to 5.1 partially. This patch brings what was left to mysql-next-mr.
Original revisions in 6.0:
------------------------------------------------------------
revno: 2617.31.26
committer: Alexander Nozdrin <alik@sun.com>
branch nick: 6.0-rt-bug43138.3
timestamp: Thu 2009-04-30 19:31:30 +0400
message:
Fix for Bug#43138: DROP DATABASE failure does not clean up message list.
The problem was that the high-level function mysql_rm_db() invoked
low-level mysql_rm_table_part2(), which reported low-level error
(Unknown table) if SE refused to delete a table. Also when
mysql_rm_table_part2() reported an error, it didn't add corresponding
warning into the list (because it is used from other places where such
behaviour is required).
The fix is to
1. Remove no_warnings_for_error usage from sql_table.cc
2. Improve internal error handler support in THD, so that
a stack of error handlers is allowed.
3. Create an internal error handler (Drop_table_error_handler)
to silence useless warnings.
4. Use the handler in DROP DATABASE and DROP TABLE statements.
------------------------------------------------------------
revno: 2617.69.38
committer: Alexander Nozdrin <alik@sun.com>
branch nick: mysql-next-bugfixing-bug37431
timestamp: Mon 2009-08-24 21:52:09 +0400
message:
A test case for Bug#37431 (DROP TABLE does not report errors correctly).
------------------------------------------------------------
revno: 2617.31.29
committer: Dmitry Lenev <dlenev@mysql.com>
branch nick: mysql-6.0-runtime
timestamp: Fri 2009-05-01 17:37:34 +0400
message:
Follow-up for fix for bug "Bug#43138: DROP DATABASE failure
does not clean up message list".
Fixed drop.test failure under non-debug server by moving part
of test dependent on debug-only feature to separate .test file,
which won't be run for non-debug versions of server.
------------------------------------------------------------
revno: 2617.45.17
committer: Sergei Golubchik <serg@mysql.com>
branch nick: 6.0-maria
timestamp: Wed 2009-05-13 20:08:58 +0200
message:
followup for bug#43138
if delete fails with a permission denied error, we want to show it
------------------------------------------------------------
The patch was backported to 5.1 in scope of Bug#42364 by
the following revision:
------------------------------------------------------------
revno: 2497.975.3
committer: Sergey Glukhov <Sergey.Glukhov@sun.com>
branch nick: mysql-5.1-bugteam
timestamp: Fri 2009-07-03 13:22:06 +0500
message:
Bug#42364 SHOW ERRORS returns empty resultset after dropping non existent table
enabled message storing into error message list
for 'drop table' command
------------------------------------------------------------
2630.39.1, 2630.28.29, 2630.34.3, 2630.34.2, 2630.34.1, 2630.29.29,
2630.29.28, 2630.31.1, 2630.28.13, 2630.28.10, 2617.23.14 and
some other minor revisions.
This patch implements:
WL#4264 "Backup: Stabilize Service Interface" -- all the
server prerequisites except si_objects.{h,cc} themselves (they can
be just copied over, when needed).
WL#4435: Support OUT-parameters in prepared statements.
(and all issues in the initial patches for these two
tasks, that were discovered in pushbuild and during testing).
Bug#39519: mysql_stmt_close() should flush all data
associated with the statement.
After execution of a prepared statement, send OUT parameters of the invoked
stored procedure, if any, to the client.
When using the binary protocol, send the parameters in an additional result
set over the wire. When using the text protocol, assign out parameters to
the user variables from the CALL(@var1, @var2, ...) specification.
The following refactoring has been made:
- Protocol::send_fields() was renamed to Protocol::send_result_set_metadata();
- A new Protocol::send_result_set_row() was introduced to incapsulate
common functionality for sending row data.
- Signature of Protocol::prepare_for_send() was changed: this operation
does not need a list of items, the number of items is fully sufficient.
The following backward incompatible changes have been made:
- CLIENT_MULTI_RESULTS is now enabled by default in the client;
- CLIENT_PS_MULTI_RESUTLS is now enabled by default in the client.
include/mysql.h:
Add a new flag to MYSQL_METHODS::flush_use_result
function pointer. This flag determines if all results
should be flushed or only the first one:
- if flush_all_results is TRUE, then cli_flush_use_result()
will read/flush all pending results. I.e. it will read
all packets while server status attribute indicates that
there are more results. This is a new semantic, required
to fix the bug.
- if flush_all_results is FALSE, the old sematic
is preserved -- i.e. cli_flush_use_result() reads data
until first EOF-packet.
include/mysql.h.pp:
Update the ABI with new calls (compatible changes).
include/mysql_com.h:
Add CLIENT_PS_OUT_PARAMS -- a client capability indicating that the client supportsю
libmysql/libmysql.c:
Add mysql_stmt_next_result() -- analogue of mysql_next_result() for binary protocol.
Fix a minor bug in alloc_fields() -- not all members were copied over,
and some only shallow-copied (catalog).
Flush all results in mysql_stmt_close() (Bug#39519).
libmysqld/lib_sql.cc:
Rename send_fields() -> send_result_set_metadata().
Refactoring: change prepare_for_send() so that it accepts only
what it really needs -- a number of elements in the list.
mysql-test/r/ps.result:
Update results: WL#4435.
mysql-test/t/ps.test:
WL#4435: A test case for an SQL-part of the problem.
sql-common/client.c:
Bug#39519.
Implement new functionality in cli_flush_use_result():
if flush_all_delete is TRUE, then it should read/flush
all pending results.
sql/Makefile.am:
Add a new header sql_prepare.h to the list
of build headers.
sql/events.cc:
Rename: Protocol::send_fields() ->
Protocol::send_result_set_metadata().
sql/handler.cc:
Rename: Protocol::send_fields() ->
Protocol::send_result_set_metadata().
sql/mysql_priv.h:
Move sql_prepare.cc-specific declarations to a new
header - sql_prepare.h.
sql/procedure.h:
Rename: Protocol::send_fields() ->
Protocol::send_result_set_metadata().
sql/protocol.cc:
Move the logic responsible for sending of one result
set row to the Protocol class. Define a template
for end-of-statement action.
Refactoring: change prepare_for_send() so that it accepts
only what it really needs -- a number of elements in the list.
Rename send_fields() to send_result_set_metadata().
sql/protocol.h:
Update with new declarations (WL#4435).
Rename send_fields() -> send_result_set_metadata().
prepare_for_send() only needs the number of columns to send,
and doesn't use the item list - update signature to require
only what's needed.
Add a new protocol type -- Protocol_local.
sql/repl_failsafe.cc:
Rename: Protocol::send_fields() ->
Protocol::send_result_set_metadata().
sql/slave.cc:
Rename: Protocol::send_fields() ->
Protocol::send_result_set_metadata().
sql/sql_acl.cc:
Rename: Protocol::send_fields() ->
Protocol::send_result_set_metadata().
sql/sql_base.cc:
Include sql_prepare.h (for Reprepare_observer).
sql/sql_cache.cc:
Extend the query cache flags block to be able
to store a numeric id for the result format,
not just a flag binary/non-binary.
sql/sql_class.cc:
Update to use the rename of Protocol::send_fields()
to Protocol::send_result_set_metadata().
Use Protocol::send_one_result_set_row().
sql/sql_class.h:
Move the declaration of Reprepare_observer to the
new header - sql_prepare.h.
Update to the new signature of class Protocol::send_fields().
sql/sql_connect.cc:
Use a protocol template method instead of
raw NET layer API at the end of a statement.
sql/sql_cursor.cc:
Rename: Protocol::send_fields() ->
Protocol::send_result_set_metadata().
sql/sql_error.cc:
Rename: Protocol::send_fields() ->
Protocol::send_result_set_metadata().
sql/sql_handler.cc:
Rename: Protocol::send_fields() ->
Protocol::send_result_set_metadata().
Use new method Protocol::send_one_result_set_row().
sql/sql_help.cc:
Rename: Protocol::send_fields() ->
Protocol::send_result_set_metadata().
sql/sql_lex.cc:
Initialize multi_statements variable.
Add a handy constant for empty lex
string.
sql/sql_lex.h:
Add a separate member for a standalone
parsing option - multi-statements support.
sql/sql_list.cc:
sql_list.h is a standalone header now,
no need to include mysql_priv.h.
sql/sql_list.h:
Make sql_list.h a stand-alone header.
sql/sql_parse.cc:
Include sql_prepare.h for prepared
statements- related declarations.
Use a new Protocol template method to end
each statement (send OK, EOF or ERROR to
the client).
sql/sql_prepare.cc:
Implement Execute Direct API (WL#4264),
currently unused. It will be used by the service
interface (Backup).
Use a new header - sql_prepare.h.
Add support for OUT parameters in the
binary and text protocol (prepared statements
only).
sql/sql_prepare.h:
Add a new header to contain (for now)
all prepared statement- external
related declarations.
sql/sql_profile.cc:
Rename: Protocol::send_fields() ->
Protocol::send_result_set_metadata().
sql/sql_repl.cc:
Rename: Protocol::send_fields() ->
Protocol::send_result_set_metadata().
sql/sql_select.cc:
Rename: Protocol::send_fields() ->
Protocol::send_result_set_metadata().
sql/sql_show.cc:
Rename: Protocol::send_fields() ->
Protocol::send_result_set_metadata().
sql/sql_string.h:
Add a way to convert a String to LEX_STRING.
sql/sql_table.cc:
Rename: Protocol::send_fields() ->
Protocol::send_result_set_metadata().
sql/sql_update.cc:
Remove an extraneous my_error(). The error
is already reported in update_non_unique_table_error().
sql/sql_yacc.yy:
Support for multi-statements is an independent
property of parsing, not derived from
the protocol type.
tests/mysql_client_test.c:
Add tests for WL#4435 (binary protocol).
local storage for query cache).
We need more than one pointer in a thread to
represent the query cache and net->query_cache_query can not be used
any more (due to ABI compatibility issues and to different life
time of NET and THD).
This is a backport of the following patch from 6.0:
----------------------------------------------------------
revno: 2476.1157.2
committer: kostja@bodhi.(none)
timestamp: Sat 2007-06-16 13:29:24 +0400
include/mysql.h.pp:
Update the ABI (NET::query_cache_query is now unused).
include/mysql_com.h:
NET::query_cache_query is now unused.
sql/mysql_priv.h:
Update signatures of ex-functios now member functions.
sql/sql_cache.cc:
Introduce THD::query_cache_tls.
sql/sql_cache.h:
Introduce THD::query_cache_tls.
sql/sql_class.cc:
Introduce THD::query_cache_tls.
sql/sql_class.h:
Introduce THD::query_cache_tls.
sql/sql_parse.cc:
Use THD::query_cache_tls.
sql/sql_select.cc:
Use THD::query_cache_tls.
case than in corr index".
Server was unable to find existing or explicitly created supporting
index for foreign key if corresponding statement clause used field
names in case different than one used in key specification and created
yet another supporting index.
In cases when name of constraint (and thus name of generated index)
was the same as name of existing/explicitly created index this led
to duplicate key name error.
The problem was that unlike all other code Key_part_spec::operator==()
compared field names in case sensitive fashion. As result routines
responsible for getting rid of redundant generated supporting indexes
for foreign key were not working properly for versions of field names
using different cases.
mysql-test/r/innodb_mysql.result:
Added test case for bug #39932 "create table fails if column for FK
is in different case than in corr index".
mysql-test/t/innodb_mysql.test:
Added test case for bug #39932 "create table fails if column for FK
is in different case than in corr index".
sql/sql_class.cc:
Make field name comparison case-insensitive like it is
in the rest of server.
storing and restoring information about foreign keys in the .FRM files and
properly displaying it in SHOW CREATE TABLE output and I_S tables.
The idea of this patch is to change type of Key_part_spec::field_name and
Key::name to LEX_STRING in order to avoid extra strlen() calls during
semantic analysis and statement execution, particularly, in code to be
implemented on the 2nd milestone of WL#148.
Note that since we are not using LEX_STRING everywhere yet (e.g. in
Create_field and KEY) and we want to limit scope of our changes we
have to do strlen() in places where we create Key and Key_part_spec
instances from objects using plain (char*) for strings. These calls
will go away during the process of further (char*) -> LEX_STRING
refactoring.
We have introduced these changes in 6.0 and backported them to 5.5
tree to make people aware of these changes as early as possible and
to simplify merges with mysql-fk and mysql-6.1-fk trees.
No test case is needed since this patch does not introduce any
user visible changes.
sql/sql_class.cc:
Key_part_spec::field_name is now LEX_STRING. Adjusted code accordingly.
sql/sql_class.h:
Changed type of Key_part_spec::field_name and Key::name to LEX_STRING in
order to avoid extra strlen() calls in code responsible for semantic
analysis and statement execution (e.g. in future code responsible for
saving/restoring info about foreign keys).
sql/sql_lex.cc:
Moved null_lex_str from sql_yacc.yy to sql_lex.cc and added its
declaration to sql_lex.h to make it accessible in other SQL-layer
modules (e.g. sql_parse.cc).
sql/sql_lex.h:
Made null_lex_str accessible from outside of sql_lex.cc.
sql/sql_parse.cc:
Key_part_spec::field_name and Key::name are now LEX_STRING. Adjusted
code accordingly.
sql/sql_table.cc:
Adjusted code to accomodate change of type to LEX_STRING for
Key_part_spec::field_name and Key::name.
sql/sql_yacc.yy:
Now Key::name and Key_part_spec::field_name are LEX_STRINGs. Adjusted
grammar to be able properly initialize them. This should allow us to
save on some strlen() calls during later stages of statement execution.
"have_profiling"
1) Renamed have_community_features server system variable to
have_profiling.
2) Removed eable-community-features configure option and
ENABLE_COMMUNITY_FEATURES macro.
3) Removed COMMUNITY_SERVER macro and replaced its usage by
ENABLED_PROFILING.
Only --enable-profiling is now needed to enable profiling.
It was the only existing "community feature", so there was
no need for both configure options.
Using --enable-community-features will give a warning message
since it no longer exists.
Backport from 6.0 to 5.1.
Only those sync points are included, which are used in debug_sync.test.
The Debug Sync Facility allows to place synchronization points
in the code:
open_tables(...)
DEBUG_SYNC(thd, "after_open_tables");
lock_tables(...)
When activated, a sync point can
- Send a signal and/or
- Wait for a signal
Nomenclature:
- signal: A value of a global variable that persists
until overwritten by a new signal. The global
variable can also be seen as a "signal post"
or "flag mast". Then the signal is what is
attached to the "signal post" or "flag mast".
- send a signal: Assign the value (the signal) to the global
variable ("set a flag") and broadcast a
global condition to wake those waiting for
a signal.
- wait for a signal: Loop over waiting for the global condition until
the global value matches the wait-for signal.
Please find more information in the top comment in debug_sync.cc
or in the worklog entry.
.bzrignore:
WL#4259 - Debug Sync Facility
Added the symbolic link libmysqld/debug_sync.cc.
CMakeLists.txt:
WL#4259 - Debug Sync Facility
Added definition for ENABLED_DEBUG_SYNC.
configure.in:
WL#4259 - Debug Sync Facility
Added definition for ENABLED_DEBUG_SYNC.
include/my_sys.h:
WL#4259 - Debug Sync Facility
Added definition for the DEBUG_SYNC_C macro.
libmysqld/CMakeLists.txt:
WL#4259 - Debug Sync Facility
Added sql/debug_sync.cc.
libmysqld/Makefile.am:
WL#4259 - Debug Sync Facility
Added sql/debug_sync.cc.
mysql-test/include/have_debug_sync.inc:
WL#4259 - Debug Sync Facility
New include file.
mysql-test/mysql-test-run.pl:
WL#4259 - Debug Sync Facility
Added option --debug_sync_timeout.
mysql-test/r/debug_sync.result:
WL#4259 - Debug Sync Facility
New test result.
mysql-test/r/have_debug_sync.require:
WL#4259 - Debug Sync Facility
New require file.
mysql-test/t/debug_sync.test:
WL#4259 - Debug Sync Facility
New test file.
mysys/my_static.c:
WL#4259 - Debug Sync Facility
Added definition for debug_sync_C_callback_ptr.
mysys/thr_lock.c:
WL#4259 - Debug Sync Facility
Added sync point "wait_for_lock".
sql/CMakeLists.txt:
WL#4259 - Debug Sync Facility
Added debug_sync.cc and debug_sync.h.
sql/Makefile.am:
WL#4259 - Debug Sync Facility
Added debug_sync.cc and debug_sync.h.
sql/debug_sync.cc:
WL#4259 - Debug Sync Facility
New source file.
sql/debug_sync.h:
WL#4259 - Debug Sync Facility
New header file.
sql/mysqld.cc:
WL#4259 - Debug Sync Facility
Added opt_debug_sync_timeout.
Added calls to debug_sync_init() and debug_sync_end().
Fixed a purecov comment (unrelated).
sql/set_var.cc:
WL#4259 - Debug Sync Facility
Added server variable "debug_sync".
sql/set_var.h:
WL#4259 - Debug Sync Facility
Added declaration for server variable "debug_sync".
sql/share/errmsg.txt:
WL#4259 - Debug Sync Facility
Added error messages ER_DEBUG_SYNC_TIMEOUT and ER_DEBUG_SYNC_HIT_LIMIT.
sql/sql_base.cc:
WL#4259 - Debug Sync Facility
Added sync points "after_flush_unlock" and "before_lock_tables_takes_lock".
sql/sql_class.cc:
WL#4259 - Debug Sync Facility
Added initialization for debug_sync_control to THD::THD.
Added calls to debug_sync_init_thread() and debug_sync_end_thread().
sql/sql_class.h:
WL#4259 - Debug Sync Facility
Added element debug_sync_control to THD.
storage/myisam/myisamchk.c:
Fixed a typo in an error message string (unrelated).
partial backport of bug43138 fix
mysql-test/r/warnings.result:
test result
mysql-test/t/warnings.test:
test case
sql/sql_class.cc:
partial backport of bug43138 fix
sql/sql_class.h:
partial backport of bug43138 fix
sql/sql_table.cc:
partial backport of bug43138 fix
when used with --tab
1) New syntax: added CHARACTER SET clause to the
SELECT ... INTO OUTFILE (to complement the same clause in
LOAD DATA INFILE).
mysqldump is updated to use this in --tab mode.
2) ESCAPED BY/ENCLOSED BY field parameters are documented as
accepting CHAR argument, however SELECT .. INTO OUTFILE
silently ignored rests of multisymbol arguments.
For the symmetrical behavior with LOAD DATA INFILE the
server has been modified to fail with the same error:
ERROR 42000: Field separator argument is not what is
expected; check the manual
3) Current LOAD DATA INFILE recognizes field/line separators
"as is" without converting from client charset to data
file charset. So, it is supposed, that input file of
LOAD DATA INFILE consists of data in one charset and
separators in other charset. For the compatibility with
that [buggy] behaviour SELECT INTO OUTFILE implementation
has been saved "as is" too, but the new warning message
has been added:
Non-ASCII separator arguments are not fully supported
This message warns on field/line separators that contain
non-ASCII symbols.
client/mysqldump.c:
mysqldump has been updated to call SELECT ... INTO OUTFILE
statement with a charset from the --default-charset command
line parameter.
mysql-test/r/mysqldump.result:
Added test case for bug #30946.
mysql-test/r/outfile_loaddata.result:
Added test case for bug #30946.
mysql-test/t/mysqldump.test:
Added test case for bug #30946.
mysql-test/t/outfile_loaddata.test:
Added test case for bug #30946.
sql/field.cc:
String conversion code has been moved from check_string_copy_error()
to convert_to_printable() for reuse.
sql/share/errmsg.txt:
New WARN_NON_ASCII_SEPARATOR_NOT_IMPLEMENTED message has been added.
sql/sql_class.cc:
The select_export::prepare() method has been modified to:
1) raise the ER_WRONG_FIELD_TERMINATORS error on multisymbol
ENCLOSED BY/ESCAPED BY field arguments like LOAD DATA INFILE;
2) warn with a new WARN_NON_ASCII_SEPARATOR_NOT_IMPLEMENTED
message on non-ASCII field or line separators.
The select_export::send_data() merhod has been modified to
convert item data to output charset (see new SELECT INTO OUTFILE
syntax). By default the BINARY charset is used for backward
compatibility.
sql/sql_class.h:
The select_export::write_cs field added to keep output
charset.
sql/sql_load.cc:
mysql_load has been modified to warn on non-ASCII field or
line separators with a new WARN_NON_ASCII_SEPARATOR_NOT_IMPLEMENTED
message.
sql/sql_string.cc:
New global function has been added: convert_to_printable()
(common code has been moved from check_string_copy_error()).
sql/sql_string.h:
New String::is_ascii() method and new global convert_to_printable()
function have been added.
sql/sql_yacc.yy:
New syntax: added CHARACTER SET clause to the
SELECT ... INTO OUTFILE (to complement the same clause in
LOAD DATA INFILE). By default the BINARY charset is used for
backward compatibility.
If using statement based replication (SBR), repeatedly calling
statements which are unsafe for SBR will cause a warning message
to be written to the error for each statement. This might lead
to filling up the error log and there is no way to disable this
behavior.
The solution is to only log these message (about statements unsafe
for statement based replication) if the log_warnings option is set.
For example:
SET GLOBAL LOG_WARNINGS = 0;
INSERT INTO t1 VALUES(UUID());
SET GLOBAL LOG_WARNINGS = 1;
INSERT INTO t1 VALUES(UUID());
In this case the message will be printed only once:
[Warning] Statement may not be safe to log in statement format.
Statement: INSERT INTO t1 VALUES(UUID())
mysql-test/suite/binlog/r/binlog_stm_unsafe_warning.result:
Add test case result for Bug#46265
mysql-test/suite/binlog/t/binlog_stm_unsafe_warning-master.opt:
Make log_error value available.
mysql-test/suite/binlog/t/binlog_stm_unsafe_warning.test:
Add test case for Bug#46265
sql/sql_class.cc:
Print warning only if the log_warnings is enabled.
procedures causes crashes!
The problem of that bugreport was mostly fixed by the
patch for bug 38691.
However, attached test case focused on another crash or
valgrind warning problem: SHOW PROCESSLIST query accesses
freed memory of SP instruction that run in a parallel
connection.
Changes of thd->query/thd->query_length in dangerous
places have been guarded with the per-thread
LOCK_thd_data mutex (the THD::LOCK_delete mutex has been
renamed to THD::LOCK_thd_data).
sql/ha_myisam.cc:
Bug #38816: kill + flush tables with read lock + stored
procedures causes crashes!
Modification of THD::query/query_length has been guarded
with the a THD::set_query() method call/LOCK_thd_data
mutex.
Unnecessary locking with the global LOCK_thread_count
mutex has been removed.
sql/log_event.cc:
Bug #38816: kill + flush tables with read lock + stored
procedures causes crashes!
Modification of THD::query/query_length has been guarded
with the THD::set_query()) method call/LOCK_thd_data
mutex.
sql/slave.cc:
Bug #38816: kill + flush tables with read lock + stored
procedures causes crashes!
Modification of THD::query/query_length has been guarded
with the THD::set_query() method call/LOCK_thd_data mutex.
The THD::LOCK_delete mutex has been renamed to
THD::LOCK_thd_data.
sql/sp_head.cc:
Bug #38816: kill + flush tables with read lock + stored
procedures causes crashes!
Modification of THD::query/query_length has been guarded
with the a THD::set_query() method call/LOCK_thd_data
mutex.
sql/sql_class.cc:
Bug #38816: kill + flush tables with read lock + stored
procedures causes crashes!
The new THD::LOCK_thd_data mutex and THD::set_query()
method has been added to guard modifications of THD::query/
THD::query_length fields, also the Statement::set_statement()
method has been overloaded in the THD class.
The THD::LOCK_delete mutex has been renamed to
THD::LOCK_thd_data.
sql/sql_class.h:
Bug #38816: kill + flush tables with read lock + stored
procedures causes crashes!
The new THD::LOCK_thd_data mutex and THD::set_query()
method has been added to guard modifications of THD::query/
THD::query_length fields, also the Statement::set_statement()
method has been overloaded in the THD class.
The THD::LOCK_delete mutex has been renamed to
THD::LOCK_thd_data.
sql/sql_insert.cc:
Bug #38816: kill + flush tables with read lock + stored
procedures causes crashes!
Modification of THD::query/query_length has been guarded
with the a THD::set_query() method call/LOCK_thd_data
mutex.
sql/sql_parse.cc:
Bug #38816: kill + flush tables with read lock + stored
procedures causes crashes!
Modification of THD::query/query_length has been guarded
with the a THD::set_query() method call/LOCK_thd_data mutex.
sql/sql_repl.cc:
Bug #38816: kill + flush tables with read lock + stored
procedures causes crashes!
The THD::LOCK_delete mutex has been renamed to
THD::LOCK_thd_data.
sql/sql_show.cc:
Bug #38816: kill + flush tables with read lock + stored
procedures causes crashes!
Inter-thread read of THD::query/query_length field has
been protected with a new per-thread LOCK_thd_data
mutex in the mysqld_list_processes function.
format." warnings
Despite the fact that a statement would be filtered out from binlog, a
warning would still be thrown if it was issued with the LIMIT.
This patch addresses this issue by checking the filtering rules before
printing out the warning.
mysql-test/suite/binlog/t/binlog_stm_unsafe_warning-master.opt:
Parameter to filter out database: "b42851".
mysql-test/suite/binlog/t/binlog_stm_unsafe_warning.test:
Added a new test case.
sql/sql_class.cc:
Added filtering rules check to condition used to decide whether to
printout warning or not.
such as quit and shutdown
Logging to slow log can produce an undetermined value for
Rows_examined in special cases. In debug mode this manifests
itself as any of the various marker values used to mark
uninitialized memory on various platforms.
If logging happens on a THD object that hasn't performed any
row reads (on this or any previous connections), the
THD::examined_row_count may be uninitialized. This patch adds
initialization for this attribute.
No automated test cases are added, as for this to be
meaningful, we need to ensure that we're using a THD
fulfilling the above conditions. This is hard to do in the
mysql-test-run framework. The patch has been verified
manually, however, by restarting mysqld and running the test
included with the bug report.
Remove custom DLL loader code from innodb plugin code, use
symbols exported from mysqld.
storage/innodb_plugin/handler/ha_innodb.cc:
Remove a Win32 workaround for current_thd.
The original problem that innodb plugin used
value of TLS variable across DLL boundaries is
solved in MySQL server (current_thd is a function
not TLS variable now)
storage/innodb_plugin/handler/handler0alter.cc:
Remove custom delay loader
storage/innodb_plugin/handler/handler0vars.h:
Remove custom delay loader
storage/innodb_plugin/handler/i_s.cc:
Remove custom delay loader
storage/innodb_plugin/handler/win_delay_loader.cc:
Remove custom delay loader
storage/innodb_plugin/plug.in:
Remove commented out MYSQL_PLUGIN_STATIC,
CMake would not parse that correctly
variable. The problem was that THD::connect_utime could be
used without being initialized when the main thread is used
to handle connections (--thread-handling=no-threads).
sql/mysqld.cc:
Set THD::start_utime even in no-threads handling mode.
sql/sql_class.cc:
Initialize variable.
sql/sql_class.h:
Rename connect_utime to prior_thr_create_utime as to
better reflect it's use intention.
sql/sql_connect.cc:
Check only if a thread was actually created.
Make the caller of Query_log_event, Execute_load_log_event
constructors and THD::binlog_query to provide the error code
instead of having the constructors to figure out the error code.
sql/log_event.cc:
Changed constructors of Query_log_event and Execute_load_log_event to accept the error code argument instead of figuring it out by itself
sql/log_event.h:
Changed constructors of Query_log_event and Execute_load_log_event to accept the error code argument
MySQL crashes if a user without proper privileges attempts to create a procedure.
The crash happens because more than one error state is pushed onto the Diagnostic
area. In this particular case the user is denied to implicitly create a new user
account with the implicitly granted privileges ALTER- and EXECUTE ROUTINE.
The new account is needed if the original user account contained a host mask.
A user account with a host mask is a distinct user account in this context.
An alternative would be to first get the most permissive user account which
include the current user connection and then assign privileges to that
account. This behavior change is considered out of scope for this bug patch.
The implicit assignment of privileges when a user creates a stored routine is a
considered to be a feature for user convenience and as such it is not
a critical operation. Any failure to complete this operation is thus considered
non-fatal (an error becomes a warning).
The patch back ports a stack implementation of the internal error handler interface.
This enables the use of multiple error handlers so that it is possible to intercept
and cancel errors thrown by lower layers. This is needed as a error handler already
is used in the call stack emitting the errors which needs to be converted.
mysql-test/r/grant.result:
* Added test case for bug44658
mysql-test/t/grant.test:
* Added test case for bug44658
sql/sp.cc:
* Removed non functional parameter no_error and my_error calls as all errors
from this function will be converted to a warning anyway.
* Change function return type from int to bool.
sql/sp.h:
* Removed non functional parameter no_error and my_error calls as all errors
from this function will be converted to a warning anyway.
* Changed function return value from int to bool
sql/sql_acl.cc:
* Removed the non functional no_error parameter from the function prototype.
The function is called from two places and in one of the places we now
ignore errors through error handlers.
* Introduced the parameter write_to_binlog
* Introduced an error handler to cancel any error state from mysql_routine_grant.
* Moved my_ok() signal from mysql_routine_grant to make it easier to avoid
setting the wrong state in the Diagnostic area.
* Changed the broken error state in sp_grant_privileges() to a warning
so that if "CREATE PROCEDURE" fails because "Password hash isn't a hexidecimal
number" it is still clear what happened.
sql/sql_acl.h:
* Removed the non functional no_error parameter from the function prototype.
The function is called from two places and in one of the places we now
ignore errors through error handlers.
* Introduced the parameter write_to_binlog
* Changed return type for sp_grant_privileges() from int to bool
sql/sql_class.cc:
* Back ported implementation of internal error handler from 6.0 branch
sql/sql_class.h:
* Back ported implementation of internal error handler from 6.0 branch
sql/sql_parse.cc:
* Moved my_ok() signal from mysql_routine_grant() to make it easier to avoid
setting the wrong state in the Diagnostic area.
Problem: storing "SELECT ... INTO @var ..." results in variables we used val_xxx()
methods which returned results of the current row.
So, in some cases (e.g. SELECT DISTINCT, GROUP BY or HAVING) we got data
from the first row of a new group (where we evaluate a clause) instead of
data from the last row of the previous group.
Fix: use val_xxx_result() counterparts to get proper results.
mysql-test/r/distinct.result:
Fix for bug#42009: SELECT into variable gives different results to direct SELECT
- results adjusted.
mysql-test/r/user_var.result:
Fix for bug#42009: SELECT into variable gives different results to direct SELECT
- test result.
mysql-test/t/user_var.test:
Fix for bug#42009: SELECT into variable gives different results to direct SELECT
- test case.
sql/item_func.cc:
Fix for bug#42009: SELECT into variable gives different results to direct SELECT
- Item_func_set_user_var::save_item_result() added to evaluate and store
an item's result into a user variable.
sql/item_func.h:
Fix for bug#42009: SELECT into variable gives different results to direct SELECT
- Item_func_set_user_var::save_item_result() added to evaluate and store
an item's result into a user variable.
sql/sql_class.cc:
Fix for bug#42009: SELECT into variable gives different results to direct SELECT
- use Item_func_set_user_var::save_item_result() to store results into user
variables.
Mysql server crashes because unsafe statements warning is wrongly elevated to error,
which is set the error status of Diagnostics_area of the thread in THD::binlog_query().
Yet the caller believes that binary logging shouldn't touch the status, so it will
set the status also later by my_ok(), my_error() or my_message() seperately
according to the execution result of the statement or transaction.
But the status of Diagnostics_area of the thread is allowed to set only once.
Fixed to clear the error wrongly set by binary logging, but keep the warning message.
mysql-test/suite/binlog/r/binlog_stm_ps.result:
Change unsafe warning to NOTE level
mysql-test/suite/binlog/r/binlog_unsafe.result:
Test case result for unsafe statements to ensure mysql sever don't crash
mysql-test/suite/binlog/t/binlog_unsafe.test:
Test case for unsafe statements to ensure mysql sever don't crash
mysql-test/suite/rpl/r/rpl_skip_error.result:
Change unsafe warning to NOTE level
mysql-test/suite/rpl/r/rpl_stm_loadfile.result:
Change unsafe warning to NOTE level
mysql-test/suite/rpl/r/rpl_udf.result:
Change unsafe warning to NOTE level
sql/sql_class.cc:
the error status of the thread is cleared When a warning is elevated to an error
because of unsafe warning of binary log.
due to name_const substitution
Problem:
"In general, statements executed within a stored procedure
are written to the binary log using the same rules that
would apply were the statements to be executed in standalone
fashion. Some special care is taken when logging procedure
statements because statement execution within procedures
is not quite the same as in non-procedure context".
For example, each reference to a local variable in SP's
statements is replaced by NAME_CONST(var_name, var_value).
Queries like
"CREATE TABLE ... SELECT FUNC(local_var ..."
are logged as
"CREATE TABLE ... SELECT FUNC(NAME_CONST("local_var", var_value) ..."
that leads to differrent field names and
might result in "Incorrect column name" if var_value is long enough.
Fix: in 5.x we'll issue a warning in such a case.
In 6.0 we should get rid of NAME_CONST().
Note: this issue and change should be described in the documentation
("Binary Logging of Stored Programs").
mysql-test/r/binlog.result:
Fix for bug#35383: binlog playback and replication breaks
due to name_const substitution
- test result.
mysql-test/t/binlog.test:
Fix for bug#35383: binlog playback and replication breaks
due to name_const substitution
- test case.
sql/sp_head.cc:
Fix for bug#35383: binlog playback and replication breaks
due to name_const substitution
- set thd->query_name_consts if there's NAME_CONST()
substitution(s).
sql/sql_parse.cc:
Fix for bug#35383: binlog playback and replication breaks
due to name_const substitution
- issue a warning if there's NAME_CONST() substitution and
binary logging is on for "CREATE TABLE ... SELECT ...".
manual merge. also adds test specific to 5.1+
mysql-test/suite/rpl/r/rpl_temporary.result:
show that a non-privileged user trying to
kill system-threads no longer crashes the
server. test in 5.1+ only.
mysql-test/suite/rpl/t/rpl_temporary.test:
show that a non-privileged user trying to
kill system-threads no longer crashes the
server. test in 5.1+ only.
sql/sql_class.cc:
manual merge
sql/sql_class.h:
manual merge
sql/sql_parse.cc:
manual merge
Fine-tuning. Broke out comparison into method by
suggestion of Davi. Clarified comments. Reverting
test-case which I find too brittle; proper test
case in 5.1+.
This is a back port from 5.1 to 5.0.
Fix for BUG 20023: mysql_change_user() resets the value
of SQL_BIG_SELECTS.
The bug was that SQL_BIG_SELECTS was not properly set
in COM_CHANGE_USER.
The fix is to update SQL_BIG_SELECTS properly.
sql/sql_class.cc:
Update THD::options with the respect to SQL_BIG_SELECTS
in COM_CHANGE_USER.
tests/mysql_client_test.c:
Add a test case BUG#20023.
When binlog_format is STATEMENT and the statement is unsafe before,
the unsafe warning/error message was issued without checking
whether the SQL_LOG_BIN was turned on or not.
Fixed with adding a sql_log_bin_toplevel flag in THD to check
whether SQL_LOG_BIN is ON in current session whatever the current is in sp or not.
mysql-test/suite/binlog/r/binlog_unsafe.result:
Test case result for unsafe warning/error message
mysql-test/suite/binlog/t/binlog_unsafe.test:
Test case for unsafe message warning/error
sql/set_var.cc:
Adding a function set_option_log_bin_bit() which specailly handles to
the change of SQL_LOG_BIN bit in order to set sql_log_bin_toplevel
according to SQL_LOG_BIN current value at the same time.
sql/sql_class.cc:
Initialize the flag sql_log_bin_toplevel in THD::init(),
and add the condition to check whether unsafe ror message was issued.
sql/sql_class.h:
Add a sql_log_bin_toplevel flag in THD to indicate whether the toplevel SQL_LOG_BIN is
Problem: storing "SELECT ... INTO @var ..." results in variables we used val_xxx()
methods which returned results of the current row.
So, in some cases (e.g. SELECT DISTINCT, GROUP BY or HAVING) we got data
from the first row of a new group (where we evaluate a clause) instead of
data from the last row of the previous group.
Fix: use val_xxx_result() counterparts to get proper results.
mysql-test/r/distinct.result:
Fix for bug#42009: SELECT into variable gives different results to direct SELECT
- results adjusted.
mysql-test/r/user_var.result:
Fix for bug#42009: SELECT into variable gives different results to direct SELECT
- test result.
mysql-test/t/user_var.test:
Fix for bug#42009: SELECT into variable gives different results to direct SELECT
- test case.
sql/item_func.cc:
Fix for bug#42009: SELECT into variable gives different results to direct SELECT
- Item_func_set_user_var::save_item_result() added to evaluate and store
an item's result into a user variable.
sql/item_func.h:
Fix for bug#42009: SELECT into variable gives different results to direct SELECT
- Item_func_set_user_var::save_item_result() added to evaluate and store
an item's result into a user variable.
sql/sql_class.cc:
Fix for bug#42009: SELECT into variable gives different results to direct SELECT
- use Item_func_set_user_var::save_item_result() to store results into user
variables.
date_format functions
String::realloc() did not check whether the existing string data fits in
the newly allocated buffer for cases when reallocating a String object
with external buffer (i.e.alloced == FALSE). This could lead to memory
overruns in some cases.
client/sql_string.cc:
Fixed String::realloc() to check whether the existing string data fits
in the newly allocated buffer for cases when reallocating a String
object with external buffer.
mysql-test/r/func_str.result:
Added a test case for bug #41868.
mysql-test/t/func_str.test:
Added a test case for bug #41868.
sql/sql_class.cc:
After each call to Item::send() in select_send::send_data() reset
buffer to its original state to reduce unnecessary malloc() calls. See
comments for bug #41868 for detailed analysis.
sql/sql_string.cc:
Fixed String::realloc() to check whether the existing string data fits
in the newly allocated buffer for cases when reallocating a String
object with external buffer.
The problem is that a unfiltered user query was being passed as
the format string parameter of sql_print_warning which later
performs printf-like formatting, leading to crashes if the user
query contains formatting instructions (ie: %s). Also, it was
using THD::query as the source of the user query, but this
variable is not meaningful in some situations -- in a delayed
insert, it points to the table name.
The solution is to pass the user query as a parameter for the
format string and use the function parameter query_arg as the
source of the user query.
mysql-test/suite/binlog/r/binlog_unsafe.result:
Add test case result for Bug#42634
mysql-test/suite/binlog/t/binlog_unsafe.test:
Add test case for Bug#42634
sql/sql_class.cc:
Don't pass the user query as a format string.
