With INFORMATION_SCHEMA set as the default database the check that a table
referred in the processed query is defined in INORMATION_SCHEMA must
be postponed until all CTE names can be identified.
within stored procedure
Always set SERVER_MORE_RESULTS_EXIST when executing stored procedure.
statements
If statements produce a result, EOF packet needs this flag (SP ends with
an OK packet). IF statetement does not produce a result, affected rows
count are part of the final OK packet.
This reverts commit 21b2fada7ab7f35c898c02d2f918461409cc9c8e
and commit 81d71ee6b21870772c336bff15b71904914f146a.
The MDEV-18464 change introduces a few data race issues. Contrary to
the documentation, the field trx_t::victim is not always being protected
by lock_sys_t::mutex and trx_t::mutex. Most importantly, it seems
that KILL QUERY could wrongly avoid acquiring both mutexes when
invoking lock_trx_handle_wait_low(), in case another thread had
already set trx->victim=true.
We also revert MDEV-12009, because it should depend on the MDEV-18464
fix being present.
As noted on kill_one_thread SUPER should be able to kill even
system threads i.e. threads/query flagged as high priority or
wsrep applier thread. Normal user, should not able to kill
threads/query flagged as high priority (BF) or wsrep applier
thread.
Simulate slow statements only for COM_QUERY and COM_STMT_EXECUTE commands,
to exclude mysqld_stmt_prepare() and mysqld_stmt_close() entries from the log,
as they are not relevant for log_slow_debug.test. This simplifies the test.
The MDEV-17262 commit 26432e49d37a37d09b862bb49a021e44bdf4789c
was skipped. In Galera 4, the implementation would seem to require
changes to the streaming replication.
In the tests archive.rnd_pos main.profiling, disable_ps_protocol
for SHOW STATUS and SHOW PROFILE commands until MDEV-18974
has been fixed.
Includes:
MDEV-17302 Add support for ALTER USER command in prepared statement
and
MDEV-17673 main.cte_recursive fails in bb-10.4-ps branch in --ps
Set correct SELECT_LEX linkage for recursive CTEs.
Do not delegate this job to TABLE_LIST::set_as_with_table,
because it is only run on prepare, while With_element::move_anchors_ahead
is run both on prepare and execute (fix by Igor)
There were two newly enabled warnings:
1. cast for a function pointers. Affected sql_analyse.h, mi_write.c
and ma_write.cc, mf_iocache-t.cc, mysqlbinlog.cc, encryption.cc, etc
2. memcpy/memset of nontrivial structures. Fixed as:
* the warning disabled for InnoDB
* TABLE, TABLE_SHARE, and TABLE_LIST got a new method reset() which
does the bzero(), which is safe for these classes, but any other
bzero() will still cause a warning
* Table_scope_and_contents_source_st uses `TABLE_LIST *` (trivial)
instead of `SQL_I_List<TABLE_LIST>` (not trivial) so it's safe to
bzero now.
* added casts in debug_sync.cc and sql_select.cc (for JOIN)
* move assignment method for MDL_request instead of memcpy()
* PARTIAL_INDEX_INTERSECT_INFO::init() instead of bzero()
* remove constructor from READ_RECORD() to make it trivial
* replace some memcpy() with c++ copy assignments
The patches features an optional shutdown behavior to hold on until
after all connected slaves have been sent the last binlogged event.
The connected slave is one whose START SLAVE has been acknowledged and
that was not stopped since that though it could be technically
reconnecting in background.
The solution therefore disallows killing the dump thread until is has
found EOF of the latest binlog file. It is up to the shutdown
requester (DBA) to set up a sufficiently large shutdown timeout value
for shudown to wait patiently until lagging behind slaves have been
synchronized. On the other hand if a specific slave needs exclusion
from synchronization the DBA would have to stop it manually which
would terminate its dump thread.
`mysqladmin shutdown' is extended with a `--wait_for_all_slaves' option
which translates to `SHUTDOW WAIT FOR ALL SLAVES' sql query
to enable the feature on the client side.
The patch also performs a small refactoring of the server shutdown
around close_connections() to introduce kill thread phases which
are two as of current.
Make mysqltest to use --ps-protocol more
use prepared statements for everything that server supports
with the exception of CALL (for now).
Fix discovered test failures and bugs.
tests:
* PROCESSLIST shows Execute state, not Query
* SHOW STATUS increments status variables more than in text protocol
* multi-statements should be avoided (see tests with a wrong delimiter)
* performance_schema events have different names in --ps-protocol
* --enable_prepare_warnings
mysqltest.cc:
* make sure run_query_stmt() doesn't crash if there's
no active connection (in wait_until_connected_again.inc)
* prepare all statements that server supports
protocol.h
* Protocol_discard::send_result_set_metadata() should not send
anything to the client.
sql_acl.cc:
* extract the functionality of getting the user for SHOW GRANTS
from check_show_access(), so that mysql_test_show_grants() could
generate the correct column names in the prepare step
sql_class.cc:
* result->prepare() can fail, don't ignore its return value
* use correct number of decimals for EXPLAIN columns
sql_parse.cc:
* discard profiling for SHOW PROFILE. In text protocol it's done in
prepare_schema_table(), but in --ps it is called on prepare only,
so nothing was discarding profiling during execute.
* move the permission checking code for SHOW CREATE VIEW to
mysqld_show_create_get_fields(), so that it would be called during
prepare step too.
* only set sel_result when it was created here and needs to be
destroyed in the same block. Avoid destroying lex->result.
* use the correct number of tables in check_show_access(). Saying
"as many as possible" doesn't work when first_not_own_table isn't
set yet.
sql_prepare.cc:
* use correct user name for SHOW GRANTS columns
* don't ignore verbose flag for SHOW SLAVE STATUS
* support preparing REVOKE ALL and ROLLBACK TO SAVEPOINT
* don't ignore errors from thd->prepare_explain_fields()
* use select_send result for sending ANALYZE and EXPLAIN, but don't
overwrite lex->result, because it might be needed to issue execute-time
errors (select_dumpvar - too many rows)
sql_show.cc:
* check grants for SHOW CREATE VIEW here, not in mysql_execute_command
sql_view.cc:
* use the correct function to check privileges. Old code was doing
check_access() for thd->security_ctx, which is invoker's sctx,
not definer's sctx. Hide various view related errors from the invoker.
sql_yacc.yy:
* initialize lex->select_lex for LOAD, otherwise it'll contain garbage
data that happen to fail tests with views in --ps (but not otherwise).
This solves the following issues:
* unlike lex->m_sql_cmd and lex->sql_command, thd->query_plan_flags
is not reset in Prepared_statement::execute, it survives
till the log_slow_statement(), so slow logging behaves correctly in --ps
* using thd->query_plan_flags for both slow_log_filter and
log_slow_admin_statements means the definition of "admin" statements
for the slow log is the same no matter how it is filtered out.
slave_list was used to provide data for SHOW SLAVE HOSTS and
Slaves_connected status variable.
Introduced binlog_dump_thread_count which is exposed via Slaves_connected
(replaces slave_list.records).
Store Slave_info on THD and access it by iterating server_threads
(replaces slave_list).
Added:
THD::slave_info
binlog_dump_thread_count
show_slave_hosts_callback()
Removed:
slave_list
SLAVE_LIST_CHUNK
SLAVE_ERRMSG_SIZE
slave_list_key()
slave_info_free()
init_slave_list()
end_slave_list()
all_slave_list_mutexes
init_all_slave_list_mutexes()
key_LOCK_slave_list
LOCK_slave_list
Moved:
SLAVE_INFO -> Slave_info
register_slave() -> THD::register_slave()
unregister_slave() -> THD::unregister_slave()
Also removed redundant end_slave() from close_connections(): it is called
again soon afterwards by clean_up().
Pre-requisite for clean MDEV-18450 solution.
This patch adds support for expiring user passwords.
The following statements are extended:
CREATE USER user@localhost PASSWORD EXPIRE [option]
ALTER USER user@localhost PASSWORD EXPIRE [option]
If no option is specified, the password is expired with immediate
effect. If option is DEFAULT, global policy applies according to
the default_password_lifetime system var (if 0, password never
expires, if N, password expires every N days). If option is NEVER,
the password never expires and if option is INTERVAL N DAY, the
password expires every N days.
The feature also supports the disconnect_on_expired_password system
var and the --connect-expired-password client option.
Closes#1166
