which implemented new type-of-operation-aware metadata
locks and added a wait-for graph based deadlock detector
to the MDL subsystem (this patch fixed bug #46272 "MySQL
5.4.4, new MDL: unnecessary deadlock" and bug #37346
"innodb does not detect deadlock between update and alter
table").
These hangs were caused by missing include of
wait_condition.inc. This fix simply adds them.
mysql-test/t/mdl_sync.test:
Added missing include of wait_condition.inc.
There was two problems:
The first was the symptom, caused by bad error handling in
ha_partition. It did not handle print_error etc. when
having no partitions (when used by dummy handler).
The second was the real problem that when dropping tables
it reused the table type (storage engine) from when the lock
was asked for, not the table type that it had when gaining
the exclusive name lock. So that it tried to delete tables
from wrong storage engines.
Solutions for the first problem was to accept some handler
calls to the partitioning handler even if it was not setup
with any partitions, and also if possible fallback
to use the base handler's default functions.
Solution for the second problem was to remove the optimization
to reuse the definition from the cache, instead always check
the frm-file when holding the LOCK_open mutex
(updated with a fix for a debug print crash and better
comments as required by reviewer, and removed optimization
to avoid reading the frm-file).
mysql-test/r/partition_debug_sync.result:
Bug#42438: Crash ha_partition::change_table_ptr
New result file using DEBUG_SYNC for deterministic results.
mysql-test/t/partition_debug_sync.test:
Bug#42438: Crash ha_partition::change_table_ptr
New test file using DEBUG_SYNC for deterministic results.
sql/ha_partition.cc:
Bug#42438: Crash ha_partition::change_table_ptr
allow some handler calls, used by error handling, even when
no partitions are setup. Fallback to default handling if possible.
sql/sql_base.cc:
Bug#42438: Crash ha_partition::change_table_ptr
Added DEBUG_SYNC point for deterministic test cases.
sql/sql_table.cc:
Bug#42438: Crash ha_partition::change_table_ptr
Always use the table type written in the .frm-file
(i.e. the current table type) when deleting a table.
Moved the check for log-table to not depend of the cache.
Added DEBUG_SYNC points for deterministic test cases.
Add a wait-for graph based deadlock detector to the
MDL subsystem.
Fixes bug #46272 "MySQL 5.4.4, new MDL: unnecessary deadlock" and
bug #37346 "innodb does not detect deadlock between update and
alter table".
The first bug manifested itself as an unwarranted abort of a
transaction with ER_LOCK_DEADLOCK error by a concurrent ALTER
statement, when this transaction tried to repeat use of a
table, which it has already used in a similar fashion before
ALTER started.
The second bug showed up as a deadlock between table-level
locks and InnoDB row locks, which was "detected" only after
innodb_lock_wait_timeout timeout.
A transaction would start using the table and modify a few
rows.
Then ALTER TABLE would come in, and start copying rows
into a temporary table. Eventually it would stumble on
the modified records and get blocked on a row lock.
The first transaction would try to do more updates, and get
blocked on thr_lock.c lock.
This situation of circular wait would only get resolved
by a timeout.
Both these bugs stemmed from inadequate solutions to the
problem of deadlocks occurring between different
locking subsystems.
In the first case we tried to avoid deadlocks between metadata
locking and table-level locking subsystems, when upgrading shared
metadata lock to exclusive one.
Transactions holding the shared lock on the table and waiting for
some table-level lock used to be aborted too aggressively.
We also allowed ALTER TABLE to start in presence of transactions
that modify the subject table. ALTER TABLE acquires
TL_WRITE_ALLOW_READ lock at start, and that block all writes
against the table (naturally, we don't want any writes to be lost
when switching the old and the new table). TL_WRITE_ALLOW_READ
lock, in turn, would block the started transaction on thr_lock.c
lock, should they do more updates. This, again, lead to the need
to abort such transactions.
The second bug occurred simply because we didn't have any
mechanism to detect deadlocks between the table-level locks
in thr_lock.c and row-level locks in InnoDB, other than
innodb_lock_wait_timeout.
This patch solves both these problems by moving lock conflicts
which are causing these deadlocks into the metadata locking
subsystem, thus making it possible to avoid or detect such
deadlocks inside MDL.
To do this we introduce new type-of-operation-aware metadata
locks, which allow MDL subsystem to know not only the fact that
transaction has used or is going to use some object but also what
kind of operation it has carried out or going to carry out on the
object.
This, along with the addition of a special kind of upgradable
metadata lock, allows ALTER TABLE to wait until all
transactions which has updated the table to go away.
This solves the second issue.
Another special type of upgradable metadata lock is acquired
by LOCK TABLE WRITE. This second lock type allows to solve the
first issue, since abortion of table-level locks in event of
DDL under LOCK TABLES becomes also unnecessary.
Below follows the list of incompatible changes introduced by
this patch:
- From now on, ALTER TABLE and CREATE/DROP TRIGGER SQL (i.e. those
statements that acquire TL_WRITE_ALLOW_READ lock)
wait for all transactions which has *updated* the table to
complete.
- From now on, LOCK TABLES ... WRITE, REPAIR/OPTIMIZE TABLE
(i.e. all statements which acquire TL_WRITE table-level lock) wait
for all transaction which *updated or read* from the table
to complete.
As a consequence, innodb_table_locks=0 option no longer applies
to LOCK TABLES ... WRITE.
- DROP DATABASE, DROP TABLE, RENAME TABLE no longer abort
statements or transactions which use tables being dropped or
renamed, and instead wait for these transactions to complete.
- Since LOCK TABLES WRITE now takes a special metadata lock,
not compatible with with reads or writes against the subject table
and transaction-wide, thr_lock.c deadlock avoidance algorithm
that used to ensure absence of deadlocks between LOCK TABLES
WRITE and other statements is no longer sufficient, even for
MyISAM. The wait-for graph based deadlock detector of MDL
subsystem may sometimes be necessary and is involved. This may
lead to ER_LOCK_DEADLOCK error produced for multi-statement
transactions even if these only use MyISAM:
session 1: session 2:
begin;
update t1 ... lock table t2 write, t1 write;
-- gets a lock on t2, blocks on t1
update t2 ...
(ER_LOCK_DEADLOCK)
- Finally, support of LOW_PRIORITY option for LOCK TABLES ... WRITE
was abandoned.
LOCK TABLE ... LOW_PRIORITY WRITE from now on has the same
priority as the usual LOCK TABLE ... WRITE.
SELECT HIGH PRIORITY no longer trumps LOCK TABLE ... WRITE in
the wait queue.
- We do not take upgradable metadata locks on implicitly
locked tables. So if one has, say, a view v1 that uses
table t1, and issues:
LOCK TABLE v1 WRITE;
FLUSH TABLE t1; -- (or just 'FLUSH TABLES'),
an error is produced.
In order to be able to perform DDL on a table under LOCK TABLES,
the table must be locked explicitly in the LOCK TABLES list.
mysql-test/include/handler.inc:
Adjusted test case to trigger an execution path on which bug 41110
"crash with handler command when used concurrently with alter
table" and bug 41112 "crash in mysql_ha_close_table/get_lock_data
with alter table" were originally discovered. Left old test case
which no longer triggers this execution path for the sake of
coverage.
Added test coverage for HANDLER SQL statements and type-aware
metadata locks.
Added a test for the global shared lock and HANDLER SQL.
Updated tests to take into account that the old simple deadlock
detection heuristics was replaced with a graph-based deadlock
detector.
mysql-test/r/debug_sync.result:
Updated results (see debug_sync.test).
mysql-test/r/handler_innodb.result:
Updated results (see handler.inc test).
mysql-test/r/handler_myisam.result:
Updated results (see handler.inc test).
mysql-test/r/innodb-lock.result:
Updated results (see innodb-lock.test).
mysql-test/r/innodb_mysql_lock.result:
Updated results (see innodb_mysql_lock.test).
mysql-test/r/lock.result:
Updated results (see lock.test).
mysql-test/r/lock_multi.result:
Updated results (see lock_multi.test).
mysql-test/r/lock_sync.result:
Updated results (see lock_sync.test).
mysql-test/r/mdl_sync.result:
Updated results (see mdl_sync.test).
mysql-test/r/sp-threads.result:
SHOW PROCESSLIST output has changed due to the fact that waiting
for LOCK TABLES WRITE now happens within metadata locking
subsystem.
mysql-test/r/truncate_coverage.result:
Updated results (see truncate_coverage.test).
mysql-test/suite/funcs_1/datadict/processlist_val.inc:
SELECT FROM I_S.PROCESSLIST output has changed due to fact that
waiting for LOCK TABLES WRITE now happens within metadata locking
subsystem.
mysql-test/suite/funcs_1/r/processlist_val_no_prot.result:
SELECT FROM I_S.PROCESSLIST output has changed due to fact that
waiting for LOCK TABLES WRITE now happens within metadata locking
subsystem.
mysql-test/suite/rpl/t/rpl_sp.test:
Updated to a new SHOW PROCESSLIST state name.
mysql-test/t/debug_sync.test:
Use LOCK TABLES READ instead of LOCK TABLES WRITE as the latter
no longer allows to trigger execution path involving waiting on
thr_lock.c lock and therefore reaching debug sync-point covered
by this test.
mysql-test/t/innodb-lock.test:
Adjusted test case to the fact that innodb_table_locks=0 option is
no longer supported, since LOCK TABLES WRITE handles all its
conflicts within MDL subsystem.
mysql-test/t/innodb_mysql_lock.test:
Added test for bug #37346 "innodb does not detect deadlock between
update and alter table".
mysql-test/t/lock.test:
Added test coverage which checks the fact that we no longer support
DDL under LOCK TABLES on tables which were locked implicitly.
Adjusted existing test cases accordingly.
mysql-test/t/lock_multi.test:
Added test for bug #46272 "MySQL 5.4.4, new MDL: unnecessary
deadlock". Adjusted other test cases to take into account the
fact that waiting for LOCK TABLES ... WRITE now happens within MDL
subsystem.
mysql-test/t/lock_sync.test:
Since LOCK TABLES ... WRITE now takes SNRW metadata lock for
tables locked explicitly we have to implicitly lock InnoDB tables
(through view) to trigger the table-level lock conflict between
TL_WRITE and TL_WRITE_ALLOW_WRITE.
mysql-test/t/mdl_sync.test:
Added basic test coverage for type-of-operation-aware metadata
locks. Also covered with tests some use cases involving HANDLER
statements in which a deadlock could arise.
Adjusted existing tests to take type-of-operation-aware MDL into
account.
mysql-test/t/multi_update.test:
Update to a new SHOW PROCESSLIST state name.
mysql-test/t/truncate_coverage.test:
Adjusted test case after making LOCK TABLES WRITE to wait until
transactions that use the table to be locked are completed.
Updated to the changed name of DEBUG_SYNC point.
sql/handler.cc:
Global read lock functionality has been
moved into a class.
sql/lock.cc:
Global read lock functionality has been
moved into a class.
Updated code to use the new MDL API.
sql/mdl.cc:
Introduced new type-of-operation aware metadata locks.
To do this:
- Changed MDL_lock to use one list for waiting requests and one
list for granted requests. For each list, added a bitmap
that holds information what lock types a list contains.
Added a helper class MDL_lock::List to manipulate with granted
and waited lists while keeping the bitmaps in sync
with list contents.
- Changed lock-compatibility functions to use bitmaps that
define compatibility.
- Introduced a graph based deadlock detector inspired by
waiting_threads.c from Maria implementation.
- Now that we have a deadlock detector, and no longer have
a global lock to protect individual lock objects, but rather
use an rw lock per object, removed redundant code for upgrade,
and the global read lock. Changed the MDL API to
no longer require the caller to acquire the global
intention exclusive lock by means of a separate method.
Removed a few more methods that became redundant.
- Removed deadlock detection heuristic, it has been made
obsolete by the deadlock detector.
- With operation-type-aware metadata locks, MDL subsystem has
become aware of potential conflicts between DDL and open
transactions. This made it possible to remove calls to
mysql_abort_transactions_with_shared_lock() from acquisition
paths for exclusive lock and lock upgrade. Now we can simply
wait for these transactions to complete without fear of
deadlock. Function mysql_lock_abort() has also become
unnecessary for all conflicting cases except when a DDL
conflicts with a connection that has an open HANDLER.
sql/mdl.h:
Introduced new type-of-operation aware metadata locks.
Introduced a graph based deadlock detector and supporting
methods.
Added comments.
God rid of redundant API calls.
Renamed m_lt_or_ha_sentinel to m_trans_sentinel,
since now it guards the global read lock as well as
LOCK TABLES and HANDLER locks.
sql/mysql_priv.h:
Moved the global read lock functionality into a
class.
Added MYSQL_OPEN_FORCE_SHARED_MDL flag which forces
open_tables() to take MDL_SHARED on tables instead of
metadata locks specified in the parser. We use this to
allow PREPARE run concurrently in presence of
LOCK TABLES ... WRITE.
Added signature for find_table_for_mdl_ugprade().
sql/set_var.cc:
Global read lock functionality has been
moved into a class.
sql/sp_head.cc:
When creating TABLE_LIST elements for prelocking or
system tables set the type of request for metadata
lock according to the operation that will be performed
on the table.
sql/sql_base.cc:
- Updated code to use the new MDL API.
- In order to avoid locks starvation we take upgradable
locks all at once. As result implicitly locked tables no
longer get an upgradable lock. Consequently DDL and FLUSH
TABLES for such tables is prohibited.
find_write_locked_table() was replaced by
find_table_for_mdl_upgrade() function.
open_table() was adjusted to return TABLE instance with
upgradable ticket when necessary.
- We no longer wait for all locks on OT_WAIT back off
action -- only on the lock that caused the wait
conflict. Moreover, now we distinguish cases when we
have to wait due to conflict in MDL and old version
of table in TDC.
- Upate mysql_notify_threads_having_share_locks()
to only abort thr_lock.c waits of threads that
have open HANDLERs, since lock conflicts with only
these threads now can lead to deadlocks not detectable
by the MDL deadlock detector.
- Remove mysql_abort_transactions_with_shared_locks()
which is no longer needed.
sql/sql_class.cc:
Global read lock functionality has been moved into a class.
Re-arranged code in THD::cleanup() to simplify assert.
sql/sql_class.h:
Introduced class to incapsulate global read lock
functionality.
Now sentinel in MDL subsystem guards the global read lock
as well as LOCK TABLES and HANDLER locks. Adjusted code
accordingly.
sql/sql_db.cc:
Global read lock functionality has been moved into a class.
sql/sql_delete.cc:
We no longer acquire upgradable metadata locks on tables
which are locked by LOCK TABLES implicitly. As result
TRUNCATE TABLE is no longer allowed for such tables.
Updated code to use the new MDL API.
sql/sql_handler.cc:
Inform MDL_context about presence of open HANDLERs.
Since HANLDERs break MDL protocol by acquiring table-level
lock while holding only S metadata lock on a table MDL
subsystem should take special care about such contexts (Now
this is the only case when mysql_lock_abort() is used).
sql/sql_parse.cc:
Global read lock functionality has been moved into a class.
Do not take upgradable metadata locks when opening tables
for CREATE TABLE SELECT as it is not necessary and limits
concurrency.
When initializing TABLE_LIST objects before adding them
to the table list set the type of request for metadata lock
according to the operation that will be performed on the
table.
We no longer acquire upgradable metadata locks on tables
which are locked by LOCK TABLES implicitly. As result FLUSH
TABLES is no longer allowed for such tables.
sql/sql_prepare.cc:
Use MYSQL_OPEN_FORCE_SHARED_MDL flag when opening
tables during PREPARE. This allows PREPARE to run
concurrently in presence of LOCK TABLES ... WRITE.
sql/sql_rename.cc:
Global read lock functionality has been moved into a class.
sql/sql_show.cc:
Updated code to use the new MDL API.
sql/sql_table.cc:
Global read lock functionality has been moved into a class.
We no longer acquire upgradable metadata locks on tables
which are locked by LOCK TABLES implicitly. As result DROP
TABLE is no longer allowed for such tables.
Updated code to use the new MDL API.
sql/sql_trigger.cc:
Global read lock functionality has been moved into a class.
We no longer acquire upgradable metadata locks on tables
which are locked by LOCK TABLES implicitly. As result
CREATE/DROP TRIGGER is no longer allowed for such tables.
Updated code to use the new MDL API.
sql/sql_view.cc:
Global read lock functionality has been moved into a class.
Fixed results of wrong merge that led to misuse of GLR API.
CREATE VIEW statement is not a commit statement.
sql/table.cc:
When resetting TABLE_LIST objects for PS or SP re-execution
set the type of request for metadata lock according to the
operation that will be performed on the table. Do the same
in auxiliary function initializing metadata lock requests
in a table list.
sql/table.h:
When initializing TABLE_LIST objects set the type of request
for metadata lock according to the operation that will be
performed on the table.
sql/transaction.cc:
Global read lock functionality has been moved into a class.
Fixed 2 problems :
1. test_if_order_by_key() was continuing on the primary key
as if it has a primary key suffix (as the secondary keys do).
This leads to crashes in ORDER BY <pk>,<pk>.
Fixed by not treating the primary key as the secondary one
and not depending on it being clustered with a primary key.
2. The cost calculation was trying to read the records
per key when operating on ORDER BYs that order on all of the
secondary key + some of the primary key.
This leads to crashes because of out-of-bounds array access.
Fixed by assuming we'll find 1 record per key in such cases.
column is used for ORDER BY
Problem: filesort isn't meant for null length sort data
(e.g. char(0)), that leads to a server crash.
Fix: disregard sort order if sort data record length is 0 (nothing
to sort).
mysql-test/r/select.result:
Fix for bug#49897: crash in ptr_compare when char(0) NOT NULL
column is used for ORDER BY
- test result.
mysql-test/t/select.test:
Fix for bug#49897: crash in ptr_compare when char(0) NOT NULL
column is used for ORDER BY
- test case.
sql/filesort.cc:
Fix for bug#49897: crash in ptr_compare when char(0) NOT NULL
column is used for ORDER BY
- assert added as filesort cannot handle null length sort data.
sql/sql_select.cc:
Fix for bug#49897: crash in ptr_compare when char(0) NOT NULL
column is used for ORDER BY
- don't sort null length data e.g. in case of ORDER BY CHAR(0).
The problem was that a DROP TRIGGER statement inside a stored
procedure could cause a crash in subsequent invocations. This
was due to the addition, on the first execution, of a temporary
table reference to the stored procedure query table list. In
a subsequent invocation, there would be a attempt to reinitialize
the temporary table reference, which by then was already gone.
The solution is to backup and reset the query table list each
time a trigger needs to be dropped. This ensures that any temp
changes to the query table list are discarded. It is safe to
do so at this time as drop trigger is restricted from more
complicated scenarios (ie, not allowed within stored functions,
etc).
mysql-test/r/sp-bugs.result:
Add test case result for Bug#50423
mysql-test/t/sp-bugs.test:
Add test case for Bug#50423
sql/sql_trigger.cc:
Backup and reset the query table list.
Remove now unnecessary manual reset of the query table list.
Server crashes when accessing ARCHIVE table with missing
.ARZ file.
When opening a table, ARCHIVE didn't properly pass through
error code from lower level azopen() to higher level open()
method.
mysql-test/r/archive.result:
A test case for BUG#48757.
mysql-test/t/archive.test:
A test case for BUG#48757.
storage/archive/ha_archive.cc:
Pass through error code from azopen().
Bulk REPLACE or bulk INSERT ... ON DUPLICATE KEY UPDATE may
break dynamic record MyISAM table.
The problem is limited to bulk REPLACE and INSERT ... ON
DUPLICATE KEY UPDATE, because only these operations may
be done via UPDATE internally and may request write cache.
When flushing write cache, MyISAM may write remaining
cached data at wrong position. Fixed by requesting write
cache to seek to a correct position.
mysql-test/r/myisam.result:
A test case for BUG#49628.
mysql-test/t/myisam.test:
A test case for BUG#49628.
storage/myisam/mi_dynrec.c:
delete_dynamic_record() may change data file position.
IO cache must be notified as it may still have cached
data, which has to be flushed later.
table and view...
Invalid memory reads after a query referencing MyISAM table
multiple times with write lock. Invalid memory reads may
lead to server crash, valgrind warnings, incorrect values
in INFORMATION_SCHEMA.TABLES.{TABLE_ROWS, DATA_LENGTH,
INDEX_LENGTH, ...}.
This may happen when one of the table instances gets closed
after a query, e.g. out of slots in open tables cache. UNION,
MERGE and VIEW are irrelevant.
The problem was that MyISAM didn't restore state info
pointer to default value.
myisam/mi_locking.c:
When a query is referencing MyISAM table multiple times
with a write lock, all table instances share the same
state info, pointing to MI_INFO::save_state of
"primary" table instance.
When lock is released, state pointer was restored only
for the primary table instance. Secondary table instances
are still pointing to save_state of primary table
instance.
Primary table instance may get closed, leaving secondary
table instances state pointer pointing to freed memory.
That's mostly ok, since next lock will update state info
pointer to correct value. But there're some cases, when
this secondary table instance state info is accessed
without a lock, e.g. INFORMATION_SCHEMA, MERGE (in 5.1
and up), MyISAM itself for DBUG purposes.
Restore default value of state pointer unconditionally,
for both primary and secondary table instances.
mysql-test/r/myisam.result:
A test case for BUG#48438.
mysql-test/t/myisam.test:
A test case for BUG#48438.
In case of 'CREATE VIEW' subselect transformation does not happen(see JOIN::prepare).
During fix_fields Item_row may call is_null() method for its arugmens which
leads to item calculation(wrong subselect in our case as
transformation did not happen before). This is_null() call
does not make sence for 'CREATE VIEW'.
Note:
Only Item_row is affected because other items don't call is_null()
during fix_fields() for arguments.
mysql-test/r/view.result:
test case
mysql-test/t/view.test:
test case
sql/item_row.cc:
skip is_null() call in case of 'CREATE VIEW' as unnecessary.
SHOW CREATE TABLE on a view (v1) that contains a function whose
statement uses another view (v2), could trigger a infinite loop
if the view referenced within the function causes a warning to
be raised while opening the said view (v2).
The problem was a infinite loop over the stack of internal error
handlers. The problem would be triggered if the stack contained
two or more handlers and the first two handlers didn't handle the
raised condition. In this case, the loop variable would always
point to the second handler in the stack.
The solution is to correct the loop variable assignment so that
the loop is able to iterate over all handlers in the stack.
mysql-test/r/view.result:
Add test case result for Bug#48449.
mysql-test/std_data/bug48449.frm:
Add a incomplete view definition that causes a warning to be
issued.
mysql-test/t/view.test:
Add test case for Bug#48449
sql/sql_class.cc:
Iterate over all handlers in the stack.
in multitable delete/subquery
SQL_BUFFER_RESULT should not have an effect on non-SELECT
statements according to our documentation.
Fixed by not passing it through to multi-table DELETE (similarly
to how it's done for multi-table UPDATE).
The problem was that a failure to open a view wasn't being
properly handled. When opening a view with unknown definer,
the open procedure would be treated as successful and would
later crash when attempting to lock the view (which wasn't
opened to begin with).
The solution is to skip further processing when opening a
table if it fails with a fatal error.
mysql-test/r/view.result:
Add test case result for Bug#47734.
mysql-test/t/view.test:
Add test case for Bug#47734.
sql/sql_base.cc:
Skip further processing if opening a table failed due to
a fatal error (for the statement).
error causes debug assertion
The IGNORE option of the multiple-table UPDATE command was
not intended to suppress errors caused by the
sql_safe_updates mode. This flag will raise an error if the
execution of UPDATE does not use a key for row retrieval,
and should continue do so regardless of the IGNORE option.
However the implementation of IGNORE does not support
exceptions to the rule; it always converts errors to
warnings and cannot be extended. The Internal_error_handler
interface offers the infrastructure to handle individual
errors, making sure that the error raised by
sql_safe_updates is not silenced.
Fixed by implementing an Internal_error_handler and using it
for UPDATE IGNORE commands.
Detailed revision comments:
r6471 | calvin | 2010-01-16 01:43:27 +0200 (Sat, 16 Jan 2010) | 4 lines
branches/5.1: fix bug#49396: main.innodb test fails in embedded mode
Change replace_result by using $MYSQLD_DATADIR. Tested in both embedded
mode and normal server mode.
Detailed revision comments:
r6492 | sunny | 2010-01-21 09:38:35 +0200 (Thu, 21 Jan 2010) | 1 line
branches/5.1: Add reference to bug#47621 in the comment.
Detailed revision comments:
r6489 | sunny | 2010-01-21 02:57:50 +0200 (Thu, 21 Jan 2010) | 2 lines
branches/5.1: Factor out test for bug#44030 from innodb-autoinc.test
into a separate test/result files.
Detailed revision comments:
r6488 | sunny | 2010-01-21 02:55:08 +0200 (Thu, 21 Jan 2010) | 2 lines
branches/5.1: Factor out test for bug#44030 from innodb-autoinc.test
into a separate test/result files.
condition variable per context instead of one mutex and one conditional
variable for the whole subsystem.
This should increase concurrency in this subsystem.
It also opens the way for further changes which are necessary to solve
such bugs as bug #46272 "MySQL 5.4.4, new MDL: unnecessary deadlock"
and bug #37346 "innodb does not detect deadlock between update and alter
table".
Two other notable changes done by this patch:
- MDL subsystem no longer implicitly acquires global intention exclusive
metadata lock when per-object metadata lock is acquired. Now this has
to be done by explicit calls outside of MDL subsystem.
- Instead of using separate MDL_context for opening system tables/tables
for purposes of I_S we now create MDL savepoint in the main context
before opening tables and rollback to this savepoint after closing
them. This means that it is now possible to get ER_LOCK_DEADLOCK error
even not inside a transaction. This might happen in unlikely case when
one runs DDL on one of system tables while also running DDL on some
other tables. Cases when this ER_LOCK_DEADLOCK error is not justified
will be addressed by advanced deadlock detector for MDL subsystem which
we plan to implement.
mysql-test/include/handler.inc:
Adjusted handler_myisam.test and handler_innodb.test to the fact that
exclusive metadata locks on tables are now acquired according to
alphabetical order of fully qualified table names instead of order
in which tables are mentioned in statement.
mysql-test/r/handler_innodb.result:
Adjusted handler_myisam.test and handler_innodb.test to the fact that
exclusive metadata locks on tables are now acquired according to
alphabetical order of fully qualified table names instead of order
in which tables are mentioned in statement.
mysql-test/r/handler_myisam.result:
Adjusted handler_myisam.test and handler_innodb.test to the fact that
exclusive metadata locks on tables are now acquired according to
alphabetical order of fully qualified table names instead of order
in which tables are mentioned in statement.
mysql-test/r/mdl_sync.result:
Adjusted mdl_sync.test to the fact that exclusive metadata locks on
tables are now acquired according to alphabetical order of fully
qualified table names instead of order in which tables are mentioned
in statement.
mysql-test/t/mdl_sync.test:
Adjusted mdl_sync.test to the fact that exclusive metadata locks on
tables are now acquired according to alphabetical order of fully
qualified table names instead of order in which tables are mentioned
in statement.
sql/events.cc:
Instead of using separate MDL_context for opening system tables we now
create MDL savepoint in the main context before opening such tables
and rollback to this savepoint after closing them. To support this
change methods of THD responsible for saving/restoring open table
state were changed to use Open_tables_backup class which in addition
to Open_table_state has a member for this savepoint. As result code
opening/closing system tables was changed to use Open_tables_backup
instead of Open_table_state class as well.
sql/ha_ndbcluster.cc:
Since manipulations with open table state no longer install proxy
MDL_context it does not make sense to perform them in order to
satisfy assert in mysql_rm_tables_part2(). Removed them per agreement
with Cluster team. This has not broken test suite since scenario in
which deadlock can occur and assertion fails is not covered by tests.
sql/lock.cc:
MDL subsystem no longer implicitly acquires global intention exclusive
metadata lock when per-object exclusive metadata lock is acquired.
Now this has to be done by explicit calls outside of MDL subsystem.
sql/log.cc:
Instead of using separate MDL_context for opening system tables we now
create MDL savepoint in the main context before opening such tables
and rollback to this savepoint after closing them. To support this
change methods of THD responsible for saving/restoring open table
state were changed to use Open_tables_backup class which in addition
to Open_table_state has a member for this savepoint. As result code
opening/closing system tables was changed to use Open_tables_backup
instead of Open_table_state class as well.
sql/mdl.cc:
Changed metadata locking subsystem to use mutex per lock and condition
variable per context instead of one mutex and one conditional variable
for the whole subsystem.
Changed approach to handling of global metadata locks. Instead of
implicitly acquiring intention exclusive locks when user requests
per-object upgradeable or exclusive locks now we require them to be
acquired explicitly in the same way as ordinary metadata locks.
In fact global lock are now ordinary metadata locks in new GLOBAL
namespace.
To implement these changes:
- Removed LOCK_mdl mutex and COND_mdl condition variable.
- Introduced MDL_lock::m_mutex mutexes which protect individual lock
objects.
- Replaced mdl_locks hash with MDL_map class, which has hash for
MDL_lock objects as a member and separate mutex which protects this
hash. Methods of this class allow to find(), find_or_create() or
remove() MDL_lock objects in concurrency-friendly fashion (i.e.
for most common operation, find_or_create(), we don't acquire
MDL_lock::m_mutex while holding MDL_map::m_mutex. Thanks to MikaelR
for this idea and benchmarks!). Added three auxiliary members to
MDL_lock class (m_is_destroyed, m_ref_usage, m_ref_release) to
support this concurrency-friendly behavior.
- Introduced MDL_context::m_ctx_wakeup_cond condition variable to be
used for waiting until this context's pending request can be
satisfied or its thread has to perform actions to resolve potential
deadlock. Context which want to wait add ticket corresponding to the
request to an appropriate queue of waiters in MDL_lock object so
they can be noticed when other contexts change state of lock and be
awaken by them by signalling on MDL_context::m_ctx_wakeup_cond.
As consequence MDL_ticket objects has to be used for any waiting
in metadata locking subsystem including one which happens in
MDL_context::wait_for_locks() method.
Another consequence is that MDL_context is no longer copyable and
can't be saved/restored when working with system tables.
- Made MDL_lock an abstract class, which delegates specifying exact
compatibility matrix to its descendants. Added MDL_global_lock child
class for global lock (The old is_lock_type_compatible() method
became can_grant_lock() method of this class). Added MDL_object_lock
class to represent per-object lock (The old MDL_lock::can_grant_lock()
became its method). Choice between two classes happens based on MDL
namespace in MDL_lock::create() method.
- Got rid of MDL_lock::type member as its meaning became ambigous for
global locks.
- To simplify waking up of contexts waiting for lock split waiting queue
in MDL_lock class in two queues. One for pending requests for exclusive
(including intention exclusive) locks and another for requests for
shared locks.
- Added virtual wake_up_waiters() method to MDL_lock, MDL_global_lock and
MDL_object_lock classes which allows to wake up waiting contexts after
state of lock changes. Replaced old duplicated code with calls to this
method.
- Adjusted MDL_context::try_acquire_shared_lock()/exclusive_lock()/
global_shared_lock(), MDL_ticket::upgrade_shared_lock_to_exclusive_lock()
and MDL_context::release_ticket() methods to use MDL_map and
MDL_lock::m_mutex instead of single LOCK_mdl mutex and wake up
waiters according to the approach described above. The latter method
also was renamed to MDL_context::release_lock().
- Changed MDL_context::try_acquire_shared_lock()/exclusive_lock() and
release_lock() not to handle global locks. They are now supposed to
be taken explicitly like ordinary metadata locks.
- Added helper MDL_context::try_acquire_global_intention_exclusive_lock()
and acquire_global_intention_exclusive_lock() methods.
- Moved common code from MDL_context::acquire_global_shared_lock() and
acquire_global_intention_exclusive_lock() to new method -
MDL_context::acquire_lock_impl().
- Moved common code from MDL_context::try_acquire_shared_lock(),
try_acquire_global_intention_exclusive_lock()/exclusive_lock()
to MDL_context::try_acquire_lock_impl().
- Since acquiring of several exclusive locks can no longer happen under
single LOCK_mdl mutex the approach to it had to be changed. Now we do
it in one by one fashion. This is done in alphabetical order to avoid
deadlocks. Changed MDL_context::acquire_exclusive_locks() accordingly
(as part of this change moved code responsible for acquiring single
exclusive lock to new MDL_context::acquire_exclusive_lock_impl()
method).
- Since we no longer have single LOCK_mdl mutex which protects all
MDL_context::m_is_waiting_in_mdl members using these members to
determine if we have really awaken context holding conflicting
shared lock became inconvinient. Got rid of this member and changed
notify_shared_lock() helper function and process of acquiring
of/upgrading to exclusive lock not to rely on such information.
Now in MDL_context::acquire_exclusive_lock_impl() and
MDL_ticket::upgrade_shared_lock_to_exclusive_lock() we simply
re-try to wake up threads holding conflicting shared locks after
small time out.
- Adjusted MDL_context::can_wait_lead_to_deadlock() and
MDL_ticket::has_pending_conflicting_lock() to use per-lock
mutexes instead of LOCK_mdl. To do this introduced
MDL_lock::has_pending_exclusive_lock() method.
sql/mdl.h:
Changed metadata locking subsystem to use mutex per lock and condition
variable per context instead of one mutex and one conditional variable
for the whole subsystem. In order to implement this change:
- Added MDL_key::cmp() method to be able to sort MDL_key objects
alphabetically. Changed length fields in MDL_key class to uint16
as 16-bit is enough for length of any key.
- Changed MDL_ticket::get_ctx() to return pointer to non-const
object in order to be able to use MDL_context::awake() method
for such contexts.
- Got rid of unlocked versions of can_wait_lead_to_deadlock()/
has_pending_conflicting_lock() methods in MDL_context and
MDL_ticket. We no longer has single mutex which protects all
locks. Thus one always has to use versions of these methods
which acquire per-lock mutexes.
- MDL_request_list type of list now counts its elements.
- Added MDL_context::m_ctx_wakeup_cond condition variable to be used
for waiting until this context's pending request can be satisfied
or its thread has to perform actions to resolve potential deadlock.
Added awake() method to wake up context from such wait.
Addition of condition variable made MDL_context uncopyable.
As result we no longer can save/restore MDL_context when working
with system tables. Instead we create MDL savepoint before opening
those tables and rollback to it once they are closed.
- MDL_context::release_ticket() became release_lock() method.
- Added auxiliary MDL_context::acquire_exclusive_lock_impl() method
which does all necessary work to acquire exclusive lock on one object
but should not be used directly as it does not enforce any asserts
ensuring that no deadlocks are possible.
- Since we no longer need to know if thread trying to acquire exclusive
lock managed to wake up any threads having conflicting shared locks
(as, anyway, we will try to wake up such threads again shortly)
- MDL_context::m_is_waiting_in_mdl member became unnecessary and
notify_shared_lock() no longer needs to be friend of MDL_context.
Changed approach to handling of global metadata locks. Instead of
implicitly acquiring intention exclusive locks when user requests
per-object upgradeable or exclusive locks now we require them to be
acquired explicitly in the same way as ordinary metadata locks.
- Added new GLOBAL namespace for such locks.
- Added new type of lock to be requested MDL_INTENTION_EXCLISIVE.
- Added MDL_context::try_acquire_global_intention_exclusive_lock()
and acquire_global_intention_exclusive_lock() methods.
- Moved common code from MDL_context::acquire_global_shared_lock()
and acquire_global_intention_exclusive_lock() to new method -
MDL_context::acquire_lock_impl().
- Moved common code from MDL_context::try_acquire_shared_lock(),
try_acquire_global_intention_exclusive_lock()/exclusive_lock()
to MDL_context::try_acquire_lock_impl().
- Added helper MDL_context::is_global_lock_owner() method to be
able easily to find what kind of global lock this context holds.
- MDL_context::m_has_global_shared_lock became unnecessary as
global read lock is now represented by ordinary ticket.
- Removed assert in MDL_context::set_lt_or_ha_sentinel() which became
false for cases when we execute LOCK TABLES under global read lock
mode.
sql/mysql_priv.h:
Instead of using separate MDL_context for opening system tables we now
create MDL savepoint in the main context before opening such tables
and rollback to this savepoint after closing them. To support this
change methods of THD responsible for saving/restoring open table
state were changed to use Open_tables_backup class which in addition
to Open_table_state has a member for this savepoint. As result calls
opening/closing system tables were changed to use Open_tables_backup
instead of Open_table_state class as well.
sql/sp.cc:
Instead of using separate MDL_context for opening system tables we now
create MDL savepoint in the main context before opening such tables
and rollback to this savepoint after closing them. To support this
change methods of THD responsible for saving/restoring open table
state were changed to use Open_tables_backup class which in addition
to Open_table_state has a member for this savepoint. As result code
opening/closing system tables was changed to use Open_tables_backup
instead of Open_table_state class as well.
sql/sp.h:
Instead of using separate MDL_context for opening system tables we now
create MDL savepoint in the main context before opening such tables
and rollback to this savepoint after closing them. To support this
change methods of THD responsible for saving/restoring open table
state were changed to use Open_tables_backup class which in addition
to Open_table_state has a member for this savepoint. As result code
opening/closing system tables was changed to use Open_tables_backup
instead of Open_table_state class as well.
sql/sql_base.cc:
close_thread_tables():
Since we no longer use separate MDL_context for opening system
tables we need to avoid releasing all transaction locks when
closing system table. Releasing metadata lock on system table
is now responsibility of THD::restore_backup_open_tables_state().
open_table_get_mdl_lock(),
Open_table_context::recover_from_failed_open():
MDL subsystem no longer implicitly acquires global intention exclusive
metadata lock when per-object upgradable or exclusive metadata lock is
acquired. So this have to be done explicitly from these calls.
Changed Open_table_context class to store MDL_request object for
global intention exclusive lock acquired when opening tables.
open_table():
Do not release metadata lock if we have failed to open table as
this lock might have been acquired by one of previous statements
in transaction, and therefore should not be released.
open_system_tables_for_read()/close_system_tables()/
open_performance_schema_table():
Instead of using separate MDL_context for opening system tables we now
create MDL savepoint in the main context before opening such tables
and rollback to this savepoint after closing them. To support this
change methods of THD responsible for saving/restoring open table
state were changed to use Open_tables_backup class which in addition
to Open_table_state has a member for this savepoint. As result code
opening/closing system tables was changed to use Open_tables_backup
instead of Open_table_state class as well.
close_performance_schema_table():
Got rid of duplicated code.
sql/sql_class.cc:
Instead of using separate MDL_context for opening system tables we now
create MDL savepoint in the main context before opening such tables
and rollback to this savepoint after closing them. To support this
change methods of THD responsible for saving/restoring open table
state were changed to use Open_tables_backup class which in addition
to Open_table_state has a member for this savepoint. Also releasing
metadata lock on system table is now responsibility of
THD::restore_backup_open_tables_state().
Adjusted assert in THD::cleanup() to take into account fact that now
we also use MDL sentinel for global read lock.
sql/sql_class.h:
Instead of using separate MDL_context for opening system tables we now
create MDL savepoint in the main context before opening such tables
and rollback to this savepoint after closing them. As result:
- 'mdl_context' member was moved out of Open_tables_state to THD class.
enter_locked_tables_mode()/leave_locked_tables_mode() had to follow.
- Methods of THD responsible for saving/restoring open table state were
changed to use Open_tables_backup class which in addition to
Open_table_state has a member for this savepoint.
Changed Open_table_context class to store MDL_request object for
global intention exclusive lock acquired when opening tables.
sql/sql_delete.cc:
MDL subsystem no longer implicitly acquires global intention exclusive
metadata lock when per-object exclusive metadata lock is acquired.
Now this has to be done by explicit calls outside of MDL subsystem.
sql/sql_help.cc:
Instead of using separate MDL_context for opening system tables we now
create MDL savepoint in the main context before opening such tables
and rollback to this savepoint after closing them. To support this
change methods of THD responsible for saving/restoring open table
state were changed to use Open_tables_backup class which in addition
to Open_table_state has a member for this savepoint. As result code
opening/closing system tables was changed to use Open_tables_backup
instead of Open_table_state class as well.
sql/sql_parse.cc:
Adjusted assert reload_acl_and_cache() to the fact that global read
lock now takes full-blown metadata lock.
sql/sql_plist.h:
Added support for element counting to I_P_List list template.
One can use policy classes to specify if such counting is needed
or not needed for particular list.
sql/sql_show.cc:
Instead of using separate MDL_context for opening tables for I_S
purposes we now create MDL savepoint in the main context before
opening tables and rollback to this savepoint after closing them.
To support this and similar change for system tables methods of
THD responsible for saving/restoring open table state were changed
to use Open_tables_backup class which in addition to Open_table_state
has a member for this savepoint. As result code opening/closing tables
for I_S purposes was changed to use Open_tables_backup instead of
Open_table_state class as well.
sql/sql_table.cc:
mysql_rm_tables_part2():
Since now global intention exclusive metadata lock is ordinary
metadata lock we no longer can rely that by releasing MDL locks
on all tables we will release all locks acquired by this routine.
So in non-LOCK-TABLES mode we have to release all locks acquired
explicitly.
prepare_for_repair(), mysql_alter_table():
MDL subsystem no longer implicitly acquires global intention
exclusive metadata lock when per-object exclusive metadata lock
is acquired. Now this has to be done by explicit calls outside of
MDL subsystem.
sql/tztime.cc:
Instead of using separate MDL_context for opening system tables we now
create MDL savepoint in the main context before opening such tables
and rollback to this savepoint after closing them. To support this
change methods of THD responsible for saving/restoring open table
state were changed to use Open_tables_backup class which in addition
to Open_table_state has a member for this savepoint. As result code
opening/closing system tables was changed to use Open_tables_backup
instead of Open_table_state class as well.
Also changed code not to use special mechanism for open system tables
when it is not really necessary.
check_access() returning false for a database does not
guarantee that the access is granted to it.
This wrong condition in filling the INFORMATION_SCHEMA
tables causes extra tables to be returned to the user
even if he has no rights to see them.
Fixed by correcting the condition.
