BUG#54872 MBR: replication failure caused by using tmp table inside transaction
Changed criteria to classify a statement as unsafe in order to reduce the
number of spurious warnings. So a statement is classified as unsafe when
there is on-going transaction at any point of the execution if:
1. The mixed statement is about to update a transactional table and
a non-transactional table.
2. The mixed statement is about to update a temporary transactional
table and a non-transactional table.
3. The mixed statement is about to update a transactional table and
read from a non-transactional table.
4. The mixed statement is about to update a temporary transactional
table and read from a non-transactional table.
5. The mixed statement is about to update a non-transactional table
and read from a transactional table when the isolation level is
lower than repeatable read.
After updating a transactional table if:
6. The mixed statement is about to update a non-transactional table
and read from a temporary transactional table.
7. The mixed statement is about to update a non-transactional table
and read from a temporary transactional table.
8. The mixed statement is about to update a non-transactionala table
and read from a temporary non-transactional table.
9. The mixed statement is about to update a temporary non-transactional
table and update a non-transactional table.
10. The mixed statement is about to update a temporary non-transactional
table and read from a non-transactional table.
11. A statement is about to update a non-transactional table and the
option variables.binlog_direct_non_trans_update is OFF.
The reason for this is that locks acquired may not protected a concurrent
transaction of interfering in the current execution and by consequence in
the result. So the patch reduced the number of spurious unsafe warnings.
Besides we fixed a regression caused by BUG#51894, which makes temporary
tables to go into the trx-cache if there is an on-going transaction. In
MIXED mode, the patch for BUG#51894 ignores that the trx-cache may have
updates to temporary non-transactional tables that must be written to the
binary log while rolling back the transaction.
So we fix this problem by writing the content of the trx-cache to the
binary log while rolling back a transaction if a non-transactional
temporary table was updated and the binary logging format is MIXED.
concurrently execute the statement XA START 'x', then mysqld
server could crash.
sql/sql_class.cc:
xid_cache_insert: added checking for element in cache before
insert it, return TRUE if such element already exists.
sql/sql_parse.cc:
mysql_execute_command modified:
* sequence of calls to xid_cache_search(..)/xid_cache_insert(...)
replaced by call to xid_cache_insert(...) in alternative
'case SQLCOM_XA_START:'
* added comment to alternative 'case SQLCOM_XA_COMMIT:'.
DROP USER
RENAME USER CURRENT_USER() ...
GRANT ... TO CURRENT_USER()
REVOKE ... FROM CURRENT_USER()
ALTER DEFINER = CURRENT_USER() EVENTbut, When these statements are binlogged, CURRENT_USER() just is binlogged
as 'CURRENT_USER()', it is not expanded to the real user name. When slave
executes the log event, 'CURRENT_USER()' is expand to the user of slave
SQL thread, but SQL thread's user name always NULL. This breaks the replication.
After this patch, session's user will be written into query log events
if these statements call CURREN_USER() or 'ALTER EVENT' does not assign a definer.
mysql-test/include/diff_tables.inc:
Expend its abilities.
Now it can diff not only in sessions of 'master' and 'slave', but
other sessions as well.
mysql-test/include/rpl_diff_tables.inc:
Diff the same table between master and slaves.
sql/log_event.cc:
session's user will be written into Query_log_event, if is_current_user_used() is TRUE.
On slave SQL thread, Only thd->variables.current_user is written into Query_log_event,
if it exists.
sql/sql_acl.cc:
On slave SQL thread, grantor should copy from thd->variables.current_user, if it exists
sql/sql_class.h:
On slave SQL thread, thd->variables.current_user is used to store the applying event's
invoker.
an atomic counter"
Split the large LOCK_open section in open_table().
Do not call open_table_from_share() under LOCK_open.
Remove thd->version.
This fixes
Bug#50589 "Server hang on a query evaluated using a temporary
table"
Bug#51557 "LOCK_open and kernel_mutex are not happy together"
Bug#49463 "LOCK_table and innodb are not nice when handler
instances are created".
This patch has effect on storage engines that rely on
ha_open() PSEA method being called under LOCK_open.
In particular:
1) NDB is broken and left unfixed. NDB relies on LOCK_open
being kept as part of ha_open(), since it uses auto-discovery.
While previously the NDB open code was race-prone, now
it simply fails on asserts.
2) HEAP engine had a race in ha_heap::open() when
a share for the same table could be added twice
to the list of shares, or a dangling reference to a share
stored in HEAP handler. This patch aims to address this
problem by 'pinning' the newly created share in the
internal HEAP engine share list until at least one
handler instance is created using that share.
include/heap.h:
Add members to HP_CREATE_INFO.
Declare heap_release_share().
sql/lock.cc:
Remove thd->version, use thd->open_tables->s->version instead.
sql/repl_failsafe.cc:
Remove thd->version.
sql/sql_base.cc:
- close_thread_table(): move handler cleanup code outside the critical section protected by LOCK_open.
- remove thd->version
- split the large critical section in open_table() that
opens a new table from share and is protected by LOCK_open
into 2 critical sections, thus reducing the critical path.
- make check_if_table_exists() acquire LOCK_open internally.
- use thd->open_tables->s->version instead of thd->refresh_version to make sure that all tables in
thd->open_tables are in the same refresh series.
sql/sql_base.h:
Add declaration for check_if_table_exists().
sql/sql_class.cc:
Remove init_open_tables_state(), it's now equal to
reset_open_tables_state().
sql/sql_class.h:
Remove thd->version, THD::init_open_tables_state().
sql/sql_plugin.cc:
Use table->m_needs_reopen to mark the table as stale
rather than manipulate with thd->version, which is no more.
sql/sql_udf.cc:
Use table->m_needs_reopen to mark the table as stale
rather than manipulate with thd->version, which is no more.
sql/table.h:
Remove an unused variable.
sql/tztime.cc:
Use table->m_needs_reopen to mark the table as stale
rather than manipulate with thd->version, which is no more.
storage/heap/CMakeLists.txt:
Add heap tests to cmake build files.
storage/heap/ha_heap.cc:
Fix a race when ha_heap::ha_open() could insert two
HP_SHARE objects into the internal share list or store
a dangling reference to a share in ha_heap instance,
or wrongly set implicit_emptied.
storage/heap/hp_create.c:
Optionally pin a newly created share in the list of shares
by increasing its open_count. This is necessary to
make sure that a newly created share doesn't disappear while
a HP_INFO object is being created to reference it.
storage/heap/hp_open.c:
When adding a new HP_INFO object to the list of objects
in the heap share, make sure the open_count is not increased
twice.
storage/heap/hp_test1.c:
Adjust the test to new function signatures.
storage/heap/hp_test2.c:
Adjust the test to new function signatures.
Bug#46527 COMMIT AND CHAIN RELEASE does not make sense
Bug#53343 completion_type=1, COMMIT/ROLLBACK AND CHAIN don't
preserve the isolation level
Bug#53346 completion_type has strange effect in a stored
procedure/prepared statement
Added test cases to verify the expected behaviour of :
SET SESSION TRANSACTION ISOLATION LEVEL,
SET TRANSACTION ISOLATION LEVEL,
@@completion_type,
COMMIT AND CHAIN,
ROLLBACK AND CHAIN
..and some combinations of the above
In order to allow thread schedulers to be dynamically loaded,
it is necessary to make the following changes to the server:
- Two new service interfaces
- Modifications to InnoDB to inform the thread scheduler of state changes.
- Changes to the VIO subsystem for checking if data is available on a socket.
- Elimination of remains of the old thread pool implementation.
The two new service interfaces introduces are:
my_thread_scheduler
A service interface to register a thread
scheduler.
thd_wait
A service interface to inform thread scheduler
that the thread is about to start waiting.
In addition, the patch adds code that:
- Add a call to thd_wait for table locks in mysys
thd_lock.c by introducing a set function that
can be used to set a callback to be used when
waiting on a lock and resuming from waiting.
- Calling the mysys set function from the server
to set the callbacks correctly.
Fix various mismatches between function's language linkage. Any
particular function that is declared in C++ but should be callable
from C must have C linkage. Note that function types with different
linkages are also distinct. Thus, if a function type is declared in
C code, it will have C linkage (same if declared in a extern "C"
block).
client/mysql.cc:
Mismatch between prototype and declaration.
client/mysqltest.cc:
mysqltest used to be C code. Use C linkage where appropriate.
cmd-line-utils/readline/input.c:
Isolate unreachable code.
include/my_alloc.h:
Function type must have C linkage.
include/my_base.h:
Function type must have C linkage.
include/my_global.h:
Add helper macros to avoid spurious namespace indentation.
include/mysql.h.pp:
Update ABI file.
mysys/my_gethwaddr.c:
Remove stray carriage return and fix coding style.
plugin/semisync/semisync_master_plugin.cc:
Callback function types have C linkage.
plugin/semisync/semisync_slave_plugin.cc:
Callback function types have C linkage.
sql/derror.cc:
Expected function type has C linkage.
sql/field.cc:
Use helper macro and fix indentation.
sql/handler.cc:
Expected function type has C linkage.
sql/item_sum.cc:
Correct function linkages. Remove now unnecessary cast.
sql/item_sum.h:
Add prototypes with the appropriate linkage as otherwise they
are distinct.
sql/mysqld.cc:
Wrap functions in C linkage mode.
sql/opt_range.cc:
C language linkage is ignored for class member functions.
sql/partition_info.cc:
Add wrapper functions with C linkage for class member functions.
sql/rpl_utility.h:
Use helper macro and fix indentation.
sql/sql_class.cc:
Change type of thd argument -- THD is a class.
Use helper macro and fix indentation.
sql/sql_class.h:
Change type of thd argument -- THD is a class.
sql/sql_select.cc:
Expected function type has C linkage.
sql/sql_select.h:
Move prototype to sql_test.h
sql/sql_show.cc:
Expected function type has C linkage.
sql/sql_test.cc:
Fix required function prototype and fix coding style.
sql/sql_test.h:
Removed unnecessary export and add another.
storage/myisammrg/ha_myisammrg.cc:
Expected function type has C linkage.
storage/perfschema/pfs.cc:
PSI headers are declared with C language linkage, which also
applies to function types.
errors
In the fix of BUG#39934 in 5.1-rep+3, errors are generated when
binlog_format=row and a statement modifies a table restricted to
statement-logging (ER_BINLOG_ROW_MODE_AND_STMT_ENGINE); or if
binlog_format=statement and a statement modifies a table restricted to
row-logging (ER_BINLOG_STMT_MODE_AND_ROW_ENGINE).
However, some DDL statements that lock tables (e.g. ALTER TABLE,
CREATE INDEX and CREATE TRIGGER) were causing spurious errors,
although no row might be inserted into the binary log.
To fix the problem, we tagged statements that may generate
rows into the binary log and thence the warning messages are
only printed out when the appropriate conditions hold and rows
might be changed.
sql/log_event.cc:
Reorganized the Query_log_event's constructor based on the
CF_CAN_GENERATE_ROW_EVENTS flag and as such any statement
that has the associated flag should go through a cache
before being written to the binary log.
sql/share/errmsg-utf8.txt:
Improved the error message ER_BINLOG_UNSAFE_MIXED_STATEMENT according to Paul's
suggestion.
sql/sql_class.cc:
Created a hook to be used by innodb that checks if a statement
may write rows to the binary log. In other words, if it has
the CF_CAN_GENERATE_ROW_EVENTS flag associated.
sql/sql_class.h:
Defined the CF_CAN_GENERATE_ROW_EVENTS flag.
sql/sql_parse.cc:
Updated the sql_command_flags and added a function to check the
CF_CAN_GENERATE_ROW_EVENTS.
sql/sql_parse.h:
Added a function to check the CF_CAN_GENERATE_ROW_EVENTS.
storage/innobase/handler/ha_innodb.cc:
Added a call to the hook thd_generates_rows().
storage/innobase/handler/ha_innodb.h:
Defined an external reference to the hook thd_generates_rows().
The thd->variables.option_bits & OPTION_BIN_LOG is currently abused:
it's both a system variable and an implementation switch. The current
approach to this option bit breaks the session variable encapsulation.
Besides it is allowed to change @@session.sql_bin_log within a
transaction what may lead to not correctly logging a transaction.
To fix the problems, we created a thd->variables variable to represent
the "sql_log_bin" and prohibited its update inside a transaction or
sub-statement.
mysql-test/suite/binlog/r/binlog_stm_unsafe_warning.result:
Updated result file. The reason the warnings are removed is
related to BUG#50312.
mysql-test/suite/binlog/r/binlog_switch_inside_trans.result:
Checks when is possible to change the option @@session.sql_log_bin.
mysql-test/suite/binlog/t/binlog_switch_inside_trans.test:
Checks when is possible to change the option @@session.sql_log_bin.
mysql-test/suite/rpl/r/rpl_non_direct_stm_mixing_engines.result:
Updated the result file with warnings that were being printed
due to the wrong use of the thd->variables.option_bits and
sql_log_bin_top_level variables.
mysql-test/suite/rpl/r/rpl_stm_mixing_engines.result:
Updated the result file with warnings that were being printed
due to the wrong use of the thd->variables.option_bits and
sql_log_bin_top_level variables.
sql/share/errmsg-utf8.txt:
Introduces two error messages to notify that the @@session.sql_log_bin
cannot be changed inside a sub-statement or transaction.
sql/sql_base.cc:
Removes the variable sql_log_bin_toplevel and uses
the session variable sql_log_bin.
sql/sql_class.cc:
Replaces the variable sql_log_bin_toplevel by the
(variables.option_bits & OPTION_BIN_LOG).
sql/sql_class.h:
Removes the variable sql_log_bin_toplevel and creates
a session variable sql_log_bin.
sql/sys_vars.cc:
Checks when the sql_log_bin can be correctly updated.
for ALTER TABLE, LOAD DATA).
ROW_COUNT is now assigned according to the following rules:
- In my_ok():
- for DML statements: to the number of affected rows;
- for DDL statements: to 0.
- In my_eof(): to -1 to indicate that there was a result set.
We derive this semantics from the JDBC specification, where int
java.sql.Statement.getUpdateCount() is defined to (sic) "return the
current result as an update count; if the result is a ResultSet
object or there are no more results, -1 is returned".
- In my_error(): to -1 to be compatible with the MySQL C API and
MySQL ODBC driver.
- For SIGNAL statements: to 0 per WL#2110 specification. Zero is used
since that's the "default" value of ROW_COUNT in the diagnostics area.
sql/protocol.cc:
Fix a typo.
sql/sql_class.h:
- Introduce THD::get_row_count_func() / THD::set_row_count_func();
- Remove the CF_HAS_ROW_COUNT define
sql/sql_parse.cc:
CF_HAS_ROW_COUNT was eliminated.
Conflicts:
Text conflict in mysql-test/r/grant.result
Text conflict in mysql-test/t/grant.test
Text conflict in mysys/mf_loadpath.c
Text conflict in sql/slave.cc
Text conflict in sql/sql_priv.h
MYSQL_BIN_LOG m_table_map_version member and it's associated
functions were not used in the logic of binlogging and replication,
this patch removed all related code.
sql/log.cc:
removed unused m_table_map_version variable and functions
sql/log.h:
removed unused m_table_map_version variable and functions
sql/log_event.h:
Removed unused LOG_EVENT_UPDATE_TABLE_MAP_VERSION_F flag
sql/sql_class.cc:
Removed unused LOG_EVENT_UPDATE_TABLE_MAP_VERSION_F flag
sql/sql_load.cc:
Removed unused LOG_EVENT_UPDATE_TABLE_MAP_VERSION_F flag
sql/table.cc:
removed unused table_map_version variable
sql/table.h:
removed unused table_map_version variable
Bug#20837 Apparent change of isolation level during transaction,
Bug#46527 COMMIT AND CHAIN RELEASE does not make sense,
Bug#53343 completion_type=1, COMMIT/ROLLBACK AND CHAIN don't
preserve the isolation level
Bug#53346 completion_type has strange effect in a stored
procedure/prepared statement
Make thd->tx_isolation mean strictly "current transaction
isolation level"
Make thd->variables.tx_isolation mean "current session isolation
level".
The current transaction isolation level is now established
at transaction start. If there was a SET TRANSACTION
ISOLATION LEVEL statement, the value is taken from it.
Otherwise, the session value is used.
A change in a session value, made while a transaction is active,
whereas still allowed, no longer has any effect on the
current transaction isolation level. This is an incompatible
change.
A change in a session isolation level, made while there is
no active transaction, overrides SET TRANSACTION statement,
if there was any.
Changed the impelmentation to not look at @@session.completion_type
in the parser, and thus fixed Bug#53346.
Changed the parser to not allow AND NO CHAIN RELEASE,
and thus fixed Bug#46527.
Changed the transaction API to take the current transaction
isolation level into account:
- BEGIN/COMMIT now do preserve the current transaction
isolation level if chaining is on.
- implicit commit, XA COMMIT or XA ROLLBACK or autocommit don't.
Conflicts:
Text conflict in mysql-test/r/explain.result
Text conflict in mysql-test/t/explain.test
Text conflict in sql/net_serv.cc
Text conflict in sql/sp_head.cc
Text conflict in sql/sql_priv.h
truncates text/blob to 766 chars
mysqldump and SELECT ... INTO OUTFILE truncated long BLOB/TEXT
values to size of 766 bytes (MAX_FIELD_WIDTH or 255 * 3 + 1).
The select_export::send_data method has been modified to
reallocate a conversion buffer for long field data.
mysql-test/r/mysqldump.result:
Test case for bug #53088.
mysql-test/r/outfile_loaddata.result:
Test case for bug #53088.
mysql-test/t/mysqldump.test:
Test case for bug #53088.
mysql-test/t/outfile_loaddata.test:
Test case for bug #53088.
sql/sql_class.cc:
Bug #53088: mysqldump with -T & --default-character-set set
truncates text/blob to 766 chars
The select_export::send_data method has been modified to
reallocate a conversion buffer for long field data.
Iterative patch improvement. Previously committed patch
caused wrong result on Windows. The previous patch also
broke secure_file_priv for symlinks since not all file
paths which must be compared against this variable are
normalized using the same norm.
The server variable opt_secure_file_priv wasn't
normalized properly and caused the operations
LOAD DATA INFILE .. INTO TABLE ..
and
SELECT load_file(..)
to do different interpretations of the
--secure-file-priv option.
The patch moves code to the server initialization
routines so that the path always is normalized
once and only once.
It was also intended that setting the option
to an empty string should be equal to
lifting all previously set restrictions. This
is also fixed by this patch.
mysql-test/r/loaddata.result:
* Removed test code which will currently break the much used --mem feature of mtr.
mysql-test/t/loaddata.test:
* Removed test code which will currently break the much used --mem feature of mtr.
sql/item_strfunc.cc:
* Replaced string comparing code on opt_secure_file_priv with an interface which guarantees that both file paths are normalized using the same norm on all platforms.
sql/mysql_priv.h:
* Added signature for is_secure_file_path()
sql/mysqld.cc:
* New function for checking if a path compatible with the secure path restriction.
* Added initialization of the opt_secure_file_priv variable.
sql/sql_class.cc:
* Replaced string comparing code on opt_secure_file_priv with an interface which guarantees that both file paths are normalized using the same norm on all platforms.
sql/sql_load.cc:
* Replaced string comparing code on opt_secure_file_priv with an interface which guarantees that both file paths are normalized using the same norm on all platforms.
Conflicts:
Text conflict in configure.in
Text conflict in dbug/dbug.c
Text conflict in mysql-test/r/ps.result
Text conflict in mysql-test/t/ps.test
Text conflict in sql/CMakeLists.txt
Text conflict in sql/ha_ndbcluster.cc
Text conflict in sql/mysqld.cc
Text conflict in sql/sql_plugin.cc
Text conflict in sql/sql_table.cc
Statements with CONNECTION_ID were forced to be kept in the transactional
cache and by consequence non-transactional changes that were supposed to
be flushed ahead of the transaction were kept in the transactional cache.
This happened because after BUG#51894 any statement whose thd's
thread_specific_used was set was kept in the transactional cache. The idea
was to keep changes on temporary tables in the transactional cache. However,
the thread_specific_used was set not only for statements that accessed
temporary tables but also when the CONNECTION_ID was used.
To fix the problem, we created a new variable to keep track of updates
to temporary tables.
mysql-test/suite/rpl/r/rpl_temp_temporary.result:
Added a test case.
mysql-test/suite/rpl/t/rpl_temp_temporary.test:
Added a test case.
sql/log_event.cc:
Uses the thread_temporary_used to decide if a statement should
be kept in the transactional cache or not.
sql/sql_class.cc:
Sets the thread_temporary_used while calling the decide_logging_format.
sql/sql_class.h:
Defines the thread_temporary_used.
sql/sql_parse.cc:
Resets the thread_temporary_used.
transaction
BUG#52616 Temp table prevents switch binlog format from STATEMENT to ROW
Before the WL#2687 and BUG#46364, every non-transactional change that happened
after a transactional change was written to trx-cache and flushed upon
committing the transaction. WL#2687 and BUG#46364 changed this behavior and
non-transactional changes are now written to the binary log upon committing
the statement.
A binary log event is identified as transactional or non-transactional through
a flag in the Log_event which is set taking into account the underlie storage
engine on what it is stems from. In the current bug, this flag was not being
set properly when the DROP TEMPORARY TABLE was executed.
However, while fixing this bug we figured out that changes to temporary tables
should be always written to the trx-cache if there is an on-going transaction.
Otherwise, binlog events in the reversed order would be produced.
Regarding concurrency, keeping changes to temporary tables in the trx-cache is
also safe as temporary tables are only visible to the owner connection.
In this patch, we classify the following statements as unsafe:
1 - INSERT INTO t_myisam SELECT * FROM t_myisam_temp
2 - INSERT INTO t_myisam_temp SELECT * FROM t_myisam
3 - CREATE TEMPORARY TABLE t_myisam_temp SELECT * FROM t_myisam
On the other hand, the following statements are classified as safe:
1 - INSERT INTO t_innodb SELECT * FROM t_myisam_temp
2 - INSERT INTO t_myisam_temp SELECT * FROM t_innodb
The patch also guarantees that transactions that have a DROP TEMPORARY are
always written to the binary log regardless of the mode and the outcome:
commit or rollback. In particular, the DROP TEMPORARY is extended with the
IF EXISTS clause when the current statement logging format is set to row.
Finally, the patch allows to switch from STATEMENT to MIXED/ROW when there
are temporary tables but the contrary is not possible.
mysql-test/extra/rpl_tests/rpl_binlog_max_cache_size.test:
Updated the test case because
CREATE TEMPORARY TABLE t_innodb_temp SELECT * FROM t_myisam is not unsafe.
mysql-test/extra/rpl_tests/rpl_implicit_commit_binlog.test:
Updated the test case due to the new rules: changes to
temporary tables are written to the binary log in the
boundaries of a transaction if there is any.
mysql-test/extra/rpl_tests/rpl_innodb.test:
Removed comments from the test case that became false after the patch.
mysql-test/extra/rpl_tests/rpl_loaddata.test:
Suppressed warning messages due to the following cases:
1 - INSERT INTO t_myisam SELECT * FROM t_myisam_temp
2 - INSERT INTO t_myisam_temp SELECT * FROM t_myisam
mysql-test/include/ctype_utf8_table.inc:
Suppressed warning messages due to the following cases:
1 - INSERT INTO t_myisam SELECT * FROM t_myisam_temp
2 - INSERT INTO t_myisam_temp SELECT * FROM t_myisam
mysql-test/r/ctype_cp932_binlog_stm.result:
Updated the test case due to the new rules: changes to
temporary tables are written to the binary log in the
boundaries of a transaction if there is any.
mysql-test/suite/binlog/r/binlog_database.result:
Updated the test case due to the new rules: changes to
temporary tables are written to the binary log in the
boundaries of a transaction if there is any.
mysql-test/suite/binlog/r/binlog_innodb_row.result:
Updated the result file.
mysql-test/suite/binlog/r/binlog_multi_engine.result:
Updated the unsafe message.
mysql-test/suite/binlog/r/binlog_row_binlog.result:
Updated the test case due to the new rules: changes to
temporary tables are written to the binary log in the
boundaries of a transaction if there is any.
mysql-test/suite/binlog/r/binlog_row_drop_tmp_tbl.result:
Updated the test case due to the new rules: changes to
temporary tables are written to the binary log in the
boundaries of a transaction if there is any.
mysql-test/suite/binlog/r/binlog_row_mix_innodb_myisam.result:
Updated the test case due to the new rules: changes to
temporary tables are written to the binary log in the
boundaries of a transaction if there is any.
mysql-test/suite/binlog/r/binlog_stm_binlog.result:
Updated the result file.
mysql-test/suite/binlog/r/binlog_stm_mix_innodb_myisam.result:
Updated the test case due to the new rules: changes to
temporary tables are written to the binary log in the
boundaries of a transaction if there is any.
mysql-test/suite/binlog/t/binlog_tmp_table.test:
Suppressed warning messages due to the following cases:
1 - INSERT INTO t_myisam SELECT * FROM t_myisam_temp
2 - INSERT INTO t_myisam_temp SELECT * FROM t_myisam
mysql-test/suite/ndb/r/ndb_binlog_format.result:
Updated the unsafe message.
mysql-test/suite/rpl/r/rpl_concurrency_error.result:
Updated the unsafe message.
mysql-test/suite/rpl/r/rpl_mixed_binlog_max_cache_size.result:
Updated the result file because
CREATE TEMPORARY TABLE t_innodb_temp SELECT * FROM t_myisam is not unsafe.
mysql-test/suite/rpl/r/rpl_mixed_implicit_commit_binlog.result:
Updated the test case due to the new rules: changes to
temporary tables are written to the binary log in the
boundaries of a transaction if there is any.
mysql-test/suite/rpl/r/rpl_mixed_mixing_engines.result:
Updated the test case due to the new rules: changes to
temporary tables are written to the binary log in the
boundaries of a transaction if there is any.
mysql-test/suite/rpl/r/rpl_mixed_row_innodb.result:
Added some comments to ease the understanding of the result file.
mysql-test/suite/rpl/r/rpl_non_direct_mixed_mixing_engines.result:
Updated the test case due to the new rules: changes to
temporary tables are written to the binary log in the
boundaries of a transaction if there is any.
mysql-test/suite/rpl/r/rpl_non_direct_row_mixing_engines.result:
Updated the test case due to the new rules: changes to
temporary tables are written to the binary log in the
boundaries of a transaction if there is any.
mysql-test/suite/rpl/r/rpl_non_direct_stm_mixing_engines.result:
Updated the test case due to the new rules: changes to
temporary tables are written to the binary log in the
boundaries of a transaction if there is any.
mysql-test/suite/rpl/r/rpl_row_drop.result:
Updated the test case due to the new rules: changes to
temporary tables are written to the binary log in the
boundaries of a transaction if there is any.
mysql-test/suite/rpl/r/rpl_row_implicit_commit_binlog.result:
Updated the test case due to the new rules: changes to
temporary tables are written to the binary log in the
boundaries of a transaction if there is any.
mysql-test/suite/rpl/r/rpl_row_mixing_engines.result:
Updated the test case due to the new rules: changes to
temporary tables are written to the binary log in the
boundaries of a transaction if there is any.
mysql-test/suite/rpl/r/rpl_stm_binlog_max_cache_size.result:
Updated the result file because
CREATE TEMPORARY TABLE t_innodb_temp SELECT * FROM t_myisam is not unsafe.
mysql-test/suite/rpl/r/rpl_stm_implicit_commit_binlog.result:
Updated the test case due to the new rules: changes to
temporary tables are written to the binary log in the
boundaries of a transaction if there is any.
mysql-test/suite/rpl/r/rpl_stm_innodb.result:
Added some comments to ease the understanding of the result file.
mysql-test/suite/rpl/r/rpl_stm_mixing_engines.result:
Updated the test case due to the new rules: changes to
temporary tables are written to the binary log in the
boundaries of a transaction if there is any.
mysql-test/suite/rpl/r/rpl_stm_stop_middle_group.result:
Updated the unsafe message.
mysql-test/suite/rpl/r/rpl_temp_temporary.result:
Added a test case.
mysql-test/suite/rpl/t/rpl000013.test:
Suppressed warning messages due to the following cases:
1 - INSERT INTO t_myisam SELECT * FROM t_myisam_temp
2 - INSERT INTO t_myisam_temp SELECT * FROM t_myisam
3 - CREATE TEMPORARY TABLE t_myisam_temp SELECT * FROM t_myisam
mysql-test/suite/rpl/t/rpl_misc_functions.test:
Suppressed warning messages.
mysql-test/suite/rpl/t/rpl_temp_table.test:
Suppressed warning messages due to the following cases:
1 - INSERT INTO t_myisam SELECT * FROM t_myisam_temp
2 - INSERT INTO t_myisam_temp SELECT * FROM t_myisam
3 - CREATE TEMPORARY TABLE t_myisam_temp SELECT * FROM t_myisam
mysql-test/suite/rpl/t/rpl_temp_temporary.test:
Added a test case.
mysql-test/suite/rpl/t/rpl_temporary.test:
Suppressed warning messages due to the following cases:
1 - INSERT INTO t_myisam SELECT * FROM t_myisam_temp
2 - INSERT INTO t_myisam_temp SELECT * FROM t_myisam
3 - CREATE TEMPORARY TABLE t_myisam_temp SELECT * FROM t_myisam
mysql-test/suite/rpl_ndb/r/rpl_ndb_row_implicit_commit_binlog.result:
Updated the test case due to the new rules: changes to
temporary tables are written to the binary log in the
boundaries of a transaction if there is any.
mysql-test/suite/rpl_ndb/r/rpl_truncate_7ndb.result:
Updated the test case to remove references to positions
in the binary log.
mysql-test/suite/rpl_ndb/t/rpl_truncate_7ndb.test:
Updated the test case to remove references to positions
in the binary log.
mysql-test/t/create_select_tmp.test:
Suppressed warning messages due to the following cases:
1 - INSERT INTO t_myisam SELECT * FROM t_myisam_temp
2 - INSERT INTO t_myisam_temp SELECT * FROM t_myisam
3 - CREATE TEMPORARY TABLE t_myisam_temp SELECT * FROM t_myisam
mysql-test/t/ctype_cp932_binlog_stm.test:
Suppressed warning messages due to the following cases:
1 - INSERT INTO t_myisam SELECT * FROM t_myisam_temp
2 - INSERT INTO t_myisam_temp SELECT * FROM t_myisam
3 - CREATE TEMPORARY TABLE t_myisam_temp SELECT * FROM t_myisam
mysql-test/t/mysqlbinlog.test:
Suppressed warning messages due to the following cases:
1 - INSERT INTO t_myisam SELECT * FROM t_myisam_temp
2 - INSERT INTO t_myisam_temp SELECT * FROM t_myisam
3 - CREATE TEMPORARY TABLE t_myisam_temp SELECT * FROM t_myisam
sql/log.cc:
Improved the code by creating several functions to hide decision
on type of engine changed, commit/abort, etc:
. stmt_has_updated_non_trans_table
. trans_has_updated_non_trans_table
. ending_trans
Updated the binlog_rollback function and the use of the
OPTION_KEEP_LOG which indincates when a temporary table was
either created or dropped and as such the command must be
logged if not in MIXED mode and even while rolling back the
transaction.
sql/log.h:
Improved the code by creating several functions to hide decision
on type of engine changed, commit/abort, etc.
sql/log_event.cc:
Removed the setting of the OPTION_KEEP_LOG as it is related to CREATE
TEMPORARY and DROP TEMPORARY and not to the type of engine (i.e.
transactional or non-transactional).
sql/log_event_old.cc:
Removed the setting of the OPTION_KEEP_LOG as it is related to CREATE
TEMPORARY and DROP TEMPORARY and not to the type of engine (i.e.
transactional or non-transactional).
sql/share/errmsg-utf8.txt:
Updated the unsafe message.
sql/sql_class.cc:
Classifies the following statements as unsafe:
1 - INSERT INTO t_myisam SELECT * FROM t_myisam_temp
2 - INSERT INTO t_myisam_temp SELECT * FROM t_myisam
On the other hand, the following statements are classified as safe:
1 - INSERT INTO t_innodb SELECT * FROM t_myisam_temp
2 - INSERT INTO t_myisam_temp SELECT * FROM t_innodb
sql/sql_class.h:
It allows to switch from STATEMENT to MIXED/ROW when there are temporary
tables but the contrary is not possible.
sql/sql_table.cc:
Fixed the case that a DROP/DROP TEMPORARY that affects a temporary table in MIXED
mode is written as a DROP TEMPORARY TABLE IF EXISTS because the table may not exist in the slave and due to the IF EXISTS token an error will never happen
while processing the statement in the slave.
Removed a function that was not being used.
to cleanup open connections
It was possible to UNINSTALL storage engine plugin when binding
between THD object and storage engine is still active (e.g. in
the middle of transaction).
To avoid unclean deactivation (uninstall) of storage engine plugin
in the middle of transaction, additional storage engine plugin
lock is acquired by thd_set_ha_data().
If ha_data is not null and storage engine plugin was not locked
by thd_set_ha_data() in this connection before, storage engine
plugin gets locked.
If ha_data is null and storage engine plugin was locked by
thd_set_ha_data() in this connection before, storage engine
plugin lock gets released.
If handlerton::close_connection() didn't reset ha_data, server does
it immediately after calling handlerton::close_connection().
Note that this is just a framework fix, storage engines must switch
to thd_set_ha_data() from thd_ha_data() if they want to see fit.
include/mysql/plugin.h:
As thd_{get|set}_ha_data() have some extra logic now, they
must be implemented on server side.
include/mysql/plugin.h.pp:
As thd_{get|set}_ha_data() have some extra logic now, they
must be implemented on server side.
sql/handler.cc:
Make sure ha_data is reset and ha_data lock is released.
sql/handler.h:
hton is not supposed to be updated by ha_lock_engine(),
make it const.
sql/sql_class.cc:
As thd_{get|set}_ha_data() have some extra logic now, they
must be implemented on server side.
sql/sql_class.h:
Added ha_data lock.
Adding my_global.h first in all files using
NO_EMBEDDED_ACCESS_CHECKS.
Correcting a merge problem resulting from a changed definition
of check_some_access compared to the original patches.
Conflicts:
Text conflict in mysql-test/suite/binlog/r/binlog_row_mix_innodb_myisam.result
Text conflict in sql/log.cc
Text conflict in sql/set_var.cc
Text conflict in sql/sql_class.cc
This patch:
- Moves all definitions from the mysql_priv.h file into
header files for the component where the variable is
defined
- Creates header files if the component lacks one
- Eliminates all include directives from mysql_priv.h
- Eliminates all circular include cycles
- Rename time.cc to sql_time.cc
- Rename mysql_priv.h to sql_priv.h
BUG#46364 introduced the flag binlog_direct_non_transactional_updates which
would make N-changes to be written to the binary log upon committing the
statement when "ON". On the other hand, when "OFF" the option was supposed
to mimic the behavior in 5.1. However, the implementation was not mimicking
the behavior correctly and the following bugs popped up:
Case #1: N-changes executed within a transaction would go into
the S-cache. When later in the same transaction a
T-change occurs, N-changes following it were written
to the T-cache instead of the S-cache. In some cases,
this raises problems. For example, a
Table_map_log_event being written initially into the
S-cache, together with the initial N-changes, would be
absent from the T-cache. This would log N-changes
orphaned from a Table_map_log_event (thence discarded
at the slave). (MIXED and ROW)
Case #2: When rolling back a transaction, the N-changes that
might be in the T-cache were disregarded and
truncated along with the T-changes. (MIXED and ROW)
Case #3: When a MIXED statement (TN) is ahead of any other
T-changes in the transaction and it fails, it is kept
in the T-cache until the transaction ends. This is
not the case in 5.1 or Betony (5.5.2). In these, the
failed TN statement would be written to the binlog at
the same instant it had failed and not deferred until
transaction end. (SBR)
To fix these problems, we have decided to do what follows:
For Case #1 and #2, we circumvent them:
1. by not letting binlog_direct_non_transactional_updates
affect MIXED and RBR. These modes will keep the behavior
provided by WL#2687. Although this will make Celosia to
behave differently from 5.1, an execution will be always
safe under such modes in the sense that slaves will never
go out sync. In 5.1, using either MIXED or ROW while
mixing N-statements and T-statements was not safe.
For Case #3, we don't actually fix it. We:
1. keep it and make all MIXED statements whether they end
up failing or not or whether they are up front in the
transaction or after some transactional change to always
be stored in the T-cache. This means that it is written
to the binary log on transaction commit/rollback only.
2. We make the warning message even more specific about the
MIXED statement and SBR.
mysql-test/extra/rpl_tests/rpl_mixing_engines.test:
Updated the test case to avoid checking inconsistencies between the master and slave
when session.binlog_direct_non_transactional_updates is ON and the format is statement.
In this scenario, they will diverge because a counter (within a triger) is incremented
and associated to the issued statement. However, an n-statement is logged ahead of
the transaction and thus is not executed by the same order in the slave and thus gets
a different value from the counter.
mysql-test/suite/binlog/r/binlog_multi_engine.result:
Updated the test case with the new error ER_BINLOG_UNSAFE_MIXED_STATEMENT.
mysql-test/suite/binlog/r/binlog_stm_mix_innodb_myisam.result:
Updated the test case with the new error ER_BINLOG_UNSAFE_MIXED_STATEMENT.
mysql-test/suite/ndb/r/ndb_binlog_format.result:
Updated the test case with the new error ER_BINLOG_UNSAFE_MIXED_STATEMENT.
mysql-test/suite/rpl/r/rpl_concurrency_error.result:
Updated the test case with the new error ER_BINLOG_UNSAFE_MIXED_STATEMENT.
mysql-test/suite/rpl/r/rpl_stm_binlog_max_cache_size.result:
Updated the test case with the new error ER_BINLOG_UNSAFE_MIXED_STATEMENT.
mysql-test/suite/rpl/r/rpl_stm_mixing_engines.result:
Updated the test case with the new error ER_BINLOG_UNSAFE_MIXED_STATEMENT.
mysql-test/suite/rpl/r/rpl_stm_stop_middle_group.result:
Updated the test case with the new error ER_BINLOG_UNSAFE_MIXED_STATEMENT.
sql/log.cc:
Checked if either a trx-cache or a non-trx-cache should be used.
If bin_log_direct_non_trans_update is active or the format is either
MIXED or ROW, the cache to be used depends on the flag is_transactional.
When the format is STMT, the non-trx-cache should be used if the statement
is non-transactional and the trx-cache is empty, i.e. if any transactional
statement has not committed yet. Otherwise, the trx-cache should be used.
sql/share/errmsg-utf8.txt:
Added the new unsafe error ER_BINLOG_UNSAFE_MIXED_STATEMENT.
sql/sql_class.cc:
Started printing ER_BINLOG_UNSAFE_MIXED_STATEMENT, when there
is a mixed-statement.
Organized the names of the variables and added comments.
sql/sql_lex.cc:
Added the new unsafe error ER_BINLOG_UNSAFE_MIXED_STATEMENT.
sql/sql_lex.h:
Added the new unsafe error ER_BINLOG_UNSAFE_MIXED_STATEMENT.
CHECK_FIELD_IGNORE was treated as CHECK_FIELD_ERROR_FOR_NULL;
UPDATE...SET...NULL on NOT NULL fields behaved differently after
a trigger.
Now distinguishes between IGNORE and ERROR_FOR_NULL and save/restores
check-field options.
mysql-test/r/trigger.result:
Show that UPDATE...SET...NULL on NOT NULL columns doesn't behave differently
when run after a trigger.
mysql-test/t/trigger.test:
Show that UPDATE...SET...NULL on NOT NULL columns doesn't behave differently
when run after a trigger.
sql/field_conv.cc:
CHECK_FIELD_IGNORE was treated as CHECK_FIELD_ERROR_FOR_NULL.
Distinguish between the two.
sql/sp_head.cc:
Raise error as needed.
sql/sql_class.cc:
Save and restore check-fields options.
sql/sql_class.h:
Make room so we can save check-fields options.
sql/sql_insert.cc:
Raise error as needed.
Reading from a self-logging engine and updating a transactional engine such as Innodb
generates changes that are written to the binary log in the statement format and may
make slaves diverge. In the mixed mode, such changes should be written to the binary
log in the row format.
Note that the issue does not happen if we mix a self-logging engine and MyIsam
as this case is caught by checking the mixture of non-transactional and transactional
engines.
So, we classify a mixed statement where one reads from NDB and writes into another
engine as unsafe:
if (multi_engine && flags_some_set & HA_HAS_OWN_BINLOGGING)
lex->set_stmt_unsafe(LEX::BINLOG_STMT_UNSAFE_MULTIPLE_ENGINES_AND_SELF_LOGGING_ENGINE);
mysql-test/suite/rpl_ndb/r/rpl_ndb_mixed_engines_transactions.result:
Augmented test case to check mixed statements
mysql-test/suite/rpl_ndb/t/rpl_ndb_mixed_engines_transactions.test:
Augmented test case to check mixed statements
sql/share/errmsg-utf8.txt:
Added ER_BINLOG_UNSAFE_MULTIPLE_ENGINES_AND_SELF_LOGGING_ENGINE
sql/sql_class.cc:
Redefined flags' name in order to have two sets of flags: (i) flags that are checked when there
is a write operation; (ii) flags that are checked regardless of the type of the operation.
Classified a mixed statement where one reads from NDB and writes into another engine as unsafe:
if (multi_engine && flags_some_set & HA_HAS_OWN_BINLOGGING)
lex->set_stmt_unsafe(LEX::BINLOG_STMT_UNSAFE_MULTIPLE_ENGINES_AND_SELF_LOGGING_ENGINE);
sql/sql_lex.cc:
Added error ER_BINLOG_UNSAFE_MULTIPLE_ENGINES_AND_SELF_LOGGING_ENGINE
sql/sql_lex.h:
Added BINLOG_STMT_UNSAFE_MULTIPLE_ENGINES_AND_SELF_LOGGING_ENGINE
CHECK_FIELD_IGNORE was treated as CHECK_FIELD_ERROR_FOR_NULL;
UPDATE...SET...NULL on NOT NULL fields behaved differently after
a trigger.
Now distinguishes between IGNORE and ERROR_FOR_NULL and save/restores
check-field options.
mysql-test/r/trigger.result:
Show that UPDATE...SET...NULL on NOT NULL columns doesn't behave differently
when run after a trigger.
mysql-test/t/trigger.test:
Show that UPDATE...SET...NULL on NOT NULL columns doesn't behave differently
when run after a trigger.
sql/field_conv.cc:
CHECK_FIELD_IGNORE was treated as CHECK_FIELD_ERROR_FOR_NULL.
Distinguish between the two.
sql/sp_head.cc:
raise error as needed
sql/sql_class.cc:
Save and restore check-fields options.
sql/sql_class.h:
Make room so we can save check-fields options.
sql/sql_insert.cc:
raise error as needed
