Added option to aria_read_log to crash recovery at certain points in the recovery process.
Fixed bug that caused future recovery attempts to fail if we got a crash/got killed during closing of tables at end of recovery process.
mysql-test/mysql-test-run.pl:
Don't abort if 'var' points to stale place; Just remove it.
mysql-test/suite/maria/r/maria.result:
Fixed wrong indentation
mysql-test/t/partition_error.test:
Fixed portability problem with partiton_error.test
storage/maria/ma_close.c:
More DBUG_PRINT info
storage/maria/ma_pagecache.c:
Copy flush_log_callback when writing to page cache. This fixes problem in recovery when switching from mode of file
storage/maria/ma_recovery.c:
Added option to aria_read_log to crash recovery at certain points in the recovery process.
storage/maria/ma_recovery.h:
Added option to aria_read_log to crash recovery at certain points in the recovery process.
storage/maria/maria_chk.c:
Align aria_chk -d output
Don't write warning Aria table '...' is usable but should be fixed if the table was before marked as crashed but now is ok
storage/maria/maria_read_log.c:
Added option to aria_read_log to crash recovery at certain points in the recovery process.
Noted that there was no memory leak, just a lot of used partitioned tables.
Fixed old bug: 'show status' now shows memory usage when compiled with safemalloc.
Added option --flush to mysqlcheck.c to run a 'flush tables' between each check to keep down memory usage.
Changed '--safemalloc' options to mysqld so that one can use --safemalloc and --skip-safemalloc.
Now skip-safemalloc is default (ie, we only do checking of memory overrun during free()) to speed up tests.
client/client_priv.h:
Added OPT_FLUSH_TABLES
client/mysqlcheck.c:
Added option --flush to mysqlcheck.c to run a 'flush tables' between each check to keep down memory usage.
mysql-test/mysql-test-run.pl:
Always run tests with --loose-skip-safemysqld for higher speed
sql/mysqld.cc:
Changed '--safemalloc' options so that one can use --safemalloc and --skip-safemalloc.
Now skip-safemalloc is default (ie, we only do checking of memory overrun during free()) to speed up tests
sql/sql_parse.cc:
Fixed old bug: 'show status' now shows memory usage when compiled with safemalloc.
storage/archive/archive_reader.c:
Changed all malloc() calls to use my_malloc()/my_free()
Added checks of malloc() calls.
storage/archive/ha_archive.cc:
Detect failure if init_archive_reader() and return errno. This fixed assert crash in my_seek().
Changed all malloc() calls to use my_malloc()/my_free()
Issue:
------
New test case mysql_embedded.test was failing on pb2.
Description:
------------
To run this test case executable libmysqld/examples/mysql_embedded is required.
But as per /libmysqld/examples/cmake_install.cmake this executable doesn't get
copied to <install_dir> when mysql is installed at <install_dir>.That is the
reason it was passing in my local branch and failed on pb2 when pushed.
Solution;
---------
Added code in mysql-test-run.pl, which will try to see if this file exists.If
It doesn't exist, test case will be skipped with a skip message. New code in
mysql-test-run.pl looks only for directory libmysqld/examples/mysql_embedded
because this is the only place where this file could/does exist.
mysql-test/mysql-test-run.pl:
Added new variable for mysql_embedded executable.
mysql-test/t/disabled.def:
enabled mysql_embedded.test which was disabled earlier.
mysql-test/t/mysql_embedded.test:
Modified test case to first verify if mysql_embedded executable exists. If
it does not, skip the test.
Safety check that could cause core dump when doing create table with virtual column.
mysql-test/mysql-test-run.pl:
Show also warnings from thr_lock (which starts with just Warning, not Warning:)
mysql-test/r/lock.result:
Added test that showed not relevant warning when using table locks.
mysql-test/t/lock.test:
Added test that showed not relevant warning when using table locks.
mysys/thr_lock.c:
Fixed sorting of locks.
(Old sort code didn't handle case where TL_WRITE_CONCURRENT_INSERT must be sorted before TL_WRITE)
Added more information to check_locks warning output.
Fixed wrong testing of multiple different write locks for same table.
sql/item_cmpfunc.cc:
Safety check that could cause core dump when doing create table with virtual column.
mysql-test/mysql-test-run.pl:
Directories added for mac to lybrary search paths.
plugin/handler_socket/libhsclient/Makefile.am:
Static build of library removed.
Added --result-file option, which will produce var/mtr-results.txt
Output has a simple format:
<tag> : <value> for general info on test run
{
<tag> : <value>
....
} for each test
Output from failed tests are included but may be truncated.
See WL for more details.
The new --secure-file-priv checks dereference any symlinks in the paths and compare the
resolved paths.
Thus the 5.0 test suite must do as the 5.1 and up and avoid using symlinks.
The reason for mtr warning is that collect_mysqld_features() starts mysqld with --datadir=/tmp and this
directory does not exist on Windows.
Fix : instead of passing --datadir=$opt_vardir/tmp in collect_mysqld_features() just use --datadir=.
mysqld does not need a correct directory, just an existing one, as it is started with --help ---verbose -skip-grant-tables.
Make a qualified guess: if $basedir/lib does not exist but $basedir/lib64
does, then the latter is the proper value for $MYSQL_LIBDIR
Tested on the RPMS of 5.5.12.
USING '..' ON WINDOWS
Backport of the fix to 5.0 (to be null-merged to 5.1).
Moved the test into the main test suite.
Made mysql-test-run.pl to not use symlinks for sdtdata as the symlinks
are now properly recognized by secure_file_priv.
Made sure the paths in load_file(), LOAD DATA and SELECT .. INTO OUTFILE
that are checked against secure_file_priv in a correct way similarly to 5.1
by the extended is_secure_file_path() backport before the comparison.
Added an extensive test with all the variants of upper/lower case,
slash/backslash and case sensitivity.
Added few comments to the code.
-fimplicit-termplates must be in CXXFLAGS not in handlersocket_la_CXXFLAGS.
otehrwise automake puts it in the command line too early to override
global -fno-implicit-templates
Produce a pseudo test valgrind_reports.
Reports are generated by each worker, don't want one test for each.
Send message 'VALGREP' if report was found, master thread will pick this up
With this combination, outoput was directed to .trace but not all
parts of MTR was aware of this.
Replace .err with .trace at the earliest possible place
With this combination, outoput was directed to .trace but not all
parts of MTR was aware of this.
Replace .err with .trace at the earliest possible place
Fix for --vs-config applied
Find.pm incorrectly tested an unitialized local variable instead
of the global, corrected.
Find.pm is also wrong in 5.5: uses a non-existent global variable. Fix when
merging up.
Forgot that the main thread would be idle while waiting for tests
Added sub mark_time_idle() so ignore time spent waiting
Also added a new time category 'admin' to take some of 'init'
Added necessary options and variables
Added dbx_arguments() similar to gdb_arguments()
Unlike gdb, cannot use init file but must provide commands and args as
command line argument to dbx
Also simplified debugger behavior to always start with a breakpoint in main()
mysql-test/mysql-test-run.pl:
Set port-open-timeout to 10 to retry binds
sql/mysqld.cc:
Write error number for bind failure. (perror can't do that on windows as errno dosn't contain error code)
mysql-test/mysql-test-run.pl:
Don't set --log-error when running embedded server as we don't want the mysqltest output into mysqld.1.err
sql/mysqld.cc:
Allow one to disable --log-error
- Fixed mysql-test-run failures on window
- Fixed compiler warnings from my last push (sorry about that)
- Fixed that maria_chk --repair --extended works again
- Fixed compiler warnings about using not unitialized data
mysql-test/mysql-test-run.pl:
Better output
mysql-test/suite/parts/inc/partition_check_drop.inc:
Use remove_files_wildcard instead of rm
mysys/safemalloc.c:
Fixed argument to printf
storage/maria/ma_cache.c:
Don't give errors when running maria_chk
storage/maria/ma_dynrec.c:
Don't give errors when running maria_chk
storage/maria/ma_rt_test.c:
Added option --datadir for where to put logs and test data
storage/maria/ma_test1.c:
Added option --datadir for where to put logs and test data
storage/maria/ma_test2.c:
Added option --datadir for where to put logs and test data
storage/maria/maria_chk.c:
If --datadir is used but --logdir is not, set --logdir from --datadir
(this reflects how --help said how things should work)
storage/maria/maria_read_log.c:
Changed short option for 'maria-log-dir-path' from -l to -h to be same as mysqld, maria_chk, ma_test1 etc..
storage/maria/unittest/ma_test_all-t:
Allow one to specify --tmpdir for where to store logs and data
storage/xtradb/buf/buf0buf.c:
Fixed compiler warnings about using not unitialized data
storage/xtradb/row/row0upd.c:
Fixed compiler warnings about using not unitialized data
storage/xtradb/srv/srv0srv.c:
Fixed compiler warnings about using not unitialized data
- Reduced memory usage from safe_mutex.
- Fixed problem with failing tests that could not restart mysqld becasue the port was reserved
- More DBUG information
- Fixed bug where bitmap_set_prefix() wrote over buffer area.
- Initialize n_pages_flushed in xtradb which was used uninitialized.
client/mysqltest.cc:
Reduced memory usage (400K -> 80 for simple test; 400M -> 70M for some other tests)
- Smaller dynamic arrays at start
- Made 'st_connection' significantly smaller by allocation 'mysql' on demand in mysql_init() and storing require_file in a mem_root.
- Fixed that when one does --debug we get information from safemalloc in the trace
(Most of changes are changing &connect->mysql to connect->mysql
libmysql/libmysql.c:
Don't call mysql_thread_end() if my_init() was called outside of mysql_server_init()
This is needed to get information from my_end() into the DBUG log
mysql-test/README:
Fixed wrong comment
mysql-test/mysql-test-run.pl:
Reserv 20 ports / mysql-test-run thread.
(Needed as some tests uses 9 mysqld servers)
mysys/hash.c:
More DBUG information
mysys/my_bitmap.c:
Fixed bug where bitmap_set_prefix() wrote over buffer area.
mysys/safemalloc.c:
More DBUG information
mysys/thr_mutex.c:
Initialize smaller arrays be default.
sql-common/client.c:
More DBUG_PRINT
storage/xtradb/srv/srv0srv.c:
Initialize n_pages_flushed which was used uninitialized.
mysql-test/lib/My/ConfigFactory.pm:
Added test name to error output
mysql-test/mysql-test-run.pl:
Added testname as part of ConfigFactory for better error message
mysql-test/suite/rpl/t/rpl_test_framework.cnf:
Added space after # to ensure that ConfigFactory treat comments as comments
