SECONDARY INDEX UPDATES MAKE CONSISTENT READS DO O(N^2) UNDO PAGE
LOOKUPS (honoring kill query while accessing sec_index)
If secondary index is being used for select query evaluation and this
query is operating with consistent read snapshot it might take good time for
secondary index to return back control to mysql as MVCC would kick in.
If user issues "kill query <id>" while query is actively accessing
secondary index it will not be honored as there is no hook to check
for this condition. Added hook for this check.
-----
Parallely secondary index taking too long to evaluate for consistent
read snapshot case is being examined for performance improvement. WL#6540.
SECONDARY INDEX UPDATES MAKE CONSISTENT READS DO O(N^2) UNDO PAGE
LOOKUPS (honoring kill query while accessing sec_index)
If secondary index is being used for select query evaluation and this
query is operating with consistent read snapshot it might take good time for
secondary index to return back control to mysql as MVCC would kick in.
If user issues "kill query <id>" while query is actively accessing
secondary index it will not be honored as there is no hook to check
for this condition. Added hook for this check.
-----
Parallely secondary index taking too long to evaluate for consistent
read snapshot case is being examined for performance improvement. WL#6540.
PRIVILEGES
Description: (user,host) pair from security context is used
privilege checking at the time of granting or
revoking proxy privileges. This creates problem
when server is started with
--skip-name-resolve option because host will not
contain any value. Checks should be dependent on
consistent values regardless the way server is
started. Further, privilege check should use
(priv_user,priv_host) pair rather than values
obtained from inbound connection because
this pair represents the correct account context
obtained from mysql.user table.
CONSISTENT SNAPSHOT OPTION
A transaction is started with a consistent snapshot. After
the transaction is started new indexes are added to the
table. Now when we issue an update statement, the optimizer
chooses an index. When the index scan is being initialized
via ha_innobase::change_active_index(), InnoDB reports
the error code HA_ERR_TABLE_DEF_CHANGED, with message
stating that "insufficient history for index".
This error message is propagated up to the SQL layer. But
the my_error() api is never called. The statement level
diagnostics area is not updated with the correct error
status (it remains in Diagnostics_area::DA_EMPTY).
Hence the following check in the Protocol::end_statement()
fails.
516 case Diagnostics_area::DA_EMPTY:
517 default:
518 DBUG_ASSERT(0);
519 error= send_ok(thd->server_status, 0, 0, 0, NULL);
520 break;
The fix is to backport the fix of bugs 14365043, 11761652
and 11746399.
14365043 PROTOCOL::END_STATEMENT(): ASSERTION `0' FAILED
11761652 HA_RND_INIT() RESULT CODE NOT CHECKED
11746399 RETURN VALUES OF HA_INDEX_INIT() AND INDEX_INIT() IGNORED
rb://1227 approved by guilhem and mattiasj.
-----------
After compiling from source, during make test I got the following error:
test main.loaddata failed with error
CURRENT_TEST: main.loaddata
mysqltest: At line 592: query 'LOAD DATA INFILE 'tmpp.txt' INTO TABLE t1
CHARACTER SET ucs2
(@b) SET a=REVERSE(@b)' failed: 1115: Unknown character set: 'ucs2'
I noticed other tests are skipped because of no ucs2
main.mix2_myisam_ucs2 [ skipped ] Test requires:'
have_ucs2'
Should main.loaddata be skipped if there is no ucs2
How To Repeat:
-------------
Run make test on compiled source that doesn't have ucs2
Suggested fix:
-------------
the failing piece of the test should be moved from mysql-test/t/loaddata.test to
mysql-test/t/ctype_ucs.test.
QUOTING IN REPLICATION
Problem: Misquoting or unquoted identifiers may lead to
incorrect statements to be logged to the binary log.
Fix: we use specialized functions to append quoted identifiers in
the statements generated by the server.
-----------
After compiling from source, during make test I got the following error:
test main.loaddata failed with error
CURRENT_TEST: main.loaddata
mysqltest: At line 592: query 'LOAD DATA INFILE 'tmpp.txt' INTO TABLE t1
CHARACTER SET ucs2
(@b) SET a=REVERSE(@b)' failed: 1115: Unknown character set: 'ucs2'
I noticed other tests are skipped because of no ucs2
main.mix2_myisam_ucs2 [ skipped ] Test requires:'
have_ucs2'
Should main.loaddata be skipped if there is no ucs2
How To Repeat:
-------------
Run make test on compiled source that doesn't have ucs2
Suggested fix:
-------------
the failing piece of the test should be moved from mysql-test/t/loaddata.test to
mysql-test/t/ctype_ucs.test.
-----------
After compiling from source, during make test I got the following error:
test main.loaddata failed with error
CURRENT_TEST: main.loaddata
mysqltest: At line 592: query 'LOAD DATA INFILE 'tmpp.txt' INTO TABLE t1
CHARACTER SET ucs2
(@b) SET a=REVERSE(@b)' failed: 1115: Unknown character set: 'ucs2'
I noticed other tests are skipped because of no ucs2
main.mix2_myisam_ucs2 [ skipped ] Test requires:'
have_ucs2'
Should main.loaddata be skipped if there is no ucs2
How To Repeat:
-------------
Run make test on compiled source that doesn't have ucs2
Suggested fix:
-------------
the failing piece of the test should be moved from mysql-test/t/loaddata.test to
mysql-test/t/ctype_ucs.test.
THOUGH IT IS NOT.
The following error message is misleading because it claims
that the BLOB space is not counted.
"ERROR 1118 (42000): Row size too large. The maximum row size for
the used table type, not counting BLOBs, is 8126. You have to
change some columns to TEXT or BLOBs"
When the ROW_FORMAT=compact or ROW_FORMAT=REDUNDANT is used,
the BLOB prefix is stored inline along with the row. So
the above error message is changed as follows depending on
the row format used:
For ROW_FORMAT=COMPRESSED or ROW_FORMAT=DYNAMIC, the error
message is as follows:
"ERROR 42000: Row size too large (> 8126). Changing some
columns to TEXT or BLOB may help. In current row format,
BLOB prefix of 0 bytes is stored inline."
For ROW_FORMAT=COMPACT or ROW_FORMAT=REDUNDANT, the error
message is as follows:
"ERROR 42000: Row size too large (> 8126). Changing some
columns to TEXT or BLOB or using ROW_FORMAT=DYNAMIC or
ROW_FORMAT=COMPRESSED may help. In current row
format, BLOB prefix of 768 bytes is stored inline."
rb://1252 approved by Marko Makela
Backport from mysql-5.6 the fix
(revision-id sunny.bains@oracle.com-20120315045831-20rgfa4cozxmz7kz)
Bug#13839886 - CRASH IN INNOBASE_NEXT_AUTOINC
The assertion introduce in the fix for Bug#13817703
is too strong, a negative number can be greater
than the column max value, when the column value is
a negative number.
rb://978 Approved by Jimmy Yang.
rb:1236 approved by Marko Makela
NUMBERS
If a system variable was declared as deprecated without mention of an
alternative, the message would look funny, e.g. for @@delayed_insert_limit:
Warning 1287 '@@delayed_insert_limit' is deprecated and
will be removed in MySQL .
The message was meant to display the version number, but it's not
possible to give one when declaring a system variable.
The fix does two things:
1) The definition of the message
ER_WARN_DEPRECATED_SYNTAX_NO_REPLACEMENT is changed so that it does
not display a version number. I.e. in English the message now reads:
Warning 1287 The syntax '@@delayed_insert_limit' is deprecated and
will be removed in a future version.
2) The message ER_WARN_DEPRECATED_SYNTAX_WITH_VER is discontinued in
favor of ER_WARN_DEPRECATED_SYNTAX for system variables. This change
was already done in versions 5.6 and above as part of wl#5265. This
part is simply back-ported from the worklog.
WARNING
This patch is for mysql-5.5 only,
to be null-merged to mysql-5.6 and mysql-trunk.
This is a partial rollback of the file io instrumentation,
removing the instrumentation for mysql_file_stat in the archive engine.
See the bug comments for details.
CONNECTIONS IF SPE
Problem description: -ssl-key value is not validated, you can assign any bogus
text to --ssl-key and it is not verified that it exists, and more importantly,
it allows the client to connect to mysqld.
Fix: Added proper validations checks for --ssl-key.
Note:
1) Documentation changes require for 5.1, 5.5, 5.6 and trunk in the sections
listed below and the details are :
http://dev.mysql.com/doc/refman/5.6/en/ssl-options.html#option_general_ssl
and
REQUIRE SSL section of
http://dev.mysql.com/doc/refman/5.6/en/grant.html
2) Client having with option '--ssl', should able to get ssl connection. This
will be implemented as part of separate fix in 5.6 and trunk.
Problem description:
Table 't' created with two colums having compound index on both the
columns under innodb/myisam engine at remote machine. In the local
machine same table is created undet the federated engine.
A select having where clause with along 'AND' operation gives wrong
results on local machine.
Analysis:
The given query at federated engine is wrongly transformed by
federated::create_where_from_key() function and the same was sent to
the remote machine. Hence the local machine is showing wrong results.
Given query "select c1 from t where c1 <= 2 and c2 = 1;"
Query transformed, after ha_federated::create_where_from_key() function is:
SELECT `c1`, `c2` FROM `t` WHERE (`c1` IS NOT NULL ) AND
( (`c1` >= 2) AND (`c2` <= 1) ) and the same sent to real_query().
In the above the '<=' and '=' conditions were transformed to '>=' and
'<=' respectively.
ha_federated::create_where_from_key() function behaving as below:
The key_range is having both the start_key and end_key. The start_key
is used to get "(`c1` IS NOT NULL )" part of the where clause, this
transformation is correct. The end_key is used to get "( (`c1` >= 2)
AND (`c2` <= 1) )", which is wrong, here the given conditions('<=' and '=')
are changed as wrong conditions('>=' and '<=').
The end_key is having {key = 0x39fa6d0 "", length = 10, keypart_map = 3,
flag = HA_READ_AFTER_KEY}
The store_length is having value '5'. Based on store_length and length
values the condition values is applied in HA_READ_AFTER_KEY switch case.
The switch case 'HA_READ_AFTER_KEY' is applicable to only the last part of
the end_key and for previous parts it is going to 'HA_READ_KEY_OR_NEXT' case,
here the '>=' is getting added as a condition instead of '<='.
Fix:
Updated the 'if' condition in 'HA_READ_AFTER_KEY' case to affect for all
parts of the end_key. i.e 'i > 0' will used for end_key, Hence added it in
the if condition.
mysql-test/suite/federated/federated.test:
modified the federated.inc file location
mysql-test/suite/federated/federated_archive.test:
modified the federated.inc file location
mysql-test/suite/federated/federated_bug_13118.test:
modified the federated.inc file location
mysql-test/suite/federated/federated_bug_25714.test:
modified the federated.inc file location
mysql-test/suite/federated/federated_bug_35333.test:
modified the federated.inc file location
mysql-test/suite/federated/federated_debug.test:
modified the federated.inc file location
mysql-test/suite/federated/federated_innodb.test:
modified the federated.inc file location
mysql-test/suite/federated/federated_server.test:
modified the federated.inc file location
mysql-test/suite/federated/federated_transactions.test:
modified the federated.inc file location
mysql-test/suite/federated/include/federated.inc:
moved the file from federated suite to federated/include folder
mysql-test/suite/federated/include/federated_cleanup.inc:
moved the file from federated suite to federated/include folder
mysql-test/suite/federated/include/have_federated_db.inc:
moved the file from federated suite to federated/include folder
storage/federated/ha_federated.cc:
updated the 'if condition' in ha_federated::create_where_from_key()
function.
Backporting the WL#5716, "Information schema table for InnoDB
buffer pool information". Backporting revisions 2876.244.113,
2876.244.102 from mysql-trunk.
rb://1175 approved by Jimmy Yang.
Backporting the WL#5716, "Information schema table for InnoDB
buffer pool information". Backporting revisions 2876.244.113,
2876.244.102 from mysql-trunk.
rb://1177 approved by Jimmy Yang.
"ORDER BY" AND "LIMIT BY" CLAUSE
PROBLEM:
When a 'limit' clause is specified in a query along with
group by and order by, optimizer chooses wrong index
there by examining more number of rows than required.
However without the 'limit' clause, optimizer chooses
the right index.
ANALYSIS:
With respect to the query specified, range optimizer chooses
the first index as there is a range present ( on 'a'). Optimizer
then checks for an index which would give records in sorted
order for the 'group by' clause.
While checking chooses the second index (on 'c,b,a') based on
the 'limit' specified and the selectivity of
'quick_condition_rows' (number of rows present in the range)
in 'test_if_skip_sort_order' function.
But, it fails to consider that an order by clause on a
different column will result in scanning the entire index and
hence the estimated number of rows calculated above are
wrong (which results in choosing the second index).
FIX:
Do not enforce the 'limit' clause in the call to
'test_if_skip_sort_order' if we are creating a temporary
table. Creation of temporary table indicates that there would be
more post-processing and hence will need all the rows.
This fix is backported from 5.6. This problem is fixed in 5.6 as
part of changes for work log #5558
mysql-test/r/subselect.result:
Changes for Bug#11762052 results in the correct number of rows.
sql/sql_select.cc:
Do not pass the actual 'limit' value if 'need_tmp' is true.
rpl_cant_read_event_incident:
Slave applies updates from bug11747416_32228_binlog.000001 file which
contains a CREATE TABLE t statement and an incident, when SQL thread is
running slowly IO thread may reach the incident before SQL thread
executes the create table statement.
Execute "drop table if exists t" and also perform a RESET MASTER to
clean slave binary logs.
rpl_bug41902:
Error "MYSQL_BIN_LOG::purge_logs was called with file
./master-bin.000001 not listed in the index." suppression is not
considering windows path, there is ".\master-bin.000001".
Changed suppression to: "MYSQL_BIN_LOG::purge_logs was called with file
..master-bin.000001 not listed in the index", to match ".\" and "./".
This is a followup patch for the bug enabling the test
i_binlog.binlog_mysqlbinlog_file_write.test
this was disabled in mysql trunk and mysql 5.5 as in the release
build mysqlbinlog was not debug compiled whereas the mysqld was.
Since have_debug.inc script checks only for mysqld to be debug
compiled, the test was not being skipped on release builds.
We resolve this problem by creating a new inc file
mysqlbinlog_have_debug.inc which checks exclusively for mysqlbinlog
to be debug compiled. if not it skips the test.
mysql-test/include/mysqlbinlog_have_debug.inc:
new inc file to check if mysqlbinlog is debug compiled.
1. Clear text password client plugin disabled by default.
2. Added an environment variable LIBMYSQL_ENABLE_CLEARTEXT_PLUGIN, that
when set to something starting with '1', 'Y' or 'y' will enable the clear
text
plugin for all connections.
3. Added a new mysql_options() option : MYSQL_ENABLE_CLEARTEXT_PLUGIN
that takes an my_bool argument. When the value of the argument is non-zero
the clear text plugin is enabled for this connection only.
4. Added an enable-cleartext-plugin config file option that takes a numeric
argument. If the numeric value of the numeric argument is non-zero the
clear
text plugin is enabled for the connection
5. Added a boolean command line option "--enable_cleartext_plugin" to
mysql, mysqlslap and mysqladmin. When specified it will call mysql_options
with the effect of #3
6. Added a new CLEARTEXT option to the connect command in mysqltest.
When specified it will enable the cleartext plugin for usage.
7. Added test cases and updated existing ones that need the clear text
plugin.
executing
The problem is that mysql lacks information about the objects a view
depends on so it can't dump views and tables in the proper order.
Thus it needs to create "stand-in" myisam tables for each view while
dumping the tables that it later drops and replaces with the actual view
view definition.
But since views can have much more columns than an actual table creating
these stand-in tables may be problematic.
There's no way to portably find out how many columns an mysiam table
can have. It's a complicated formula depending on internal server constants.
Thus we can't have a reliable error check without repeating the logic and
the formula inside mysqldump.
1. Changed the type of the columns of the stand-in tables mysqldump
makes to satisfy view dependencies from the original type to smallint
to save on row space.
2. Added a warning on the mysqldump's standard error for a possible
problems replaying the dump file if the columns of a view exceed 1000.
3. Added a test case.
Print the warning(note):
YEAR(x) is deprecated and will be removed in a future release. Please use YEAR(4) instead
on "CREATE TABLE ... YEAR(x)" or "ALTER TABLE MODIFY ... YEAR(x)", where x != 4
