From r5917 to r5940
Detailed revision comments:
r5917 | marko | 2009-09-16 04:56:23 -0500 (Wed, 16 Sep 2009) | 1 line
branches/zip: innobase_get_cset_width(): Cache the value of current_thd.
r5919 | vasil | 2009-09-16 13:37:13 -0500 (Wed, 16 Sep 2009) | 4 lines
branches/zip:
Whitespace cleanup in the ChangeLog.
r5920 | vasil | 2009-09-16 13:47:22 -0500 (Wed, 16 Sep 2009) | 4 lines
branches/zip:
Add ChangeLog entries for r5916.
r5922 | marko | 2009-09-17 01:32:08 -0500 (Thu, 17 Sep 2009) | 4 lines
branches/zip: innodb-zip.test: Make the test work with zlib 1.2.3.3.
Apparently, the definition of compressBound() has slightly changed.
This has been filed as Mantis Issue #345.
r5924 | vasil | 2009-09-17 23:59:30 -0500 (Thu, 17 Sep 2009) | 4 lines
branches/zip:
White space and formatting cleanup in the ChangeLog
r5934 | vasil | 2009-09-18 12:06:46 -0500 (Fri, 18 Sep 2009) | 4 lines
branches/zip:
Fix typo.
r5935 | calvin | 2009-09-18 16:08:02 -0500 (Fri, 18 Sep 2009) | 6 lines
branches/zip: fix bug#44338; minor non-functional changes
Bug#44338 innodb has message about non-existing option
innodb_max_files_open. Change the option to innodb_open_files.
The fix was committed into 6.0 branch.
r5938 | calvin | 2009-09-19 02:14:25 -0500 (Sat, 19 Sep 2009) | 41 lines
branches/zip: Merge revisions 2584:2956 from branches/6.0,
except c2932.
Bug#37232 and bug#31183 were fixed in the 6.0 branch only.
They should be fixed in the plugin too, specially MySQL 6.0
is discontinued at this point.
------------------------------------------------------------------------
r2604 | inaam | 2008-08-21 09:37:06 -0500 (Thu, 21 Aug 2008) | 8 lines
branches/6.0 bug#37232
Relax locking behaviour for REPLACE INTO t SELECT ... FROM t1.
Now SELECT on t1 is performed as a consistent read when the isolation
level is set to READ COMMITTED.
Reviewed by: Heikki
------------------------------------------------------------------------
r2605 | inaam | 2008-08-21 09:59:33 -0500 (Thu, 21 Aug 2008) | 7 lines
branches/6.0
Added a comment to clarify why distinct calls to read MySQL binary
log file name and log position do not entail any race condition.
Suggested by: Heikki
------------------------------------------------------------------------
r2956 | inaam | 2008-11-04 04:47:30 -0600 (Tue, 04 Nov 2008) | 11 lines
branches/6.0 bug#31183
If the system tablespace runs out of space because 'autoextend' is
not specified with innodb_data_file_path there was no error message
printed to the error log. The client would get 'table full' error.
This patch prints an appropriate error message to the error log.
rb://43
Approved by: Marko
------------------------------------------------------------------------
r5940 | vasil | 2009-09-21 00:26:04 -0500 (Mon, 21 Sep 2009) | 4 lines
branches/zip:
Add ChangeLog entries for c5938.
From revision r5703 to r5716
Detailed revision comments:
r5703 | marko | 2009-08-27 02:25:00 -0500 (Thu, 27 Aug 2009) | 41 lines
branches/zip: Replace the constant 3/8 ratio that controls the LRU_old
size with the settable global variable innodb_old_blocks_pct. The
minimum and maximum values are 5 and 95 per cent, respectively. The
default is 100*3/8, in line with the old behavior.
ut_time_ms(): New utility function, to return the current time in
milliseconds. TODO: Is there a more efficient timestamp function, such
as rdtsc divided by a power of two?
buf_LRU_old_threshold_ms: New variable, corresponding to
innodb_old_blocks_time. The value 0 is the default behaviour: no
timeout before making blocks 'new'.
bpage->accessed, bpage->LRU_position, buf_pool->ulint_clock: Remove.
bpage->access_time: New field, replacing bpage->accessed. Protected by
buf_pool_mutex instead of bpage->mutex. Updated when a page is created
or accessed the first time in the buffer pool.
buf_LRU_old_ratio, innobase_old_blocks_pct: New variables,
corresponding to innodb_old_blocks_pct
buf_LRU_old_ratio_update(), innobase_old_blocks_pct_update(): Update
functions for buf_LRU_old_ratio, innobase_old_blocks_pct.
buf_page_peek_if_too_old(): Compare ut_time_ms() to bpage->access_time
if buf_LRU_old_threshold_ms && bpage->old. Else observe
buf_LRU_old_ratio and bpage->freed_page_clock.
buf_pool_t: Add n_pages_made_young, n_pages_not_made_young,
n_pages_made_young_old, n_pages_not_made_young, for statistics.
buf_print(): Display buf_pool->n_pages_made_young,
buf_pool->n_pages_not_made_young. This function is only for crash
diagnostics.
buf_print_io(): Display buf_pool->LRU_old_len and quantities derived
from buf_pool->n_pages_made_young, buf_pool->n_pages_not_made_young.
This function is invoked by SHOW ENGINE INNODB STATUS.
rb://129 approved by Heikki Tuuri. This addresses Bug #45015.
r5704 | marko | 2009-08-27 03:31:17 -0500 (Thu, 27 Aug 2009) | 32 lines
branches/zip: Fix a critical bug in fast index creation that could
corrupt the created indexes.
row_merge(): Make "half" an in/out parameter. Determine the offset of
half the output file. Copy the last blocks record-by-record instead of
block-by-block, so that the records can be counted. Check that the
input and output have matching n_rec.
row_merge_sort(): Do not assume that two blocks of size N are merged
into a block of size 2*N. The output block can be shorter than the
input if the last page of each input block is almost empty. Use an
accurate termination condition, based on the "half" computed by
row_merge().
row_merge_read(), row_merge_write(), row_merge_blocks(): Add debug output.
merge_file_t, row_merge_file_create(): Add n_rec, the number of records
in the merge file.
row_merge_read_clustered_index(): Update n_rec.
row_merge_blocks(): Update and check n_rec.
row_merge_blocks_copy(): New function, for copying the last blocks in
row_merge(). Update and check n_rec.
This bug was discovered with a user-supplied test case that creates an
index where the initial temporary file is 249 one-megabyte blocks and
the merged files become smaller. In the test, possible merge record
sizes are 10, 18, and 26 bytes.
rb://150 approved by Sunny Bains. This addresses Issue #320.
r5705 | marko | 2009-08-27 06:56:24 -0500 (Thu, 27 Aug 2009) | 11 lines
branches/zip: dict_index_find_cols(): On column name lookup failure,
return DB_CORRUPTION (HA_ERR_CRASHED) instead of abnormally
terminating the server. Also, disable the previously added diagnostic
output to the error log, because mysql-test-run does not like extra
output in the error log. (Bug #44571)
dict_index_add_to_cache(): Handle errors from dict_index_find_cols().
mysql-test/innodb_bug44571.test: A test case for triggering the bug.
rb://135 approved by Sunny Bains.
r5706 | inaam | 2009-08-27 11:00:27 -0500 (Thu, 27 Aug 2009) | 20 lines
branches/zip rb://147
Done away with following two status variables:
innodb_buffer_pool_read_ahead_rnd
innodb_buffer_pool_read_ahead_seq
Introduced two new status variables:
innodb_buffer_pool_read_ahead = number of pages read as part of
readahead since server startup
innodb_buffer_pool_read_ahead_evicted = number of pages that are read
in as readahead but were evicted before ever being accessed since
server startup i.e.: a measure of how badly our readahead is
performing
SHOW INNODB STATUS will show two extra numbers in buffer pool section:
pages read ahead/sec and pages evicted without access/sec
Approved by: Marko
r5707 | inaam | 2009-08-27 11:20:35 -0500 (Thu, 27 Aug 2009) | 6 lines
branches/zip
Remove unused macros as we erased the random readahead code in r5703.
Also fixed some comments.
r5708 | inaam | 2009-08-27 17:43:32 -0500 (Thu, 27 Aug 2009) | 4 lines
branches/zip
Remove redundant TRUE : FALSE from the return statement
r5709 | inaam | 2009-08-28 01:22:46 -0500 (Fri, 28 Aug 2009) | 5 lines
branches/zip rb://152
Disable display of deprecated parameter innodb_file_io_threads in
'show variables'.
r5714 | marko | 2009-08-31 01:10:10 -0500 (Mon, 31 Aug 2009) | 5 lines
branches/zip: buf_chunk_not_freed(): Do not acquire block->mutex unless
block->page.state == BUF_BLOCK_FILE_PAGE. Check that block->page.state
makes sense.
Approved by Sunny Bains over the IM.
r5716 | vasil | 2009-08-31 02:47:49 -0500 (Mon, 31 Aug 2009) | 9 lines
branches/zip:
Fix Bug#46718 InnoDB plugin incompatible with gcc 4.1 (at least: on PPC): "Undefined symbol"
by implementing our own check in plug.in instead of using the result from
the check from MySQL because it is insufficient.
Approved by: Marko (rb://154)
From revision r5537 to r5636
r5527 is already applied before
Detailed revision comments:
For HotBackup builds we don't want to hide the symbols.
r5537 | vasil | 2009-07-21 04:31:26 -0500 (Tue, 21 Jul 2009) | 5 lines
branches/zip:
Fixups in ChangeLog: sort filenames alphabetically and wrap to 78 chars per
line.
r5539 | vasil | 2009-07-21 05:28:27 -0500 (Tue, 21 Jul 2009) | 4 lines
branches/zip:
Add a test program to check whether the PAUSE instruction is available.
r5625 | vasil | 2009-08-04 00:52:48 -0500 (Tue, 04 Aug 2009) | 32 lines
branches/zip: Merge 5518:5622 from branches/5.1, resolving conflict in r5622
(after resolving the conflict Makefile.am was not changed so I have made
a dummy change so I can commit and thus record that branches/5.1 has been
merged in branches/zip up to 5622):
------------------------------------------------------------------------
r5622 | vasil | 2009-08-03 15:27:00 +0300 (Mon, 03 Aug 2009) | 20 lines
Changed paths:
M /branches/5.1/Makefile.am
branches/5.1:
Merge a change from MySQL:
------------------------------------------------------------
revno: 2988
committer: Satya B <satya.bn@sun.com>
branch nick: mysql-5.1-bugteam
timestamp: Wed 2009-07-01 11:06:05 +0530
message:
Fix build failure after applying Innodb snapshot 5.1-ss5282
After applying Innodb snapshot 5.1-ss5282, build was broken
because of missing header file.
Adding the header file to Makefile.am after informing the
innodb developers.
modified:
storage/innobase/Makefile.am
------------------------------------------------------------------------
r5626 | vasil | 2009-08-04 00:53:31 -0500 (Tue, 04 Aug 2009) | 4 lines
branches/zip:
Revert the dummy change from c5625.
r5629 | marko | 2009-08-04 06:42:44 -0500 (Tue, 04 Aug 2009) | 1 line
branches/zip: mysql-test: Pass MTR's internal checks.
r5635 | marko | 2009-08-05 06:06:55 -0500 (Wed, 05 Aug 2009) | 2 lines
branches/zip: Replace <number> with NUMBER in some comments,
to avoid problems with Doxygen XML output.
r5636 | marko | 2009-08-05 07:27:30 -0500 (Wed, 05 Aug 2009) | 2 lines
branches/zip: lock_rec_validate_page(): Add the parameter zip_size.
This should help track down Mantis Issue #289.
Let
- T be a transactional table and N non-transactional table.
- B be begin, C commit and R rollback.
- N be a statement that accesses and changes only N-tables.
- T be a statement that accesses and changes only T-tables.
In RBR, changes to N-tables that happen early in a transaction are not immediately flushed
upon committing a statement. This behavior may, however, break consistency in the presence
of concurrency since changes done to N-tables become immediately visible to other
connections. To fix this problem, we do the following:
. B N N T C would log - B N C B N C B T C.
. B N N T R would log - B N C B N C B T R.
Note that we are not preserving history from the master as we are introducing a commit that
never happened. However, this seems to be more acceptable than the possibility of breaking
consistency in the presence of concurrency.
Let
- T be a transactional table and N non-transactional table.
- B be begin, C commit and R rollback.
- M be a mixed statement, i.e. a statement that updates both T and N.
- M* be a mixed statement that fails while updating either T or N.
This patch restore the behavior presented in 5.1.37 for rows either produced in
the RBR or MIXED modes, when a M* statement that happened early in a transaction
had their changes written to the binary log outside the boundaries of the
transaction and wrapped in a BEGIN/ROLLBACK. This was done to keep the slave
consistent with with the master as the rollback would keep the changes on N and
undo them on T. In particular, we do what follows:
. B M* T C would log - B M* R B T C.
Note that, we are not preserving history from the master as we are introducing a
rollback that never happened. However, this seems to be more acceptable than
making the slave diverge. We do not fix the following case:
. B T M* C would log B T M* C.
The slave will diverge as the changes on T tables that originated from the M
statement are rolled back on the master but not on the slave. Unfortunately, we
cannot simply rollback the transaction as this would undo any uncommitted
changes on T tables.
SBR is not considered in this patch because a failing statement is written to
the binary along with the error code and a slave executes and then rolls back
the statement when it has an associated error code, thus undoing the effects
on T. In RBR and MBR, a full-fledged fix will be pushed after the WL 2687.
1. BUG#46000 - using index called GEN_CLUST_INDEX crashes server
Detailed revision comments:
r5895 | jyang | 2009-09-15 03:39:21 +0300 (Tue, 15 Sep 2009) | 5 lines
branches/5.1: Disallow creating index with the name of
"GEN_CLUST_INDEX" which is reserved for the default system
primary index. (Bug #46000) rb://149 approved by Marko Makela.
SELECT ... WHERE ... IN (NULL, ...) does full table scan,
even if the same query without the NULL uses efficient range scan.
The bugfix for the bug 18360 introduced an optimization:
if
1) all right-hand arguments of the IN function are constants
2) result types of all right argument items are compatible
enough to use the same single comparison function to
compare all of them to the left argument,
then
we can convert the right-hand list of constant items to an array
of equally-typed constant values for the further
QUICK index access etc. (see Item_func_in::fix_length_and_dec()).
The Item_null constant item objects have STRING_RESULT
result types, so, as far as Item_func_in::fix_length_and_dec()
is aware of NULLs in the right list, this improvement efficiently
optimizes IN function calls with a mixed right list of NULLs and
string constants. However, the optimization doesn't affect mixed
lists of NULLs and integers, floats etc., because there is no
unique common comparator.
New optimization has been added to ignore the result type
of NULL constants in the static analysis of mixed right-hand lists.
This is safe, because at the execution phase we care about
presence of NULLs anyway.
1. The collect_cmp_types() function has been modified to optionally
ignore NULL constants in the item list.
2. NULL-skipping code of the Item_func_in::fix_length_and_dec()
function has been modified to work not only with in_string
vectors but with in_vectors of other types.
The problem is that there is only one autoinc value associated with
the query when binlogging. If more than one autoinc values are used
in the query, the autoinc values after the first one can be inserted
wrongly on slave. So these autoinc values can become inconsistent on
master and slave.
The problem is resolved by marking all the statements that invoke
a trigger or call a function that updated autoinc fields as unsafe,
and will switch to row-format in Mixed mode. Actually, the statement
is safe if just one autoinc value is used in sub-statement, but it's
impossible to check how many autoinc values are used in sub-statement.)
On Mac OS X or Windows, sending a SIGHUP to the server or a
asynchronous flush (triggered by flush_time), would cause the
server to crash.
The problem was that a hook used to detach client API handles
wasn't prepared to handle cases where the thread does not have
a associated session.
The solution is to verify whether the thread has a associated
session before trying to detach a handle.
The 'BEGIN/COMMIT/ROLLBACK' log event could be filtered out if the
database is not selected by --database option of mysqlbinlog command.
This can result in problem if there are some statements in the
transaction are not filtered out.
To fix the problem, mysqlbinlog will output 'BEGIN/ROLLBACK/COMMIT'
in regardless of the database filtering rules.
The 'BEGIN/COMMIT/ROLLBACK' log event could be filtered out if the
database is not selected by --database option of mysqlbinlog command.
This can result in problem if there are some statements in the
transaction are not filtered out.
To fix the problem, mysqlbinlog will output 'BEGIN/ROLLBACK/COMMIT'
in regardless of the database filtering rules.
Backport from 6.0 to 5.1.
Only those sync points are included, which are used in debug_sync.test.
The Debug Sync Facility allows to place synchronization points
in the code:
open_tables(...)
DEBUG_SYNC(thd, "after_open_tables");
lock_tables(...)
When activated, a sync point can
- Send a signal and/or
- Wait for a signal
Nomenclature:
- signal: A value of a global variable that persists
until overwritten by a new signal. The global
variable can also be seen as a "signal post"
or "flag mast". Then the signal is what is
attached to the "signal post" or "flag mast".
- send a signal: Assign the value (the signal) to the global
variable ("set a flag") and broadcast a
global condition to wake those waiting for
a signal.
- wait for a signal: Loop over waiting for the global condition until
the global value matches the wait-for signal.
Please find more information in the top comment in debug_sync.cc
or in the worklog entry.
The problem was that appending values to the end of an existing
ENUM or SET column was being treated as table data modification,
preventing a immediately (fast) table alteration that occurs when
only table metadata is being modified.
The cause was twofold: adding a enumeration or set members to the
end of the list of valid member values was not being considered
a "compatible" table alteration, and for SET columns, the check
was being done upon the max display length and not the underlying
(pack) length of the field.
The solution is to augment the function that checks wether two ENUM
or SET fields are compatible -- by comparing the pack lengths and
performing a limited comparison of the member values.
The bug is not related to MERGE table or TRIGGER. More correct description
would be 'assertion on multi-table UPDATE + NATURAL JOIN + MERGEABLE VIEW'.
On PREPARE stage(see test case) we call mark_common_columns() func which
creates ON condition for NATURAL JOIN and sets appropriate
table read_set bitmaps for fields which are used in ON condition.
On EXECUTE stage mark_common_columns() is not called, we set
necessary read_set bitmaps in setup_conds(). But 'B.f1' field
is already processed and related item alredy fixed before
setup_conds() as updated field and setup_conds can not set
read_set bitmap because of that.
The fix is to set read_set bitmap for appropriate table field even
if Item_direct_view_ref item which represents a refernce to this field
is fixed.
"load data" statements were written to the binlog as a mix of the original statement
and bits recreated from parse-info. This relied on implementation details and broke
with IGNORE_SPACES and versioned comments.
We now completely resynthesize the query for LOAD DATA for binlog (which among other
things normalizes them somewhat with regard to case, spaces, etc.).
We have already parsed the query properly, so we make use of that rather
than mix-and-match string literals and parsed items.
This should make us safe with regard to versioned comments, even those
spanning multiple tokens. Also no longer affected by IGNORE_SPACES.
view definition
During SHOW CREATE VIEW there is no reason to 'anonymize'
errors that name objects that a user does not have access
to. Moreover it was inconsistently implemented. For example
base tables being referenced from a view appear to be ok,
but not views. The manual on the other hand is clear: If a
user has the privileges SELECT and SHOW VIEW, the view
definition is available to that user, period. The fix
changes the behavior to support the manual.
trigger, merge table
The problem with break statements is that they have very
local effects. Hence a break statement within the inner loop
of a nested-loops join caused execution to proceed to the
next table even though a serious error occurred. The problem
was fixed by breaking out the inner loop into its own
method. The change empowers all errors to terminate the
execution.
The errors that will now halt multi-DELETE execution
altogether are
- triggers returning errors
- handler errors
- server being killed
All statements executed by mysql_upgrade are binlogged and then are replicated to slave.
This will result in some errors. The report of this bug has demonstrated some examples.
Master and slave should be upgraded separately. All statements executed by
mysql_upgrade will not be binlogged.
--write-binlog and --skip-write-binlog options are added into mysql_upgrade.
These options control whether sql statements are binlogged or not.
In RBR, 'DROP TEMPORARY TABLE IF EXISTS...' statement is binlogged when the table
does not exist.
In fact, 'DROP TEMPORARY TABLE ...' statement should never be binlogged in RBR
no matter if the table exists or not.
This patch addresses this by checking whether we are dropping a
temporary table or not, when building the custom drop statement.
failure to cleanup of table
The test case was not dropping a table before exiting (ie, it was
not cleaning itself after execution). In this case, the warning
message stating that the test did not do a proper cleanup was
deterministic (which can be annoying).
I have found other tests cases on which mtr sporadically reports
that they have not cleaned up after execution:
- rpl_ndb_circular
- rpl_failed_optimize
In this case, the master was dropping a table but there was no
synchronization between the slave and the master.
This patch addresses the rpl_ndb_circular_simplex case by adding
the missing DROP table. The other cases are fixed by deploying
the missing sync_slave_with_master instruction.
HA_ERR_WRONG_INDEX
In RBR, disabling keys on slave table will break replication when
updating or deleting a record. When the slave thread tries to
find the row, by searching in the storage engine, it checks
whether the table has a key or not. If it has one, then the slave
thread uses it to search the record.
Nonetheless, the slave only checks whether the key exists or not,
it does not verify if it is active. Should the key be
disabled (eg, DBA has issued an ALTER TABLE ... DISABLE KEYS)
then it will result in error: HA_ERR_WRONG_INDEX.
This patch addresses this issue by making the slave thread also
check whether the key is active or not before actually using it.
Network error happened here, but it can be caused by CR_CONNECTION_ERROR,
CR_CONN_HOST_ERROR, CR_SERVER_GONE_ERROR, CR_SERVER_LOST, ER_CON_COUNT_ERROR,
and ER_SERVER_SHUTDOWN. We just check CR_SERVER_LOST here, so the test fails.
To fix the problem, check all errors that can be cause by the master shutdown.
Invalid (old?) table or database name in logs
Problem was still not completely fixed, due to
qouting.
This is the server side only fix (in explain_filename),
the change from filename_to_tablename to use explain_filename
in the InnoDB code must be done before the bug is
fixed.
