM_THREAD and KILL_SERVER
sql/sql_connect.cc:
Added handling of KILL_SERVER
sql/sql_insert.cc:
Use KILL_SYSTEM_THREAD to auto-kill system threads
Added handling of KILL_SERVER
sql/sql_parse.cc:
Add more warnings for killed connections when warning level > 3
Added checking that thd->abort_on_warning is reset at end of query.
sql/sql_show.cc:
Update condition for when a query is 'killed'
storage/myisam/ha_myisam.cc:
Added counting of info/notes printed
storage/myisam/mi_check.c:
Always print an an error if we find data errors when checking/repairing a MyISAM table.
When a repair was killed, don't retry repair.
Added assert if sort_get_next_record() returned an error without an error message.
Removed nonsence check "if (sort_param->read_cache.error < 0)" in repair.
storage/myisam/myisamchk.c:
Added counting of notes printed
storage/pbxt/src/thread_xt.cc:
Better error message.
- The problem was that the code that made the check whether the subquery is an AND-part of the WHERE
clause didn't work correctly for nested subqueries. In particular, grand-child subquery in HAVING was
treated as if it was in the WHERE, which eventually caused an assert when replace_where_subcondition
looked for the subquery predicate in the WHERE and couldn't find it there.
- The fix: Removed implementation of "thd_marker approach". thd->thd_marker was used to determine the
location of subquery predicate: setup_conds() would set accordingly it when making the
{where|on_expr}->fix_fields(...)
call so that AND-parts of the WHERE/ON clauses can determine they are the AND-parts.
Item_cond_or::fix_fields(), Item_func::fix_fields(), Item_subselect::fix_fields (this one was missed),
and all other items-that-contain-items had to reset thd->thd_marker before calling fix_fields() for
their children items, so that the children can see they are not AND-parts of WHERE/ON.
- The "thd_marker approach" required that a lot of code in different locations maintains correct value of
thd->thd_marker, so it was replaced with:
- The new approach with mark_as_condition_AND_part does not keep context in thd->thd_marker. Instead,
setup_conds() now calls
{where|on_expr}->mark_as_condition_AND_part()
and implementations of that function make sure that:
- parts of AND-expressions get the mark_as_condition_AND_part() call
- Item_in_subselect objects record that they are AND-parts of WHERE/ON
thd->user_connect is now handled in thd->clenup() which will ensure that it works in all context (including slaves).
I added also some DBUG_ASSERT() to ensure that things are working correctly.
sql/sql_acl.cc:
Reset thd->user_connect on failed check_for_max_user_connections() to ensure we don't decrement value twice.
Removed not needed call to decrease_user_connections() as thd->cleanup() will now do it.
sql/sql_class.cc:
Call decrease_user_connections() in thd->cleanup()
sql/sql_connect.cc:
Ensure we don't allocate thd->user_connect twice.
Simplify check_for_max_user_connections().
sql/sql_parse.cc:
Ensure that thd->user_connect is handled properly in for 'change_user' command.
There are 2 volatile condition constructions AND/OR constructions and fields(references) when first
good supported to be top elements of conditions because it is normal practice
(see copy_andor_structure for example) fields without any expression in the condition is really rare
and mostly useless case however it could lead to problems when optimiser changes/moves them unaware
of other variables referring to them. An easy solution of this problem is just to replace single field
in a condition with equivalent expression well supported by the server (<field> -> <field> != 0).
mysql-test/r/view.result:
New test added.
mysql-test/t/view.test:
New test added.
sql/sql_parse.cc:
<field> -> <field> != 0
sql/sql_yacc.yy:
<field> -> <field> != 0
When CREATE TABLE wasn't given ENGINE=... it would determine
the default ENGINE at parse-time rather than at execution
time, leading to incorrect behaviour (namely, later changes
to the default engine being ignore) when calling CREATE TABLE
from a stored procedure.
We now defer working out the default engine till execution of
CREATE TABLE.
mysql-test/r/sp_trans.result:
results!
mysql-test/t/sp_trans.test:
Show that CREATE TABLE (called from store routine) heeds
any changes after CREATE SP / parse-time. Show that explicitly
requesting an ENGINE still works.
sql/sql_parse.cc:
If no ENGINE=... was given at parse-time, determine default
engine at execution time of CREATE TABLE.
sql/sql_yacc.yy:
If CREATE TABLE is not given ENGINE=..., don't bother
figuring out the default engine during parsing; we'll
do it at execution time instead to be aware of the
latest updates.
- The client gets a progress report message that triggers a callback function if requested with mysql_options(MYSQL_PROGRESS_CALLBACK, function)
- Added Progress field last to 'show processlist'
- Stage, Max_stage and Progress field added to information_schema.progresslist
- The 'mysql' client by defaults enables progress reports when the output is a tty.
- Added progress_report_time time variable to configure how often progress reports is sent to client
Added read only system variable 'in_transaction' which is 1 if we have executed a BEGIN statement.
client/client_priv.h:
Added OPT_REPORT_PROGRESS
client/mysql.cc:
Added option --progress-reports (on by default if not batch mode)
Progress reports is written to stdout for long running commands
include/Makefile.am:
Added mysql/service_progress_report.h
include/myisamchk.h:
Added variables to be able to do progress reporting in Aria and later in MyISAM
include/mysql.h:
Added new mysql_options() parameter: MYSQL_PROGRESS_CALLBACK
include/mysql.h.pp:
Added new mysql_options() parameter: MYSQL_PROGRESS_CALLBACK
include/mysql/plugin.h:
Added functions for reporting progress.
include/mysql/plugin_auth.h.pp:
Added functions for reporting progress.
include/mysql_com.h:
Added CLIENT_PROGRESS mysql_real_connect() flag.
include/sql_common.h:
Added callback function for reporting progress
mysql-test/r/old-mode.result:
Ensure that SHOW PROGRESSLIST doesn't have the Progress column in old mode.
mysql-test/suite/funcs_1/datadict/datadict_priv.inc:
Added new column
mysql-test/suite/funcs_1/datadict/processlist_priv.inc:
Test all new PROCESSLIST columns
mysql-test/suite/funcs_1/r/is_columns_is.result:
Updated results
mysql-test/suite/funcs_1/r/is_columns_is_embedded.result:
Updated results
mysql-test/suite/funcs_1/r/is_columns_mysql_embedded.result:
Updated results
mysql-test/suite/funcs_1/r/is_tables_is_embedded.result:
Updated results
mysql-test/suite/funcs_1/r/processlist_priv_no_prot.result:
Updated results
mysql-test/suite/funcs_1/r/processlist_priv_ps.result:
Updated results
mysql-test/suite/funcs_1/r/processlist_val_no_prot.result:
Updated results
mysql-test/suite/funcs_1/r/processlist_val_ps.result:
Updated results
mysql-test/suite/pbxt/r/pbxt_locking.result:
Updated results
mysql-test/suite/pbxt/r/skip_name_resolve.result:
Updated results
mysql-test/t/old-mode.test:
Ensure that SHOW PROGRESSLIST doesn't have the Progress column in old mode.
plugin/handler_socket/handlersocket/Makefile.am:
Added -lmysqlservices
scripts/mytop.sh:
Made 'State' field width dynamic.
Added 'Progress' to process list display.
sql-common/client.c:
Added handling of progress messages.
Removed check_license() function.
sql/mysql_priv.h:
Added opt_progress_report_time
sql/mysqld.cc:
Added progress_report_time time variable to configure how often progress reports is sent to client
sql/protocol.cc:
Added net_send_progress_packet()
sql/protocol.h:
New prototypes
sql/set_var.cc:
Added variables progress_report_time and in_transaction
sql/sql_acl.cc:
Safety fix: Made client_capabilities ulonglong
sql/sql_class.cc:
Added interface functions for progress reporting
sql/sql_class.h:
Added varibles in THD for progress reporting.
Added CF_REPORT_PROGRESS
sql/sql_load.cc:
Added progress reporting for LOAD DATA INFILE
sql/sql_parse.cc:
Added CF_REPORT_PROGRESS for top level commands for which it's safe to send progress reports to client
sql/sql_show.cc:
Added Progress field last to 'show processlist'
Stage, Max_stage and Progress field added to information_schema.progresslist
sql/sql_table.cc:
Added progress reporting for ALTER TABLE
Added THD as argument to copy_data_between_tables()
storage/maria/ha_maria.cc:
Added progress reporting for check table, repair table, analyze table
Fixed a bug in start_bulk_insert() that caused alter table to always run with all keys enabled.
storage/maria/ma_check.c:
Added progress reporting
Remember old state before starting repair. This removes some warnings from optimize_table if create-with-sort fails.
storage/maria/ma_check_standalone.h:
Added dummy reporting function for standalone Aria programs.
storage/maria/ma_sort.c:
Added progress reporting
storage/maria/maria_chk.c:
Updated version
storage/maria/maria_def.h:
Added new prototypes
tests/mysql_client_test.c:
Added test case for progress reporting
Noted that there was no memory leak, just a lot of used partitioned tables.
Fixed old bug: 'show status' now shows memory usage when compiled with safemalloc.
Added option --flush to mysqlcheck.c to run a 'flush tables' between each check to keep down memory usage.
Changed '--safemalloc' options to mysqld so that one can use --safemalloc and --skip-safemalloc.
Now skip-safemalloc is default (ie, we only do checking of memory overrun during free()) to speed up tests.
client/client_priv.h:
Added OPT_FLUSH_TABLES
client/mysqlcheck.c:
Added option --flush to mysqlcheck.c to run a 'flush tables' between each check to keep down memory usage.
mysql-test/mysql-test-run.pl:
Always run tests with --loose-skip-safemysqld for higher speed
sql/mysqld.cc:
Changed '--safemalloc' options so that one can use --safemalloc and --skip-safemalloc.
Now skip-safemalloc is default (ie, we only do checking of memory overrun during free()) to speed up tests
sql/sql_parse.cc:
Fixed old bug: 'show status' now shows memory usage when compiled with safemalloc.
storage/archive/archive_reader.c:
Changed all malloc() calls to use my_malloc()/my_free()
Added checks of malloc() calls.
storage/archive/ha_archive.cc:
Detect failure if init_archive_reader() and return errno. This fixed assert crash in my_seek().
Changed all malloc() calls to use my_malloc()/my_free()
INSERT/UPDATE/DELETE statement that used a temptable view v1 could lead to
a crash if v1 was defined as a select from a mergeable view v2 that selected
rows from a temptable view v3.
When INSERT/UPDATE/DELETE uses a view that is not updatable then field
translation for the view should be created before the prepare phase.
SYNTAX TRIGGERS IN ANY WAY
Table with triggers which were using deprecated (5.0-only) syntax became
unavailable for any DML and DDL after upgrade to 5.1 version of server.
Attempt to execute any statement on such a table resulted in parsing
error reported. Since this included DROP TRIGGER and DROP TABLE
statements (actually, the latter was allowed but was not functioning
properly for such tables) it was impossible to fix the problem without
manual operations on .TRG and .TRN files in data directory.
The problem was that failure to parse trigger body (due to 5.0-only
syntax) when opening trigger file for a table prevented the table
from being open. This made all operations on the table impossible
(except DROP TABLE which due to peculiarity in its implementation
dropped the table but left trigger files around).
This patch solves this problem by silencing error which occurs when
we parse trigger body during table open. Error message is preserved
for the future use and table is marked as having a broken trigger.
We also try to analyze parse tree to recover trigger name, which
will be needed in order to drop the broken trigger. DML statements
which invoke triggers on the table marked as having broken trigger
are prohibited and emit saved error message. The same happens for
DDL which change triggers except DROP TRIGGER and DROP TABLE which
try their best to do what was requested. Table becomes no longer
marked as having broken trigger when last such trigger is dropped.
mysql-test/r/trigger-compat.result:
Add results for test case for bug#45235
mysql-test/t/trigger-compat.test:
Add test case for bug#45235.
sql/sp_head.cc:
Added protection against MEM_ROOT double restoring to
sp_head::restore_thd_mem_root() method. Since this
method can be sometimes called twice during parsing
of stored routine (the first time during normal flow
of parsing, and the second time when a syntax error
is detected) we need to shortcut execution of the
method to avoid damaging MEM_ROOT by the second
consecutive call to this method.
sql/sql_trigger.cc:
Added error handler Deprecated_trigger_syntax_handler to
catch non-OOM errors during parsing of trigger body.
Added handling of parse errors into method
Table_triggers_list::check_n_load().
sql/sql_trigger.h:
Added new members to handle broken triggers and error messages.
compilation error in mysys/my_getsystime.c fixed
some redundant code removed
sec_to_time, time_to_sec, from_unixtime, unix_timestamp, @@timestamp now
use decimal, not double for numbers with a fractional part.
purge_master_logs_before_date() fixed
many bugs in corner cases fixed
mysys/my_getsystime.c:
compilation failure fixed
sql/sql_parse.cc:
don't cut corners. it backfires.
