This allows one to run the test suite even if any of the following
options are changed:
- character-set-server
- collation-server
- join-cache-level
- log-basename
- max-allowed-packet
- optimizer-switch
- query-cache-size and query-cache-type
- skip-name-resolve
- table-definition-cache
- table-open-cache
- Some innodb options
etc
Changes:
- Don't print out the value of system variables as one can't depend on
them to being constants.
- Don't set global variables to 'default' as the default may not
be the same as the test was started with if there was an additional
option file. Instead save original value and reset it at end of test.
- Test that depends on the latin1 character set should include
default_charset.inc or set the character set to latin1
- Test that depends on the original optimizer switch, should include
default_optimizer_switch.inc
- Test that depends on the value of a specific system variable should
set it in the test (like optimizer_use_condition_selectivity)
- Split subselect3.test into subselect3.test and subselect3.inc to
make it easier to set and reset system variables.
- Added .opt files for test that required specfic options that could
be changed by external configuration files.
- Fixed result files in rockdsb & tokudb that had not been updated for
a while.
Commit 536215e32f in MariaDB Server 10.3.1
introduced the compiler flag (not cmake option) DBUG_ASSERT_AS_PRINTF
that converts DBUG_ASSERT in non-debug builds into printouts.
For debug builds, it could be useful to be able to convert DBUG_ASSERT
into a warning or error printout, to allow execution to continue.
This would allow debug builds to be used for reproducing hard failures
that occur with release builds.
my_assert: A Boolean flag (set by default), tied to the new option
debug_assert that is available on debug builds only.
When set, DBUG_ASSERT() will invoke assert(), like it did until now.
When unset, DBUG_ASSERT() will invoke fprintf(stderr, ...)
with the file name, line number and assertion expression.
Problem was that tests select INFORMATION_SCHEMA.PROCESSLIST processes
from user system user and empty state. Thus, there is not clear
state for slave threads.
Changes:
- Added new status variables that store current amount of applier threads
(wsrep_applier_thread_count) and rollbacker threads
(wsrep_rollbacker_thread_count). This will make clear how many slave threads
of certain type there is.
- Added THD state "wsrep applier idle" when applier slave thread is
waiting for work. This makes finding slave/applier threads easier.
- Added force-restart option for mtr to always restart servers between tests
to avoid race on start of the test
- Added wait_condition_with_debug to wait until the passed statement returns
true, or the operation times out. If operation times out, the additional error
statement will be executed
Changes to be committed:
new file: mysql-test/include/force_restart.inc
new file: mysql-test/include/wait_condition_with_debug.inc
modified: mysql-test/mysql-test-run.pl
modified: mysql-test/suite/galera/disabled.def
modified: mysql-test/suite/galera/r/MW-336.result
modified: mysql-test/suite/galera/r/galera_kill_applier.result
modified: mysql-test/suite/galera/r/galera_var_slave_threads.result
new file: mysql-test/suite/galera/t/MW-336.cnf
modified: mysql-test/suite/galera/t/MW-336.test
modified: mysql-test/suite/galera/t/galera_kill_applier.test
modified: mysql-test/suite/galera/t/galera_parallel_autoinc_largetrx.test
modified: mysql-test/suite/galera/t/galera_parallel_autoinc_manytrx.test
modified: mysql-test/suite/galera/t/galera_var_slave_threads.test
modified: mysql-test/suite/wsrep/disabled.def
modified: mysql-test/suite/wsrep/r/variables.result
modified: mysql-test/suite/wsrep/t/variables.test
modified: sql/mysqld.cc
modified: sql/wsrep_mysqld.cc
modified: sql/wsrep_mysqld.h
modified: sql/wsrep_thd.cc
modified: sql/wsrep_var.cc
Starting with the Intel Skylake microarchitecture, the PAUSE
instruction latency is about 140 clock cycles instead of earlier 10.
On AMD processors, the latency could be 10 or 50 clock cycles,
depending on microarchitecture.
Because of this big range of latency, let us scale the loops around
the PAUSE instruction based on timing results at server startup.
my_cpu_relax_multiplier: New variable: How many times to invoke PAUSE
in a loop. Only defined for IA-32 and AMD64.
my_cpu_init(): Determine with RDTSC the time to run 16 PAUSE instructions
in two unrolled loops according, and based on the quicker of the two
runs, initialize my_cpu_relax_multiplier. This form of calibration was
suggested by Mikhail Sinyavin from Intel.
LF_BACKOFF(), ut_delay(): Use my_cpu_relax_multiplier when available.
ut_delay(): Define inline in my_cpu.h.
UT_COMPILER_BARRIER(): Remove. This does not seem to have any effect,
because in our ut_delay() implementation, no computations are being
performed inside the loop. The purpose of UT_COMPILER_BARRIER() was to
prohibit the compiler from reordering computations. It was not
emitting any code.
Server and command line tools now support option --tls_version to specify the
TLS version between client and server. Valid values are TLSv1.0, TLSv1.1, TLSv1.2, TLSv1.3
or a combination of them. E.g.
--tls_version=TLSv1.3
--tls_version=TLSv1.2,TLSv1.3
In case there is a gap between versions, the lowest version will be used:
--tls_version=TLSv1.1,TLSv1.3 -> Only TLSv1.1 will be available.
If the used TLS library doesn't support the specified TLS version, it will use
the default configuration.
Limitations:
SSLv3 is not supported. The default configuration doesn't support TLSv1.0 anymore.
TLSv1.3 protocol currently is only supported by OpenSSL 1.1.0 (client and server) and
GnuTLS 3.6.5 (client only).
Overview of TLS implementations and protocols
Server:
+-----------+-----------------------------------------+
| Library | Supported TLS versions |
+-----------+-----------------------------------------+
| WolfSSL | TLSv1.1, TLSv1,2 |
+-----------+-----------------------------------------+
| OpenSSL | (TLSv1.0), TLSv1.1, TLSv1,2, TLSv1.3 |
+-----------+-----------------------------------------+
| LibreSSL | (TLSv1.0), TLSv1.1, TLSv1,2, TLSv1.3 |
+-----------+-----------------------------------------+
Client (MariaDB Connector/C)
+-----------+-----------------------------------------+
| Library | Supported TLS versions |
+-----------+-----------------------------------------+
| GnuTLS | (TLSv1.0), TLSv1.1, TLSv1.2, TLSv1.3 |
+-----------+-----------------------------------------+
| Schannel | (TLSv1.0), TLSv1.1, TLSv1.2 |
+-----------+-----------------------------------------+
| OpenSSL | (TLSv1.0), TLSv1.1, TLSv1,2, TLSv1.3 |
+-----------+-----------------------------------------+
| LibreSSL | (TLSv1.0), TLSv1.1, TLSv1,2, TLSv1.3 |
+-----------+-----------------------------------------+
- --default-character-set can now be disabled in mysqldump
- --skip-resolve can be be disabled in mysqld
- mysql_client_test now resets global variables it changes
- mtr couldn't handle [mysqldump] in config files (wrong regexp used)
- Add new submodule for WolfSSL
- Build and use wolfssl and wolfcrypt instead of yassl/taocrypt
- Use HAVE_WOLFSSL instead of HAVE_YASSL
- Increase MY_AES_CTX_SIZE, to avoid compile time asserts in my_crypt.cc
(sizeof(EVP_CIPHER_CTX) is larger on WolfSSL)
SHOW STATUS LIKE 'Open_files' was showing 18446744073709551615
my_file_opened used statistic_increment/statistic_decrement,
so one-off errors were normal and expected. But they confused
monitoring tools, so let's move my_file_opened to use atomics.
Originally introduced by e972125f1 to avoid harmless wait for
LOCK_global_system_variables in a newly created thread, which creation was
initiated by system variable update.
At the same time it opens dangerous hole, when system variable update
thread already released LOCK_global_system_variables and ack_receiver
thread haven't yet completed new THD construction. In this case THD
constructor goes completely unprotected.
Since ack_receiver.stop() waits for the thread to go down, we have to
temporarily release LOCK_global_system_variables so that it doesn't
deadlock with ack_receiver.run(). Unfortunately it breaks atomicity
of rpl_semi_sync_master_enabled updates and makes them not serialized.
LOCK_rpl_semi_sync_master_enabled was introduced to workaround the above.
TODO: move ack_receiver start/stop into repl_semisync_master
enable_master/disable_master under LOCK_binlog protection?
Part of MDEV-14984 - regression in connect performance
The MDEV-17262 commit 26432e49d3
was skipped. In Galera 4, the implementation would seem to require
changes to the streaming replication.
In the tests archive.rnd_pos main.profiling, disable_ps_protocol
for SHOW STATUS and SHOW PROFILE commands until MDEV-18974
has been fixed.
The patches features an optional shutdown behavior to hold on until
after all connected slaves have been sent the last binlogged event.
The connected slave is one whose START SLAVE has been acknowledged and
that was not stopped since that though it could be technically
reconnecting in background.
The solution therefore disallows killing the dump thread until is has
found EOF of the latest binlog file. It is up to the shutdown
requester (DBA) to set up a sufficiently large shutdown timeout value
for shudown to wait patiently until lagging behind slaves have been
synchronized. On the other hand if a specific slave needs exclusion
from synchronization the DBA would have to stop it manually which
would terminate its dump thread.
`mysqladmin shutdown' is extended with a `--wait_for_all_slaves' option
which translates to `SHUTDOW WAIT FOR ALL SLAVES' sql query
to enable the feature on the client side.
The patch also performs a small refactoring of the server shutdown
around close_connections() to introduce kill thread phases which
are two as of current.
slave_list was used to provide data for SHOW SLAVE HOSTS and
Slaves_connected status variable.
Introduced binlog_dump_thread_count which is exposed via Slaves_connected
(replaces slave_list.records).
Store Slave_info on THD and access it by iterating server_threads
(replaces slave_list).
Added:
THD::slave_info
binlog_dump_thread_count
show_slave_hosts_callback()
Removed:
slave_list
SLAVE_LIST_CHUNK
SLAVE_ERRMSG_SIZE
slave_list_key()
slave_info_free()
init_slave_list()
end_slave_list()
all_slave_list_mutexes
init_all_slave_list_mutexes()
key_LOCK_slave_list
LOCK_slave_list
Moved:
SLAVE_INFO -> Slave_info
register_slave() -> THD::register_slave()
unregister_slave() -> THD::unregister_slave()
Also removed redundant end_slave() from close_connections(): it is called
again soon afterwards by clean_up().
Pre-requisite for clean MDEV-18450 solution.
