on any access
Archive engine for 5.1 (and latter) version uses a modified
version of zlib (azlib). These two version are incompatible
so a proper upgrade is needed before tables created in 5.0
can be used reliable.
This upgrade can be performed using repair. But due to lack
of test its risky to allow upgrade for now. This patch addresses
only the crashing issue. Any attempt to repair will be blocked.
Eventually repair can be allowed to run through (which will also
cause an upgrade from older version to newer) but only after a
thorough testing.
mysql-test/r/archive.result:
Updated result file for test case for bug#47012
mysql-test/std_data/bug47012.ARM:
part of archive table (t1) created in mysql 5.0
mysql-test/std_data/bug47012.ARZ:
part of archive table (t1) created in mysql 5.0
mysql-test/std_data/bug47012.frm:
part of archive table (t1) created in mysql 5.0
mysql-test/t/archive.test:
Added test case for bug#47012.
storage/archive/azio.c:
Fixed a minor issues (minor version overwriting version in
stream structure)
Removed assertion when an older version is found. Instead
setting the correct version (2) in s->version
If an unknown version is found marked it as corrupt.
storage/archive/ha_archive.cc:
Detecting the archive version in getShare and marking
it as need to upgrade.
Blocking open if the archive needs an upgrade. This
can be allowed in case of open for repair to upgrade
the archive but needs to tested.
The additional patch. That 'loadxml.test' failure was actually about our testing system,
not the code.
Firstly we need a new mysqltest command, wich i called 'send_eval'. So the expression
can be evaluated, then started in a parallel thread. We only have separane 'send' and
'eval' commands at the moment.
Then we need to add the waiting code after the 'KILL' to our test, so the thread will be killed
before the test goes further. The present 'reap' command doesn't handle the killed threads
well.
per-file comments:
client/mysqltest.cc
Bug#42520 killing load .. infile Assertion failed: ! is_set(), file .\sql_error.cc, line 8
The 'send_eval' command implemented.
mysql-test/r/loadxml.result
Bug#42520 killing load .. infile Assertion failed: ! is_set(), file .\sql_error.cc, line 8
test result updated.
mysql-test/t/loadxml.test
Bug#42520 killing load .. infile Assertion failed: ! is_set(), file .\sql_error.cc, line 8
test case added.
------------------------------------------------------------
revno: 2476.784.4
revision-id: sp1r-davi@moksha.local-20071008114751-46069
parent: sp1r-davi@moksha.local-20071003002731-48537
committer: davi@moksha.local
timestamp: Mon 2007-10-08 08:47:51 -0300
message:
Bug#27249 table_wild with alias: select t1.* as something
Aliases to table wildcards are silently ignored, but they should
not be allowed as it is non-standard and currently useless. There
is not point in having a alias to a wildcard of column names.
The solution is to rewrite the select_item rule so that aliases
for table wildcards are not accepted.
Contribution by Martin Friebe
mysql-test/r/alias.result:
Add test case result for Bug#27249
mysql-test/t/alias.test:
Add test case for Bug#27249
sql/sql_yacc.yy:
Split up select_item rule so that aliases for table wildcards
are not accepted by the parser.
------------------------------------------------------------
revno: 2597.4.17
revision-id: sp1r-davi@mysql.com/endora.local-20080328174753-24337
parent: sp1r-anozdrin/alik@quad.opbmk-20080328140038-16479
committer: davi@mysql.com/endora.local
timestamp: Fri 2008-03-28 14:47:53 -0300
message:
Bug#15192 "fatal errors" are caught by handlers in stored procedures
The problem is that fatal errors (e.g.: out of memory) were being
caught by stored procedure exception handlers which could cause
the execution to not be stopped due to a continue handler.
The solution is to not call any exception handler if the error is
fatal and send the fatal error to the client.
mysql-test/r/sp-error.result:
Add test case result for Bug#15192
mysql-test/t/sp-error.test:
Add test case for Bug#15192
mysys/my_alloc.c:
Pass flag to signal fatal error in memory root allocations.
sql/event_data_objects.cc:
Use init_sql_alloc to initialize memory roots, which uses
the sql error handler to push errors.
sql/ha_partition.cc:
Pass flag to signal fatal error instead of calling fatal_error.
sql/item_func.cc:
Pass flag to signal fatal error instead of calling fatal_error.
sql/item_subselect.cc:
Remove redundant fatal error, memory root already pushes error.
sql/opt_sum.cc:
Pass flag to signal fatal error instead of calling fatal_error.
sql/sp_head.cc:
Allocator already sets fatal error.
sql/sql_class.h:
A error must exist for it to be fatal. Pass flag to signal fatal
error instead of calling fatal_error.
sql/sql_insert.cc:
Pass flag to signal fatal error instead of calling fatal_error.
sql/sql_list.h:
Pass flag to signal fatal error instead of calling fatal_error.
sql/sql_parse.cc:
Pass flag to signal fatal error instead of calling fatal_error.
sql/sql_partition.cc:
Pass flag to signal fatal error instead of calling fatal_error.
sql/sql_select.cc:
Pass flag to signal fatal error instead of calling fatal_error.
sql/sql_servers.cc:
Use init_sql_alloc to initialize memory roots, which uses
the sql error handler to push errors.
sql/sql_show.cc:
Pass flag to signal fatal error instead of calling fatal_error.
sql/sql_trigger.cc:
Use init_sql_alloc to initialize memory roots, which uses
the sql error handler to push errors.
sql/sql_update.cc:
Pass flag to signal fatal error instead of calling fatal_error.
sql/tztime.cc:
Use init_sql_alloc to initialize memory roots, which uses
the sql error handler to push errors.
------------------------------------------------------------
revno: 3317
revision-id: davi.arnaut@sun.com-20090522170916-fzc5ca3tjs9roy1t
parent: patrick.crews@sun.com-20090522152933-ole8s3suy4zqyvku
committer: Davi Arnaut <Davi.Arnaut@Sun.COM>
branch nick: 41860-6.0
timestamp: Fri 2009-05-22 14:09:16 -0300
message:
Bug#41860: Without Windows named pipe
The problem was that the patch for Bug#10374 broke named pipe
and shared memory transports on Windows due to a failure to
implement a dummy poll method for transports other than BSD
sockets. Another problem was that mysqltest lacked support
for named pipe and shared memory connections, which lead to
misleading test cases that were supposed run common queries
over both transports.
The solution is to properly implement, at the VIO layer, the
poll and is_connected methods. The is_connected method is
implemented for every suppported transport and the poll one
only where it makes sense. Furthermore, support for named pipe
and shared memory connections is added to mysqltest as to
enable testing of both transports using the test suite.
client/mysqltest.cc:
Add support for named pipe and shared memory connections.
include/violite.h:
Move private functions to vio/vio_priv.h
Add poll_read and is_connected methods.
mysql-test/t/named_pipe.test:
Run tests over a named pipe connection.
mysql-test/t/shm.test:
Run tests over a shared memory connection.
sql/item_func.cc:
Rename method.
sql/sql_class.cc:
Remove higher-level vio_is_connected implementation.
sql/sql_class.h:
Rename vio_is_connected to not conflict with the vio one.
Verify that there is a valid vio.
vio/vio.c:
Add poll_read and is_connected methods.
vio/vio_priv.h:
Add private functions.
vio/viosocket.c:
Implement the is_connected method for the various transports.
------------------------------------------------------------
revno: 2597.37.3
revision-id: sp1r-davi@mysql.com/endora.local-20080328123626-16430
parent: sp1r-anozdrin/alik@quad.opbmk-20080327125300-11290
committer: davi@mysql.com/endora.local
timestamp: Fri 2008-03-28 09:36:26 -0300
message:
Bug#10374 GET_LOCK does not let connection to close on the server side if it's aborted
The problem is that the server doesn't detect aborted connections which
are waiting on a lock or sleeping (user sleep), wasting system resources
for a connection that is already dead.
The solution is to peek at the connection every five seconds to verify if
the connection is not aborted. A aborted connection is detect by polling
the connection socket for available data to be read or end of file and in
case of eof, the wait is aborted and the connection killed.
include/violite.h:
Export vio_peek_read function.
mysql-test/r/dirty_close.result:
Add test case result for Bug#10374
mysql-test/t/dirty_close.test:
Add test case for Bug#10374
sql/item_func.cc:
While waiting for a condition to be signaled, check if the connection
is not broken every INTERRUPT_INTERVAL seconds.
sql/sql_class.cc:
Add function which checks if the client connection was aborted.
sql/sql_class.h:
Add function prototype.
vio/viosocket.c:
Add poll and peek functions for Windows and Unix.
------------------------------------------------------------
revno: 2572.2.1
revision-id: sp1r-davi@mysql.com/endora.local-20080227225948-16317
parent: sp1r-anozdrin/alik@quad.-20080226165712-10409
committer: davi@mysql.com/endora.local
timestamp: Wed 2008-02-27 19:59:48 -0300
message:
Bug#27525 table not found when using multi-table-deletes with aliases over several databas
Bug#30234 Unexpected behavior using DELETE with AS and USING
The multi-delete statement has a documented limitation that
cross-database multiple-table deletes using aliases are not
supported because it fails to find the tables by alias if it
belongs to a different database. The problem is that when
building the list of tables to delete from, if a database
name is not specified (maybe an alias) it defaults to the
name of the current selected database, making impossible to
to properly resolve tables by alias later. Another problem
is a inconsistency of the multiple table delete syntax that
permits ambiguities in a delete statement (aliases that refer
to multiple different tables or vice-versa).
The first step for a solution and proper implementation of
the cross-databse multiple table delete is to get rid of any
ambiguities in a multiple table statement. Currently, the parser
is accepting multiple table delete statements that have no obvious
meaning, such as:
DELETE a1 FROM db1.t1 AS a1, db2.t2 AS a1;
DELETE a1 AS a1 FROM db1.t1 AS a1, db2.t2 AS a1;
The solution is to resolve the left part of a delete statement
using the right part, if the a table on right has an alias,
it must be referenced in the left using the given alias. Also,
each table on the left side must match unambiguously only one
table in the right side.
mysql-test/r/delete.result:
Add test case result for Bug#27525 and Bug#21148
mysql-test/r/derived.result:
Update error.
mysql-test/suite/rpl/r/rpl_multi_delete2.result:
Update syntax.
mysql-test/suite/rpl/t/rpl_multi_delete2.test:
Update syntax.
mysql-test/t/delete.test:
Add test case for Bug#27525 and Bug#21148
mysql-test/t/derived.test:
Update statement error, alias is properly resolved now.
sql/sql_parse.cc:
Implement new algorithm for the resolution of alias in
a multiple table delete statement.
sql/sql_yacc.yy:
Rework multi-delete parser rules to not accept table alias
for the table source list.
sql/table.h:
Add flag to signal that the table has a alias set or
that fully qualified table name was given.
------------------------------------------------------------
revno: 2630.39.3
revision-id: davi.arnaut@sun.com-20081210215359-i876m4zgc2d6rzs3
parent: kostja@sun.com-20081208222938-9es7wl61moli71ht
committer: Davi Arnaut <Davi.Arnaut@Sun.COM>
branch nick: 36649-6.0
timestamp: Wed 2008-12-10 19:53:59 -0200
message:
Bug#36649: Condition area is not properly cleaned up after stored routine invocation
The problem is that the diagnostics area of a trigger is not
isolated from the area of the statement that caused the trigger
invocation. In MySQL terms, it means that warnings generated
during the execution of the trigger are not removed from the
"warning area" at the end of the execution.
Before this fix, the rules for MySQL message list life cycle (see
manual entry for SHOW WARNINGS) did not apply to statements
inside stored programs:
- The manual says that the list of messages is cleared by a
statement that uses a table (any table). However, such
statement, if run inside a stored program did not clear the
message list.
- The manual says that the list is cleared by a statement that
generates a new error or a warning, but this was not the case
with stored program statements either and is changed to be the
case as well.
In other words, after this fix, a statement has the same effect
on the message list regardless of whether it's executed inside a
stored program/sub-statement or not.
This introduces an incompatible change:
- before this fix, a, e.g. statement inside a trigger could
never clear the global warning list
- after this fix, a trigger that generates a warning or uses a
table, clears the global warning list
- however, when we leave a trigger or a function, the caller's
warning information is restored (see more on this below).
This change is not backward compatible as it is intended to make
MySQL behavior similar to the SQL standard behavior:
A stored function or trigger will get its own "warning area" (or,
in standard terminology, diagnostics area). At the beginning of
the stored function or trigger, all messages from the caller area
will be copied to the area of the trigger. During execution, the
message list will be cleared according to the MySQL rules
described on the manual (SHOW WARNINGS entry). At the end of the
function/trigger, the "warning area" will be destroyed along with
all warnings it contains, except that if the last statement of
the function/trigger generated messages, these are copied into
the "warning area" of the caller.
Consequently, statements that use a table or generate a warning
*will* clear warnings inside the trigger, but that will have no
effect to the warning list of the calling (outer) statement.
mysql-test/r/sp.result:
Fix test case results.
mysql-test/r/trigger.result:
Fix test case results.
mysql-test/t/sp.test:
Add test case for Bug#36649
mysql-test/t/trigger.test:
Add test case for Bug#36649
sql/sp_head.cc:
Emulate multiple warning areas -- one per stored program instance.
sql/sql_parse.cc:
Message list reset rules are the same for statements inside
or outside compound statements.
------------------------------------------------------------
revno: 3624
revision-id: jon.hauglid@sun.com-20090928163426-2lg1gofzz44xzzxf
parent: alik@sun.com-20090928050057-r0a62x9czr01q7oe
committer: Jon Olav Hauglid <jon.hauglid@sun.com>
branch nick: mysql-6.0-codebase-bugfixing-bug47304
timestamp: Mon 2009-09-28 18:34:26 +0200
message:
Bug #47304 Test main.mdl_sync fails on embedded server
The problem was that SHOW PROCESSLIST was trying to access
a thread that was not properly running and therefore had an
uninitialized mutex.
This patch explicitly resets thd->mysys_var after each embedded
server command to prevent the mutex from being accessed in an
illegal state.
The patch also re-enables lock_multi.test and mdl_sync.test for
embedded server as they had been disabled because of this bug.
mysql-next-mr-bugfixing.
Bug no 32858 was fixed in two different ways in what was
then called mysql 5.1 and 6.0. The fix in 6.0 was very
different since bugfix no 33204 was present. Furthermore,
the two fixes were not compatible. Hence in order to
backport Bug#33204 to the 5.1-based mysql-next-mr-bugfixing,
it was necessary to remove the 5.1 fix of 32858 and apply
the 6.0 version of the fix.
mysql-test/r/subselect.result:
Bug#33204-backport: Test result
mysql-test/r/union.result:
Bug#33204-backport:
- Reversal of test result: bugfix no 32858 for 5.1
- Application of test result: bugfix no 32858 for 6.0
mysql-test/t/subselect.test:
Bug#33204-backport:
- Changed tests
- Test case
mysql-test/t/union.test:
Bug#33204-backport:
- Reversal of test: bugfix no 32858 for 5.1
- Application of test: bugfix no 32858 for 6.0
sql/sql_class.cc:
Bug#33204-backport: Reversal of bugfix no 32858 for 5.1
sql/sql_class.h:
Bug#33204-backport: Reversal of bugfix no 32858 for 5.1
sql/sql_yacc.yy:
Bug#33204-backport:
- Reversal of bugfix no 32858 for 5.1
- Application of bugfix no 32858 for 6.0
- Application of bugfix no 33204
memory
The server was doing a bad class typecast causing setting of
wrong value for the maximum number of items in an internal
structure used in equality propagation.
Fixed by not doing the wrong typecast and asserting the type
of the Item where it should be done.
values
We should re-set the access method functions when changing the access
method when switching to another index to avoid sorting.
Fixed by doing a little re-engineering : encapsulating all the function
assignment into a special function and calling it when flipping the
indexes.
BUILD-CMAKE:
WL#5161 : Documentation on how to build with CMake on Unix/Windows
BUILD/Makefile.am:
Add new file
BUILD/autorun.sh:
WL#5161 : use choose_configure instead of autotools configure script
(choose configure will call cmake if cmake is available)
BUILD/choose_configure.sh:
WL#5161 : use choose_configure instead of autotools configure script
(choose configure will call cmake if cmake is available)
CMakeLists.txt:
WL#5161 : Rewrite top-level CMakeLists.txt.
Remove Windows specifics
- compiler flags handling moved to configure.cmake
- storage engine/plugin stuff moved into cmake/plugin.cmake
- copy docs
Makefile.am:
Added new files
client/CMakeLists.txt:
WL#5161 : Rewrite CMakeLists.txt to be platform-independent
Handle packagng (add INSTALL commands)
cmake/Makefile.am:
WL#5161 : use choose_configure instead of autotools configure script
(choose configure will call cmake if cmake is available)
cmake/abi_check.cmake:
Custom targets for abi_check (for cmake)
cmake/bison.cmake:
- Check bison availability
- Add RUN_BISON macro (used to create sql_yacc.cc and sql_yacc.h)
cmake/cat.cmake:
Add helper script to concatenate files.
cmake/character_sets.cmake:
Handle configuration parameters WITH_EXTRA_CHARSETS
cmake/check_minimal_version.cmake:
Helper script to check the minimum required version of cmake
cmake/configure.pl:
Add perl script to convert ./configure parameters for cmake
cmake/create_initial_db.cmake.in:
Add script helper to create initial database.
(on Windows, we pack initial db with the redistribution
package)
cmake/do_abi_check.cmake:
Perform abi check
cmake/dtrace.cmake:
Handle dtrace in CMake Build.
Check for dtrace availablility,
run dtrace -G on solaris in prelink step
cmake/dtrace_prelink.cmake:
Run dtrace -G on Solaris in pre-link step,
link the object it creates together with library or
executable
cmake/install_macros.cmake:
Helper macros for packaging
(install pdb on Windows, install symlinks on Unix)
cmake/make_dist.cmake.in:
"make dist" -
- pack autotools ./configure script with the source
(renamed to configure.am)
- pack bison output
cmake/merge_archives_unix.cmake.in:
script to merge static libraries on Unix
cmake/misc.cmake:
Build helper macros
- MERGE_STATIC_LIBS
We use it when building client library and embedded
(avoid recompilation)
- Convert source file paths to absolute names.
We use it in to locate files of a different project,
when the files need to be recompiled (e.g in embedded
several storage engines are recompiled with
-DEMBEDDED_LIBRARY)
cmake/mysql_version.cmake:
Extract version info from configure.in
Handle package names.
cmake/plugin.cmake:
Rewrote storage/mysql_storage_engine.cmake to handle
other types of plugins and do it in OS-independent manner.
cmake/readline.cmake:
Macros to handle WITH_READLINE/WITH_LIBEDIT parameters
cmake/ssl.cmake:
Add macros to handle WITH_SSL parameter.
cmake/stack_direction.c:
Helper to check stack direction.
cmake/zlib.cmake:
Add macros to handle WITH_ZLIB parameter
cmd-line-utils/libedit/CMakeLists.txt:
Build libedit with cmake.
cmd-line-utils/libedit/Makefile.am:
Add new file
cmd-line-utils/readline/CMakeLists.txt:
Build readline with CMake.
cmd-line-utils/readline/Makefile.am:
Add new file
config.h.cmake:
WL#5161 : Add config.h template for cmake
configure.cmake:
WL#5161 : Add platform tests ( for cmake)
configure.in:
Added new subdirectories
dbug/CMakeLists.txt:
WL#5161
extra/CMakeLists.txt:
WL#5161
extra/yassl/CMakeLists.txt:
WL#5161
extra/yassl/taocrypt/CMakeLists.txt:
WL#5161
include/Makefile.am:
Add new file
include/keycache.h:
remove configure-win.h and remove HUGE_PTR defined there.
include/my_global.h:
use my_config.h for Windows, not config-win.h anymore
include/my_pthread.h:
- Move thread_safe_increment from config-win.h to other headers
(config-win.h is not used anymore)
- Declare pthread_cancel on Windows (it is used in daemon_example)
include/my_sys.h:
Add malloc.h on Windows (we use -D_WIN32_LEAN_AND_MEAN now, and
with this define malloc.h is not included automatically via windows.h)
include/mysql/plugin.h:
Handle pure-C plugins with Microsoft compiler.
include/thr_alarm.h:
remove rf_SetTimer that used to be defined in config-win.h
Replace with UINT_PTR (we do not use config-win.h anymore
and typedef was needed in this single place only)
libmysql/CMakeLists.txt:
Avoid pointless recompilation of source files
in client library if possible. Merge static
libs (dbug, mysys) to create static client
library.
libmysqld/CMakeLists.txt:
Avoid pointless recompilation of source files
when building embedded. Instead, merge dbug and
mysys (and some other static libs) into embedded.
libmysqld/examples/CMakeLists.txt:
Embedded compilation on Unix
libmysqld/lib_sql.cc:
Do not define THD::clear_error() in lib_sql.cc
for embedded. Instead, use the same inline
definition from sql_class.h as in none-embedded
case (fixes duplicate symbol errors on Windows
and removes pointless #ifdef EMBEDDED)
man/CMakeLists.txt:
Install man files.
man/Makefile.am:
Add new file.
mysql-test/CMakeLists.txt:
Install mysql-test files
mysql-test/Makefile.am:
Add new files
mysql-test/lib/My/ConfigFactory.pm:
Allow testing with mtr in out-of-source builds.
mysql-test/lib/My/Find.pm:
the build configurations are now also available on Unix
Xcode on Mac uses the Release, RelwithDebinfo and Debug
subdirectories for executables. Earlier, build configurations
were available only on Windows.
mysql-test/lib/My/SafeProcess.pm:
Allow testing with mtr in out-of-source builds.
mysql-test/lib/My/SafeProcess/CMakeLists.txt:
Port CMakeLists.txt to Unix
mysql-test/lib/My/SafeProcess/safe_kill_win.cc:
add stdlib.h (to be able to compile with -DWIN32_LEAN_AND_MEAN)
mysql-test/lib/My/SafeProcess/safe_process_win.cc:
Add stdlib.h (to be able to compile with -DWIN32_LEAN_AND_MEAN)
define JOB_OBJECT_LIMIT_KILL_ON_JOB_CLOSE if not defined
(can happen using MinGW compiler that comes with old SDK)
mysql-test/mtr.out-of-source:
Allow testing with mtr in out-of-source builds.
mysql-test/mysql-test-run.pl:
Allow testing with mtr in out-of-source builds.
Use common find_plugin macro for Windows and unix.
mysql-test/t/fulltext_plugin.test:
This test can now run on Windows as well.
mysys/CMakeLists.txt:
Port CMakeLists.txt to Unix
mysys/my_create.c:
config-win.h is dead => NO_OPEN_3 is never defined.
mysys/my_getsystime.c:
config-win.h is dead => define OFFSET_TO_EPOCH where it is used.
mysys/my_winthread.c:
Add win32 pthread_cancel - used by daemon_example
mysys/mysys_priv.h:
config-win.h is dead => include <sys/stat.h> where it is used
fix prototype of my_win_(f)stat
plugin/daemon_example/CMakeLists.txt:
Compile daemon_example with CMake
plugin/daemon_example/Makefile.am:
Add new file
plugin/fulltext/CMakeLists.txt:
Compile full-text example with CMake
plugin/fulltext/Makefile.am:
Add new file.
plugin/semisync/CMakeLists.txt:
Fix semisync to use common macro for plugins.
regex/CMakeLists.txt:
Use absolute filenames, when adding regex library
(we recompile files in embedded, and want to locate
sources via GET_TARGET_PROPERTY( ... SOURCES ..))
regex/regex2.h:
Remove pointless typedef (produces error with MinGW compiler)
scripts/CMakeLists.txt:
Add configure/install for scripts
sql-bench/CMakeLists.txt:
install sql-bench files
sql-bench/Makefile.am:
Add new file
sql/CMakeLists.txt:
Port CmakeLists.txt to Unix
sql/nt_servc.cc:
compile server with -DWIN32_LEAN_AND_MEAN
sql/share/CMakeLists.txt:
Install charsets
sql/share/Makefile.am:
Add new file
sql/sql_builtin.cc.in:
Handle pure-C plugins on Windows.
sql/sql_class.h:
Use the same clear_error macro in embedded and not embedded.
Fixes pointless #ifdef and avoids duplicate symbols when linking
on Windows.
storage/Makefile.am:
storage/mysql_storage_engine.cmake => cmake/plugin.cmake
storage/archive/CMakeLists.txt:
Add names for static and dynamic plugin libraries.
Link archive with zlib
storage/blackhole/CMakeLists.txt:
Add names for static and dynamic storage
engine libraries
storage/csv/CMakeLists.txt:
Add names for static and dynamic storage engine
libraries
storage/example/CMakeLists.txt:
Add names for static and dynamic storage engine
libraries
storage/federated/CMakeLists.txt:
Add names for static and dynamic storage engine
libraries
storage/heap/CMakeLists.txt:
Add names for static and dynamic storage engine
libraries
storage/ibmdb2i/CMakeLists.txt:
Better port for ibmdb2i plugin
storage/innobase/CMakeLists.txt:
Run system checks.
Add names for static and dynamic storage engine
libraries.
storage/innobase/include/page0page.ic:
Fix compile error on OpenSolaris.
storage/myisam/CMakeLists.txt:
Port CmakeLists.txt to Unix
storage/myisammrg/CMakeLists.txt:
Add names for static and dynamic storage engine
libraries
storage/mysql_storage_engine.cmake:
storage/mysql_storage_engine.cmake => cmake/plugin.cmake
support-files/CMakeLists.txt:
Configure and install some files from support-files.
support-files/Makefile.am:
Add new file
tests/CMakeLists.txt:
In general case, mysqlclient library can be dependent
on C++ runtime(if it includes yassl and is not compiled
with gcc or MSVC)
unittest/mysys/CMakeLists.txt:
Add unit tests
unittest/mysys/Makefile.am:
Add new file
unittest/mytap/CMakeLists.txt:
Add library for unit tests
unittest/mytap/Makefile.am:
Add new file
unittest/mytap/tap.c:
fix function definitions to match declarations
win/create_def_file.js:
Fix link error with intel compiler (icl
defines of special label for exception handler)
# Bug#24690 Stored functions: RETURNing UTF8 strings
# do not return UTF8_UNICODE_CI collation
#
# Bug#17903: cast to char results in binary
# Regression. The character set was not being properly initialized
# for CAST() with a type like CHAR(2) BINARY, which resulted in
# incorrect results or even a server crash.
#
Backporting from mysql-6.0-codebase.
mysql-test/r/sp-ucs2.result:
mysql-test/t/sp-ucs2.test:
Adding tests
sql/mysql_priv.h:
Adding prototype
sql/sp.cc
Remember COLLATE clause for non-default collations
sql/sql_parse.cc
Adding a new helper function
sql/sql_yacc.yy
- Allow "CHARACTER SET cs COLLATE cl" in
SP parameters, RETURNS, DECLARE
- Minor reorganization for "ASCII" and "UNICODE"
related rules, to make the code more readable,
also to allow these aliases:
* "VARCHAR(10) ASCII BINARY" -> CHARACTER SET latin1 COLLATE latin1_bin
* "VARCHAR(10) BINARY ASCII" -> CHARACTER SET latin1 COLLATE latin1_bin
* "VARCHAR(10) UNICODE BINARY" -> CHARACTER SET ucs2 COLLATE ucs2_bin
* "VARCHAR(10) BINARY UNICODE" -> CHARACTER SET ucs2 COLLATE ucs2_bin
Previously these four aliases returned the error
"This version of MySQL does not yet support return value collation".
Note:
This patch allows "VARCHAR(10) CHARACTER SET cs COLLATE cl"
and the above four aliases.
"VARCHAR(10) COLLATE cl" is still not allowed
i.e. when COLLATE is given without CHARACTER SET.
If we want to support this, we need an architecture decision
which character set to use by default.
Bug when setting up default partitioning,
used an uninitialized variabe.
mysql-test/r/partition.result:
Bug#48276: can't add column if subpartition exists
Added result
mysql-test/t/partition.test:
Bug#48276: can't add column if subpartition exists
Added test
sql/sql_partition.cc:
Bug#48276: can't add column if subpartition exists
even if is_create_table_ind was set, one tried to set no_subparts
with the unitialized no_parts local variable.
Fixed by rearrange the code to be to only execute
the statements when is_create_table_ind was not set.
only const tables
The problem was caused by two shortcuts in the optimizer that
are inapplicable in the ROLLUP case.
Normally in a case when only const tables are involved in a
query, DISTINCT clause can be safely optimized away since there
may be only one row produced by the join. Similarly, we don't
need to create a temporary table to resolve DISTINCT/GROUP
BY/ORDER BY. Both of these are inapplicable when the WITH
ROLLUP modifier is present.
Fixed by disabling the said optimizations for the WITH ROLLUP
case.
mysql-test/r/olap.result:
Added a test case for bug #48475.
mysql-test/t/olap.test:
Added a test case for bug #48475.
sql/sql_select.cc:
Disabled const-only table optimizations for the WITH ROLLUP
case.
