Before this, FLUSH TABLES and FLUSH TABLES t1 (REFRESH_TABLES hereafter) were executed locally,
which also had implications for GTID. MySQL async replication does
replicate FLUSH TABLES.
Hence, this commit
a) Adds REFRESH_TABLES to TOI.
b) Skips LOCK-based REFRESH_TABLES from TOI, ie. FLUSH TABLES WITH READ
LOCK and FLUSH TABLES FOR EXPORT.
c) Executes them after reload_acl_and_cache. This is done since
reload_acl_and_cache checks for thd->locked_tables_mode and does upgrade
of MDL locks accordingly. A failure here means REFRESH_TABLES cannot
run.
i) This is also important since LOCK TABLES is not replicated in
galera.
d) Test galera_flush has been modified for
i) wsrep_replicate_myisam SESSION variable.
ii) Testing REFRESH_TABLES.
iii) Testing REFRESH_TABLES + LOCK TABLES.
e) Use different WSREP_TO_ISOLATION_BEGIN for global FLUSH TABLES and FLUSH TABLES <table,>.
In galera cluster, when myisam replication is enabled
(wsrep_replicate_myisam=ON), DML statements are replicated
in open_tables(). However, in case of prepared statements,
for an INSERT, open_tables() gets invoked twice. Once for
COM_STMT_PREPARE (to validate and prepare INSERT) and later
for COM_STMT_EXECUTE. As a result, the command gets replicated
twice. Same happens for REPLACE, UPDATE and DELETE commands.
Fixed by adding a check to not replicate during 'prepare'
phase. Also changed the order of conditions to make it more
efficient. Lastly, in order to support wsrep_dirty_reads, made
changes to allow COM_STMT_XXX commands to continue past initial
check even when wsrep is not ready.
RENAME TABLE, unlike other DDLs, was getting replicated before
the access check was performed. As a result, the command could
get get replicated and thus executed on other nodes, even if it
fails on the originating node due to permission issues. Fixed by
moving the logic to check user privileges before replicating the
command.
THD::>save_prep_leaf_list was set to true by multi-table update
statements with mergeable selects and never reset.
Make every statement reset it at start.
THD::>save_prep_leaf_list was set to true by multi-table update
statements with mergeable selects and never reset.
Make every statement reset it at start.
[Attempt #] Make the code that handles "Prepare" phase for multi-table
UPDATE statements handle non-merged semijoins. It can encounter them when
a prepared statement is executed for the second time.
1. factored XID-related functions to a separate wsrep_xid.cc unit.
2. refactored them to take refrences instead of pointers where appropriate
3. implemented wsrep_get/set_SE_position to take wsrep_uuid_t and wsrep_seqno_t instead of XID
4. call wsrep_set_SE_position() in wsrep_sst_received() to reinitialize SE checkpoint after SST was received, avoid assert() in setting code by first checking current position.
The following FLUSH commands are now executed under total
order isolation:
* FLUSH DES_KEY_FILE
* FLUSH HOSTS
* FLUSH PRIVILEGES
* FLUSH QUERY CACHE
* FLUSH STATUS
* FLUSH USER_RESOURCES
including the big commit
commit 305130361bf72726de220f3d2b2787395e10be61
Author: Marc Alff <marc.alff@oracle.com>
Date: Tue Feb 10 11:31:32 2015 +0100
WL#8354 BACKPORT DIGEST IMPROVEMENTS TO MYSQL 5.6
(with the following commits) and related changes in sql/
The following FLUSH commands are now executed under total
order isolation:
* FLUSH DES_KEY_FILE
* FLUSH HOSTS
* FLUSH PRIVILEGES
* FLUSH QUERY CACHE
* FLUSH STATUS
* FLUSH USER_RESOURCES
This patch was backported from mysql-wsrep/5.6 commit
cdea608d9a27701d76d0deec49976aa0a08b1a56
sql/sql_parse.cc: In function 'bool do_command(THD*)':
sql/sql_parse.cc:758:20: error: 'packet_length' may be used uninitialized in this function [-Werror=maybe-uninitialized]
if ((WSREP(thd) && packet_length == packet_error) ||
[
Added a SESSION-only system variable "wsrep_dirty_reads" to allow SELECT
queries to pass even when the node is not prepared to accept queries
(wsrep_ready=OFF). Added a test case.
Added a SESSION-only system variable "wsrep_dirty_reads" to allow SELECT
queries to pass even when the node is not prepared to accept queries
(wsrep_ready=OFF). Added a test case.
mysql-test/r/kill-2.result:
test case for MDEV-6896
mysql-test/t/kill-2-master.opt:
test case for MDEV-6896
mysql-test/t/kill-2.test:
test case for MDEV-6896
sql/sql_parse.cc:
Use host_or_ip instead of host as host may be 0
1. Do not use NULL `info' field in processlist to select the thread of
interest. This can fail if the read of processlist ends up happening after
REAP succeeds, but before the `info' field is reset. Instead, select on the
CONNECTION_ID(), making sure we still scan the whole list to trigger the same
code as in the original test case.
2. Wait for the query to really complete before reading it in the
processlist. When REAP returns, it only means that ack has been sent to
client, the reset of query stage happens a bit later in the code.
SQLCOM_ASSIGN_TO_KEYCACHE should not be CF_AUTO_COMMIT_TRANS
SQLCOM_PRELOAD_KEYS should not be CF_AUTO_COMMIT_TRANS
SQLCOM_INSTALL_PLUGIN should need CF_AUTO_COMMIT_TRANS
SQLCOM_UNINSTALL_PLUGIN should need CF_AUTO_COMMIT_TRANS
merge from MySQL-5.6, revision:
revno: 3677.2.1
committer: Alfranio Correia <alfranio.correia@oracle.com>
timestamp: Tue 2012-02-28 16:26:37 +0000
message:
BUG#13627921 - MISSING FLAGS IN SQL_COMMAND_FLAGS MAY LEAD TO REPLICATION PROBLEMS
Flags in sql_command_flags[command] are not correctly set for the following
commands:
. SQLCOM_SET_OPTION is missing CF_CAN_GENERATE_ROW_EVENTS;
. SQLCOM_BINLOG_BASE64_EVENT is missing CF_CAN_GENERATE_ROW_EVENTS;
. SQLCOM_REVOKE_ALL is missing CF_CHANGES_DATA;
. SQLCOM_CREATE_FUNCTION is missing CF_AUTO_COMMIT_TRANS;
This may lead to a wrong sequence of events in the binary log. To fix
the problem, we correctly set the flags in sql_command_flags[command].
The reason for the failure was a bug in an include file on debian that causes 'struct stat'
to have different sized depending on the environment.
This patch fixes so that we always include my_global.h or my_config.h before we include any other files.
Other things:
- Removed #include <my_global.h> in some include files; Better to always do this at the top level to have as few
"always-include-this-file-first' files as possible.
- Removed usage of some include files that where already included by my_global.h or by other files.
client/mysql_plugin.c:
Use my_global.h first
client/mysqlslap.c:
Remove duplicated include files
extra/comp_err.c:
Remove duplicated include files
include/m_string.h:
Remove duplicated include files
include/maria.h:
Remove duplicated include files
libmysqld/emb_qcache.cc:
Use my_global.h first
plugin/semisync/semisync.h:
Use my_pthread.h first
sql/datadict.cc:
Use my_global.h first
sql/debug_sync.cc:
Use my_global.h first
sql/derror.cc:
Use my_global.h first
sql/des_key_file.cc:
Use my_global.h first
sql/discover.cc:
Use my_global.h first
sql/event_data_objects.cc:
Use my_global.h first
sql/event_db_repository.cc:
Use my_global.h first
sql/event_parse_data.cc:
Use my_global.h first
sql/event_queue.cc:
Use my_global.h first
sql/event_scheduler.cc:
Use my_global.h first
sql/events.cc:
Use my_global.h first
sql/field.cc:
Use my_global.h first
Remove duplicated include files
sql/field_conv.cc:
Use my_global.h first
sql/filesort.cc:
Use my_global.h first
Remove duplicated include files
sql/gstream.cc:
Use my_global.h first
sql/ha_ndbcluster.cc:
Use my_global.h first
sql/ha_ndbcluster_binlog.cc:
Use my_global.h first
sql/ha_ndbcluster_cond.cc:
Use my_global.h first
sql/ha_partition.cc:
Use my_global.h first
sql/handler.cc:
Use my_global.h first
sql/hash_filo.cc:
Use my_global.h first
sql/hostname.cc:
Use my_global.h first
sql/init.cc:
Use my_global.h first
sql/item.cc:
Use my_global.h first
sql/item_buff.cc:
Use my_global.h first
sql/item_cmpfunc.cc:
Use my_global.h first
sql/item_create.cc:
Use my_global.h first
sql/item_geofunc.cc:
Use my_global.h first
sql/item_inetfunc.cc:
Use my_global.h first
sql/item_row.cc:
Use my_global.h first
sql/item_strfunc.cc:
Use my_global.h first
sql/item_subselect.cc:
Use my_global.h first
sql/item_sum.cc:
Use my_global.h first
sql/item_timefunc.cc:
Use my_global.h first
sql/item_xmlfunc.cc:
Use my_global.h first
sql/key.cc:
Use my_global.h first
sql/lock.cc:
Use my_global.h first
sql/log.cc:
Use my_global.h first
sql/log_event.cc:
Use my_global.h first
sql/log_event_old.cc:
Use my_global.h first
sql/mf_iocache.cc:
Use my_global.h first
sql/mysql_install_db.cc:
Remove duplicated include files
sql/mysqld.cc:
Remove duplicated include files
sql/net_serv.cc:
Remove duplicated include files
sql/opt_range.cc:
Use my_global.h first
sql/opt_subselect.cc:
Use my_global.h first
sql/opt_sum.cc:
Use my_global.h first
sql/parse_file.cc:
Use my_global.h first
sql/partition_info.cc:
Use my_global.h first
sql/procedure.cc:
Use my_global.h first
sql/protocol.cc:
Use my_global.h first
sql/records.cc:
Use my_global.h first
sql/records.h:
Don't include my_global.h
Better to do this at the upper level
sql/repl_failsafe.cc:
Use my_global.h first
sql/rpl_filter.cc:
Use my_global.h first
sql/rpl_gtid.cc:
Use my_global.h first
sql/rpl_handler.cc:
Use my_global.h first
sql/rpl_injector.cc:
Use my_global.h first
sql/rpl_record.cc:
Use my_global.h first
sql/rpl_record_old.cc:
Use my_global.h first
sql/rpl_reporting.cc:
Use my_global.h first
sql/rpl_rli.cc:
Use my_global.h first
sql/rpl_tblmap.cc:
Use my_global.h first
sql/rpl_utility.cc:
Use my_global.h first
sql/set_var.cc:
Added comment
sql/slave.cc:
Use my_global.h first
sql/sp.cc:
Use my_global.h first
sql/sp_cache.cc:
Use my_global.h first
sql/sp_head.cc:
Use my_global.h first
sql/sp_pcontext.cc:
Use my_global.h first
sql/sp_rcontext.cc:
Use my_global.h first
sql/spatial.cc:
Use my_global.h first
sql/sql_acl.cc:
Use my_global.h first
sql/sql_admin.cc:
Use my_global.h first
sql/sql_analyse.cc:
Use my_global.h first
sql/sql_audit.cc:
Use my_global.h first
sql/sql_base.cc:
Use my_global.h first
sql/sql_binlog.cc:
Use my_global.h first
sql/sql_bootstrap.cc:
Use my_global.h first
Use my_global.h first
sql/sql_cache.cc:
Use my_global.h first
sql/sql_class.cc:
Use my_global.h first
sql/sql_client.cc:
Use my_global.h first
sql/sql_connect.cc:
Use my_global.h first
sql/sql_crypt.cc:
Use my_global.h first
sql/sql_cursor.cc:
Use my_global.h first
sql/sql_db.cc:
Use my_global.h first
sql/sql_delete.cc:
Use my_global.h first
sql/sql_derived.cc:
Use my_global.h first
sql/sql_do.cc:
Use my_global.h first
sql/sql_error.cc:
Use my_global.h first
sql/sql_explain.cc:
Use my_global.h first
sql/sql_expression_cache.cc:
Use my_global.h first
sql/sql_handler.cc:
Use my_global.h first
sql/sql_help.cc:
Use my_global.h first
sql/sql_insert.cc:
Use my_global.h first
sql/sql_lex.cc:
Use my_global.h first
sql/sql_load.cc:
Use my_global.h first
sql/sql_locale.cc:
Use my_global.h first
sql/sql_manager.cc:
Use my_global.h first
sql/sql_parse.cc:
Use my_global.h first
sql/sql_partition.cc:
Use my_global.h first
sql/sql_plugin.cc:
Added comment
sql/sql_prepare.cc:
Use my_global.h first
sql/sql_priv.h:
Added error if we use this before including my_global.h
This check is here becasue so many files includes sql_priv.h first.
sql/sql_profile.cc:
Use my_global.h first
sql/sql_reload.cc:
Use my_global.h first
sql/sql_rename.cc:
Use my_global.h first
sql/sql_repl.cc:
Use my_global.h first
sql/sql_select.cc:
Use my_global.h first
sql/sql_servers.cc:
Use my_global.h first
sql/sql_show.cc:
Added comment
sql/sql_signal.cc:
Use my_global.h first
sql/sql_statistics.cc:
Use my_global.h first
sql/sql_table.cc:
Use my_global.h first
sql/sql_tablespace.cc:
Use my_global.h first
sql/sql_test.cc:
Use my_global.h first
sql/sql_time.cc:
Use my_global.h first
sql/sql_trigger.cc:
Use my_global.h first
sql/sql_udf.cc:
Use my_global.h first
sql/sql_union.cc:
Use my_global.h first
sql/sql_update.cc:
Use my_global.h first
sql/sql_view.cc:
Use my_global.h first
sql/sys_vars.cc:
Added comment
sql/table.cc:
Use my_global.h first
sql/thr_malloc.cc:
Use my_global.h first
sql/transaction.cc:
Use my_global.h first
sql/uniques.cc:
Use my_global.h first
sql/unireg.cc:
Use my_global.h first
sql/unireg.h:
Removed inclusion of my_global.h
storage/archive/ha_archive.cc:
Added comment
storage/blackhole/ha_blackhole.cc:
Use my_global.h first
storage/csv/ha_tina.cc:
Use my_global.h first
storage/csv/transparent_file.cc:
Use my_global.h first
storage/federated/ha_federated.cc:
Use my_global.h first
storage/federatedx/federatedx_io.cc:
Use my_global.h first
storage/federatedx/federatedx_io_mysql.cc:
Use my_global.h first
storage/federatedx/federatedx_io_null.cc:
Use my_global.h first
storage/federatedx/federatedx_txn.cc:
Use my_global.h first
storage/heap/ha_heap.cc:
Use my_global.h first
storage/innobase/handler/handler0alter.cc:
Use my_global.h first
storage/maria/ha_maria.cc:
Use my_global.h first
storage/maria/unittest/ma_maria_log_cleanup.c:
Remove duplicated include files
storage/maria/unittest/test_file.c:
Added comment
storage/myisam/ha_myisam.cc:
Move sql_plugin.h first as this includes my_global.h
storage/myisammrg/ha_myisammrg.cc:
Use my_global.h first
storage/oqgraph/oqgraph_thunk.cc:
Use my_config.h and my_global.h first
One could not include my_global.h before oqgraph_thunk.h (don't know why)
storage/spider/ha_spider.cc:
Use my_global.h first
storage/spider/hs_client/config.cpp:
Use my_global.h first
storage/spider/hs_client/escape.cpp:
Use my_global.h first
storage/spider/hs_client/fatal.cpp:
Use my_global.h first
storage/spider/hs_client/hstcpcli.cpp:
Use my_global.h first
storage/spider/hs_client/socket.cpp:
Use my_global.h first
storage/spider/hs_client/string_util.cpp:
Use my_global.h first
storage/spider/spd_conn.cc:
Use my_global.h first
storage/spider/spd_copy_tables.cc:
Use my_global.h first
storage/spider/spd_db_conn.cc:
Use my_global.h first
storage/spider/spd_db_handlersocket.cc:
Use my_global.h first
storage/spider/spd_db_mysql.cc:
Use my_global.h first
storage/spider/spd_db_oracle.cc:
Use my_global.h first
storage/spider/spd_direct_sql.cc:
Use my_global.h first
storage/spider/spd_i_s.cc:
Use my_global.h first
storage/spider/spd_malloc.cc:
Use my_global.h first
storage/spider/spd_param.cc:
Use my_global.h first
storage/spider/spd_ping_table.cc:
Use my_global.h first
storage/spider/spd_sys_table.cc:
Use my_global.h first
storage/spider/spd_table.cc:
Use my_global.h first
storage/spider/spd_trx.cc:
Use my_global.h first
storage/xtradb/handler/handler0alter.cc:
Use my_global.h first
storage/xtradb/handler/i_s.cc:
Use my_global.h first
sql/item.cc:
don't forget to adjust the length of the string when removing leading spaces
sql/sql_acl.cc:
when updating the hostname of the ACL_USER, update the hostname_length too
sql/sql_parse.cc:
first compare the username string, then test the host pointer
(host pointer is undefined when the username string is one of the hard-coded values
set by the parser). This is not a bug, old code is perfectly safe as the undefined
host pointer is never dereferenced, but let's keep valgrind happy.
CHECK.
Analysis:
----------
Issue here is, while creating or altering the InnoDB table,
if the foreign key defined on the table references a parent
table on which the user has no access privileges then the
table is created without reporting any error.
Currently the privilege level REFERENCES_ACL is unused
and is not used for access evaluation while creating the
table with a foreign key constraint or adding the foreign
key constraint to a table. But when no privileges are granted
to user then also access evaluation on parent table is ignored.
Fix:
---------
For DMLs, irrelevant of the fact, support does not want any
changes to avoid permission checks on every operation.
So, as a fix, added a function "check_fk_parent_table_access"
to check whether any of the SELECT_ACL, INSERT_ACL, UDPATE_ACL,
DELETE_ACL or REFERENCE_ACL privileges are granted for user
at table level. If none of them is granted then error is reported.
This function is called during the table creation and alter
operation.
