Implement a new mode for parallel replication. In this mode, all transactions
are optimistically attempted applied in parallel. In case of conflicts, the
offending transaction is rolled back and retried later non-parallel.
This is an early-release patch to facilitate testing, more changes to user
interface / options will be expected. The new mode is not enabled by default.
Remove call to deprecated set_thread_state. It is noop anyway, but generates
function call independently of performance schema state. According to perf
this saves ~0.2% of execution time.
Do not allow server to start if binlog_format is set
to a format other than ROW. Also restrict the change
of GLOBAL/SESSION binlog_format value at runtime.
Do not allow server to start if binlog_format is set
to a format other than ROW. Also restrict the change
of GLOBAL/SESSION binlog_format value at runtime.
This bug was seen when parallel replication experienced a deadlock between
transactions T1 and T2, where T2 has reached the commit phase and is waiting
for T1 to commit first. In this case, the deadlock is broken by sending a kill
to T2; that kill error is then later detected and converted to a deadlock
error, which causes T2 to be rolled back and retried.
The problem was that the kill caused ha_commit_trans() to errorneously call
wakeup_subsequent_commits() on T3, signalling it to abort because T2 failed
during commit. This is incorrect, because the error in T2 is only a temporary
error, which will be resolved by normal transaction retry. We should not
signal error to the next transaction until we have executed the code that
handles such temporary errors.
So this patch just removes the calls to wakeup_subsequent_commits() from
ha_commit_trans(). They are incorrect in this case, and they are not needed in
general, as wakeup_subsequent_commits() must in any case be called in
finish_event_group() to wakeup any transactions that may have started to wait
after ha_commit_trans(). And normally, wakeup will in fact have happened
earlier, either from the binlog group commit code, or (in case of no
binlogging) after the fast part of InnoDB/XtraDB group commit.
The symptom of this bug was that replication would break on some transaction
with "Commit failed due to failure of an earlier commit on which this one
depends", but with no such failure of an earlier commit visible anywhere.
The code in binlog group commit around wait_for_commit that controls commit
order, did the wakeup of subsequent commits early, as soon as a following
transaction is put into the group commit queue, but before any such commit has
actually taken place. This causes problems with too early wakeup of
transactions that need to wait for prior to commit, but do not take part in
the binlog group commit for one reason or the other.
This patch solves the problem, by moving the wakeup to happen only after the
binlog group commit is completed.
This requires a new solution to ensure that transactions that arrive later
than the leader are still able to participate in group commit. This patch
introduces a flag wait_for_commit::commit_started. When this is set, a waiter
can queue up itself in the group commit queue.
This way, effectively the wait_for_prior_commit() is skipped only for
transactions that participate in group commit, so that skipping the wait is
safe. Other transactions still wait as needed for correctness.
In SAFE_MUTEX builds, reset the wait_for_commit mutex (destroy and
re-initialise), so that SAFE_MUTEX lock order check does not become
confused when the mutex is re-used for a different purpose.
* split my_var class in three - base my_var and two descencants, move
properties into descendants, remove if(), create a virtual method instead
* factor out the common code in the select_var_ident parser rule
Added MAX_STATEMENT_TIME user variable to automaticly kill queries after a given time limit has expired.
- Added timer functions based on pthread_cond_timedwait
- Added kill_handlerton() to signal storage engines about kill/timeout
- Added support for GRANT ... MAX_STATEMENT_TIME=#
- Copy max_statement_time to current user, if stored in mysql.user
- Added status variable max_statement_time_exceeded
- Added KILL_TIMEOUT
- Removed digest hash from performance schema tests as they change all the time.
- Updated test results that changed because of the new user variables or new fields in mysql.user
This functionallity is inspired by work done by Davi Arnaut at twitter.
Test case is copied from Davi's work.
Documentation can be found at
https://kb.askmonty.org/en/how-to-limittimeout-queries/
mysql-test/r/mysqld--help.result:
Updated for new help message
mysql-test/suite/perfschema/r/all_instances.result:
Added new mutex
mysql-test/suite/sys_vars/r/max_statement_time_basic.result:
Added testing of max_statement_time
mysql-test/suite/sys_vars/t/max_statement_time_basic.test:
Added testing of max_statement_time
mysql-test/t/max_statement_time.test:
Added testing of max_statement_time
mysys/CMakeLists.txt:
Added thr_timer
mysys/my_init.c:
mysys/mysys_priv.h:
Added new mutex and condition variables
Added new mutex and condition variables
mysys/thr_timer.c:
Added timer functions based on pthread_cond_timedwait()
This can be compiled with HAVE_TIMER_CREATE to benchmark agains timer_create()/timer_settime()
sql/lex.h:
Added MAX_STATEMENT_TIME
sql/log_event.cc:
Safety fix (timeout should be threated as an interrupted query)
sql/mysqld.cc:
Added support for timers
Added status variable max_statement_time_exceeded
sql/share/errmsg-utf8.txt:
Added ER_QUERY_TIMEOUT
sql/signal_handler.cc:
Added support for KILL_TIMEOUT
sql/sql_acl.cc:
Added support for GRANT ... MAX_STATEMENT_TIME=#
Copy max_statement_time to current user
sql/sql_class.cc:
Added timer functionality to THD.
Added thd_kill_timeout()
sql/sql_class.h:
Added timer functionality to THD.
Added KILL_TIMEOUT
Added max_statement_time variable in similar manner as long_query_time was done.
sql/sql_connect.cc:
Added handling of max_statement_time_exceeded
sql/sql_parse.cc:
Added starting and stopping timers for queries.
sql/sql_show.cc:
Added max_statement_time_exceeded for user/connects status in MariaDB 10.0
sql/sql_yacc.yy:
Added support for GRANT ... MAX_STATEMENT_TIME=# syntax, to be enabled in 10.0
sql/structs.h:
Added max_statement_time user resource
sql/sys_vars.cc:
Added max_statement_time variables
mysql-test/suite/roles/create_and_drop_role_invalid_user_table.test
Removed test as we require all fields in mysql.user table.
scripts/mysql_system_tables.sql
scripts/mysql_system_tables_data.sql
scripts/mysql_system_tables_fix.sql
Updated mysql.user with new max_statement_time field
The reason for the failure was a bug in an include file on debian that causes 'struct stat'
to have different sized depending on the environment.
This patch fixes so that we always include my_global.h or my_config.h before we include any other files.
Other things:
- Removed #include <my_global.h> in some include files; Better to always do this at the top level to have as few
"always-include-this-file-first' files as possible.
- Removed usage of some include files that where already included by my_global.h or by other files.
client/mysql_plugin.c:
Use my_global.h first
client/mysqlslap.c:
Remove duplicated include files
extra/comp_err.c:
Remove duplicated include files
include/m_string.h:
Remove duplicated include files
include/maria.h:
Remove duplicated include files
libmysqld/emb_qcache.cc:
Use my_global.h first
plugin/semisync/semisync.h:
Use my_pthread.h first
sql/datadict.cc:
Use my_global.h first
sql/debug_sync.cc:
Use my_global.h first
sql/derror.cc:
Use my_global.h first
sql/des_key_file.cc:
Use my_global.h first
sql/discover.cc:
Use my_global.h first
sql/event_data_objects.cc:
Use my_global.h first
sql/event_db_repository.cc:
Use my_global.h first
sql/event_parse_data.cc:
Use my_global.h first
sql/event_queue.cc:
Use my_global.h first
sql/event_scheduler.cc:
Use my_global.h first
sql/events.cc:
Use my_global.h first
sql/field.cc:
Use my_global.h first
Remove duplicated include files
sql/field_conv.cc:
Use my_global.h first
sql/filesort.cc:
Use my_global.h first
Remove duplicated include files
sql/gstream.cc:
Use my_global.h first
sql/ha_ndbcluster.cc:
Use my_global.h first
sql/ha_ndbcluster_binlog.cc:
Use my_global.h first
sql/ha_ndbcluster_cond.cc:
Use my_global.h first
sql/ha_partition.cc:
Use my_global.h first
sql/handler.cc:
Use my_global.h first
sql/hash_filo.cc:
Use my_global.h first
sql/hostname.cc:
Use my_global.h first
sql/init.cc:
Use my_global.h first
sql/item.cc:
Use my_global.h first
sql/item_buff.cc:
Use my_global.h first
sql/item_cmpfunc.cc:
Use my_global.h first
sql/item_create.cc:
Use my_global.h first
sql/item_geofunc.cc:
Use my_global.h first
sql/item_inetfunc.cc:
Use my_global.h first
sql/item_row.cc:
Use my_global.h first
sql/item_strfunc.cc:
Use my_global.h first
sql/item_subselect.cc:
Use my_global.h first
sql/item_sum.cc:
Use my_global.h first
sql/item_timefunc.cc:
Use my_global.h first
sql/item_xmlfunc.cc:
Use my_global.h first
sql/key.cc:
Use my_global.h first
sql/lock.cc:
Use my_global.h first
sql/log.cc:
Use my_global.h first
sql/log_event.cc:
Use my_global.h first
sql/log_event_old.cc:
Use my_global.h first
sql/mf_iocache.cc:
Use my_global.h first
sql/mysql_install_db.cc:
Remove duplicated include files
sql/mysqld.cc:
Remove duplicated include files
sql/net_serv.cc:
Remove duplicated include files
sql/opt_range.cc:
Use my_global.h first
sql/opt_subselect.cc:
Use my_global.h first
sql/opt_sum.cc:
Use my_global.h first
sql/parse_file.cc:
Use my_global.h first
sql/partition_info.cc:
Use my_global.h first
sql/procedure.cc:
Use my_global.h first
sql/protocol.cc:
Use my_global.h first
sql/records.cc:
Use my_global.h first
sql/records.h:
Don't include my_global.h
Better to do this at the upper level
sql/repl_failsafe.cc:
Use my_global.h first
sql/rpl_filter.cc:
Use my_global.h first
sql/rpl_gtid.cc:
Use my_global.h first
sql/rpl_handler.cc:
Use my_global.h first
sql/rpl_injector.cc:
Use my_global.h first
sql/rpl_record.cc:
Use my_global.h first
sql/rpl_record_old.cc:
Use my_global.h first
sql/rpl_reporting.cc:
Use my_global.h first
sql/rpl_rli.cc:
Use my_global.h first
sql/rpl_tblmap.cc:
Use my_global.h first
sql/rpl_utility.cc:
Use my_global.h first
sql/set_var.cc:
Added comment
sql/slave.cc:
Use my_global.h first
sql/sp.cc:
Use my_global.h first
sql/sp_cache.cc:
Use my_global.h first
sql/sp_head.cc:
Use my_global.h first
sql/sp_pcontext.cc:
Use my_global.h first
sql/sp_rcontext.cc:
Use my_global.h first
sql/spatial.cc:
Use my_global.h first
sql/sql_acl.cc:
Use my_global.h first
sql/sql_admin.cc:
Use my_global.h first
sql/sql_analyse.cc:
Use my_global.h first
sql/sql_audit.cc:
Use my_global.h first
sql/sql_base.cc:
Use my_global.h first
sql/sql_binlog.cc:
Use my_global.h first
sql/sql_bootstrap.cc:
Use my_global.h first
Use my_global.h first
sql/sql_cache.cc:
Use my_global.h first
sql/sql_class.cc:
Use my_global.h first
sql/sql_client.cc:
Use my_global.h first
sql/sql_connect.cc:
Use my_global.h first
sql/sql_crypt.cc:
Use my_global.h first
sql/sql_cursor.cc:
Use my_global.h first
sql/sql_db.cc:
Use my_global.h first
sql/sql_delete.cc:
Use my_global.h first
sql/sql_derived.cc:
Use my_global.h first
sql/sql_do.cc:
Use my_global.h first
sql/sql_error.cc:
Use my_global.h first
sql/sql_explain.cc:
Use my_global.h first
sql/sql_expression_cache.cc:
Use my_global.h first
sql/sql_handler.cc:
Use my_global.h first
sql/sql_help.cc:
Use my_global.h first
sql/sql_insert.cc:
Use my_global.h first
sql/sql_lex.cc:
Use my_global.h first
sql/sql_load.cc:
Use my_global.h first
sql/sql_locale.cc:
Use my_global.h first
sql/sql_manager.cc:
Use my_global.h first
sql/sql_parse.cc:
Use my_global.h first
sql/sql_partition.cc:
Use my_global.h first
sql/sql_plugin.cc:
Added comment
sql/sql_prepare.cc:
Use my_global.h first
sql/sql_priv.h:
Added error if we use this before including my_global.h
This check is here becasue so many files includes sql_priv.h first.
sql/sql_profile.cc:
Use my_global.h first
sql/sql_reload.cc:
Use my_global.h first
sql/sql_rename.cc:
Use my_global.h first
sql/sql_repl.cc:
Use my_global.h first
sql/sql_select.cc:
Use my_global.h first
sql/sql_servers.cc:
Use my_global.h first
sql/sql_show.cc:
Added comment
sql/sql_signal.cc:
Use my_global.h first
sql/sql_statistics.cc:
Use my_global.h first
sql/sql_table.cc:
Use my_global.h first
sql/sql_tablespace.cc:
Use my_global.h first
sql/sql_test.cc:
Use my_global.h first
sql/sql_time.cc:
Use my_global.h first
sql/sql_trigger.cc:
Use my_global.h first
sql/sql_udf.cc:
Use my_global.h first
sql/sql_union.cc:
Use my_global.h first
sql/sql_update.cc:
Use my_global.h first
sql/sql_view.cc:
Use my_global.h first
sql/sys_vars.cc:
Added comment
sql/table.cc:
Use my_global.h first
sql/thr_malloc.cc:
Use my_global.h first
sql/transaction.cc:
Use my_global.h first
sql/uniques.cc:
Use my_global.h first
sql/unireg.cc:
Use my_global.h first
sql/unireg.h:
Removed inclusion of my_global.h
storage/archive/ha_archive.cc:
Added comment
storage/blackhole/ha_blackhole.cc:
Use my_global.h first
storage/csv/ha_tina.cc:
Use my_global.h first
storage/csv/transparent_file.cc:
Use my_global.h first
storage/federated/ha_federated.cc:
Use my_global.h first
storage/federatedx/federatedx_io.cc:
Use my_global.h first
storage/federatedx/federatedx_io_mysql.cc:
Use my_global.h first
storage/federatedx/federatedx_io_null.cc:
Use my_global.h first
storage/federatedx/federatedx_txn.cc:
Use my_global.h first
storage/heap/ha_heap.cc:
Use my_global.h first
storage/innobase/handler/handler0alter.cc:
Use my_global.h first
storage/maria/ha_maria.cc:
Use my_global.h first
storage/maria/unittest/ma_maria_log_cleanup.c:
Remove duplicated include files
storage/maria/unittest/test_file.c:
Added comment
storage/myisam/ha_myisam.cc:
Move sql_plugin.h first as this includes my_global.h
storage/myisammrg/ha_myisammrg.cc:
Use my_global.h first
storage/oqgraph/oqgraph_thunk.cc:
Use my_config.h and my_global.h first
One could not include my_global.h before oqgraph_thunk.h (don't know why)
storage/spider/ha_spider.cc:
Use my_global.h first
storage/spider/hs_client/config.cpp:
Use my_global.h first
storage/spider/hs_client/escape.cpp:
Use my_global.h first
storage/spider/hs_client/fatal.cpp:
Use my_global.h first
storage/spider/hs_client/hstcpcli.cpp:
Use my_global.h first
storage/spider/hs_client/socket.cpp:
Use my_global.h first
storage/spider/hs_client/string_util.cpp:
Use my_global.h first
storage/spider/spd_conn.cc:
Use my_global.h first
storage/spider/spd_copy_tables.cc:
Use my_global.h first
storage/spider/spd_db_conn.cc:
Use my_global.h first
storage/spider/spd_db_handlersocket.cc:
Use my_global.h first
storage/spider/spd_db_mysql.cc:
Use my_global.h first
storage/spider/spd_db_oracle.cc:
Use my_global.h first
storage/spider/spd_direct_sql.cc:
Use my_global.h first
storage/spider/spd_i_s.cc:
Use my_global.h first
storage/spider/spd_malloc.cc:
Use my_global.h first
storage/spider/spd_param.cc:
Use my_global.h first
storage/spider/spd_ping_table.cc:
Use my_global.h first
storage/spider/spd_sys_table.cc:
Use my_global.h first
storage/spider/spd_table.cc:
Use my_global.h first
storage/spider/spd_trx.cc:
Use my_global.h first
storage/xtradb/handler/handler0alter.cc:
Use my_global.h first
storage/xtradb/handler/i_s.cc:
Use my_global.h first
We should assume that the store engine will report the first duplicate key for this case.
Old code of suppression of unsafe logging error with LIMIT didn't work, because of wrong usage of my_interval_timer().
Suppress unsafe logging errors to the error log if we get too many unsafe logging errors in a short time.
This is to not overflow the error log with meaningless errors.
- Each error code is suppressed and counted separately.
- We do a 5 minute suppression of new errors if we get more than 10 errors in that time.
Only print unsafe logging errors if log_warnings > 1.
mysql-test/suite/binlog/r/binlog_stm_unsafe_warning.result:
Update test results as INSERT ... ON DUPLICATE KEY UPDATE doesn't get logged anymore
mysql-test/suite/binlog/r/binlog_unsafe.result:
Update test results as INSERT ... ON DUPLICATE KEY UPDATE doesn't get logged anymore
mysql-test/suite/engines/README:
Fixed typos
mysql-test/suite/rpl/r/rpl_known_bugs_detection.result:
Update test results as INSERT ... ON DUPLICATE KEY UPDATE doesn't get logged anymore
sql/sql_base.cc:
Don't log warning if there are two unique keys used with INSERT .. ON DUPLICATE KEY UPDATE.
We should assume that the store engine will report the first duplicate key for this case.
sql/sql_class.cc:
Suppress error in binary log if we get too many unsafe logging errors in a short time.
Only print unsafe logging errors if log_warnings > 1
MDEV-6560 Assertion `! is_set() ' failed in Diagnostics_area::set_ok_status on killing CREATE OR REPLACE
MDEV-6525 Assertion `table->pos_in_locked _tables == __null || table->pos_in_locked_tables->table = table' failed in mark_used_tables_as_free_for_reuse, locking problems and binlogging problems on CREATE OR REPLACE under lock.
mysql-test/r/create_or_replace.result:
Added test for MDEV-6560
mysql-test/t/create_or_replace.test:
Added test for MDEV-6560
mysql-test/valgrind.supp:
Added suppression for OpenSuse 12.3
sql/sql_base.cc:
More DBUG
sql/sql_class.cc:
Changed that thd_sqlcom_can_generate_row_events() does not report that CREATE OR REPLACE is generating row events.
This is safe as this function is only used by InnoDB/XtraDB to check if a query is generating row events as part of another transaction. As CREATE is always run as it's own transaction, this isn't a problem.
This fixed MDEV-6525.
sql/sql_table.cc:
Remember if reopen_tables() generates an error (which can only happen in case of KILL).
This fixed MDEV-6560
Merged lp:maria/maria-10.0-galera up to revision 3880.
Added a new functions to handler API to forcefully abort_transaction,
producing fake_trx_id, get_checkpoint and set_checkpoint for XA. These
were added for future possiblity to add more storage engines that
could use galera replication.
During THD initialization, the value of wsrep_causal_reads (now
being exclusively handled via wsrep_sync_wait, lp:1277053) was
being ignored. Fixed by updating wsrep_sync_wait appropriately.
Merged lp:maria/maria-10.0-galera up to revision 3879.
Added a new functions to handler API to forcefully abort_transaction,
producing fake_trx_id, get_checkpoint and set_checkpoint for XA. These
were added for future possiblity to add more storage engines that
could use galera replication.
bzr merge -r4264 maria/5.5
Text conflict in sql/mysqld.cc
Text conflict in storage/xtradb/btr/btr0cur.c
Text conflict in storage/xtradb/buf/buf0buf.c
Text conflict in storage/xtradb/buf/buf0lru.c
Text conflict in storage/xtradb/handler/ha_innodb.cc
5 conflicts encountered.
~40% bugfixed(*) applied
~40$ bugfixed reverted (incorrect or we're not buggy)
~20% bugfixed applied, despite us being not buggy
(*) only changes in the server code, e.g. not cmakefiles
The bug was that my_real_read() called net_before_header_psi() multiple times for long packets.
Fixed by adding a flag when we are reading a header.
Did also some cleanups to interface of my_net_read() to avoid unnecessary calls if performance schema is not used.
- Added my_net_read_packet() as a replacement for my_net_read(). my_net_read() is still in the client library for old clients.
- Removed THD->m_server_idle (not needed anymore as this is now given as argument to my_net_read_packet()
- Added my_net_read_packet(), which is a new version of my_net_read() with a new parameter if we are doing a read for a new command from the server.
- Added tests for compressed protocol and big packets
include/mysql.h.pp:
Added my_net_read_packet() as a replacement for my_net_read()
include/mysql_com.h:
Added my_net_read_packet() as a replacement for my_net_read()
mysql-test/r/mysql_client_test_comp.result:
New test
mysql-test/t/mysql_client_test-master.opt:
Added max_allowed_packet to be able to test big packets and packet size overflows.
mysql-test/t/mysql_client_test_comp-master.opt:
New test
mysql-test/t/mysql_client_test_nonblock-master.opt:
Added max_allowed_packet to be able to test big packets and packet size overflows.
sql-common/client.c:
Use my_net_read_packet()
sql/mf_iocache.cc:
Use my_net_read_packet()
sql/mysqld.cc:
Removed THD->m_server_idle (not needed anymore as this is now given as argument to my_net_read_packet()
sql/net_serv.cc:
Added argument to my_real_read() to indicte if we are reading the first block of the next statement and should call performance schema.
Added 'compatibilty function' my_net_read().
Added my_net_read_packet(), which is a new version of my_net_read() with a new parameter if we are doing a read for a new command from the server.
sql/sql_class.cc:
Removed m_server_idle (not needed anymore)
sql/sql_class.h:
Removed m_server_idle (not needed anymore)
sql/sql_parse.cc:
Removed m_server_idle (not needed anymore)
tests/mysql_client_test.c:
Added tests for compressed protocol and big packets
After-review changes.
For this patch in 10.0, we do not introduce a new public storage engine API,
we just fix the InnoDB/XtraDB issues. In 10.1, we will make a better public
API that can be used for all storage engines (MDEV-6429).
Eliminate the background thread that did deadlock kills asynchroneously.
Instead, we ensure that the InnoDB/XtraDB code can handle doing the kill from
inside the deadlock detection code (when thd_report_wait_for() needs to kill a
later thread to resolve a deadlock).
(We preserve the part of the original patch that introduces dedicated mutex
and condition for the slave init thread, to remove the abuse of
LOCK_thread_count for start/stop synchronisation of the slave init thread).
The bug was that in some cases, if a replicated transaction was rolled back
due to deadlock, during the subsequent retry of that transaction, the
gtid_slave_pos would _not_ be updated with the new GTID, leaving the GTID
position of the slave incorrect.
Fix this by ensuring during the retry that we clear the flag that marks that
the GTID has already been recorded in gtid_slave_pos, so that the update of
gtid_slave_pos will be done again during the retry.
In the original bug, the symptom was an assertion due to OPTION_GTID_BEGIN not
being cleared during the retry of the transaction. The reason was some code in
handling of a COMMIT query event, which would not clear the flag when not
recording a GTID in gtid_slave_pos. This commit also fixes that code to always
clear the OPTION_GTID_BEGIN flag for clarity, though it is actually not
possible for OPTION_GTID_BEGIN to become set unless a GTID is pending for
update (after fixing the bug described above).
