Conflicts
=========
Text conflict in .bzr-mysql/default.conf
Text conflict in libmysqld/CMakeLists.txt
Text conflict in libmysqld/Makefile.am
Text conflict in mysql-test/collections/default.experimental
Text conflict in mysql-test/extra/rpl_tests/rpl_row_sp006.test
Text conflict in mysql-test/suite/binlog/r/binlog_tmp_table.result
Text conflict in mysql-test/suite/rpl/r/rpl_loaddata.result
Text conflict in mysql-test/suite/rpl/r/rpl_loaddata_fatal.result
Text conflict in mysql-test/suite/rpl/r/rpl_row_create_table.result
Text conflict in mysql-test/suite/rpl/r/rpl_row_sp006_InnoDB.result
Text conflict in mysql-test/suite/rpl/r/rpl_stm_log.result
Text conflict in mysql-test/suite/rpl_ndb/r/rpl_ndb_circular_simplex.result
Text conflict in mysql-test/suite/rpl_ndb/r/rpl_ndb_sp006.result
Text conflict in mysql-test/t/mysqlbinlog.test
Text conflict in sql/CMakeLists.txt
Text conflict in sql/Makefile.am
Text conflict in sql/log_event_old.cc
Text conflict in sql/rpl_rli.cc
Text conflict in sql/slave.cc
Text conflict in sql/sql_binlog.cc
Text conflict in sql/sql_lex.h
21 conflicts encountered.
NOTE
====
mysql-5.1-rpl-merge has been made a mirror of mysql-next-mr:
- "mysql-5.1-rpl-merge$ bzr pull ../mysql-next-mr"
This is the first cset (merge/...) committed after pulling
from mysql-next-mr.
2630.39.1, 2630.28.29, 2630.34.3, 2630.34.2, 2630.34.1, 2630.29.29,
2630.29.28, 2630.31.1, 2630.28.13, 2630.28.10, 2617.23.14 and
some other minor revisions.
This patch implements:
WL#4264 "Backup: Stabilize Service Interface" -- all the
server prerequisites except si_objects.{h,cc} themselves (they can
be just copied over, when needed).
WL#4435: Support OUT-parameters in prepared statements.
(and all issues in the initial patches for these two
tasks, that were discovered in pushbuild and during testing).
Bug#39519: mysql_stmt_close() should flush all data
associated with the statement.
After execution of a prepared statement, send OUT parameters of the invoked
stored procedure, if any, to the client.
When using the binary protocol, send the parameters in an additional result
set over the wire. When using the text protocol, assign out parameters to
the user variables from the CALL(@var1, @var2, ...) specification.
The following refactoring has been made:
- Protocol::send_fields() was renamed to Protocol::send_result_set_metadata();
- A new Protocol::send_result_set_row() was introduced to incapsulate
common functionality for sending row data.
- Signature of Protocol::prepare_for_send() was changed: this operation
does not need a list of items, the number of items is fully sufficient.
The following backward incompatible changes have been made:
- CLIENT_MULTI_RESULTS is now enabled by default in the client;
- CLIENT_PS_MULTI_RESUTLS is now enabled by default in the client.
Use ev_offset instead of 1 as the packet header offset when getting
log position from events for heartbeat
call reset_transmit_packet before calling send_heartbeat_event
CHANGE MASTER TO command required the value for RELAY_LOG_FILE to
be an absolute path, which was different from the requirement of
MASTER_LOG_FILE.
This patch fixed the problem by changing the value for RELAY_LOG_FILE
to be the basename of the log file as that for MASTER_LOG_FILE.
NOTE: Backporting the patch to next-mr.
The fix proposed in BUG#35542 and BUG#31665 introduces a performance issue
when fsyncing the master.info, relay.info and relay-log.bin* after #th events.
Although such solution has been proposed to reduce the probability of corrupted
files due to a slave-crash, the performance penalty introduced by it has
made the approach impractical for highly intensive workloads.
In a nutshell, the option --syn-relay-log proposed in BUG#35542 and BUG#31665
simultaneously fsyncs master.info, relay-log.info and relay-log.bin* and
this is the main source of performance issues.
This patch introduces new options that give more control to the user on
what should be fsynced and how often:
1) (--sync-master-info, integer) which syncs the master.info after #th event;
2) (--sync-relay-log, integer) which syncs the relay-log.bin* after #th
events.
3) (--sync-relay-log-info, integer) which syncs the relay.info after #th
transactions.
To provide both performance and increased reliability, we recommend the following
setup:
1) --sync-master-info = 0 eventually the operating system will fsync it;
2) --sync-relay-log = 0 eventually the operating system will fsync it;
3) --sync-relay-log-info = 1 fsyncs it after every transaction;
Notice, that the previous setup does not reduce the probability of
corrupted master.info and relay-log.bin*. To overcome the issue, this patch also
introduces a recovery mechanism that right after restart throws away relay-log.bin*
retrieved from a master and updates the master.info based on the relay.info:
4) (--relay-log-recovery, boolean) which enables a recovery mechanism that
throws away relay-log.bin* after a crash.
However, it can only recover the incorrect binlog file and position in master.info,
if other informations (host, port password, etc) are corrupted or incorrect,
then this recovery mechanism will fail to work.
BUG#31665 sync_binlog should cause relay logs to be synchronized
NOTE: Backporting the patch to next-mr.
Add sync_relay_log option to server, this option works for relay log
the same as option sync_binlog for binlog. This option also synchronize
master info to disk when set to non-zero value.
Original patches from Sinisa and Mark, with some modifications
NOTE: this is the backport to next-mr.
This patch addresses the bug reported by checking wether
host argument is an empty string or not. If empty, an error is
reported to the client, otherwise continue normally.
This commit is based on the originally proposed patch and adds
a test case as requested during review as well as refines comments,
and makes test case result file less verbose (compared to previous patch).
files
NOTE: this is the backport to next-mr.
SHOW BINLOG EVENTS does not work with relay log files. If issuing
"SHOW BINLOG EVENTS IN 'relay-log.000001'" in a non-empty relay
log file (relay-log.000001), mysql reports empty set.
This patch addresses this issue by extending the SHOW command
with RELAYLOG. Events in relay log files can now be inspected by
issuing SHOW RELAYLOG EVENTS [IN 'log_name'] [FROM pos] [LIMIT
[offset,] row_count].
But there is no Last_IO_Error reported.
On the master, if a binary log event is larger than max_allowed_packet,
ER_MASTER_FATAL_ERROR_READING_BINLOG and the specific reason of this error is
sent to a slave when it requests a dump from the master, thus leading
the I/O thread to stop.
On a slave, the I/O thread stops when receiving a packet larger than max_allowed_packet.
In both cases, however, there was no Last_IO_Error reported.
This patch adds code to report the Last_IO_Error and exact reason before stopping the
I/O thread and also reports the case the out memory pops up while
handling packets from the master.
procedures causes crashes!
The problem of that bugreport was mostly fixed by the
patch for bug 38691.
However, attached test case focused on another crash or
valgrind warning problem: SHOW PROCESSLIST query accesses
freed memory of SP instruction that run in a parallel
connection.
Changes of thd->query/thd->query_length in dangerous
places have been guarded with the per-thread
LOCK_thd_data mutex (the THD::LOCK_delete mutex has been
renamed to THD::LOCK_thd_data).
NOTE: This undoes changes by BUG#42829 in sql_class.cc:binlog_query().
I will revert the change in a post-push fix (the binlog filter should
be checked in sql_base.cc:decide_logging_format()).
General overview:
The logic for switching to row format when binlog_format=MIXED had
numerous flaws. The underlying problem was the lack of a consistent
architecture.
General purpose of this changeset:
This changeset introduces an architecture for switching to row format
when binlog_format=MIXED. It enforces the architecture where it has
to. It leaves some bugs to be fixed later. It adds extensive tests to
verify that unsafe statements work as expected and that appropriate
errors are produced by problems with the selection of binlog format.
It was not practical to split this into smaller pieces of work.
Problem 1:
To determine the logging mode, the code has to take several parameters
into account (namely: (1) the value of binlog_format; (2) the
capabilities of the engines; (3) the type of the current statement:
normal, unsafe, or row injection). These parameters may conflict in
several ways, namely:
- binlog_format=STATEMENT for a row injection
- binlog_format=STATEMENT for an unsafe statement
- binlog_format=STATEMENT for an engine only supporting row logging
- binlog_format=ROW for an engine only supporting statement logging
- statement is unsafe and engine does not support row logging
- row injection in a table that does not support statement logging
- statement modifies one table that does not support row logging and
one that does not support statement logging
Several of these conflicts were not detected, or were detected with
an inappropriate error message. The problem of BUG#39934 was that no
appropriate error message was written for the case when an engine
only supporting row logging executed a row injection with
binlog_format=ROW. However, all above cases must be handled.
Fix 1:
Introduce new error codes (sql/share/errmsg.txt). Ensure that all
conditions are detected and handled in decide_logging_format()
Problem 2:
The binlog format shall be determined once per statement, in
decide_logging_format(). It shall not be changed before or after that.
Before decide_logging_format() is called, all information necessary to
determine the logging format must be available. This principle ensures
that all unsafe statements are handled in a consistent way.
However, this principle is not followed:
thd->set_current_stmt_binlog_row_based_if_mixed() is called in several
places, including from code executing UPDATE..LIMIT,
INSERT..SELECT..LIMIT, DELETE..LIMIT, INSERT DELAYED, and
SET @@binlog_format. After Problem 1 was fixed, that caused
inconsistencies where these unsafe statements would not print the
appropriate warnings or errors for some of the conflicts.
Fix 2:
Remove calls to THD::set_current_stmt_binlog_row_based_if_mixed() from
code executed after decide_logging_format(). Compensate by calling the
set_current_stmt_unsafe() at parse time. This way, all unsafe statements
are detected by decide_logging_format().
Problem 3:
INSERT DELAYED is not unsafe: it is logged in statement format even if
binlog_format=MIXED, and no warning is printed even if
binlog_format=STATEMENT. This is BUG#45825.
Fix 3:
Made INSERT DELAYED set itself to unsafe at parse time. This allows
decide_logging_format() to detect that a warning should be printed or
the binlog_format changed.
Problem 4:
LIMIT clause were not marked as unsafe when executed inside stored
functions/triggers/views/prepared statements. This is
BUG#45785.
Fix 4:
Make statements containing the LIMIT clause marked as unsafe at
parse time, instead of at execution time. This allows propagating
unsafe-ness to the view.
The server was not cleaning the last IO error and error number when
resetting slave.
This patch addresses this issue by backporting into 5.1 part of the
patch in BUG 34654. A fix for this issue had already been pushed into
6.0 as part of the aforementioned bug, however the patch also included
some refactoring. The fix for 5.1 does not take into account the
refactoring part.
my_error() was invoked in reset_slave()'s with purge_relay_logs()-failing branch
without passing sql_errno to it.
Fixed with setting sql_errno= ER_RELAY_LOG_FAIL in the purge_relay_logs()-failing branch.
- Remove bothersome warning messages. This change focuses on the warnings
that are covered by the ignore file: support-files/compiler_warnings.supp.
- Strings are guaranteed to be max uint in length
- Remove bothersome warning messages. This change focuses on the warnings
that are covered by the ignore file: support-files/compiler_warnings.supp.
- Strings are guaranteed to be max uint in length
conflicts:
Text conflict in client/mysqltest.cc
Text conflict in mysql-test/include/wait_until_connected_again.inc
Text conflict in mysql-test/lib/mtr_report.pm
Text conflict in mysql-test/mysql-test-run.pl
Text conflict in mysql-test/r/events_bugs.result
Text conflict in mysql-test/r/log_state.result
Text conflict in mysql-test/r/myisam_data_pointer_size_func.result
Text conflict in mysql-test/r/mysqlcheck.result
Text conflict in mysql-test/r/query_cache.result
Text conflict in mysql-test/r/status.result
Text conflict in mysql-test/suite/binlog/r/binlog_index.result
Text conflict in mysql-test/suite/binlog/r/binlog_innodb.result
Text conflict in mysql-test/suite/rpl/r/rpl_packet.result
Text conflict in mysql-test/suite/rpl/t/rpl_packet.test
Text conflict in mysql-test/t/disabled.def
Text conflict in mysql-test/t/events_bugs.test
Text conflict in mysql-test/t/log_state.test
Text conflict in mysql-test/t/myisam_data_pointer_size_func.test
Text conflict in mysql-test/t/mysqlcheck.test
Text conflict in mysql-test/t/query_cache.test
Text conflict in mysql-test/t/rpl_init_slave_func.test
Text conflict in mysql-test/t/status.test
Several system variables did not behave like system variables should do.
When trying to SET them or use them in SELECT, they were reported as
"unknown system variable". But they appeared in SHOW VARIABLES.
This has been fixed by removing the "fixed_vars" array of variables
and integrating the variables into the normal system variables chain.
All of these variables do now behave as read-only global-only
variables. Trying to SET them tells they are read-only, trying to
SELECT the session value tells they are global only. Selecting the
global value works. It delivers the same value as SHOW VARIABLES.
Rotate event is automatically generated and written when rotating binary
log or relay log. Rotate events for relay logs are usually ignored by slave
SQL thread becuase they have the same server id as that of the slave.
However, if --replicate-same-server-id is enabled, rotate event
for relay log would be treated as if it's a rotate event from master, and
would be executed by slave to update the rli->group_master_log_name and
rli->group_master_log_pos to a wrong value and cause the MASTER_POS_WAIT
function to fail and return NULL.
This patch fixed this problem by setting a flag bit (LOG_EVENT_RELAY_LOG_F)
in the event to tell the SQL thread to ignore these Rotate events generated
for relay logs.
This patch also added another binlog event flag bit (LOG_EVENT_ARTIFICIAL_F)
to distinquish faked events, the method used before this was by checking if
log_pos was zero.
exists t1,t2,t3'
Bug #34245 Test ndb_binlog_multi fails for 'CREATE TABLE'
Bug #34246 Test rpl_ndb_transaction fails with 'Failed to create
'mysql/ndb_apply_status'
Tests cases didn't wait for cluster to come up due to a typo
in have_multi_ndb.inc.
