INSERT IGNORE ... SELECT ... UNION SELECT ...
This assert was triggered by INSERT IGNORE ... SELECT. The assert checks that a
statement either sends OK or an error to the client. If the bug was triggered
on release builds, it caused OK to be sent to the client instead of the correct
error message (in this case ER_FIELD_SPECIFIED_TWICE).
The reason the assert was triggered, was that lex->no_error was set to TRUE
during JOIN::optimize() because of IGNORE. This causes all errors to be ignored.
However, not all errors can be ignored. Some, such as ER_FIELD_SPECIFIED_TWICE
will cause the INSERT to fail no matter what. But since lex->no_error was set,
the critical errors were ignored, the INSERT failed and neither OK nor the
error message was sent to the client.
This patch fixes the problem by temporarily turning off lex->no_error in
places where errors cannot be ignored during processing of INSERT ... SELECT.
Test case added to insert.test.
INSERT IGNORE ... SELECT ... UNION SELECT ...
This assert was triggered by INSERT IGNORE ... SELECT. The assert checks that a
statement either sends OK or an error to the client. If the bug was triggered
on release builds, it caused OK to be sent to the client instead of the correct
error message (in this case ER_FIELD_SPECIFIED_TWICE).
The reason the assert was triggered, was that lex->no_error was set to TRUE
during JOIN::optimize() because of IGNORE. This causes all errors to be ignored.
However, not all errors can be ignored. Some, such as ER_FIELD_SPECIFIED_TWICE
will cause the INSERT to fail no matter what. But since lex->no_error was set,
the critical errors were ignored, the INSERT failed and neither OK nor the
error message was sent to the client.
This patch fixes the problem by temporarily turning off lex->no_error in
places where errors cannot be ignored during processing of INSERT ... SELECT.
Test case added to insert.test.
Fixed some wrong test cases
Fixed bug in null handling in XtraDB
extra/comp_err.c:
Fixed compiler warnings
extra/my_print_defaults.c:
Fixed compiler warnings
mysql-test/suite/binlog/t/binlog_killed.test:
Added support for timeouts
mysql-test/suite/funcs_1/r/is_columns_is.result:
Updated results (INNODB_SYS_TABLES had got new column)
scripts/mysql_install_db.sh:
Fixed typo
sql/mysql_priv.h:
Removed not needed argument for compare_record()
sql/sql_insert.cc:
Removed not needed argument for compare_record()
sql/sql_update.cc:
Removed not needed argument for compare_record()
The argument is not needed becasue we copy the full record[0] to record[1] and the comparison should work even if all columns are not read
sql/table.cc:
The comparison of rows is independent of HA_PARTIAL_COLUMN_READ
storage/maria/maria_chk.c:
Fixed compiler warnings
storage/maria/maria_read_log.c:
Fixed compiler warnings
storage/myisam/myisamchk.c:
Fixed compiler warnings
storage/myisam/myisampack.c:
Fixed compiler warnings
storage/xtradb/dict/dict0load.c:
Fixed compiler warnings
storage/xtradb/row/row0sel.c:
Fixed null handling in XtraDB. (See comment)
storage/xtradb/trx/trx0sys.c:
Fixed compiler warnings
support-files/compiler_warnings.supp:
Fixed compiler warnings
This was triggered by innodb.innodb_multi_update, where we had a static length row without nulls and xtradb didn't fill in the delete-marker byte
include/my_bitmap.h:
Added prototype for bitmap_union_is_set_all()
mysys/my_bitmap.c:
Added function to check if union of two bit maps covers all bits.
sql/mysql_priv.h:
Updated protype for compare_record()
sql/sql_insert.cc:
Send to compare_record() flag if all fields are used.
sql/sql_select.cc:
Set share->null_bytes_for_compare.
sql/sql_update.cc:
In compare_record() don't use the fast cmp_record() (which is basically memcmp) if we don't know that all fields exists.
Don't compare the null_bytes if there is no data there.
sql/table.cc:
Store in share->null_bytes_for_compare the number of bytes that has null or bit fields (but not delete marker)
Store in can_cmp_whole_record if we can use memcmp() (assuming all rows are read) to compare rows in compare_record()
sql/table.h:
Added two elements in table->share to speed up checking how updated rows can be compared.
A CREATE...SELECT that fails is written to the binary log if a non-transactional
statement is updated. If the logging format is ROW, the CREATE statement and the
changes are written to the binary log as distinct events and by consequence the
created table is not rolled back in the slave.
In this patch, we opted to let the slave goes out of sync by not writting to the
binary log the CREATE statement. We do this by simply reseting the binary log's
cache.
mysql-test/suite/rpl/r/rpl_drop.result:
Added a test case.
mysql-test/suite/rpl/t/rpl_drop.test:
Added a test case.
sql/log.cc:
Introduced a function to clean up the cache.
sql/log.h:
Introduced a function to clean up the cache.
sql/sql_insert.cc:
Cleaned up the binary log cache if a CREATE...SELECT fails.
A CREATE...SELECT that fails is written to the binary log if a non-transactional
statement is updated. If the logging format is ROW, the CREATE statement and the
changes are written to the binary log as distinct events and by consequence the
created table is not rolled back in the slave.
In this patch, we opted to let the slave goes out of sync by not writting to the
binary log the CREATE statement. We do this by simply reseting the binary log's
cache.
This patch also fixes Bug#55452 "SET PASSWORD is
replicated twice in RBR mode".
The goal of this patch is to remove the release of
metadata locks from close_thread_tables().
This is necessary to not mistakenly release
the locks in the course of a multi-step
operation that involves multiple close_thread_tables()
or close_tables_for_reopen().
On the same token, move statement commit outside
close_thread_tables().
Other cleanups:
Cleanup COM_FIELD_LIST.
Don't call close_thread_tables() in COM_SHUTDOWN -- there
are no open tables there that can be closed (we leave
the locked tables mode in THD destructor, and this
close_thread_tables() won't leave it anyway).
Make open_and_lock_tables() and open_and_lock_tables_derived()
call close_thread_tables() upon failure.
Remove the calls to close_thread_tables() that are now
unnecessary.
Simplify the back off condition in Open_table_context.
Streamline metadata lock handling in LOCK TABLES
implementation.
Add asserts to ensure correct life cycle of
statement transaction in a session.
Remove a piece of dead code that has also become redundant
after the fix for Bug 37521.
mysql-test/r/variables.result:
Update results: set @@autocommit and statement transaction/
prelocked mode.
mysql-test/r/view.result:
A harmless change in CHECK TABLE <view> status for a broken view.
If previously a failure to prelock all functions used in a view
would leave the connection in LTM_PRELOCKED mode, now we call
close_thread_tables() from open_and_lock_tables()
and leave prelocked mode, thus some check in mysql_admin_table() that
works only in prelocked/locked tables mode is no longer activated.
mysql-test/suite/rpl/r/rpl_row_implicit_commit_binlog.result:
Fixed Bug#55452 "SET PASSWORD is replicated twice in
RBR mode": extra binlog events are gone from the
binary log.
mysql-test/t/variables.test:
Add a test case: set autocommit and statement transaction/prelocked
mode.
sql/event_data_objects.cc:
Simplify code in Event_job_data::execute().
Move sp_head memory management to lex_end().
sql/event_db_repository.cc:
Move the release of metadata locks outside
close_thread_tables().
Make sure we call close_thread_tables() when
open_and_lock_tables() fails and remove extra
code from the events data dictionary.
Use close_mysql_tables(), a new internal
function to properly close mysql.* tables
in the data dictionary.
Contract Event_db_repository::drop_events_by_field,
drop_schema_events into one function.
When dropping all events in a schema,
make sure we don't mistakenly release all
locks acquired by DROP DATABASE. These
include locks on the database name
and the global intention exclusive
metadata lock.
sql/event_db_repository.h:
Function open_event_table() does not require an instance
of Event_db_repository.
sql/events.cc:
Use close_mysql_tables() instead of close_thread_tables()
to bootstrap events, since the latter no longer
releases metadata locks.
sql/ha_ndbcluster.cc:
- mysql_rm_table_part2 no longer releases
acquired metadata locks. Do it in the caller.
sql/ha_ndbcluster_binlog.cc:
Deploy the new protocol for closing thread
tables in run_query() and ndb_binlog_index
code.
sql/handler.cc:
Assert that we never call ha_commit_trans/
ha_rollback_trans in sub-statement, which
is now the case.
sql/handler.h:
Add an accessor to check whether THD_TRANS object
is empty (has no transaction started).
sql/log.cc:
Update a comment.
sql/log_event.cc:
Since now we commit/rollback statement transaction in
mysql_execute_command(), we need a mechanism to communicate
from Query_log_event::do_apply_event() to mysql_execute_command()
that the statement transaction should be rolled back, not committed.
Ideally it would be a virtual method of THD. I hesitate
to make THD a virtual base class in this already large patch.
Use a thd->variables.option_bits for now.
Remove a call to close_thread_tables() from the slave IO
thread. It doesn't open any tables, and the protocol
for closing thread tables is more complicated now.
Make sure we properly close thread tables, however,
in Load_data_log_event, which doesn't
follow the standard server execution procedure
with mysql_execute_command().
@todo: this piece should use Server_runnable
framework instead.
Remove an unnecessary call to mysql_unlock_tables().
sql/rpl_rli.cc:
Update Relay_log_info::slave_close_thread_tables()
to follow the new close protocol.
sql/set_var.cc:
Remove an unused header.
sql/slave.cc:
Remove an unnecessary call to
close_thread_tables().
sql/sp.cc:
Remove unnecessary calls to close_thread_tables()
from SP DDL implementation. The tables will
be closed by the caller, in mysql_execute_command().
When dropping all routines in a database, make sure
to not mistakenly drop all metadata locks acquired
so far, they include the scoped lock on the schema.
sql/sp_head.cc:
Correct the protocol that closes thread tables
in an SP instruction.
Clear lex->sphead before cleaning up lex
with lex_end to make sure that we don't
delete the sphead twice. It's considered
to be "cleaner" and more in line with
future changes than calling delete lex->sphead
in other places that cleanup the lex.
sql/sp_head.h:
When destroying m_lex_keeper of an instruction,
don't delete the sphead that all lex objects
share.
@todo: don't store a reference to routine's sp_head
instance in instruction's lex.
sql/sql_acl.cc:
Don't call close_thread_tables() where the caller will
do that for us.
Fix Bug#55452 "SET PASSWORD is replicated twice in RBR
mode" by disabling RBR replication in change_password()
function.
Use close_mysql_tables() in bootstrap and ACL reload
code to make sure we release all metadata locks.
sql/sql_base.cc:
This is the main part of the patch:
- remove manipulation with thd->transaction
and thd->mdl_context from close_thread_tables().
Now this function is only responsible for closing
tables, nothing else.
This is necessary to be able to easily use
close_thread_tables() in procedures, that
involve multiple open/close tables, which all
need to be protected continuously by metadata
locks.
Add asserts ensuring that TABLE object
is only used when is protected by a metadata lock.
Simplify the back off condition of Open_table_context,
we no longer need to look at the autocommit mode.
Make open_and_lock_tables() and open_normal_and_derived_tables()
close thread tables and release metadata locks acquired so-far
upon failure. This simplifies their usage.
Implement close_mysql_tables().
sql/sql_base.h:
Add declaration for close_mysql_tables().
sql/sql_class.cc:
Remove a piece of dead code that has also become redundant
after the fix for Bug 37521.
The code became dead when my_eof() was made a non-protocol method,
but a method that merely modifies the diagnostics area.
The code became redundant with the fix for Bug#37521, when
we started to cal close_thread_tables() before
Protocol::end_statement().
sql/sql_do.cc:
Do nothing in DO if inside a substatement
(the assert moved out of trans_rollback_stmt).
sql/sql_handler.cc:
Add comments.
sql/sql_insert.cc:
Remove dead code.
Release metadata locks explicitly at the
end of the delayed insert thread.
sql/sql_lex.cc:
Add destruction of lex->sphead to lex_end(),
lex "reset" method called at the end of each statement.
sql/sql_parse.cc:
Move close_thread_tables() and other related
cleanups to mysql_execute_command()
from dispatch_command(). This has become
possible after the fix for Bug#37521.
Mark federated SERVER statements as DDL.
Next step: make sure that we don't store
eof packet in the query cache, and move
the query cache code outside mysql_parse.
Brush up the code of COM_FIELD_LIST.
Remove unnecessary calls to close_thread_tables().
When killing a query, don't report "OK"
if it was a suicide.
sql/sql_parse.h:
Remove declaration of a function that is now static.
sql/sql_partition.cc:
Remove an unnecessary call to close_thread_tables().
sql/sql_plugin.cc:
open_and_lock_tables() will clean up
after itself after a failure.
Move close_thread_tables() above
end: label, and replace with close_mysql_tables(),
which will also release the metadata lock
on mysql.plugin.
sql/sql_prepare.cc:
Now that we no longer release locks in close_thread_tables()
statement prepare code has become more straightforward.
Remove the now redundant check for thd->killed() (used
only by the backup project) from Execute_server_runnable.
Reorder code to take into account that now mysql_execute_command()
performs lex->unit.cleanup() and close_thread_tables().
sql/sql_priv.h:
Add a new option to server options to interact
between the slave SQL thread and execution
framework (hack). @todo: use a virtual
method of class THD instead.
sql/sql_servers.cc:
Due to Bug 25705 replication of
DROP/CREATE/ALTER SERVER is broken.
Make sure at least we do not attempt to
replicate these statements using RBR,
as this violates the assert in close_mysql_tables().
sql/sql_table.cc:
Do not release metadata locks in mysql_rm_table_part2,
this is done by the caller.
Do not call close_thread_tables() in mysql_create_table(),
this is done by the caller.
Fix a bug in DROP TABLE under LOCK TABLES when,
upon error in wait_while_table_is_used() we would mistakenly
release the metadata lock on a non-dropped table.
Explicitly release metadata locks when doing an implicit
commit.
sql/sql_trigger.cc:
Now that we delete lex->sphead in lex_end(),
zero the trigger's sphead in lex after loading
the trigger, to avoid double deletion.
sql/sql_udf.cc:
Use close_mysql_tables() instead of close_thread_tables().
sql/sys_vars.cc:
Remove code added in scope of WL#4284 which would
break when we perform set @@session.autocommit along
with setting other variables and using tables or functions.
A test case added to variables.test.
sql/transaction.cc:
Add asserts.
sql/tztime.cc:
Use close_mysql_tables() rather than close_thread_tables().
This patch also fixes Bug#55452 "SET PASSWORD is
replicated twice in RBR mode".
The goal of this patch is to remove the release of
metadata locks from close_thread_tables().
This is necessary to not mistakenly release
the locks in the course of a multi-step
operation that involves multiple close_thread_tables()
or close_tables_for_reopen().
On the same token, move statement commit outside
close_thread_tables().
Other cleanups:
Cleanup COM_FIELD_LIST.
Don't call close_thread_tables() in COM_SHUTDOWN -- there
are no open tables there that can be closed (we leave
the locked tables mode in THD destructor, and this
close_thread_tables() won't leave it anyway).
Make open_and_lock_tables() and open_and_lock_tables_derived()
call close_thread_tables() upon failure.
Remove the calls to close_thread_tables() that are now
unnecessary.
Simplify the back off condition in Open_table_context.
Streamline metadata lock handling in LOCK TABLES
implementation.
Add asserts to ensure correct life cycle of
statement transaction in a session.
Remove a piece of dead code that has also become redundant
after the fix for Bug 37521.
For queries with order by clauses that employed filesort usage of
virtual column references in select lists could trigger assertion
failures. It happened because a wrong vcol_set bitmap was used for
filesort. It turned out that filesort required its own vcol_set bitmap.
Made management of the vcol_set bitmaps similar to the management
of the read_set and write_set bitmaps.
There were two problems that caused wrong results reported with this bug.
1. In some cases stored(persistent) virtual columns were not marked
in the write_set and in the vcol_set bitmaps.
2. If the list of fields in an insert command was empty then the values of
the stored virtual columns were set to default.
To fix the first problem the function st_table::mark_virtual_columns_for_write
was modified. Now the function has a parameter that says whether the virtual
columns are to be marked for insert or for update.
To fix the second problem a special handling of empty insert lists is
added in the function fill_record().
Essentially, the problem is that safemalloc is excruciatingly
slow as it checks all allocated blocks for overrun at each
memory management primitive, yielding a almost exponential
slowdown for the memory management functions (malloc, realloc,
free). The overrun check basically consists of verifying some
bytes of a block for certain magic keys, which catches some
simple forms of overrun. Another minor problem is violation
of aliasing rules and that its own internal list of blocks
is prone to corruption.
Another issue with safemalloc is rather the maintenance cost
as the tool has a significant impact on the server code.
Given the magnitude of memory debuggers available nowadays,
especially those that are provided with the platform malloc
implementation, maintenance of a in-house and largely obsolete
memory debugger becomes a burden that is not worth the effort
due to its slowness and lack of support for detecting more
common forms of heap corruption.
Since there are third-party tools that can provide the same
functionality at a lower or comparable performance cost, the
solution is to simply remove safemalloc. Third-party tools
can provide the same functionality at a lower or comparable
performance cost.
The removal of safemalloc also allows a simplification of the
malloc wrappers, removing quite a bit of kludge: redefinition
of my_malloc, my_free and the removal of the unused second
argument of my_free. Since free() always check whether the
supplied pointer is null, redudant checks are also removed.
Also, this patch adds unit testing for my_malloc and moves
my_realloc implementation into the same file as the other
memory allocation primitives.
client/mysqldump.c:
Pass my_free directly as its signature is compatible with the
callback type -- which wasn't the case for free_table_ent.
Essentially, the problem is that safemalloc is excruciatingly
slow as it checks all allocated blocks for overrun at each
memory management primitive, yielding a almost exponential
slowdown for the memory management functions (malloc, realloc,
free). The overrun check basically consists of verifying some
bytes of a block for certain magic keys, which catches some
simple forms of overrun. Another minor problem is violation
of aliasing rules and that its own internal list of blocks
is prone to corruption.
Another issue with safemalloc is rather the maintenance cost
as the tool has a significant impact on the server code.
Given the magnitude of memory debuggers available nowadays,
especially those that are provided with the platform malloc
implementation, maintenance of a in-house and largely obsolete
memory debugger becomes a burden that is not worth the effort
due to its slowness and lack of support for detecting more
common forms of heap corruption.
Since there are third-party tools that can provide the same
functionality at a lower or comparable performance cost, the
solution is to simply remove safemalloc. Third-party tools
can provide the same functionality at a lower or comparable
performance cost.
The removal of safemalloc also allows a simplification of the
malloc wrappers, removing quite a bit of kludge: redefinition
of my_malloc, my_free and the removal of the unused second
argument of my_free. Since free() always check whether the
supplied pointer is null, redudant checks are also removed.
Also, this patch adds unit testing for my_malloc and moves
my_realloc implementation into the same file as the other
memory allocation primitives.
Conflicts:
Text conflict in mysql-test/r/archive.result
Contents conflict in mysql-test/r/innodb_bug38231.result
Text conflict in mysql-test/r/mdl_sync.result
Text conflict in mysql-test/suite/binlog/t/disabled.def
Text conflict in mysql-test/suite/rpl_ndb/r/rpl_ndb_binlog_format_errors.result
Text conflict in mysql-test/t/archive.test
Contents conflict in mysql-test/t/innodb_bug38231.test
Text conflict in mysql-test/t/mdl_sync.test
Text conflict in sql/sp_head.cc
Text conflict in sql/sql_show.cc
Text conflict in sql/table.cc
Text conflict in sql/table.h
Conflicts:
Text conflict in mysql-test/r/archive.result
Contents conflict in mysql-test/r/innodb_bug38231.result
Text conflict in mysql-test/r/mdl_sync.result
Text conflict in mysql-test/suite/binlog/t/disabled.def
Text conflict in mysql-test/suite/rpl_ndb/r/rpl_ndb_binlog_format_errors.result
Text conflict in mysql-test/t/archive.test
Contents conflict in mysql-test/t/innodb_bug38231.test
Text conflict in mysql-test/t/mdl_sync.test
Text conflict in sql/sp_head.cc
Text conflict in sql/sql_show.cc
Text conflict in sql/table.cc
Text conflict in sql/table.h
transactional SELECT and ALTER TABLE ... REBUILD PARTITION".
Make open flags part of Open_table_context.
This allows to simplify some code and (in future)
enforce the invariant that we don't, say, request a back
off on the table when there is MYSQL_OPEN_IGNORE_FLUSH
flag.
sql/sql_base.cc:
open_table() flags are part of Open_table_context.
Remove dead code that would check for OPEN_VIEW_NO_PARSE,
which is not an open table flag.
sql/sql_base.h:
Move flags to Open_table_context. Reorder Open_table_context
members to compact the structure footprint.
sql/sql_insert.cc:
Update with a new calling signature of open_table().
sql/sql_table.cc:
Update with a new calling signature of open_table().
transactional SELECT and ALTER TABLE ... REBUILD PARTITION".
Make open flags part of Open_table_context.
This allows to simplify some code and (in future)
enforce the invariant that we don't, say, request a back
off on the table when there is MYSQL_OPEN_IGNORE_FLUSH
flag.
for ALTER TABLE, LOAD DATA).
ROW_COUNT is now assigned according to the following rules:
- In my_ok():
- for DML statements: to the number of affected rows;
- for DDL statements: to 0.
- In my_eof(): to -1 to indicate that there was a result set.
We derive this semantics from the JDBC specification, where int
java.sql.Statement.getUpdateCount() is defined to (sic) "return the
current result as an update count; if the result is a ResultSet
object or there are no more results, -1 is returned".
- In my_error(): to -1 to be compatible with the MySQL C API and
MySQL ODBC driver.
- For SIGNAL statements: to 0 per WL#2110 specification. Zero is used
since that's the "default" value of ROW_COUNT in the diagnostics area.
sql/protocol.cc:
Fix a typo.
sql/sql_class.h:
- Introduce THD::get_row_count_func() / THD::set_row_count_func();
- Remove the CF_HAS_ROW_COUNT define
sql/sql_parse.cc:
CF_HAS_ROW_COUNT was eliminated.
for ALTER TABLE, LOAD DATA).
ROW_COUNT is now assigned according to the following rules:
- In my_ok():
- for DML statements: to the number of affected rows;
- for DDL statements: to 0.
- In my_eof(): to -1 to indicate that there was a result set.
We derive this semantics from the JDBC specification, where int
java.sql.Statement.getUpdateCount() is defined to (sic) "return the
current result as an update count; if the result is a ResultSet
object or there are no more results, -1 is returned".
- In my_error(): to -1 to be compatible with the MySQL C API and
MySQL ODBC driver.
- For SIGNAL statements: to 0 per WL#2110 specification. Zero is used
since that's the "default" value of ROW_COUNT in the diagnostics area.
Docs/sp-imp-spec.txt:
New sql_mode added.
include/my_base.h:
Flag in frm of create options.
libmysqld/CMakeLists.txt:
New files added.
libmysqld/Makefile.am:
New files added.
mysql-test/r/events_bugs.result:
New sql_mode added.
mysql-test/r/information_schema.result:
New sql_mode added.
mysql-test/r/sp.result:
New sql_mode added.
mysql-test/r/system_mysql_db.result:
New sql_mode added.
mysql-test/suite/funcs_1/r/is_columns_mysql.result:
New sql_mode added.
mysql-test/suite/funcs_1/r/is_columns_mysql_embedded.result:
New sql_mode added.
mysql-test/t/events_bugs.test:
New sql_mode added.
mysql-test/t/sp.test:
New sql_mode added.
scripts/mysql_system_tables.sql:
New sql_mode added.
scripts/mysql_system_tables_fix.sql:
New sql_mode added.
sql/CMakeLists.txt:
New files added.
sql/Makefile.am:
New files added.
sql/event_db_repository.cc:
New sql_mode added.
sql/field.cc:
Create options support added.
sql/field.h:
Create options support added.
sql/ha_partition.cc:
Create options support added.
sql/handler.cc:
Create options support added.
sql/handler.h:
Create options support added.
sql/log_event.h:
New sql_mode added.
sql/mysql_priv.h:
New sql_mode added.
sql/mysqld.cc:
New sql_mode added.
sql/share/errmsg.txt:
New error messages added.
sql/sp.cc:
New sql_mode added.
sql/sp_head.cc:
Create options support added.
sql/sql_class.cc:
Create options support added.
Debug added.
sql/sql_class.h:
Create options support added.
sql/sql_insert.cc:
my_safe_a* moved to mysqld_priv.h
sql/sql_lex.h:
Create options support added.
sql/sql_parse.cc:
Create options support added.
sql/sql_show.cc:
Create options support added.
sql/sql_table.cc:
Create options support added.
sql/sql_view.cc:
New sql_mode added.
sql/sql_yacc.yy:
Create options support added.
sql/structs.h:
Create options support added.
sql/table.cc:
Create options support added.
sql/table.h:
Create options support added.
sql/unireg.cc:
Create options support added.
storage/example/ha_example.cc:
Create options example.
storage/example/ha_example.h:
Create options example.
storage/pbxt/src/discover_xt.cc:
Create options support added.
Adding my_global.h first in all files using
NO_EMBEDDED_ACCESS_CHECKS.
Correcting a merge problem resulting from a changed definition
of check_some_access compared to the original patches.
Adding my_global.h first in all files using
NO_EMBEDDED_ACCESS_CHECKS.
Correcting a merge problem resulting from a changed definition
of check_some_access compared to the original patches.
Conflicts:
Text conflict in mysql-test/suite/binlog/r/binlog_row_mix_innodb_myisam.result
Text conflict in sql/log.cc
Text conflict in sql/set_var.cc
Text conflict in sql/sql_class.cc
Conflicts:
Text conflict in mysql-test/suite/binlog/r/binlog_row_mix_innodb_myisam.result
Text conflict in sql/log.cc
Text conflict in sql/set_var.cc
Text conflict in sql/sql_class.cc
This patch:
- Moves all definitions from the mysql_priv.h file into
header files for the component where the variable is
defined
- Creates header files if the component lacks one
- Eliminates all include directives from mysql_priv.h
- Eliminates all circular include cycles
- Rename time.cc to sql_time.cc
- Rename mysql_priv.h to sql_priv.h
This patch:
- Moves all definitions from the mysql_priv.h file into
header files for the component where the variable is
defined
- Creates header files if the component lacks one
- Eliminates all include directives from mysql_priv.h
- Eliminates all circular include cycles
- Rename time.cc to sql_time.cc
- Rename mysql_priv.h to sql_priv.h
Makefile.am:
add new API files to the check_abi rule,
remove duplicates
client/CMakeLists.txt:
now a client can use dlopen too
client/Makefile.am:
be csh-friendly
include/my_global.h:
add dummy plugs for dlopen and co.
for the code that needs them to work in static builds
mysys/Makefile.am:
be csh-friendly
plugin/auth/dialog.c:
typo fixed
CHECK_FIELD_IGNORE was treated as CHECK_FIELD_ERROR_FOR_NULL;
UPDATE...SET...NULL on NOT NULL fields behaved differently after
a trigger.
Now distinguishes between IGNORE and ERROR_FOR_NULL and save/restores
check-field options.
mysql-test/r/trigger.result:
Show that UPDATE...SET...NULL on NOT NULL columns doesn't behave differently
when run after a trigger.
mysql-test/t/trigger.test:
Show that UPDATE...SET...NULL on NOT NULL columns doesn't behave differently
when run after a trigger.
sql/field_conv.cc:
CHECK_FIELD_IGNORE was treated as CHECK_FIELD_ERROR_FOR_NULL.
Distinguish between the two.
sql/sp_head.cc:
Raise error as needed.
sql/sql_class.cc:
Save and restore check-fields options.
sql/sql_class.h:
Make room so we can save check-fields options.
sql/sql_insert.cc:
Raise error as needed.
CHECK_FIELD_IGNORE was treated as CHECK_FIELD_ERROR_FOR_NULL;
UPDATE...SET...NULL on NOT NULL fields behaved differently after
a trigger.
Now distinguishes between IGNORE and ERROR_FOR_NULL and save/restores
check-field options.
DDL no longer aborts mysql_lock_tables(), and hence
we no longer need to support need_reopen flag of this
call.
Remove the flag, and all the code in the server
that was responsible for handling the case when
it was set. This allowed to simplify:
open_and_lock_tables_derived(), the delayed thread,
multi-update.
Rename MYSQL_LOCK_IGNORE_FLUSH to MYSQL_OPEN_IGNORE_FLUSH,
since we now only support this flag in open_table().
Rename MYSQL_LOCK_PERF_SCHEMA to MYSQL_LOCK_LOG_TABLE,
to avoid confusion.
Move the wait for the global read lock for cases
when we do updates in SELECT f1() or DO (UPDATE) to
open_table() from mysql_lock_tables(). When waiting
for the read lock, we could raise need_reopen flag,
which is no longer present in mysql_lock_tables().
Since the block responsible for waiting for GRL
was moved, MYSQL_LOCK_IGNORE_GLOBAL_READ_LOCK
was renamed to MYSQL_OPEN_IGNORE_GLOBAL_READ_LOCK.
mysql-test/r/mdl_sync.result:
Update test results (see comments for mdl_sync.test).
mysql-test/t/mdl_sync.test:
Update tests: an abort mysql_lock_tables() called for an
INSERT no longer auto-closes SQL HANDLERS, since it
no longer leads to back-off and retry.
sql/ha_ndbcluster_binlog.cc:
Remove unused variables.
sql/lock.cc:
Remove support for need_reopen parameter of mysql_lock_tables().
Update comments.
sql/log_event_old.cc:
Remove the loop responsible for handling need_reopen
out parameter of mysql_lock_tables().
sql/mysql_priv.h:
Update open and lock tables flag names.
sql/share/errmsg-utf8.txt:
Add a new error message to report when
thr_multi_lock() is aborted.
sql/sql_base.cc:
Update comments. Rename MYSQL_LOCK_IGNORE_FLUSH
to MYSQL_OPEN_IGNORE_FLUSH.
sql/sql_class.h:
Remove unused code.
sql/sql_db.cc:
Remove an unused bit of code.
sql/sql_handler.cc:
For backward compatibility, we still want to back off and
retry when a call to mysql_lock_tables() is aborted
from within an SQL HANDLER. Write an internal error
handler to support the case.
sql/sql_insert.cc:
Call mysql_lock_tables() no longer has need_reopen
out parameter. Simplify the code by removing
the crud that took care of it.
MYSQL_LOCK_IGNORE_FLUSH is now only supported by
open_tables().
sql/sql_show.cc:
Rename MYSQL_LOCK_IGNORE_FLUSH to MYSQL_OPEN_IGNORE_FLUSH
sql/sql_table.cc:
Remove an unused parameter.
sql/sql_update.cc:
Remove the need_reopen loop from multi-update.
We no also longer need to cleanup the parse tree in case
when mysql_lock_tables() is aborted and thus an infinite
source of multi-update bugs is gone.
sql/tztime.cc:
Rename MYSQL_LOCK_IGNORE_FLUSH to MYSQL_OPEN_IGNORE_FLUSH,
since from now on this flag is only supported by open_table().
DDL no longer aborts mysql_lock_tables(), and hence
we no longer need to support need_reopen flag of this
call.
Remove the flag, and all the code in the server
that was responsible for handling the case when
it was set. This allowed to simplify:
open_and_lock_tables_derived(), the delayed thread,
multi-update.
Rename MYSQL_LOCK_IGNORE_FLUSH to MYSQL_OPEN_IGNORE_FLUSH,
since we now only support this flag in open_table().
Rename MYSQL_LOCK_PERF_SCHEMA to MYSQL_LOCK_LOG_TABLE,
to avoid confusion.
Move the wait for the global read lock for cases
when we do updates in SELECT f1() or DO (UPDATE) to
open_table() from mysql_lock_tables(). When waiting
for the read lock, we could raise need_reopen flag,
which is no longer present in mysql_lock_tables().
Since the block responsible for waiting for GRL
was moved, MYSQL_LOCK_IGNORE_GLOBAL_READ_LOCK
was renamed to MYSQL_OPEN_IGNORE_GLOBAL_READ_LOCK.
