case than in corr index".
Server was unable to find existing or explicitly created supporting
index for foreign key if corresponding statement clause used field
names in case different than one used in key specification and created
yet another supporting index.
In cases when name of constraint (and thus name of generated index)
was the same as name of existing/explicitly created index this led
to duplicate key name error.
The problem was that unlike all other code Key_part_spec::operator==()
compared field names in case sensitive fashion. As result routines
responsible for getting rid of redundant generated supporting indexes
for foreign key were not working properly for versions of field names
using different cases.
(backported from mysql-trunk)
sql/sql_class.cc:
Make field name comparison case-insensitive like it is
in the rest of server.
- Changed to still use bcmp() in certain cases becasue
- Faster for short unaligneed strings than memcmp()
- Bettern when using valgrind
- Changed to use my_sprintf() instead of sprintf() to get higher portability for old systems
- Changed code to use MariaDB version of select->skip_record()
- Removed -%::SCCS/s.% from Makefile.am:s to remove automake warnings
temp table
This patch introduces two key changes in the replication's behavior.
Firstly, it reverts part of BUG#51894 which puts any update to temporary tables
into the trx-cache. Now, updates to temporary tables are handled according to
the type of their engines as a regular table.
Secondly, an unsafe mixed statement, (i.e. a statement that access transactional
table as well non-transactional or temporary table, and writes to any of them),
are written into the trx-cache in order to minimize errors in the execution when
the statement logging format is in use.
Such changes has a direct impact on which statements are classified as unsafe
statements and thus part of BUG#53259 is reverted.
After BUG#36649, warnings for sub-statements are cleared when a
new sub-statement is started. This is problematic since it suppresses
warnings for unsafe statements in some cases. It is important that we
always give a warning to the client, because the user needs to know
when there is a risk that the slave goes out of sync.
We fixed the problem by generating warning messages for unsafe statements
while returning from a stored procedure, function, trigger or while
executing a top level statement.
We also started checking unsafeness when both performance and log tables are
used. This is necessary after the performance schema which does a distinction
between performance and log tables.
mysql-test/extra/rpl_tests/create_recursive_construct.inc:
Changed the order of the calls in the procedure because the code
that checks if a warning message is printed out expects that the
first statement gives an warning what is not the case for INSERT
INTO ta$CRC_ARG_level VALUES (47);
mysql-test/suite/binlog/r/binlog_stm_unsafe_warning.result:
Updated the result file.
mysql-test/suite/binlog/r/binlog_unsafe.result:
There are several changes here:
(1) - Changed the CREATE PROCEDURE $CRC.
(2) - The procedure $CRC was failing and the content of the binlog
was being printed out, after fix (1) the failure disappeared.
(3) - The warning message for unsafeness due to auto-increment collumns was
changed.
(4) - The warning message for unsafeness due to VERSION(), RAND() was changed.
mysql-test/suite/binlog/t/binlog_stm_unsafe_warning.test:
Tested filters.
mysql-test/suite/binlog/t/binlog_unsafe.test:
Reenabled the test case binlog_unsafe.
mysql-test/suite/binlog/t/disabled.def:
Reenabled the test case binlog_unsafe.
mysql-test/suite/rpl/r/rpl_begin_commit_rollback.result:
Updated the result file.
mysql-test/suite/rpl/r/rpl_non_direct_stm_mixing_engines.result:
Updated the result file.
mysql-test/suite/rpl/r/rpl_stm_auto_increment_bug33029.result:
Updated the result file.
sql/sql_class.cc:
Moved the stmt_accessed_table_flag variable and related information to the
LEX as we need the variable reset after each statement even inside a stored
procedure, what did not happen if the information was in the THD.
Changed the routine in the THD::binlog_query that prints the warning
messages to avoid trying to print them when inside a stored procedure,
function or trigger.
Checked for unsafeness when both performance and log tables where used.
After the introduction of the performance schema, we need to check both.
******
This patch fixes the following bugs:
- Bug#5889: Exit handler for a warning doesn't hide the warning in
trigger
- Bug#9857: Stored procedures: handler for sqlwarning ignored
- Bug#23032: Handlers declared in a SP do not handle warnings generated
in sub-SP
- Bug#36185: Incorrect precedence for warning and exception handlers
The problem was in the way warnings/errors during stored routine execution
were handled. Prior to this patch the logic was as follows:
- when a warning/an error happens: if we're executing a stored routine,
and there is a handler for that warning/error, remember the handler,
ignore the warning/error and continue execution.
- after a stored routine instruction is executed: check for a remembered
handler and activate one (if any).
This logic caused several problems:
- if one instruction generates several warnings (errors) it's impossible
to choose the right handler -- a handler for the first generated
condition was chosen and remembered for activation.
- mess with handling conditions in scopes different from the current one.
- not putting generated warnings/errors into Warning Info (Diagnostic
Area) is against The Standard.
The patch changes the logic as follows:
- Diagnostic Area is cleared on the beginning of each statement that
either is able to generate warnings, or is able to work with tables.
- at the end of a stored routine instruction, Diagnostic Area is left
intact.
- Diagnostic Area is checked after each stored routine instruction. If
an instruction generates several condition, it's now possible to take a
look at all of them and determine an appropriate handler.
mysql-test/r/signal.result:
Update result file:
1. handled conditions are not cleared any more;
2. reflect changes in signal.test
mysql-test/r/signal_demo3.result:
Update result file: handled conditions are not cleared any more.
Due to playing with max_error_count, resulting warning lists
have changed.
mysql-test/r/sp-big.result:
Update result file: handled conditions are not cleared any more.
mysql-test/r/sp-bugs.result:
Update result file: handled conditions are not cleared any more.
mysql-test/r/sp-code.result:
Update result file:
1. handled conditions are not cleared any more.
2. add result for a new test case in sp-code.test.
mysql-test/r/sp-error.result:
Update result file:
1. handled conditions are not cleared any more.
2. add result for a new test case in sp-error.test.
mysql-test/r/sp.result:
Update result file: handled conditions are not cleared any more.
mysql-test/r/sp_trans.result:
Update result file: handled conditions are not cleared any more.
mysql-test/r/strict.result:
Update result file: handled conditions are not cleared any more.
mysql-test/r/view.result:
Update result file: handled conditions are not cleared any more.
mysql-test/suite/funcs_1/r/innodb_storedproc_02.result:
Update result file: handled conditions are not cleared any more.
mysql-test/suite/funcs_1/r/memory_storedproc_02.result:
Update result file: handled conditions are not cleared any more.
mysql-test/suite/funcs_1/r/myisam_storedproc_02.result:
Update result file: handled conditions are not cleared any more.
mysql-test/suite/funcs_1/r/storedproc.result:
Update result file: handled conditions are not cleared any more.
mysql-test/suite/rpl/r/rpl_row_sp005.result:
Update result file: handled conditions are not cleared any more.
mysql-test/suite/rpl/r/rpl_row_sp006_InnoDB.result:
Update result file: handled conditions are not cleared any more.
mysql-test/suite/rpl/r/rpl_row_trig003.result:
Update result file: handled conditions are not cleared any more.
mysql-test/t/signal.test:
Make a test case more readable in the result file.
mysql-test/t/sp-code.test:
Add a test case for Bug#23032 checking that
No Data takes precedence on Warning.
mysql-test/t/sp-error.test:
Adding test cases for:
- Bug#23032
- Bug#36185
- Bug#5889
- Bug#9857
mysql-test/t/sp.test:
Fixing test case to reflect behavioral changes made by the patch.
sql/sp_head.cc:
Reset the per-statement warning count before executing
a stored procedure instruction.
Move to a separate function code which checks the
completion status of the executed statement and searches
for a handler.
Remove redundant code now that search for a handler is
done after execution, errors are always pushed.
sql/sp_pcontext.h:
Remove unused code.
sql/sp_rcontext.cc:
- Polish sp_rcontext::find_handler(): use sp_rcontext::m_hfound instead
of an extra local variable;
- Remove sp_rcontext::handle_condition();
- Introduce sp_rcontext::activate_handler(), which prepares
previously found handler for execution.
- Move sp_rcontext::enter_handler() code into activate_handler(),
because enter_handler() is used only from there;
- Cleanups;
- Introduce DBUG_EXECUTE_IF() for a test case in sp-code.test
sql/sp_rcontext.h:
- Remove unused code
- Cleanups
sql/sql_class.cc:
Merge THD::raise_condition_no_handler() into THD::raise_condition().
After the patch raise_condition_no_handler() was called
in raise_condition() only.
sql/sql_class.h:
Remove raise_condition_no_handler().
sql/sql_error.cc:
Remove Warning_info::reserve_space() -- handled conditions are not
cleared any more, so there is no need for RESIGNAL to re-push them.
sql/sql_error.h:
Remove Warning_info::reserve_space().
sql/sql_signal.cc:
Handled conditions are not cleared any more,
so there is no need for RESIGNAL to re-push them.
Remove dead and unused code.
Update to reflect the code review requests.
include/thr_lock.h:
Remove declarations for THR_LOCK_OWNER,
added along with the patch for sensitive cursors.
mysys/thr_lock.c:
Remove support for multiple thr_lock requestors
per THD.
sql/lock.cc:
Revert the patch that added support for sensitive cursors.
sql/sp_rcontext.cc:
Updated the use of mysql_open_cursor().
sql/sql_class.cc:
Move the instance of Server_side_cursor
from class Prepared_statement to class Statement.
sql/sql_class.h:
Move the isntance of Server_side_cursor
from class Prepared_statement to class
Statement.
Remove multiple lock_ids of thr_lock.
sql/sql_cursor.cc:
Remove Sensitive_cursor implementation.
sql/sql_cursor.h:
Remove declarations for sensitive cursors.
sql/sql_prepare.cc:
Move the declaration of instance of Server_side_cursor
from class Statement to class Prepared_statement,
where it's used.
sql/sql_select.cc:
Remove sensitive cursor support.
sql/sql_select.h:
Remove sensitive cursor support.
sql/sql_union.cc:
Remove sensitive cursor support.
This patch also fixes Bug#55452 "SET PASSWORD is
replicated twice in RBR mode".
The goal of this patch is to remove the release of
metadata locks from close_thread_tables().
This is necessary to not mistakenly release
the locks in the course of a multi-step
operation that involves multiple close_thread_tables()
or close_tables_for_reopen().
On the same token, move statement commit outside
close_thread_tables().
Other cleanups:
Cleanup COM_FIELD_LIST.
Don't call close_thread_tables() in COM_SHUTDOWN -- there
are no open tables there that can be closed (we leave
the locked tables mode in THD destructor, and this
close_thread_tables() won't leave it anyway).
Make open_and_lock_tables() and open_and_lock_tables_derived()
call close_thread_tables() upon failure.
Remove the calls to close_thread_tables() that are now
unnecessary.
Simplify the back off condition in Open_table_context.
Streamline metadata lock handling in LOCK TABLES
implementation.
Add asserts to ensure correct life cycle of
statement transaction in a session.
Remove a piece of dead code that has also become redundant
after the fix for Bug 37521.
mysql-test/r/variables.result:
Update results: set @@autocommit and statement transaction/
prelocked mode.
mysql-test/r/view.result:
A harmless change in CHECK TABLE <view> status for a broken view.
If previously a failure to prelock all functions used in a view
would leave the connection in LTM_PRELOCKED mode, now we call
close_thread_tables() from open_and_lock_tables()
and leave prelocked mode, thus some check in mysql_admin_table() that
works only in prelocked/locked tables mode is no longer activated.
mysql-test/suite/rpl/r/rpl_row_implicit_commit_binlog.result:
Fixed Bug#55452 "SET PASSWORD is replicated twice in
RBR mode": extra binlog events are gone from the
binary log.
mysql-test/t/variables.test:
Add a test case: set autocommit and statement transaction/prelocked
mode.
sql/event_data_objects.cc:
Simplify code in Event_job_data::execute().
Move sp_head memory management to lex_end().
sql/event_db_repository.cc:
Move the release of metadata locks outside
close_thread_tables().
Make sure we call close_thread_tables() when
open_and_lock_tables() fails and remove extra
code from the events data dictionary.
Use close_mysql_tables(), a new internal
function to properly close mysql.* tables
in the data dictionary.
Contract Event_db_repository::drop_events_by_field,
drop_schema_events into one function.
When dropping all events in a schema,
make sure we don't mistakenly release all
locks acquired by DROP DATABASE. These
include locks on the database name
and the global intention exclusive
metadata lock.
sql/event_db_repository.h:
Function open_event_table() does not require an instance
of Event_db_repository.
sql/events.cc:
Use close_mysql_tables() instead of close_thread_tables()
to bootstrap events, since the latter no longer
releases metadata locks.
sql/ha_ndbcluster.cc:
- mysql_rm_table_part2 no longer releases
acquired metadata locks. Do it in the caller.
sql/ha_ndbcluster_binlog.cc:
Deploy the new protocol for closing thread
tables in run_query() and ndb_binlog_index
code.
sql/handler.cc:
Assert that we never call ha_commit_trans/
ha_rollback_trans in sub-statement, which
is now the case.
sql/handler.h:
Add an accessor to check whether THD_TRANS object
is empty (has no transaction started).
sql/log.cc:
Update a comment.
sql/log_event.cc:
Since now we commit/rollback statement transaction in
mysql_execute_command(), we need a mechanism to communicate
from Query_log_event::do_apply_event() to mysql_execute_command()
that the statement transaction should be rolled back, not committed.
Ideally it would be a virtual method of THD. I hesitate
to make THD a virtual base class in this already large patch.
Use a thd->variables.option_bits for now.
Remove a call to close_thread_tables() from the slave IO
thread. It doesn't open any tables, and the protocol
for closing thread tables is more complicated now.
Make sure we properly close thread tables, however,
in Load_data_log_event, which doesn't
follow the standard server execution procedure
with mysql_execute_command().
@todo: this piece should use Server_runnable
framework instead.
Remove an unnecessary call to mysql_unlock_tables().
sql/rpl_rli.cc:
Update Relay_log_info::slave_close_thread_tables()
to follow the new close protocol.
sql/set_var.cc:
Remove an unused header.
sql/slave.cc:
Remove an unnecessary call to
close_thread_tables().
sql/sp.cc:
Remove unnecessary calls to close_thread_tables()
from SP DDL implementation. The tables will
be closed by the caller, in mysql_execute_command().
When dropping all routines in a database, make sure
to not mistakenly drop all metadata locks acquired
so far, they include the scoped lock on the schema.
sql/sp_head.cc:
Correct the protocol that closes thread tables
in an SP instruction.
Clear lex->sphead before cleaning up lex
with lex_end to make sure that we don't
delete the sphead twice. It's considered
to be "cleaner" and more in line with
future changes than calling delete lex->sphead
in other places that cleanup the lex.
sql/sp_head.h:
When destroying m_lex_keeper of an instruction,
don't delete the sphead that all lex objects
share.
@todo: don't store a reference to routine's sp_head
instance in instruction's lex.
sql/sql_acl.cc:
Don't call close_thread_tables() where the caller will
do that for us.
Fix Bug#55452 "SET PASSWORD is replicated twice in RBR
mode" by disabling RBR replication in change_password()
function.
Use close_mysql_tables() in bootstrap and ACL reload
code to make sure we release all metadata locks.
sql/sql_base.cc:
This is the main part of the patch:
- remove manipulation with thd->transaction
and thd->mdl_context from close_thread_tables().
Now this function is only responsible for closing
tables, nothing else.
This is necessary to be able to easily use
close_thread_tables() in procedures, that
involve multiple open/close tables, which all
need to be protected continuously by metadata
locks.
Add asserts ensuring that TABLE object
is only used when is protected by a metadata lock.
Simplify the back off condition of Open_table_context,
we no longer need to look at the autocommit mode.
Make open_and_lock_tables() and open_normal_and_derived_tables()
close thread tables and release metadata locks acquired so-far
upon failure. This simplifies their usage.
Implement close_mysql_tables().
sql/sql_base.h:
Add declaration for close_mysql_tables().
sql/sql_class.cc:
Remove a piece of dead code that has also become redundant
after the fix for Bug 37521.
The code became dead when my_eof() was made a non-protocol method,
but a method that merely modifies the diagnostics area.
The code became redundant with the fix for Bug#37521, when
we started to cal close_thread_tables() before
Protocol::end_statement().
sql/sql_do.cc:
Do nothing in DO if inside a substatement
(the assert moved out of trans_rollback_stmt).
sql/sql_handler.cc:
Add comments.
sql/sql_insert.cc:
Remove dead code.
Release metadata locks explicitly at the
end of the delayed insert thread.
sql/sql_lex.cc:
Add destruction of lex->sphead to lex_end(),
lex "reset" method called at the end of each statement.
sql/sql_parse.cc:
Move close_thread_tables() and other related
cleanups to mysql_execute_command()
from dispatch_command(). This has become
possible after the fix for Bug#37521.
Mark federated SERVER statements as DDL.
Next step: make sure that we don't store
eof packet in the query cache, and move
the query cache code outside mysql_parse.
Brush up the code of COM_FIELD_LIST.
Remove unnecessary calls to close_thread_tables().
When killing a query, don't report "OK"
if it was a suicide.
sql/sql_parse.h:
Remove declaration of a function that is now static.
sql/sql_partition.cc:
Remove an unnecessary call to close_thread_tables().
sql/sql_plugin.cc:
open_and_lock_tables() will clean up
after itself after a failure.
Move close_thread_tables() above
end: label, and replace with close_mysql_tables(),
which will also release the metadata lock
on mysql.plugin.
sql/sql_prepare.cc:
Now that we no longer release locks in close_thread_tables()
statement prepare code has become more straightforward.
Remove the now redundant check for thd->killed() (used
only by the backup project) from Execute_server_runnable.
Reorder code to take into account that now mysql_execute_command()
performs lex->unit.cleanup() and close_thread_tables().
sql/sql_priv.h:
Add a new option to server options to interact
between the slave SQL thread and execution
framework (hack). @todo: use a virtual
method of class THD instead.
sql/sql_servers.cc:
Due to Bug 25705 replication of
DROP/CREATE/ALTER SERVER is broken.
Make sure at least we do not attempt to
replicate these statements using RBR,
as this violates the assert in close_mysql_tables().
sql/sql_table.cc:
Do not release metadata locks in mysql_rm_table_part2,
this is done by the caller.
Do not call close_thread_tables() in mysql_create_table(),
this is done by the caller.
Fix a bug in DROP TABLE under LOCK TABLES when,
upon error in wait_while_table_is_used() we would mistakenly
release the metadata lock on a non-dropped table.
Explicitly release metadata locks when doing an implicit
commit.
sql/sql_trigger.cc:
Now that we delete lex->sphead in lex_end(),
zero the trigger's sphead in lex after loading
the trigger, to avoid double deletion.
sql/sql_udf.cc:
Use close_mysql_tables() instead of close_thread_tables().
sql/sys_vars.cc:
Remove code added in scope of WL#4284 which would
break when we perform set @@session.autocommit along
with setting other variables and using tables or functions.
A test case added to variables.test.
sql/transaction.cc:
Add asserts.
sql/tztime.cc:
Use close_mysql_tables() rather than close_thread_tables().
If the expression for a virtual column of table contained datetime
comparison then the execution of the second query that used this
virtual column caused a crash. It happened because the execution
of the first query that used this virtual column inserted a cached
item into the expression tree. The cached tree was allocated in
the statement memory while the expression tree was allocated in
the table memory.
Now the cached items that are inserted into expressions for virtual
columns with datetime comparisons are always allocated in the same
mem_root as the expressions for virtual columns. So now the inserted
cached items are valid for any queries that use these virtual columns.
was not cleaned up between PS re-executions. The reason was two-fold:
- a merge with mysql-6.0 missed select_union::cleanup() that should
have cleaned up the temp table, and
- the subclass of select_union used by materialization didn't call
the base class cleanup() method.
1. Changed the lazy optimization for subqueries that can be
materialized into bottom-up optimization during the optimization of
the main query.
The main change is implemented by the method
Item_in_subselect::setup_engine.
All other changes were required to correct problems resulting from
changing the order of optimization. Most of these problems followed
the same pattern - there are some shared structures between a
subquery and its parent query. Depending on which one is optimized
first (parent or child query), these shared strucutres may get
different values, thus resulting in an inconsistent query plan.
2. Changed the code-generation for subquery materialization to be
performed in runtime memory for each (re)execution, instead of in
statement memory (once per prepared statement).
- Item_in_subselect::setup_engine() no longer creates materialization
related objects in statement memory.
- Merged subselect_hash_sj_engine::init_permanent and
subselect_hash_sj_engine::init_runtime into
subselect_hash_sj_engine::init, which is called for each
(re)execution.
- Fixed deletion of the temp table accordingly.
mysql-test/r/subselect_mat.result:
Adjusted changed EXPLAIN because of earlier optimization of subqueries.
bytes_received/bytes_sent are ulonglong so they cannot be handled by the
ulong handling code in add_to_status/add_diff_to_status().
Fixed by adding code to handle these two variables in
add_to_status()/add_diff_to_status() and making sure they are not a subject
to the ulong handling code.
libmysqld/Makefile.am:
The new file added.
mysql-test/r/index_merge_myisam.result:
subquery_cache optimization option added.
mysql-test/r/myisam_mrr.result:
subquery_cache optimization option added.
mysql-test/r/subquery_cache.result:
The subquery cache tests added.
mysql-test/r/subselect3.result:
Subquery cache switched off to avoid changing read statistics.
mysql-test/r/subselect3_jcl6.result:
Subquery cache switched off to avoid changing read statistics.
mysql-test/r/subselect_no_mat.result:
subquery_cache optimization option added.
mysql-test/r/subselect_no_opts.result:
subquery_cache optimization option added.
mysql-test/r/subselect_no_semijoin.result:
subquery_cache optimization option added.
mysql-test/r/subselect_sj.result:
subquery_cache optimization option added.
mysql-test/r/subselect_sj_jcl6.result:
subquery_cache optimization option added.
mysql-test/t/subquery_cache.test:
The subquery cache tests added.
mysql-test/t/subselect3.test:
Subquery cache switched off to avoid changing read statistics.
sql/CMakeLists.txt:
The new file added.
sql/Makefile.am:
The new files added.
sql/item.cc:
Expression cache item (Item_cache_wrapper) added.
Item_ref and Item_field fixed for correct usage of result field and fast resolwing in SP.
sql/item.h:
Expression cache item (Item_cache_wrapper) added.
Item_ref and Item_field fixed for correct usage of result field and fast resolwing in SP.
sql/item_cmpfunc.cc:
Subquery cache added.
sql/item_cmpfunc.h:
Subquery cache added.
sql/item_subselect.cc:
Subquery cache added.
sql/item_subselect.h:
Subquery cache added.
sql/item_sum.cc:
Registration of subquery parameters added.
sql/mysql_priv.h:
subquery_cache optimization option added.
sql/mysqld.cc:
subquery_cache optimization option added.
sql/opt_range.cc:
Fix due to subquery cache.
sql/opt_subselect.cc:
Parameters of the function cahnged.
sql/procedure.h:
.h file guard added.
sql/sql_base.cc:
Registration of subquery parameters added.
sql/sql_class.cc:
Option to allow add indeces to temporary table.
sql/sql_class.h:
Item iterators added.
Option to allow add indeces to temporary table.
sql/sql_expression_cache.cc:
Expression cache for caching subqueries added.
sql/sql_expression_cache.h:
Expression cache for caching subqueries added.
sql/sql_lex.cc:
Registration of subquery parameters added.
sql/sql_lex.h:
Registration of subqueries and subquery parameters added.
sql/sql_select.cc:
Subquery cache added.
sql/sql_select.h:
Subquery cache added.
sql/sql_union.cc:
A new parameter to the function added.
sql/sql_update.cc:
A new parameter to the function added.
sql/table.cc:
Procedures to manage temporarty tables index added.
sql/table.h:
Procedures to manage temporarty tables index added.
storage/maria/ha_maria.cc:
Fix of handler to allow destoy a table in case of error during the table creation.
storage/maria/ha_maria.h:
.h file guard added.
storage/myisam/ha_myisam.cc:
Fix of handler to allow destoy a table in case of error during the table creation.
Essentially, the problem is that safemalloc is excruciatingly
slow as it checks all allocated blocks for overrun at each
memory management primitive, yielding a almost exponential
slowdown for the memory management functions (malloc, realloc,
free). The overrun check basically consists of verifying some
bytes of a block for certain magic keys, which catches some
simple forms of overrun. Another minor problem is violation
of aliasing rules and that its own internal list of blocks
is prone to corruption.
Another issue with safemalloc is rather the maintenance cost
as the tool has a significant impact on the server code.
Given the magnitude of memory debuggers available nowadays,
especially those that are provided with the platform malloc
implementation, maintenance of a in-house and largely obsolete
memory debugger becomes a burden that is not worth the effort
due to its slowness and lack of support for detecting more
common forms of heap corruption.
Since there are third-party tools that can provide the same
functionality at a lower or comparable performance cost, the
solution is to simply remove safemalloc. Third-party tools
can provide the same functionality at a lower or comparable
performance cost.
The removal of safemalloc also allows a simplification of the
malloc wrappers, removing quite a bit of kludge: redefinition
of my_malloc, my_free and the removal of the unused second
argument of my_free. Since free() always check whether the
supplied pointer is null, redudant checks are also removed.
Also, this patch adds unit testing for my_malloc and moves
my_realloc implementation into the same file as the other
memory allocation primitives.
client/mysqldump.c:
Pass my_free directly as its signature is compatible with the
callback type -- which wasn't the case for free_table_ent.
DROP USER
RENAME USER CURRENT_USER() ...
GRANT ... TO CURRENT_USER()
REVOKE ... FROM CURRENT_USER()
ALTER DEFINER = CURRENT_USER() EVENTbut, When these statements are binlogged, CURRENT_USER() just is binlogged
as 'CURRENT_USER()', it is not expanded to the real user name. When slave
executes the log event, 'CURRENT_USER()' is expand to the user of slave
SQL thread, but SQL thread's user name always NULL. This breaks the replication.
After this patch, session's user will be written into query log events
if these statements call CURREN_USER() or 'ALTER EVENT' does not assign a definer.
mysql-test/include/diff_tables.inc:
Expend its abilities.
Now it can diff not only in sessions of 'master' and 'slave', but
other sessions as well.
sql/log_event.cc:
session's user will be written into Query_log_event, if is_current_user_used() is TRUE.
On slave SQL thread, Only thd->invoker is written into Query_log_event,
if it exists.
sql/sql_acl.cc:
On slave SQL thread, grantor should copy from thd->invoker, if it exists
sql/sql_class.h:
On slave SQL thread, thd->invoker is used to store the applying event's
invoker.
BUG#54872 MBR: replication failure caused by using tmp table inside transaction
Changed criteria to classify a statement as unsafe in order to reduce the
number of spurious warnings. So a statement is classified as unsafe when
there is on-going transaction at any point of the execution if:
1. The mixed statement is about to update a transactional table and
a non-transactional table.
2. The mixed statement is about to update a temporary transactional
table and a non-transactional table.
3. The mixed statement is about to update a transactional table and
read from a non-transactional table.
4. The mixed statement is about to update a temporary transactional
table and read from a non-transactional table.
5. The mixed statement is about to update a non-transactional table
and read from a transactional table when the isolation level is
lower than repeatable read.
After updating a transactional table if:
6. The mixed statement is about to update a non-transactional table
and read from a temporary transactional table.
7. The mixed statement is about to update a non-transactional table
and read from a temporary transactional table.
8. The mixed statement is about to update a non-transactionala table
and read from a temporary non-transactional table.
9. The mixed statement is about to update a temporary non-transactional
table and update a non-transactional table.
10. The mixed statement is about to update a temporary non-transactional
table and read from a non-transactional table.
11. A statement is about to update a non-transactional table and the
option variables.binlog_direct_non_trans_update is OFF.
The reason for this is that locks acquired may not protected a concurrent
transaction of interfering in the current execution and by consequence in
the result. So the patch reduced the number of spurious unsafe warnings.
Besides we fixed a regression caused by BUG#51894, which makes temporary
tables to go into the trx-cache if there is an on-going transaction. In
MIXED mode, the patch for BUG#51894 ignores that the trx-cache may have
updates to temporary non-transactional tables that must be written to the
binary log while rolling back the transaction.
So we fix this problem by writing the content of the trx-cache to the
binary log while rolling back a transaction if a non-transactional
temporary table was updated and the binary logging format is MIXED.
concurrently execute the statement XA START 'x', then mysqld
server could crash.
sql/sql_class.cc:
xid_cache_insert: added checking for element in cache before
insert it, return TRUE if such element already exists.
sql/sql_parse.cc:
mysql_execute_command modified:
* sequence of calls to xid_cache_search(..)/xid_cache_insert(...)
replaced by call to xid_cache_insert(...) in alternative
'case SQLCOM_XA_START:'
* added comment to alternative 'case SQLCOM_XA_COMMIT:'.
DROP USER
RENAME USER CURRENT_USER() ...
GRANT ... TO CURRENT_USER()
REVOKE ... FROM CURRENT_USER()
ALTER DEFINER = CURRENT_USER() EVENTbut, When these statements are binlogged, CURRENT_USER() just is binlogged
as 'CURRENT_USER()', it is not expanded to the real user name. When slave
executes the log event, 'CURRENT_USER()' is expand to the user of slave
SQL thread, but SQL thread's user name always NULL. This breaks the replication.
After this patch, session's user will be written into query log events
if these statements call CURREN_USER() or 'ALTER EVENT' does not assign a definer.
mysql-test/include/diff_tables.inc:
Expend its abilities.
Now it can diff not only in sessions of 'master' and 'slave', but
other sessions as well.
mysql-test/include/rpl_diff_tables.inc:
Diff the same table between master and slaves.
sql/log_event.cc:
session's user will be written into Query_log_event, if is_current_user_used() is TRUE.
On slave SQL thread, Only thd->variables.current_user is written into Query_log_event,
if it exists.
sql/sql_acl.cc:
On slave SQL thread, grantor should copy from thd->variables.current_user, if it exists
sql/sql_class.h:
On slave SQL thread, thd->variables.current_user is used to store the applying event's
invoker.
