InnoDB: Remove HAVE_purify, UNIV_INIT_MEM_TO_ZERO, UNIV_SET_MEM_TO_ZERO.
The compile-time setting HAVE_purify can mask potential bugs.
It is being set in PB2 Valgrind runs. We should simply get rid of it,
and replace it with UNIV_MEM_INVALID() to declare uninitialized memory
as such in Valgrind-instrumented binaries.
os_mem_alloc_large(), ut_malloc_low(): Remove the parameter set_to_zero.
ut_malloc(): Define as a macro that invokes ut_malloc_low().
buf_pool_init(): Never initialize the buffer pool frames. All pages
must be initialized before flushing them to disk.
mem_heap_alloc(): Never initialize the allocated memory block.
os_mem_alloc_nocache(), ut_test_malloc(): Unused function, remove.
rb:813 approved by Jimmy Yang
COMMUNICATION PACKETS, ERROR_CODE: 1160
If idle FEDERATED table is evicted from the table cache when
a connection to remote server is lost, query that initiated
eviction may fail.
If this query is executed by slave SQL thread it may fail as well.
An error of close was stored in diagnostics area, which was later
attributed to the statement that caused eviction.
With this patch FEDERATED clears an error of close.
CREATE TABLE bug13510739 (c INTEGER NOT NULL, PRIMARY KEY (c)) ENGINE=INNODB;
INSERT INTO bug13510739 VALUES (1), (2), (3), (4);
DELETE FROM bug13510739 WHERE c=2;
HANDLER bug13510739 OPEN;
HANDLER bug13510739 READ `primary` = (2);
HANDLER bug13510739 READ `primary` NEXT; <-- crash
The bug is that in the particular testcase row_search_for_mysql() picked up
a delete-marked record and quit, leaving the cursor non-positioned state and
on the subsequent 'get next' call the code crashed because of the
non-positioned cursor.
In row0sel.cc (line numbers from mysql-trunk):
4653 if (rec_get_deleted_flag(rec, comp)) {
...
4679 if (index == clust_index && unique_search) {
4680
4681 err = DB_RECORD_NOT_FOUND;
4682
4683 goto normal_return;
4684 }
it quit from here, not storing the cursor position.
In contrast, if the record=2 is not found at all (e.g. sleep(1) after DELETE
to let the purge wipe it away completely) then 'get = 2' does find record=3
and quits from here:
4366 if (0 != cmp_dtuple_rec(search_tuple, rec, offsets)) {
...
4394 btr_pcur_store_position(pcur, &mtr);
4395
4396 err = DB_RECORD_NOT_FOUND;
4397 #if 0
4398 ut_print_name(stderr, trx, FALSE, index->name);
4399 fputs(" record not found 3\n", stderr);
4400 #endif
4401
4402 goto normal_return;
Another fix could be to extend the condition on line 4366 to hold only if
seach_tuple matches rec AND if rec is not delete marked.
Notice that in the above test case if we wait about 1 second somewhere after
DELETE and before 'get = 2', then the testcase does not crash and returns 4
instead. Not sure if this is the correct behavior, but this bugfix removes
the crash and makes the code return what it also returns in the non-crashing
case (if rec=2 is not found during 'get = 2', e.g. we have sleep(1) there).
Approved by: Marko (http://bur03.no.oracle.com/rb/r/863/)
The counter handler_read_key (SSV::ha_read_key_count) is incremented
incorrectly.
The mysql server maintains a per thread system_status_var (SSV)
object. This object contains among other things the counter
SSV::ha_read_key_count. The purpose of this counter is to measure the
number of requests to read a row based on a key (or the number of
index lookups).
This counter was wrongly incremented in the
ha_innobase::innobase_get_index(). The fix removes
this increment statement (for both innodb and innodb_plugin).
The various callers of the innobase_get_index() was checked to
determine if anybody must increment this counter (if they first call
innobase_get_index() and then perform an index lookup). It was found
that no caller of innobase_get_index() needs to worry about the
SSV::ha_read_key_count counter.
This bug ensures that a live downgrade from an InnoDB 5.6 with WL5756 and
a database created with innodb-page-size=8k or 4k will make a version 5.5
installation politely refuse to start. Instead of crashing or giving some
indication about a corrupted database, it will indicate the page size
difference.
This patch takes only that part of the Wl5756 patch that is needed to
protect against opening a tablespace that is stamped with a different
page size.
It also contains the change in dict_index_find_on_id_low() just in case
a database with another page size is created by recompiling a pre-WL5756
InnoDB.
WITH LARGE BUFFER POOL
(Note: this a backport of revno:3472 from mysql-trunk)
rb://845
approved by: Marko
When dropping a table (with an .ibd file i.e.: with
innodb_file_per_table set) we scan entire LRU to invalidate pages from
that table. This can be painful in case of large buffer pools as we hold
the buf_pool->mutex for the scan. Note that gravity of the problem does
not depend on the size of the table. Even with an empty table but a
large and filled up buffer pool we'll end up scanning a very long LRU
list.
The fix is to scan flush_list and just remove the blocks belonging to
the table from the flush_list, marking them as non-dirty. The blocks
are left in the LRU list for eventual eviction due to aging. The
flush_list is typically much smaller than the LRU list but for cases
where it is very long we have the solution of releasing the
buf_pool->mutex after scanning 1K pages.
buf_page_[set|unset]_sticky(): Use new IO-state BUF_IO_PIN to ensure
that a block stays in the flush_list and LRU list when we release
buf_pool->mutex. Previously we have been abusing BUF_IO_READ to achieve
this.
WITH MYISAM_USE_MMAP ENABLED
MySQL server can crash due to segmentation fault when
started with myisam_use_mmap.
The reason behind this being, while making a request to
unmap (munmap) the previously mapped memory (mmap), the
size passed was 7 bytes larger than the size requested at
the time of mapping. This can eventually unmap the adjacent
memory mapped block, belonging to some other memory-map pool.
Hence the subsequent call to mmap can map a region which was
still a valid memory mapped area.
Fixed by removing the extra 7-byte margin which was erroneously
added to the size, used for unmappping.
storage/myisam/mi_close.c:
Bug#11756764 48726: MYSQLD KEEPS CRASHING WITH SIGSEGV
WITH MYISAM_USE_MMAP ENABLED
Added a condition to call _mi_unmap_file() in case
of compressed records. mi_munmap_file() is called
otherwise.
storage/myisam/mi_packrec.c:
Bug#11756764 48726: MYSQLD KEEPS CRASHING WITH SIGSEGV
WITH MYISAM_USE_MMAP ENABLED
mi_dynmap_file() function, after successfully executing
mmap, stores the total size in info->s->mapped_length
variable. Now, if mi_dynmap_file() is invoked with a size
with an extra 7-byte margin (MEMMAP_EXTRA_MARGIN),
the margin will eventually also get stored in mapped_length.
So, un-mapping function can simply use the value stored in
mapped_length in order to unmap the previously mapped
region.
AND HANG IN SHOW TABLE STATUS.
ISSUE: Table corruption due to concurrent queries.
Different threads running insert and check
query leads to table corruption. Not properly locked,
rows are inserted in between check query.
SOLUTION: In check query mutex lock is acquired
for a longer time to handle concurrent
insert and check query.
NOTE: Additionally we backported the fix for CHECKSUM
issue(bug#11758979).
Remove btr_cur_t::ibuf_cnt. The only dependence on cursor->ibuf_cnt
was ibuf_set_entry_counter(). That code path was removed in the
original bug fix (marko.makela@oracle.com-20111107072802-dgwagejlpub0rjkd).
rb:819 approved by Jimmy Yang
rb://816
approved by: Marko Makela
The title is misleading. This bug was actually introduced by
bug 12635227 and was unearthed by a later optimization.
We need to free buf_page_t structs that we are allocating using
malloc() at shutdown.
I manually checked that all the conflicting InnoDB changes are in 5.5 already.
Two things I am not sure about - I commented them with XXX in this patch.
I will further check with the authors of the changesets whether these things
should be present or not.
a.k.a. Bug#7975 deadlock without any locking, simple select and update
Bug#7975 was reintroduced when the storage engine API was made
pluggable in MySQL 5.1. Instead of looking at thd->lex directly, we
rely on handler::extra(). But, we were looking at the wrong extra()
flag, and we were ignoring the TRX_DUP_REPLACE flag in places where we
should obey it.
innodb_replace.test: Add tests for hopefully all affected statement
types, so that bug should never ever resurface. This kind of tests
should have been added when fixing Bug#7975 in MySQL 5.0.3 in the
first place.
rb:806 approved by Sunny Bains
btr_pcur_restore_position_func(): When the cursor was positioned at
the tree infimum or supremum, initialize pos_state and latch_mode. The
assertion failed, because pos_state was BTR_PCUR_WAS_POSITIONED. In
the test failure of WL#5874, the purge thread attempted to restore the
cursor position on the infimum record (the clustered index was empty).
btr_pcur_detach(), btr_pcur_is_detached(): Unused functions, remove.
rb:804 approved by Inaam Rana
ibuf_insert_low(), the only caller of ibuf_set_entry_counter(), will
have latched an insert buffer bitmap page in bitmap_mtr before
invoking ibuf_set_entry_counter(). The latching order forbids any
further pages to be latched.
ibuf_set_entry_counter(): Renamed to ibuf_get_entry_counter(),
simplified the code and added comments.
Added the following symbols for predefined field numbers in change
buffer records:
#define IBUF_REC_FIELD_SPACE 0 /*!< in the pre-4.1 format,
the page number. later, the space_id */
#define IBUF_REC_FIELD_MARKER 1 /*!< starting with 4.1, a marker
consisting of 1 byte that is 0 */
#define IBUF_REC_FIELD_PAGE 2 /*!< starting with 4.1, the
page number */
#define IBUF_REC_FIELD_METADATA 3 /* the metadata field */
#define IBUF_REC_FIELD_USER 4 /* first user field */
rb:802 approved by Sunny Bains
