ENGINE_SUBSTITUTION only applies to CREATE TABLE and ALTER TABLE, and
Storage_engine_name::resolve_storage_engine_with_error() could be
called when executing any sql command.
There are two problems.
First, replication fails when XA transactions are used where the
slave has replicate_do_db set and the client has touched a different
database when running DML such as inserts. This is because XA
commands are not treated as keywords, and are thereby not exempt
from the replication filter. The effect of this is that during an XA
transaction, if its logged “use db” from the master is filtered out
by the replication filter, then XA END will be ignored, yet its
corresponding XA PREPARE will be executed in an invalid state,
thereby breaking replication.
Second, if the slave replicates an XA transaction which results in
an empty transaction, the XA START through XA PREPARE first phase of
the transaction won’t be binlogged, yet the XA COMMIT will be
binlogged. This will break replication in chain configurations.
The first problem is fixed by treating XA commands in
Query_log_event as keywords, thus allowing them to bypass the
replication filter. Note that Query_log_event::is_trans_keyword() is
changed to accept a new parameter to define its mode, to either
check for XA commands or regular transaction commands, but not both.
In addition, mysqlbinlog is adapted to use this mode so its
--database filter does not remove XA commands from its output.
The second problem fixed by overwriting the XA state in the XID
cache to be XA_ROLLBACK_ONLY, so at commit time, the server knows to
rollback the transaction and skip its binlogging. If the xid cache
is cleared before an XA transaction receives its completion command
(e.g. on server shutdown), then before reporting ER_XAER_NOTA when
the completion command is executed, the filter is first checked if
the database is ignored, and if so, the error is ignored.
Reviewed By:
============
Kristian Nielsen <knielsen@knielsen-hq.org>
Andrei Elkin <andrei.elkin@mariadb.com>
InnoDB transactions may be reused after committed:
- when taken from the transaction pool
- during a DDL operation execution
In this case wsrep flag on trx object is cleared, which may cause wrong
execution logic afterwards (wsrep-related hooks are not run).
Make trx->wsrep flag initialize from THD object only once on InnoDB transaction
start and don't change it throughout the transaction's lifetime.
The flag is reset at commit time as before.
Unconditionally set wsrep=OFF for THD objects that represent InnoDB background
threads.
Make Wsrep_schema::store_view() operate in its own transaction.
Fix streaming replication transactions' fragments rollback to not switch
THD->wsrep value during transaction's execution
(use THD->wsrep_ignore_table as a workaround).
Signed-off-by: Julius Goryavsky <julius.goryavsky@mariadb.com>
Correct the second parameter for strxnmov to prevent potential buffer
overflows. The second parameter must be one less than the size of the
input buffer to avoid writing past the end of the buffer.
While the second parameter is usually correct, there are exceptions
that need fixing.
This commit addresses the issue within frm_file_exists() and other
affected places.
on disable_indexes(HA_KEY_SWITCH_NONUNIQ_SAVE) the engine does
not know that the long unique is logically unique, because on the
engine level it is not. And the engine disables it,
Change the disable_indexes/enable_indexes API. Instead of the enum
mode, send a key_map of indexes that should be enabled. This way the
server will decide what is unique, not the engine.
When HA_DUPLICATE_POS is not supported, the row to replace was navigated by
ha_index_read_idx_map, which uses only hash to navigate.
Suchwise, given a hash collision it may choose an incorrect row.
handler::position would be correct and very convenient to use here.
dup_ref is already set by handler independently of the engine
capabilities, when an extra lookup is made (for long unique or something else,
for example WITHOUT OVERLAPS) such error will be indicated by
file->lookup_errkey != -1.
The two I_S plugins SPIDER_ALLOC_MEM and SPIDER_WRAPPER_PROTOCOL
only makes sense if the main SPIDER plugin is installed. Further,
SPIDER_ALLOC_MEM requires a mutex that requires SPIDER init to fill
the table.
We also update the spider init query to override
--transaction_read_only=on so that it does not affect the spider init.
Also fixed error handling in spider_db_init() so that failure in
spider table init does not result in memory leak
create_partitioning_metadata() should only mark transaction r/w
if it actually did anything (that is, the table is partitioned).
otherwise it's a no-op, called even for temporary tables and
it shouldn't do anything at all
Problem was too tight condition on ha_commit_trans to not
allow non transactional storage engines participate 2pc
in Galera case. This is required because transaction
using e.g. procedures might read mysql.proc table inside
a trasaction and these tables use at the moment Aria
storage engine that does not support 2pc.
Fixed by allowing read only transactions to storage
engines that do not support two phase commit to participate
2pc transaction. These will be committed later separately.
Signed-off-by: Julius Goryavsky <julius.goryavsky@mariadb.com>
Fix in this commit handles foreign key value appending into write set
so that db and table names are converted from the filepath format
to tablename format. This is compatible with key values appended from
elsewhere in the code base
There is a mtr test galera.galera_table_with_hyphen for regression testing
Reviewer: monty@mariadb.com
Aria temporary tables account allocated memory as specific to the current
THD. But this fails for slave threads, where the temporary tables need to be
detached from any specific THD.
Introduce a new flag to mark temporary tables in replication as "global",
and use that inside Aria to not account memory allocations as thread
specific for such tables.
Based on original suggestion by Monty.
Reviewed-by: Monty <monty@mariadb.org>
Signed-off-by: Kristian Nielsen <knielsen@knielsen-hq.org>
MDEV-33308 CHECK TABLE is modifying .frm file even if --read-only
As noted in commit d0ef1aaf61,
MySQL as well as older versions of MariaDB server would during
ALTER TABLE ... IMPORT TABLESPACE write bogus values to the
PAGE_MAX_TRX_ID field to pages of the clustered index, instead of
letting that field remain 0.
In commit 8777458a6e this field
was repurposed for PAGE_ROOT_AUTO_INC in the clustered index root page.
To avoid trouble when upgrading from MySQL or older versions of MariaDB,
we will try to detect and correct bogus values of PAGE_ROOT_AUTO_INC
when opening a table for the first time from the SQL layer.
btr_read_autoinc_with_fallback(): Add the parameters to mysql_version,max
to indicate the TABLE_SHARE::mysql_version of the .frm file and the
maximum value allowed for the type of the AUTO_INCREMENT column.
In case the table was originally created in MySQL or an older version of
MariaDB, read also the maximum value of the AUTO_INCREMENT column from
the table and reset the PAGE_ROOT_AUTO_INC if it is above the limit.
dict_table_t::get_index(const dict_col_t &) const: Find an index that
starts with the specified column.
ha_innobase::check_for_upgrade(): Return HA_ADMIN_FAILED if InnoDB
needs upgrading but is in read-only mode. In this way, the call to
update_frm_version() will be skipped.
row_import_autoinc(): Adjust the AUTO_INCREMENT column at the end of
ALTER TABLE...IMPORT TABLESPACE. This refinement was suggested by
Debarun Banerjee.
The changes outside InnoDB were developed by Michael 'Monty' Widenius:
Added print_check_msg() service for easy reporting of check/repair messages
in ENGINE=Aria and ENGINE=InnoDB.
Fixed that CHECK TABLE do not update the .frm file under --read-only.
Added 'handler_flags' to HA_CHECK_OPT as a way for storage engines to
store state from handler::check_for_upgrade().
Reviewed by: Debarun Banerjee
Problem was that REPLACE was using consistency check that started
TOI and we tried to rollback it.
Do not use wsrep_before_rollback and wsrep_after_rollback if
we are runing consistency check because no writeset keys are
in that case added. Do not allow consistency check usage
if table storage for target table is not InnoDB, instead
give warning. REPLACE|SELECT INTO ... SELECT will use
now TOI if table storage for target table is not InnoDB
to maintain consistency between galera nodes.
Signed-off-by: Julius Goryavsky <julius.goryavsky@mariadb.com>
Since 0930eb86cb, system table creation
needed for spider init is delayed to the signal_ddl_recovery_done
callback. Since it is part of the init, failure should result in
spider deinit.
We also remove the call to spider_init_system_tables() from
spider_db_init(), as it was removed in the commit mentioned above and
accidentally restored in a merge.
use signal_ddl_recovery_done callback for that.
also make the server to call signal_ddl_recovery_done() when loading
plugins at run-time (so that plugins would't need to detect that
on their own)
calculate auto-inc value even if long duplicate check fails -
this is what the engine does for normal uniques.
auto-inc value is needed if it's a REPLACE
Problem:
=========
During commit, server calls prepare_commit_versioned to
determine the transaction modified system-versioned data.
Due to binlog_do_db option, we disable the binlog for the
statement. But prepare_commit_versioned() is being
called only when binlog is enabled for the statement.
Fix:
===
prepare_commit_versioned() should happen irrespective
of binlog state. So if the server has any read-write operation
then we should call prepare_commit_versioned().
mark old keys in the ALTER TABLE with the `old` flag, not with
the `key_create_info.check_for_duplicate_indexes`.
This allows to mark old foreign keys too.
We introduce simple plugin dependency. A plugin init function may
return HA_ERR_RETRY_INIT. If this happens during server startup when
the server is trying to initialise all plugins, the failed plugins
will be retried, until no more plugins succeed in initialisation or
want to be retried.
This will fix spider init bugs which is caused in part by its
dependency on Aria for initialisation.
The reason we need a new return code, instead of treating every
failure as a request for retry, is that it may be impossible to clean
up after a failed plugin initialisation. Take InnoDB for example, it
has a global variable `buf_page_cleaner_is_active`, which may not
satisfy an assertion during a second initialisation try, probably
because InnoDB does not expect the initialisation to be called
twice.
The problem was an incorrect unmark_start_commit() in
signal_error_to_sql_driver_thread(). If an event group gets an error, this
unmark could run after the following GCO started, and the subsequent
re-marking could access de-allocated GCO.
The offending unmark_start_commit() looks obviously incorrect, and the fix
is to just remove it. It was introduced in the MDEV-8302 patch, the commit
message of which suggests it was added there solely to satisfy an assertion
in ha_rollback_trans(). So update this assertion instead to not trigger for
event groups that experienced an error (rgi->worker_error). When an error
occurs in an event group, all following event groups are skipped anyway, so
the unmark should never be needed in this case.
Reviewed-by: Andrei Elkin <andrei.elkin@mariadb.com>
Signed-off-by: Kristian Nielsen <knielsen@knielsen-hq.org>
Where a read-only server permits writes through replication, it
should not permit user connections to commit/rollback XA
transactions prepared via replication. The bug reported in
MDEV-30978 shows that this can happen. This is because there is no
read only check in the XA transaction logic, the most relevant one
occurs in ha_commit_trans() for normal statements/transactions.
This patch extends the XA transaction logic to check the read only
status of the server before performing an XA COMMIT or ROLLBACK.
Reviewed By:
Andrei Elkin <andrei.elkin@mariadb.com>
The new statistics is enabled by adding the "engine", "innodb" or "full"
option to --log-slow-verbosity
Example output:
# Pages_accessed: 184 Pages_read: 95 Pages_updated: 0 Old_rows_read: 1
# Pages_read_time: 17.0204 Engine_time: 248.1297
Page_read_time is time doing physical reads inside a storage engine.
(Writes cannot be tracked as these are usually done in the background).
Engine_time is the time spent inside the storage engine for the full
duration of the read/write/update calls. It uses the same code as
'analyze statement' for calculating the time spent.
The engine statistics is done with a generic interface that should be
easy for any engine to use. It can also easily be extended to provide
even more statistics.
Currently only InnoDB has counters for Pages_% and Undo_% status.
Engine_time works for all engines.
Implementation details:
class ha_handler_stats holds all engine stats. This class is included
in handler and THD classes.
While a query is running, all statistics is updated in the handler. In
close_thread_tables() the statistics is added to the THD.
handler::handler_stats is a pointer to where statistics should be
collected. This is set to point to handler::active_handler_stats if
stats are requested. If not, it is set to 0.
handler_stats has also an element, 'active' that is 1 if stats are
requested. This is to allow engines to avoid doing any 'if's while
updating the statistics.
Cloned or partition tables have the pointer set to the base table if
status are requested.
There is a small performance impact when using --log-slow-verbosity=engine:
- All engine calls in 'select' will be timed.
- IO calls for InnoDB reads will be timed.
- Incrementation of counters are done on local variables and accesses
are inline, so these should have very little impact.
- Statistics has to be reset for each statement for the THD and each
used handler. This is only 40 bytes, which should be neglectable.
- For partition tables we have to loop over all partitions to update
the handler_status as part of table_init(). Can be optimized in the
future to only do this is log-slow-verbosity changes. For this to work
we have to update handler_status for all opened partitions and
also for all partitions opened in the future.
Other things:
- Added options 'engine' and 'full' to log-slow-verbosity.
- Some of the new files in the test suite comes from Percona server, which
has similar status information.
- buf_page_optimistic_get(): Do not increment any counter, since we are
only validating a pointer, not performing any buf_pool.page_hash lookup.
- Added THD argument to save_explain_data_intern().
- Switched arguments for save_explain_.*_data() to have
always THD first (generates better code as other functions also have THD
first).
MDEV-29253 Detect incompatible MySQL partition scheme and either convert
them or report to user and in error log.
This task is about converting in place MySQL 5.6 and 5.7 partition tables
to MariaDB as part of mariadb-upgrade.
- Update TABLE_SHARE::init_from_binary_frm_image() to be able to read
MySQL frm files with partitions.
- Create .par file, if it do not exists, on open of partitioned table.
Executing mariadb-upgrade will create all the missing .par files.
The MySQL .frm file will be changed to MariaDB format after next
ALTER TABLE.
Other changes:
- If we are using stored mysql_version to distingush between MySQL and
MariaDB .frm file information, do not upgrade mysql_version in the
.frm file as part of CHECK TABLE .. FOR UPGRADE as this would cause
problems next time we parse the .frm file.
