As reported in MDEV-11969 "there's no way to ditch knowledge" about some
domain that is no longer updated on a server. Besides being of annoyance to
clutter output in DBA console stale domains can prevent the slave
to connect the master as MDEV-12012 witnesses.
What domain is obsolete must be evaluated by the user (DBA) according
to whether the domain info is still relevant and will the domain ever
receive any update.
This patch introduces a method to discard obsolete gtid domains from
the server binlog state. The removal requires no event group from such
domain present in existing binlog files though. If there are any the
containing logs must be first PURGEd in order for
FLUSH BINARY LOGS DELETE_DOMAIN_ID=(list-of-domains)
succeed. Otherwise the command returns an error.
The list of obsolete domains can be computed through
intersecting two sets - the earliest (first) binlog's Gtid_list
and the current value of @@global.gtid_binlog_state - and extracting
the domain id components from the intersection list items.
The new DELETE_DOMAIN_ID featured FLUSH continues to rotate binlog
omitting the deleted domains from the active binlog file's Gtid_list.
Notice though when the command is ineffective - that none of requested to delete
domain exists in the binlog state - rotation does not occur.
Obsolete domain deletion is not harmful for connected slaves as long
as master side binlog files *purge* is synchronized with FLUSH-DELETE_DOMAIN_ID.
The slaves must have the last event from purged files processed as usual,
in order not to bump later into requesting a gtid from a file which
was already gone.
While the command is not replicated (as ordinary FLUSH BINLOG LOGS is)
slaves, even though having extra domains, won't suffer from reconnection errors
thanks to master-slave gtid connection protocol allowing the master
to be ignorant about a gtid domain.
Should at failover such slave to be promoted into master role it may run
the ex-master's
FLUSH BINARY LOGS DELETE_DOMAIN_ID=(list-of-domains)
to clean its own binlog state.
NOTES.
suite/perfschema/r/start_server_low_digest.result
is re-recorded as consequence of internal parser codes changes.
A reference to a CTE may occur not in the master of the CTE
specification. In this case if the reference to the CTE is
the first one the specification should be detached from its
master and attached to the referencing select.
Also fixed the TYPE column in the lines of the EXPLAIN output
created for CTE tables.
It allows to push conditions into derived with window functions not
only in the cases when the window specifications of these window
functions use the same partition, but also in the cases when the window
functions use partitions that share only some fields. In these
cases only the conditions over the common fields are pushed.
with window functions (mdev-10855).
This patch just modified the function pushdown_cond_for_derived()
to support this feature.
Some test cases demonstrating this optimization were added to
derived_cond_pushdown.test.
"Optimization for equi-joins of derived tables with GROUP BY"
should be considered rather as a 'proof of concept'.
The task itself is targeted at an optimization that employs re-writing
equi-joins with grouping derived tables / views into lateral
derived tables. Here's an example of such transformation:
select t1.a,t.max,t.min
from t1 [left] join
(select a, max(t2.b) max, min(t2.b) min from t2
group by t2.a) as t
on t1.a=t.a;
=>
select t1.a,tl.max,tl.min
from t1 [left] join
lateral (select a, max(t2.b) max, min(t2.b) min from t2
where t1.a=t2.a) as t
on 1=1;
The transformation pushes the equi-join condition t1.a=t.a into the
derived table making it dependent on table t1. It means that for
every row from t1 a new derived table must be filled out. However
the size of any of these derived tables is just a fraction of the
original derived table t. One could say that transformation 'splits'
the rows used for the GROUP BY operation into separate groups
performing aggregation for a group only in the case when there is
a match for the current row of t1.
Apparently the transformation may produce a query with a better
performance only in the case when
- the GROUP BY list refers only to fields returned by the derived table
- there is an index I on one of the tables T used in FROM list of
the specification of the derived table whose prefix covers the
the fields from the proper beginning of the GROUP BY list or
fields that are equal to those fields.
Whether the result of the re-writing can be executed faster depends
on many factors:
- the size of the original derived table
- the size of the table T
- whether the index I is clustering for table T
- whether the index I fully covers the GROUP BY list.
This patch only tries to improve the chosen execution plan using
this transformation. It tries to do it only when the chosen
plan reaches the derived table by a key whose prefix covers
all the fields of the derived table produced by the fields of
the table T from the GROUP BY list.
The code of the patch does not evaluates the cost of the improved
plan. If certain conditions are met the transformation is applied.
This patch fills in a serious flaw in the
code that supports condition pushdown into
materialized views / derived tables.
If a predicate happened to contain a reference
to a mergeable view / derived table and it does
not depended directly on the target materialized
view / derived table then the predicate was not
considered as a subject to pusdown to this view
/ derived table.
This is another attempt to fix the bug mdev-12992.
This patch introduces st_select_lex::context_analysis_place for
the place in SELECT where context analysis is currently performed.
It's similar to st_select_lex::parsing_place, but it is used at
the preparation stage.
Significantly reduce the amount of InnoDB, XtraDB and Mariabackup
code changes by defining pfs_os_file_t as something that is
transparently compatible with os_file_t.
Introducing a new class Type_holder (used internally in sql_union.cc),
to reuse exactly the same data type attribute aggregation Type_handler API
for hybrid functions and UNION.
This fixes a number of bugs in UNION:
- MDEV-9495 Wrong field type for a UNION of a signed and an unsigned INT expression
- MDEV-9497 UNION and COALESCE produce different field types for DECIMAL+INT
- MDEV-12594 UNION between fixed length double columns does not always preserve scale
- MDEV-12595 UNION converts INT to BIGINT
- MDEV-12599 UNION is not symmetric when mixing INT and CHAR
Details:
- sql_union.cc: Reusing attribute aggregation for UNION.
Adding new methods:
* st_select_lex_unit::join_union_type_handlers()
* st_select_lex_unit::join_union_type_attributes()
* st_select_lex_unit::join_union_item_types()
Removing the old join_types()-based code.
- Changing Type_handler::Item_hybrid_func_fix_attributes()
to accept "name", Type_handler_hybrid_field_type, Type_all_attributes
as three separate parameters instead of a single Item_hybrid_func parameter,
to make it possible to pass both Item_hybrid_func and Type_holder.
- Moving the former special GEOMETRY and ENUM/SET attribute aggregation code
from Item_type_holder::join_types() to
* Type_handler_typelib::Item_hybrid_func_fix_attributes().
* Type_handler_geometry::Item_hybrid_func_fix_attrubutes().
This makes GEOMETRY/ENUM/SET symmetric with all other data types
(from the UNION point of view).
Removing Item_type_holder::join_types() and Item_type_holder::get_full_info().
- Adding new methods into Type_all_attributes:
* Type_all_attributes::set_geometry_type() and
Item_hybrid_func::set_geometry_type().
* Adding Type_all_attributes::get_typelib().
* Adding Type_all_attributes::set_typelib().
- Adding Type_handler_typelib as a common parent for
Type_handler_enum and Type_handler_set, to avoid code duplication: they have
already had two common methods, and we're adding one more shared method.
- Adding Type_all_attributes::set_maybe_null(), as some type handlers
may want to set maybe_null (e.g. Type_handler_geometry) during data type
attribute aggregation.
- Changing Type_geometry_attributes() to accept Type_handler
and Type_all_attributes as two separate parameters, instead
of a single Item parameter, to make it possible to pass Type_holder.
- Adding Item_args::add_argument().
- Moving Item_args::alloc_arguments() from "protected" to "public".
- Moving Item_type_holder::Item_type_holder() from item.cc to item.h, as
now it's very simple.
Btw, this constructor should probably be eventually removed.
It's now used only in sql_show.cc, which could be modified to use
Item_return_decimal (for symmetry with Item_return_xxx created for all
other data types). Or, another option: remove all Item_return_xxx and
use Item_type_holder for all data types instead.
- storage/tokudb/mysql-test/tokudb/r/type_float.result
Recording new results (MDEV-12594).
- mysql-test/r/cte_recursive.result
Recording new results (MDEV-9497)
- mysql-test/r/subselect*.result
Recording new results (MDEV-12595)
- mysql-test/r/metadata.result
Recording new results (MDEV-9495)
- mysql-test/r/temp_table.result
Recording new results (MDEV-12594)
- mysql-test/r/type_float.result
Recording new results (MDEV-12594)
At some conditions the function opt_sum_query() can apply MIN/MAX
optimizations to to Item_sum objects of a select These optimizations
becomes invalid if this select is the subquery of an IN subquery
predicate that is converted to a EXISTS subquery. Thus in this case
the MIX/MAX optimizations that have been applied in opt_sum_query()
must be rolled back.
This bug appeared in 5.3 when the code for the cost base choice between
materialization and in-to-exists transformation of non-correlated
IN subqueries was introduced. Before this code in-to-exists
transformations were always performed before the call of opt_sum_query().
- SETVAL(sequence_name, next_value, is_used, round)
- ALTER SEQUENCE, including RESTART WITH
Other things:
- Added handler::extra() option HA_EXTRA_PREPARE_FOR_ALTER_TABLE to signal
ha_sequence() that it should allow write_row statments.
- ALTER ONLINE TABLE now works with SEQUENCE:s
Benefits of this patch:
- Removed a lot of calls to strlen(), especially for field_string
- Strings generated by parser are now const strings, less chance of
accidently changing a string
- Removed a lot of calls with LEX_STRING as parameter (changed to pointer)
- More uniform code
- Item::name_length was not kept up to date. Now fixed
- Several bugs found and fixed (Access to null pointers,
access of freed memory, wrong arguments to printf like functions)
- Removed a lot of casts from (const char*) to (char*)
Changes:
- This caused some ABI changes
- lex_string_set now uses LEX_CSTRING
- Some fucntions are now taking const char* instead of char*
- Create_field::change and after changed to LEX_CSTRING
- handler::connect_string, comment and engine_name() changed to LEX_CSTRING
- Checked printf() related calls to find bugs. Found and fixed several
errors in old code.
- A lot of changes from LEX_STRING to LEX_CSTRING, especially related to
parsing and events.
- Some changes from LEX_STRING and LEX_STRING & to LEX_CSTRING*
- Some changes for char* to const char*
- Added printf argument checking for my_snprintf()
- Introduced null_clex_str, star_clex_string, temp_lex_str to simplify
code
- Added item_empty_name and item_used_name to be able to distingush between
items that was given an empty name and items that was not given a name
This is used in sql_yacc.yy to know when to give an item a name.
- select table_name."*' is not anymore same as table_name.*
- removed not used function Item::rename()
- Added comparision of item->name_length before some calls to
my_strcasecmp() to speed up comparison
- Moved Item_sp_variable::make_field() from item.h to item.cc
- Some minimal code changes to avoid copying to const char *
- Fixed wrong error message in wsrep_mysql_parse()
- Fixed wrong code in find_field_in_natural_join() where real_item() was
set when it shouldn't
- ER_ERROR_ON_RENAME was used with extra arguments.
- Removed some (wrong) ER_OUTOFMEMORY, as alloc_root will already
give the error.
TODO:
- Check possible unsafe casts in plugin/auth_examples/qa_auth_interface.c
- Change code to not modify LEX_CSTRING for database name
(as part of lower_case_table_names)
Working features:
CREATE OR REPLACE [TEMPORARY] SEQUENCE [IF NOT EXISTS] name
[ INCREMENT [ BY | = ] increment ]
[ MINVALUE [=] minvalue | NO MINVALUE ]
[ MAXVALUE [=] maxvalue | NO MAXVALUE ]
[ START [ WITH | = ] start ] [ CACHE [=] cache ] [ [ NO ] CYCLE ]
ENGINE=xxx COMMENT=".."
SELECT NEXT VALUE FOR sequence_name;
SELECT NEXTVAL(sequence_name);
SELECT PREVIOUS VALUE FOR sequence_name;
SELECT LASTVAL(sequence_name);
SHOW CREATE SEQUENCE sequence_name;
SHOW CREATE TABLE sequence_name;
CREATE TABLE sequence-structure ... SEQUENCE=1
ALTER TABLE sequence RENAME TO sequence2;
RENAME TABLE sequence TO sequence2;
DROP [TEMPORARY] SEQUENCE [IF EXISTS] sequence_names
Missing features
- SETVAL(value,sequence_name), to be used with replication.
- Check replication, including checking that sequence tables are marked
not transactional.
- Check that a commit happens for NEXT VALUE that changes table data (may
already work)
- ALTER SEQUENCE. ANSI SQL version of setval.
- Share identical sequence entries to not add things twice to table list.
- testing insert/delete/update/truncate/load data
- Run and fix Alibaba sequence tests (part of mysql-test/suite/sql_sequence)
- Write documentation for NEXT VALUE / PREVIOUS_VALUE
- NEXTVAL in DEFAULT
- Ensure that NEXTVAL in DEFAULT uses database from base table
- Two NEXTVAL for same row should give same answer.
- Oracle syntax sequence_table.nextval, without any FOR or FROM.
- Sequence tables are treated as 'not read constant tables' by SELECT; Would
be better if we would have a separate list for sequence tables so that
select doesn't know about them, except if refereed to with FROM.
Other things done:
- Improved output for safemalloc backtrack
- frm_type_enum changed to Table_type
- Removed lex->is_view and replaced with lex->table_type. This allows
use to more easy check if item is view, sequence or table.
- Added table flag HA_CAN_TABLES_WITHOUT_ROLLBACK, needed for handlers
that want's to support sequences
- Added handler calls:
- engine_name(), to simplify getting engine name for partition and sequences
- update_first_row(), to be able to do efficient sequence implementations.
- Made binlog_log_row() global to be able to call it from ha_sequence.cc
- Added handler variable: row_already_logged, to be able to flag that the
changed row is already logging to replication log.
- Added CF_DB_CHANGE and CF_SCHEMA_CHANGE flags to simplify
deny_updates_if_read_only_option()
- Added sp_add_cfetch() to avoid new conflicts in sql_yacc.yy
- Moved code for add_table_options() out from sql_show.cc::show_create_table()
- Added String::append_longlong() and used it in sql_show.cc to simplify code.
- Added extra option to dd_frm_type() and ha_table_exists to indicate if
the table is a sequence. Needed by DROP SQUENCE to not drop a table.
Implementing cursor%ROWTYPE variables, according to the task description.
This patch includes a refactoring in how sp_instr_cpush and sp_instr_copen
work. This is needed to implement MDEV-10598 later easier, to allow variable
declarations go after cursor declarations (which is currently not allowed).
Before this patch, sp_instr_cpush worked as a Query_arena associated with
the cursor. sp_instr_copen::execute() switched to the sp_instr_cpush's
Query_arena when executing the cursor SELECT statement.
Now the Query_arena associated with the cursor is stored inside an instance
of a new class sp_lex_cursor (a LEX descendand) that contains the cursor SELECT
statement.
This simplifies the implementation, because:
- It's easier to follow the code when everything related to execution
of the cursor SELECT statement is stored inside the same sp_lex_cursor
object (rather than distributed between LEX and sp_instr_cpush).
- It's easier to link an sp_instr_cursor_copy_struct to
sp_lex_cursor rather than to sp_instr_cpush.
- Also, it allows to perform sp_instr_cursor_copy_struct::exec_core()
without having a pointer to sp_instr_cpush, using a pointer to sp_lex_cursor
instead. This will be important for MDEV-10598, because sp_instr_cpush will
happen *after* sp_instr_cursor_copy_struct.
After MDEV-10598 is done, this declaration:
DECLARE
CURSOR cur IS SELECT * FROM t1;
rec cur%ROWTYPE;
BEGIN
OPEN cur;
FETCH cur INTO rec;
CLOSE cur;
END;
will generate about this code:
+-----+--------------------------+
| Pos | Instruction |
+-----+--------------------------+
| 0 | cursor_copy_struct rec@0 | Points to sp_cursor_lex through m_lex_keeper
| 1 | set rec@0 NULL |
| 2 | cpush cur@0 | Points to sp_cursor_lex through m_lex_keeper
| 3 | copen cur@0 | Points to sp_cursor_lex through m_cursor
| 4 | cfetch cur@0 rec@0 |
| 5 | cclose cur@0 |
| 6 | cpop 1 |
+-----+--------------------------+
Notice, "cursor_copy_struct" and "set" will go before "cpush".
Instructions at positions 0, 2, 3 point to the same sp_cursor_lex instance.
