We should avoid any SHARE fields assignments as
this is shared structure and assignments may
affect other therads. To avoid this
copy of SHARE struct is created and
stored into TABLE struct which is
used in get_schema_coulumns_record later.
mysql-test/r/mdl_sync.result:
test case
mysql-test/t/mdl_sync.test:
test case
sql/sql_show.cc:
We should avoid any SHARE fields assignments as
this is shared structure and assignments may
affect other therads. To avoid this
copy of SHARE struct is created and
stored into TABLE struct which is
used in get_schema_coulumns_record later.
There are two problems:
1. In simplify_joins function we calculate table dependencies. If STRAIGHT_JOIN hint
is used for whole SELECT we do not count it and as result some dependendecies
might be lost. It leads to incorrect table order which is returned by
join_tab_cmp_straight() function.
2. make_join_statistics() calculate the transitive closure for relations a particular
JOIN_TAB is 'dependent on'.
We aggregate the dependent table_map of a JOIN_TAB by adding dependencies from other
tables which we depend on. However, this may also cause new dependencies to be
available after we have completed processing a certain JOIN_TAB.
Both these problems affect condition pushdown and as result condition might be pushed
into wrong table which leads to crash or even omitted which leads to wrong result.
The fix:
1. Use modified 'transitive closure' algorithm provided by Ole John Aske
2. Update table dependences in simplify_joins according to
global STRAIGHT_JOIN hint.
Note: the patch also fixes bugs 46091 & 51492
mysql-test/r/join_outer.result:
test case
mysql-test/t/join_outer.test:
test case
sql/sql_select.cc:
1. Use modified 'transitive closure' algorithm provided by Ole John Aske
2. Update table dependences in simplify_joins according to
global STRAIGHT_JOIN hint.
The problem was that mdl_sync.test was failing sporadically,
due to fact that part of the test didn't take into account
effects of MyISAM's concurrent insert.
This patch solves the problem by making test case robust
against concurrent insert.
SELECT and ALTER TABLE ... REBUILD PARTITION".
ALTER TABLE on InnoDB table (including partitioned tables)
acquired exclusive locks on rows of table being altered.
In cases when there was concurrent transaction which did
locking reads from this table this sometimes led to a
deadlock which was not detected by MDL subsystem nor by
InnoDB engine (and was reported only after exceeding
innodb_lock_wait_timeout).
This problem stemmed from the fact that ALTER TABLE acquired
TL_WRITE_ALLOW_READ lock on table being altered. This lock
was interpreted as a write lock and thus for table being
altered handler::external_lock() method was called with
F_WRLCK as an argument. As result InnoDB engine treated
ALTER TABLE as an operation which is going to change data
and acquired LOCK_X locks on rows being read from old
version of table.
In case when there was a transaction which already acquired
SR metadata lock on table and some LOCK_S locks on its rows
(e.g. by using it in subquery of DML statement) concurrent
ALTER TABLE was blocked at the moment when it tried to
acquire LOCK_X lock before reading one of these rows.
The transaction's attempt to acquire SW metadata lock on
table being altered led to deadlock, since it had to wait
for ALTER TABLE to release SNW lock. This deadlock was not
detected and got resolved only after timeout expiring
because waiting were happening in two different subsystems.
Similar deadlocks could have occured in other situations.
This patch tries to solve the problem by changing ALTER TABLE
implementation to use TL_READ_NO_INSERT lock instead of
TL_WRITE_ALLOW_READ. After this step handler::external_lock()
is called with F_RDLCK as an argument and InnoDB engine
correctly interprets ALTER TABLE as operation which only
reads data from original version of table. Thanks to this
ALTER TABLE acquires only LOCK_S locks on rows it reads.
This, in its turn, causes inter-subsystem deadlocks to go
away, as all potential lock conflicts and thus deadlocks will
be limited to metadata locking subsystem:
- When ALTER TABLE reads rows from table being altered it
can't encounter any locks which conflict with LOCK_S row
locks. There should be no concurrent transactions holding
LOCK_X row locks. Such a transaction should have been
acquired SW metadata lock on table first which would have
conflicted with ALTER's SNW lock.
- Vice versa, when DML which runs concurrently with ALTER
TABLE tries to lock row it should be requesting only LOCK_S
lock which is compatible with locks acquired by ALTER,
as otherwise such DML must own an SW metadata lock on table
which would be incompatible with ALTER's SNW lock.
mysql-test/r/innodb_mysql_lock2.result:
Added test for bug #51263 "Deadlock between transactional
SELECT and ALTER TABLE ... REBUILD PARTITION".
mysql-test/suite/rpl_ndb/r/rpl_ndb_binlog_format_errors.result:
Since CREATE TRIGGER no longer acquires write lock on table
it is no longer interpreted as an operation which modifies
table data and therefore no longer fails if invoked for
SBR-only engine in ROW mode.
mysql-test/suite/rpl_ndb/t/rpl_ndb_binlog_format_errors.test:
Since CREATE TRIGGER no longer acquires write lock on table
it is no longer interpreted as an operation which modifies
table data and therefore no longer fails if invoked for
SBR-only engine in ROW mode.
mysql-test/t/innodb_mysql_lock2.test:
Added test for bug #51263 "Deadlock between transactional
SELECT and ALTER TABLE ... REBUILD PARTITION".
sql/ha_partition.cc:
When ALTER TABLE creates a new partition to be filled from
other partition lock it in F_WRLCK mode instead of using
mode which was used for locking the whole table (it is
F_RDLCK now).
sql/lock.cc:
Replaced conditions which used TL_WRITE_ALLOW_READ
lock type with equivalent conditions using
TL_WRITE_ALLOW_WRITE. This should allow to get rid
of TL_WRITE_ALLOW_READ lock type eventually.
sql/mdl.cc:
Updated outdated comment to reflect current situation.
sql/sql_base.cc:
Replaced conditions which used TL_WRITE_ALLOW_READ
lock type with equivalent conditions using
TL_WRITE_ALLOW_WRITE. This should allow to get rid
of TL_WRITE_ALLOW_READ lock type eventually.
sql/sql_table.cc:
mysql_admin_table():
Use TL_WRITE_ALLOW_WRITE lock type instead of
TL_WRITE_ALLOW_READ to determine that we need to acquire
upgradable metadata lock. This should allow to completely
get rid of TL_WRITE_ALLOW_READ in long term.
mysql_recreate_table():
ALTER TABLE now requires TL_READ_NO_INSERT thr_lock.c lock
instead of TL_WRITE_ALLOW_READ.
sql/sql_trigger.cc:
Changed CREATE/DROP TRIGGER implementation to use
TL_READ_NO_INSERT lock instead of TL_WRITE_ALLOW_READ lock.
The latter is no longer necessary since:
a) We now can rely on metadata locks to achieve proper
isolation between two DDL statements or DDL and DML
statements.
b) This statement does not change any data in table so there
is no need to inform storage engine about it.
sql/sql_yacc.yy:
Changed implementation of ALTER TABLE (and CREATE/DROP INDEX
as a consequence) to use TL_READ_NO_INSERT lock instead of
TL_WRITE_ALLOW_READ lock. This is possible since:
a) We now can rely on metadata locks to achieve proper
isolation between two DDL statements or DDL and DML
statements.
b) This statement only reads data in table being open.
We write data only to the new version of table and
then replace with it old version of table under
X metadata lock.
Thanks to this change InnoDB will no longer acquire LOCK_X
locks on rows being read by ALTER TABLE (instead LOCK_S
locks will be acquired) and thus cause of bug #51263
"Deadlock between transactional SELECT and ALTER TABLE ...
REBUILD PARTITION" is removed.
Did the similar change for CREATE TRIGGER (see comments
for sql_trigger.cc for details).
The problem was that TRUNCATE TABLE didn't take a exclusive
lock on a table if it resorted to truncating via delete of
all rows in the table. Specifically for InnoDB tables, this
could break proper isolation as InnoDB ends up aborting some
granted locks when truncating a table.
The solution is to take a exclusive metadata lock before
TRUNCATE TABLE can proceed. This guarantees that no other
transaction is using the table.
Incompatible change: Truncate via delete no longer fails
if sql_safe_updates is activated (this was a undocumented
side effect).
libmysqld/CMakeLists.txt:
Add new files to the build list.
libmysqld/Makefile.am:
Add new files to the build list.
mysql-test/extra/binlog_tests/binlog_truncate.test:
Add test case for Bug#42643
mysql-test/include/mix1.inc:
Update test case as TRUNCATE TABLE now grabs a exclusive lock.
Ensure that TRUNCATE waits for granted locks on the table.
mysql-test/suite/binlog/t/binlog_truncate_innodb.test:
As with other data modifying statements, TRUNCATE is still not
possible in a transaction with isolation level READ COMMITTED
or READ UNCOMMITED. It would be possible to implement so, but
it is not worth the effort.
mysql-test/suite/binlog/t/binlog_truncate_myisam.test:
Test under different binlog formats.
mysql-test/suite/binlog/t/disabled.def:
Re-enable test case.
mysql-test/t/innodb_bug38231.test:
Truncate no longer works with row-level locks.
mysql-test/t/mdl_sync.test:
Ensure that a acquired lock is not given up due to a conflict.
mysql-test/t/partition_innodb_semi_consistent.test:
End transaction as to release metadata locks.
mysql-test/t/truncate.test:
A metadata lock is now taken before the object is verified.
sql/CMakeLists.txt:
Add new files to the build list.
sql/Makefile.am:
Add new files to the build list.
sql/datadict.cc:
Introduce a new file specific for data dictionary operations.
sql/datadict.h:
Add header file.
sql/sql_base.cc:
Rename data dictionary function.
sql/sql_bitmap.h:
Include dependency.
sql/sql_delete.cc:
Move away from relying on mysql_delete() to delete all rows of
a table. Thus, move any bits related to truncate to sql_truncate.cc
sql/sql_delete.h:
Remove parameter.
sql/sql_parse.cc:
Add protection against the global read lock -- a intention
exclusive lock can be acquired in the truncate path.
sql/sql_show.cc:
Add sync point for testing scenarios where a pending flush
is ignored.
sql/sql_truncate.cc:
Acquire a shared metadata lock before accessing table metadata.
Upgrade the lock to a exclusive one if the table can be re-created.
Rework binlog rules to better reflect the requirements.
sql/sql_yacc.yy:
Set appropriate lock types for table to be truncated.
sql/table.h:
Move to data dictionary header.
bitmap_is_set(table->read_set, field_index))
UPDATE on an InnoDB table modifying the same index that is used
to satisfy the WHERE condition could trigger a debug assertion
under some circumstances.
Since for engines with the HA_PRIMARY_KEY_IN_READ_INDEX flag
set results of an index scan on a secondary index are appended
by the primary key value, if a query involves only columns from
the primary key and a secondary index, the latter is considered
to be covering.
That tricks mysql_update() to mark for reading only columns
from the secondary index when it does an index scan to retrieve
rows to update in case a part of that key is also being
updated. However, there may be other columns in WHERE that are
part of the primary key, but not the secondary one.
What we actually want to do in this case is to add index
columns to the existing WHERE columns bitmap rather than
replace it.
mysql-test/r/innodb_mysql.result:
Test case for bug #53830.
mysql-test/t/innodb_mysql.test:
Test case for bug #53830.
sql/sql_update.cc:
Add index columns to the read_set bitmap, don't replace it.
sql/table.cc:
Added a new add_read_columns_used_by_index() function to
st_table.
sql/table.h:
Added a new add_read_columns_used_by_index() function to
st_table.
Problem was reporting wrong error
Fixed by adding a new error which better explain the problem.
mysql-test/r/partition_error.result:
Bug#49161: Out of memory; restart server and try again (needed 2 bytes)
Updated test result
mysql-test/t/partition_error.test:
Bug#49161: Out of memory; restart server and try again (needed 2 bytes)
Added test case
sql/ha_partition.cc:
Bug#49161: Out of memory; restart server and try again (needed 2 bytes)
Better error message. (used ER_UNKNOWN_ERROR to avoid merge
problems in mysql-trunk+)
------------------------------------------------------------
revno: 3477
revision-id: vasil.dimov@oracle.com-20100520132735-a120y85kqmhp7hxi
parent: vasil.dimov@oracle.com-20100520125403-3u9ydcfu8vz8spls
committer: Vasil Dimov <vasil.dimov@oracle.com>
branch nick: mysql-5.1-innodb
timestamp: Thu 2010-05-20 16:27:35 +0300
message:
Disable main.ps_3innodb for valgrind tests since it results in known
failures, that are described in
Bug#38999 valgrind warnings for update statement in function compare_record()
At the time I am adding this the failures are:
main.ps_3innodb [ fail ] Found warnings/errors in server log file!
Test ended at 2010-05-20 01:17:34
line
==31559== Thread 11:
==31559== Conditional jump or move depends on uninitialised value(s)
==31559== at 0x75C5BD: compare_record(st_table*) (sql_update.cc:35)
==31559== by 0x744732: write_record(THD*, st_table*, st_copy_info*) (sql_insert.cc:1486)
==31559== by 0x74A0D7: mysql_insert(THD*, TABLE_LIST*, List<Item>&, List<List<Item> >&, List<Item>&, List<Item>&, enum_duplicates, bool) (sql_insert.cc:835)
==31559== by 0x6A79B4: mysql_execute_command(THD*) (sql_parse.cc:3198)
==31559== by 0x754998: Prepared_statement::execute(String*, bool) (sql_prepare.cc:3583)
==31559== by 0x754C4F: Prepared_statement::execute_loop(String*, bool, unsigned char*, unsigned char*) (sql_prepare.cc:3258)
==31559== by 0x754F33: mysql_sql_stmt_execute(THD*) (sql_prepare.cc:2529)
==31559== by 0x6A5028: mysql_execute_command(THD*) (sql_parse.cc:2272)
==31559== by 0x6ADAE8: mysql_parse(THD*, char const*, unsigned, char const**) (sql_parse.cc:5986)
==31559== by 0x6AF3A4: dispatch_command(enum_server_command, THD*, char*, unsigned) (sql_parse.cc:1233)
==31559== by 0x6B0800: do_command(THD*) (sql_parse.cc:874)
==31559== by 0x69CB46: handle_one_connection (sql_connect.cc:1134)
==31559== by 0x33EDA062F6: start_thread (in /lib64/libpthread-2.5.so)
==31559== by 0x33ECED1B6C: clone (in /lib64/libc-2.5.so)
==31559== Conditional jump or move depends on uninitialised value(s)
==31559== at 0x75C5D0: compare_record(st_table*) (sql_update.cc:35)
==31559== by 0x744732: write_record(THD*, st_table*, st_copy_info*) (sql_insert.cc:1486)
==31559== by 0x74A0D7: mysql_insert(THD*, TABLE_LIST*, List<Item>&, List<List<Item> >&, List<Item>&, List<Item>&, enum_duplicates, bool) (sql_insert.cc:835)
==31559== by 0x6A79B4: mysql_execute_command(THD*) (sql_parse.cc:3198)
==31559== by 0x754998: Prepared_statement::execute(String*, bool) (sql_prepare.cc:3583)
==31559== by 0x754C4F: Prepared_statement::execute_loop(String*, bool, unsigned char*, unsigned char*) (sql_prepare.cc:3258)
==31559== by 0x754F33: mysql_sql_stmt_execute(THD*) (sql_prepare.cc:2529)
==31559== by 0x6A5028: mysql_execute_command(THD*) (sql_parse.cc:2272)
==31559== by 0x6ADAE8: mysql_parse(THD*, char const*, unsigned, char const**) (sql_parse.cc:5986)
==31559== by 0x6AF3A4: dispatch_command(enum_server_command, THD*, char*, unsigned) (sql_parse.cc:1233)
==31559== by 0x6B0800: do_command(THD*) (sql_parse.cc:874)
==31559== by 0x69CB46: handle_one_connection (sql_connect.cc:1134)
==31559== by 0x33EDA062F6: start_thread (in /lib64/libpthread-2.5.so)
==31559== by 0x33ECED1B6C: clone (in /lib64/libc-2.5.so)
^ Found warnings in /export/home4/pb2/test/sb_3-1827397-1274300957.87/mysql-5.1.48-linux-x86_64-test/mysql-test/var-n_mix/log/mysqld.1.err
Some of the test cases reference to binlog position and
these position numbers are written into result explicitly.
It is difficult to maintain if log event format changes.
There are a couple of cases explicit position number appears,
we handle them in different ways
A. 'CHANGE MASTER ...' with MASTER_LOG_POS or/and RELAY_LOG_POS options
Use --replace_result to mask them.
B. 'SHOW BINLOG EVENT ...'
Replaced by show_binlog_events.inc or wait_for_binlog_event.inc.
show_binlog_events.inc file's function is enhanced by given
$binlog_file and $binlog_limit.
C. 'SHOW SLAVE STATUS', 'show_slave_status.inc' and 'show_slave_status2.inc'
For the test cases just care a few items in the result of 'SHOW SLAVE STATUS',
only the items related to each test case are showed.
'show_slave_status.inc' is rebuild, only the given items in $status_items
will be showed.
'check_slave_is_running.inc' and 'check_slave_no_error.inc'
and 'check_slave_param.inc' are auxiliary files helping
to show running status and error information easily.
mysql-test/extra/binlog_tests/binlog.test:
It only cares whether current binlog file index is changed, so it is ok
with 'show_master_status.inc' instead of 'show mater status'.
mysql-test/extra/binlog_tests/blackhole.test:
Use 'show_binlog_events.inc' instead of 'show binlog events' statement.
mysql-test/extra/rpl_tests/rpl_deadlock.test:
Use 'check_slave_is_running.inc' instead of 'show_slave_status2.inc'.
mysql-test/extra/rpl_tests/rpl_extraMaster_Col.test:
Use 'check_slave_is_running.inc' instead of 'show slave status' statement.
mysql-test/extra/rpl_tests/rpl_extraSlave_Col.test:
Use 'wait_for_slave_sql_error.inc' and 'ait_for_slave_sql_error_and_skip.inc' instead of 'show slave status'.
mysql-test/extra/rpl_tests/rpl_flsh_tbls.test:
Use 'show_binlog_events.inc' instead of 'show binlog events' statement.
mysql-test/extra/rpl_tests/rpl_get_master_version_and_clock.test:
It is need now to give a error number, so use 'wait_for_slave_io_to_stop.inc'
instead of 'wait_for_slave_io_error.inc'.
mysql-test/extra/rpl_tests/rpl_insert_delayed.test:
Use 'show_binlog_events.inc' instead of 'show binlog events' statement.
mysql-test/extra/rpl_tests/rpl_log.test:
Use 'show_binlog_events.inc' instead of 'show binlog events' statement.
se 'check_slave_is_running.inc' instead of 'show slave status' statement.
mysql-test/extra/rpl_tests/rpl_max_relay_size.test:
se 'check_slave_is_running.inc' instead of 'show slave status' statement.
mysql-test/extra/rpl_tests/rpl_ndb_apply_status.test:
Use 'show_binlog_events.inc' instead of 'show binlog events' statement.
mysql-test/extra/rpl_tests/rpl_reset_slave.test:
Use 'show_slave_status.inc' instead of 'show_slave_status2.inc' statement.
Use 'check_slave_no_error.inc' to simplify the check that there is no error.
mysql-test/extra/rpl_tests/rpl_row_basic.test:
Use 'check_slave_is_running.inc' to verify that Slave threads are running well.
Use 'wait_for_slave_sql_error.inc' to wait the given sql thread error happening.
mysql-test/extra/rpl_tests/rpl_row_tabledefs.test:
Use 'show_slave_error_status_and_skip.inc' instead of 'show slave status'.
mysql-test/include/check_slave_is_running.inc:
To make sure both sql and io thread are running well. If not, the test will be aborted.
mysql-test/include/check_slave_no_error.inc:
To make sure both sql and io thread have no error. If not, the test will be aborted.
mysql-test/include/get_relay_log_pos.inc:
According to the position of a log event in master binlog file,
find the peer position of a log event in relay log file.
mysql-test/include/rpl_stmt_seq.inc:
Use 'show_binlog_events.inc' instead of 'show binlog events' statement.
mysql-test/include/show_binlog_events.inc:
Add two options $binlog_file and $binlog_limit for showing binlog events from different binlog files or/and given different limits on position or row number.
mysql-test/include/show_rpl_debug_info.inc:
Add 'SELECT NOW()' in the debug information.
mysql-test/include/show_slave_status.inc:
It's more clean and tidy Only the given columns of slave status are printed.
mysql-test/include/test_fieldsize.inc:
Use 'wait_for_slave_sql_error.inc' to wait the given sql thread error happening.
There is no need to print the result of 'show slave stutus'.
mysql-test/include/wait_for_binlog_event.inc:
Use show_rpl_debug_info.inc instead of 'SHOW BINLOG EVENTS'.
mysql-test/include/wait_for_slave_io_error.inc:
Add $slave_io_errno and $show_slave_io_error, it waits only a given error.
mysql-test/include/wait_for_slave_param.inc:
Use die instead of exit.
mysql-test/include/wait_for_slave_sql_error.inc:
Add $slave_sql_errno and $show_slave_sql_error, it waits only a given error.
mysql-test/include/wait_for_status_var.inc:
Use die instead of exit.
mysql-test/r/flush_block_commit_notembedded.result:
It checks whether somethings are binlogged, so we using 'show_binlog_event.inc' instead of 'show master status'.
mysql-test/r/multi_update.result:
It checks whether somethings are binlogged, so we using 'show_binlog_event.inc' instead of 'show master status'.
mysql-test/suite/binlog/r/binlog_innodb.result:
It checks whether somethings are binlogged, so we using 'show_binlog_event.inc' instead of 'show master status'.
mysql-test/suite/binlog/r/binlog_row_binlog.result:
Position in the result of 'show master status' is replaced by '#'.
mysql-test/suite/binlog/r/binlog_stm_binlog.result:
Position in the result of 'show master status' is replaced by '#'.
mysql-test/suite/binlog/t/binlog_innodb.test:
It checks whether somethings are binlogged, so we use 'show_binlog_event.inc' instead of 'show master status'.
mysql-test/suite/binlog/t/binlog_stm_binlog.test:
Use 'show_binlog_events.inc' instead of 'show binlog events' statement.
mysql-test/suite/bugs/r/rpl_bug36391.result:
Position in the result of 'show master status' is replaced by '#'.
mysql-test/suite/bugs/t/rpl_bug12691.test:
Use 'show_binlog_events.inc' instead of 'show binlog events' statement.
mysql-test/suite/bugs/t/rpl_bug36391.test:
'show master status' is replaced by 'show_master_status.inc'.
Position in the result of 'show master status' is replaced by '#'.
mysql-test/suite/engines/funcs/r/rpl_000015.result:
It checks whether somethings are binlogged,
so we using 'show_binlog_event.inc' instead of 'show master status'.
mysql-test/suite/engines/funcs/t/rpl_000015.test:
Use 'check_slave_is_running.inc' to verify that Slave threads are running well.
mysql-test/suite/engines/funcs/t/rpl_REDIRECT.test:
Use 'query_vertical SHOW SLAVE STATUS' instead of 'show slave status'.
There is no status columns in the result file, for no slave exists on master's server.
mysql-test/suite/engines/funcs/t/rpl_change_master.test:
This test just care whether Read_Master_Log_Pos is equal to Exec_Master_Log_Pos after 'CHANGE MASTER ..'. So 'show slave status' is removed and just check the value of Read_Master_Log_Pos and Exec_Master_Log_Pos.
mysql-test/suite/engines/funcs/t/rpl_empty_master_crash.test:
We doesn't really need the statement.
mysql-test/suite/engines/funcs/t/rpl_flushlog_loop.test:
Just show Relay_Log_File, running status and error informations.
Use 'check_slave_is_running.inc' to verify that Slave threads are running well.
mysql-test/suite/engines/funcs/t/rpl_loaddata_s.test:
Use 'show_binlog_events.inc' instead of 'show binlog events' statement.
mysql-test/suite/engines/funcs/t/rpl_log_pos.test:
Mask the explicit positions in the result file.
Use 'check_slave_no_error.inc' to simplify the check that there is no error.
Use 'wait_for_slave_sql_error.inc' to wait the given sql thread error happening.
There is no need to print the result of 'show slave stutus'.
mysql-test/suite/engines/funcs/t/rpl_rbr_to_sbr.test:
Use 'show_binlog_events.inc' instead of 'show binlog events' statement.
mysql-test/suite/engines/funcs/t/rpl_row_drop.test:
Use 'show_binlog_events.inc' instead of 'show binlog events' statement.
mysql-test/suite/engines/funcs/t/rpl_row_inexist_tbl.test:
Use 'wait_for_slave_sql_error.inc' to wait the given sql thread error happening.
There is no need to print the result of 'show slave stutus'.
mysql-test/suite/engines/funcs/t/rpl_row_until.test:
Use 'check_slave_param.inc' to check whether SQL Thread stop at a right position, and use binlog position variables instead of explicit number in the 'CHANGE MASTER' statements.
Mask the explicit binary log positions in the result file.
mysql-test/suite/engines/funcs/t/rpl_server_id1.test:
Use 'wait_for_slave_sql_error.inc' to wait the given sql thread error happening.
There is no need to print the result of 'show slave stutus'.
Use 'check_slave_no_error.inc' to simplify the check that there is no error.
mysql-test/suite/engines/funcs/t/rpl_server_id2.test:
It doesn't really need in this test.
mysql-test/suite/engines/funcs/t/rpl_slave_status.test:
Use 'wait_for_slave_sql_error.inc' to wait the given sql thread error happening.
There is no need to print the result of 'show slave stutus'.
mysql-test/suite/engines/funcs/t/rpl_switch_stm_row_mixed.test:
Use 'show_binlog_events.inc' instead of 'show binlog events' statement.
mysql-test/suite/manual/t/rpl_replication_delay.test:
Use 'show_slave_status.inc' instead of 'show slave status'.
mysql-test/suite/parts/t/rpl_partition.test:
Use 'check_slave_is_running.inc' instead of 'show slave status' statement.
mysql-test/suite/rpl/include/rpl_mixed_ddl.inc:
Use 'show_binlog_events.inc' instead of 'show binlog events' statement.
mysql-test/suite/rpl/include/rpl_mixed_dml.inc:
Use 'show_binlog_events.inc' instead of 'show binlog events' statement.
mysql-test/suite/rpl/t/rpl_000015.test:
Use 'show_slave_status.inc' instead of 'show_slave_status2.inc'.
mysql-test/suite/rpl/t/rpl_binlog_grant.test:
Use 'wait_for_binlog_event.inc' instead of 'show binlog events' statement.
mysql-test/suite/rpl/t/rpl_bug33931.test:
Use 'wait_for_slave_sql_error.inc' to wait the given sql thread error happening.
There is no need to print the result of 'show slave stutus'.
mysql-test/suite/rpl/t/rpl_change_master.test:
This test just care whether Read_Master_Log_Pos is equal to Exec_Master_Log_Pos after 'CHANGE MASTER ..'. So 'show slave status' is removed and just check the value of Read_Master_Log_Pos and Exec_Master_Log_Pos.
mysql-test/suite/rpl/t/rpl_critical_errors.test:
Use 'wait_for_slave_sql_error.inc' to wait the given sql thread error happening.
There is no need to print the result of 'show slave stutus'.
mysql-test/suite/rpl/t/rpl_dual_pos_advance.test:
Mask the explicit position numbers in result file.
It is restricted running on SBR, for it want to binlog 'set @a=1' statement.
mysql-test/suite/rpl/t/rpl_empty_master_crash.test:
It doesn't need in this test.
mysql-test/suite/rpl/t/rpl_flushlog_loop.test:
UUse 'check_slave_is_running.inc' and 'show_slave_status.inc' instead of 'show slave status' statement.
mysql-test/suite/rpl/t/rpl_get_master_version_and_clock.test:
Use 'wait_for_slave_io_error.inc' to wait the given io thread error happening.
mysql-test/suite/rpl/t/rpl_grant.test:
It doesn't need in this test.
mysql-test/suite/rpl/t/rpl_incident.test:
Use 'check_slave_is_running.inc' instead of 'show slave status' statement.
mysql-test/suite/rpl/t/rpl_known_bugs_detection.test:
Use 'wait_for_slave_sql_error.inc' to wait the given sql thread error happening.
There is no need to print the result of 'show slave stutus'.
mysql-test/suite/rpl/t/rpl_loaddata_fatal.test:
Use 'wait_for_slave_sql_error_and_skip.inc' to wait the given sql thread error happening and then skip the event. There is no need to print the result of 'show slave stutus'.
mysql-test/suite/rpl/t/rpl_log_pos.test:
Use 'wait_for_slave_io_error.inc' to wait the given io thread error happening.
There is no need to print the result of 'show slave status'.
mysql-test/suite/rpl/t/rpl_rbr_to_sbr.test:
Use 'show_binlog_events.inc' instead of 'show binlog events' statement.
mysql-test/suite/rpl/t/rpl_replicate_do.test:
Use 'show_slave_status.inc' instead of 'show slave status'.
mysql-test/suite/rpl/t/rpl_rotate_logs.test:
Use 'show_slave_status.inc' instead of 'show_slave_status2.inc'.
mysql-test/suite/rpl/t/rpl_row_basic_11bugs.test:
Use 'show_binlog_events.inc' instead of 'show binlog events' statement.
mysql-test/suite/rpl/t/rpl_row_create_table.test:
Use 'show_binlog_events.inc' instead of 'show binlog events' statement.
mysql-test/suite/rpl/t/rpl_row_drop.test:
Use 'show_binlog_events.inc' instead of 'show binlog events' statement.
mysql-test/suite/rpl/t/rpl_row_until.test:
Use 'check_slave_param.inc' to check whether SQL Thread stop at a right position, and use binlog position variables instead of explicit number in the 'CHANGE MASTER' statements.
mysql-test/suite/rpl/t/rpl_skip_error.test:
Use 'check_slave_is_running.inc' instead of 'show slave status' statement.
mysql-test/suite/rpl/t/rpl_slave_load_remove_tmpfile.test:
Use 'wait_for_slave_sql_error.inc' to wait the given sql thread error happening.
There is no need to print the result of 'show slave status'.
mysql-test/suite/rpl/t/rpl_slave_skip.test:
Use 'check_slave_param.inc' to check whether SQL Thread stop at a right position, and mask the explicit position number in the 'CHANGE MASTER' statements.
mysql-test/suite/rpl/t/rpl_sp.test:
Use 'show_binlog_events.inc' instead of 'show binlog events' statement.
mysql-test/suite/rpl/t/rpl_ssl.test:
Use 'show_slave_status.inc' instead of 'show slave status'.
mysql-test/suite/rpl/t/rpl_ssl1.test:
Use 'show_slave_status.inc' instead of 'show slave status'.
mysql-test/suite/rpl/t/rpl_stm_until.test:
Use 'check_slave_param.inc' to check whether SQL Thread stop at a right position, and use binlog position variables instead of explicit number in the 'CHANGE MASTER' statements.
mysql-test/suite/rpl/t/rpl_temporary_errors.test:
Use 'check_slave_is_running.inc' instead of 'show slave status' statement.
mysql-test/suite/rpl_ndb/t/rpl_ndb_basic.test:
Use 'wait_for_slave_sql_error.inc' to wait the given sql thread error happening.
There is no need to print the result of 'show slave status'.
mysql-test/suite/rpl_ndb/t/rpl_ndb_circular.test:
Use 'check_slave_is_running.inc' instead of 'show slave status' statement.
mysql-test/suite/rpl_ndb/t/rpl_ndb_circular_simplex.test:
Use 'check_slave_is_running.inc' instead of 'show slave status' statement.
mysql-test/suite/rpl_ndb/t/rpl_ndb_idempotent.test:
Use 'check_slave_is_running.inc' instead of 'show slave status' statement.
mysql-test/suite/rpl_ndb/t/rpl_ndb_multi.test:
Mask master_log_pos and master_log_file
mysql-test/suite/rpl_ndb/t/rpl_ndb_sync.test:
Use 'check_slave_is_running.inc' instead of 'show slave status' statement.
mysql-test/suite/rpl_ndb/t/rpl_truncate_7ndb.test:
Use 'show_binlog_events.inc' instead of 'show binlog events' statement.
mysql-test/t/alter_table-big.test:
Use 'show_binlog_events.inc' instead of 'show binlog events' statement.
mysql-test/t/create-big.test:
Use 'show_binlog_events.inc' instead of 'show binlog events' statement.
mysql-test/t/ctype_cp932_binlog_stm.test:
Use 'show_binlog_events.inc' instead of 'show binlog events' statement.
mysql-test/t/flush_block_commit_notembedded.test:
It checks whether somethings are binlogged,
so we using 'show_binlog_event.inc' instead of 'show master status'.
mysql-test/t/multi_update.test:
It checks whether somethings are binlogged,
so we using 'wait_binlog_event.inc' instead of 'show master status'.
mysql-test/t/sp_trans_log.test:
Use 'show_binlog_events.inc' instead of 'show binlog events' statement.
data directory name command
The check_db_name function has been modified to validate tails of
#mysql50#-prefixed database names for compliance with MySQL 5.0
database name encoding rules (the check_table_name function call
has been reused).
mysql-test/r/renamedb.result:
Updated test case.
mysql-test/r/upgrade.result:
Test case for bug #53804.
mysql-test/t/renamedb.test:
Updated test case.
mysql-test/t/upgrade.test:
Test case for bug #53804.
sql/mysql_priv.h:
Bug #53804: serious flaws in the alter database .. upgrade
data directory name command
The check_mysql50_prefix has been added.
sql/sql_table.cc:
Bug #53804: serious flaws in the alter database .. upgrade
data directory name command
- The check_mysql50_prefix has been added.
- The check_n_cut_mysql50_prefix function has been refactored
to share code with new check_mysql50_prefix function.
sql/table.cc:
Bug #53804: serious flaws in the alter database .. upgrade
data directory name command
The check_db_name function has been modified to validate tails of
#mysql50#-prefixed database names for compliance with MySQL 5.0
database name encoding rules.
FOR UPDATE is causing a lock".
This patch tries to address problems which were exposed
during backporting of original patch to 5.1 tree.
- It ensures that we don't change locking behavior of simple
SELECT statements on InnoDB tables when they are executed
under LOCK TABLES ... READ and with @@innodb_table_locks=0.
Also we no longer pass TL_READ_DEFAULT/TL_WRITE_DEFAULT
lock types, which are supposed to be parser-only, to
handler::start_stmt() method.
- It makes check_/no_concurrent_insert.inc auxiliary scripts
more robust against changes in test cases that use them
and also ensures that they don't unnecessarily change
environment of caller.
mysql-test/include/check_concurrent_insert.inc:
Reset DEBUG_SYNC facility before and after using it in
auxiliary script. This makes this script more robust against
changes in test cases calling it. It also ensures that script
does not unnecessarily change environment of caller.
mysql-test/include/check_no_concurrent_insert.inc:
Reset DEBUG_SYNC facility before and after using it in
auxiliary script. This makes this script more robust against
changes in test cases calling it. It also ensures that script
does not unnecessarily change environment of caller.
mysql-test/r/innodb-lock.result:
Added coverage for LOCK TABLES ... READ behavior in
@@innodb_table_locks = 0 mode. This test also checks
that an appropriate type of lock is passed to
handler::start_stmt() method.
mysql-test/t/innodb-lock.test:
Added coverage for LOCK TABLES ... READ behavior in
@@innodb_table_locks = 0 mode. This test also checks
that an appropriate type of lock is passed to
handler::start_stmt() method.
sql/sql_base.cc:
Since we no longer set TL_READ as lock type for tables used
in simple SELECT right in the parser, in order to preserve
behavior for such statements on InnoDB tables when in
LOCK TABLES mode with @innodb_table_locks = 0,
check_lock_and_start_stmt() had to be changed to convert
TL_READ_DEFAULT to an appropriate type of read lock before
passing it to handler::start_stmt() method.
We do similar thing for TL_WRITE_DEFAULT as this lock type
is also supposed to be parser-only type.
As consequence read_lock_type_for_table() had to be
adjusted to behave properly when it is called from
check_lock_and_start_stmt() in prelocked mode.
Item_hex_string::Item_hex_string
The status of memory allocation in the Lex_input_stream (called
from the Parser_state constructor) was not checked which led to
a parser crash in case of the out-of-memory error.
The solution is to introduce new init() member function in
Parser_state and Lex_input_stream so that status of memory
allocation can be returned to the caller.
mysql-test/r/error_simulation.result:
Added a test case for bug #42064.
mysql-test/t/error_simulation.test:
Added a test case for bug #42064.
mysys/my_alloc.c:
Added error injection code for the regression test.
mysys/my_malloc.c:
Added error injection code for the regression test.
mysys/safemalloc.c:
Added error injection code for the regression test.
sql/event_data_objects.cc:
Use the new init() member function of Parser_state and check
its return value to handle memory allocation failures.
sql/mysqld.cc:
Added error injection code for the regression test.
sql/sp.cc:
Use the new init() member function of Parser_state and check
its return value to handle memory allocation failures.
sql/sql_lex.cc:
Moved memory allocation from constructor to the separate init()
member function.
Added error injection code for the regression test.
sql/sql_lex.h:
Moved memory allocation from constructor to the separate init()
member function.
sql/sql_parse.cc:
Use the new init() member function of Parser_state and check
its return value to handle memory allocation failures.
sql/sql_partition.cc:
Use the new init() member function of Parser_state and check
its return value to handle memory allocation failures.
sql/sql_prepare.cc:
Use the new init() member function of Parser_state and check
its return value to handle memory allocation failures.
sql/sql_trigger.cc:
Use the new init() member function of Parser_state and check
its return value to handle memory allocation failures.
sql/sql_view.cc:
Use the new init() member function of Parser_state and check
its return value to handle memory allocation failures..
sql/thr_malloc.cc:
Added error injection code for the regression test.
Problem: The test case mysqldump reads a file that must
be world-readable. The test did not force the file to be
world-readable, so if the tree was branched with a umask
of 0077, the test would fail.
Fix: chmod the file.
mysql-test/t/mysqldump.test:
Added chmod so that the file is guaranteed to be world-readable.
failures, that are described in
Bug#38999 valgrind warnings for update statement in function compare_record()
At the time I am adding this the failures are:
main.ps_3innodb [ fail ] Found warnings/errors in server log file!
Test ended at 2010-05-20 01:17:34
line
==31559== Thread 11:
==31559== Conditional jump or move depends on uninitialised value(s)
==31559== at 0x75C5BD: compare_record(st_table*) (sql_update.cc:35)
==31559== by 0x744732: write_record(THD*, st_table*, st_copy_info*) (sql_insert.cc:1486)
==31559== by 0x74A0D7: mysql_insert(THD*, TABLE_LIST*, List<Item>&, List<List<Item> >&, List<Item>&, List<Item>&, enum_duplicates, bool) (sql_insert.cc:835)
==31559== by 0x6A79B4: mysql_execute_command(THD*) (sql_parse.cc:3198)
==31559== by 0x754998: Prepared_statement::execute(String*, bool) (sql_prepare.cc:3583)
==31559== by 0x754C4F: Prepared_statement::execute_loop(String*, bool, unsigned char*, unsigned char*) (sql_prepare.cc:3258)
==31559== by 0x754F33: mysql_sql_stmt_execute(THD*) (sql_prepare.cc:2529)
==31559== by 0x6A5028: mysql_execute_command(THD*) (sql_parse.cc:2272)
==31559== by 0x6ADAE8: mysql_parse(THD*, char const*, unsigned, char const**) (sql_parse.cc:5986)
==31559== by 0x6AF3A4: dispatch_command(enum_server_command, THD*, char*, unsigned) (sql_parse.cc:1233)
==31559== by 0x6B0800: do_command(THD*) (sql_parse.cc:874)
==31559== by 0x69CB46: handle_one_connection (sql_connect.cc:1134)
==31559== by 0x33EDA062F6: start_thread (in /lib64/libpthread-2.5.so)
==31559== by 0x33ECED1B6C: clone (in /lib64/libc-2.5.so)
==31559== Conditional jump or move depends on uninitialised value(s)
==31559== at 0x75C5D0: compare_record(st_table*) (sql_update.cc:35)
==31559== by 0x744732: write_record(THD*, st_table*, st_copy_info*) (sql_insert.cc:1486)
==31559== by 0x74A0D7: mysql_insert(THD*, TABLE_LIST*, List<Item>&, List<List<Item> >&, List<Item>&, List<Item>&, enum_duplicates, bool) (sql_insert.cc:835)
==31559== by 0x6A79B4: mysql_execute_command(THD*) (sql_parse.cc:3198)
==31559== by 0x754998: Prepared_statement::execute(String*, bool) (sql_prepare.cc:3583)
==31559== by 0x754C4F: Prepared_statement::execute_loop(String*, bool, unsigned char*, unsigned char*) (sql_prepare.cc:3258)
==31559== by 0x754F33: mysql_sql_stmt_execute(THD*) (sql_prepare.cc:2529)
==31559== by 0x6A5028: mysql_execute_command(THD*) (sql_parse.cc:2272)
==31559== by 0x6ADAE8: mysql_parse(THD*, char const*, unsigned, char const**) (sql_parse.cc:5986)
==31559== by 0x6AF3A4: dispatch_command(enum_server_command, THD*, char*, unsigned) (sql_parse.cc:1233)
==31559== by 0x6B0800: do_command(THD*) (sql_parse.cc:874)
==31559== by 0x69CB46: handle_one_connection (sql_connect.cc:1134)
==31559== by 0x33EDA062F6: start_thread (in /lib64/libpthread-2.5.so)
==31559== by 0x33ECED1B6C: clone (in /lib64/libc-2.5.so)
^ Found warnings in /export/home4/pb2/test/sb_3-1827397-1274300957.87/mysql-5.1.48-linux-x86_64-test/mysql-test/var-n_mix/log/mysqld.1.err
Server crashes on 64bit linux with 'double free or corruption'
message, on 32bit mysql-test-run silently fails on bootstrap
stage. The problem is that FreeState() is called twice
for init_settings struct in _db_end_ function.
The fix is to remove superfluous FreeState() call.
Additional fix:
fixed discrepancy of result file when
debug & valgrind options are enabled
for MTR.
dbug/dbug.c:
The problem is that FreeState() is called twice
for init_settings struct in _db_end_ function.
The fix is to remove superfluous FreeState() call.
mysql-test/r/variables_debug.result:
fixed discrepancy of result file when
debug & valgrind options are enabled
for MTR.
mysql-test/t/variables_debug.test:
fixed discrepancy of result file when
debug & valgrind options are enabled
for MTR.
sql/set_var.cc:
fixed discrepancy of result file when
debug & valgrind options are enabled
for MTR.
The problem was that OPTMIZE TABLE was allowed to run on a table
in use by a transaction in a different connection. This caused
repeatable read to break.
This bug was fixed by the introduction of metadata locking, WL#4284.
OPTIMIZE TABLE will now be blocked until the transaction using the
table, has ended.
This patch contains a regression test added to innodb_mysql_lock.test
and no code changes.
Bug #50087 Interval arithmetic for Event_queue_element is not portable.
Subtraction of two unsigned months yielded a (very large) positive value.
Conversion of this to a signed value was not necessarily well defined.
Solution: do the subtraction on signed values.
mysql-test/r/events_scheduling.result:
Add test case.
mysql-test/t/events_scheduling.test:
Add test case.
sql/event_data_objects.cc:
Convert month to signed before doing the subtraction.
multiquery packet).
Background:
- a query can contain multiple SQL statements;
- the server frees resources allocated to process a query when the
whole query is handled. In other words, resources allocated to process
one SQL statement from a multi-statement query are freed when all SQL
statements are handled.
The problem was that the parser allocated a buffer of size of the whole
query for each SQL statement in a multi-statement query. Thus, if a query
had many SQL-statements (so, the query was long), but each SQL statement
was short, ther parser tried to allocate huge amount of memory (number of
small SQL statements * length of the whole query).
The memory was allocated for a so-called "cpp buffer", which is intended to
store pre-processed SQL statement -- SQL text without version specific
comments.
The fix is to allocate memory for the "cpp buffer" once for all SQL
statements (once for a query).
ha_myisam::index_first(uchar*)") at assert.c:81
Single-table DELETE crash/assertion similar to single-table
UPDATE bug 14272.
Same resolution as for the bug 14272:
Don't run index scan when we should use quick select.
This could cause failures because there are table handlers (like federated)
that support quick select scanning but do not support index scanning.
mysql-test/r/delete.result:
Test case for bug #53450.
mysql-test/t/delete.test:
Test case for bug #53450.
sql/sql_delete.cc:
Bug #53450: Crash / assertion "virtual int
ha_myisam::index_first(uchar*)") at assert.c:81
The mysql_delete function has been modified to not to use
init_read_record_idx instead of init_read_record for the
quick select.
NULL from outer join query
Problem: optimising MIN/MAX() queries without GROUP BY clause
by replacing the aggregate expression with a constant, we may set it
to NULL disregarding the fact that there may be outer joins involved.
Fix: don't replace MIN/MAX() with NULL if there're outer joins.
Note: the fix itself is just
- if (!count)
+ if (!count && !outer_tables)
set to NULL
The rest of the patch eliminates repeated code to improve speed
and for easy maintenance of the code.
mysql-test/r/group_by.result:
Fix for bug#52051: Aggregate functions incorrectly returns
NULL from outer join query
- test result.
mysql-test/t/group_by.test:
Fix for bug#52051: Aggregate functions incorrectly returns
NULL from outer join query
- test case.
sql/opt_sum.cc:
Fix for bug#52051: Aggregate functions incorrectly returns
NULL from outer join query
- optimising MIN/MAX() queries without GROUP BY clause by
replacing them with a constant, take into account that
there're may be outer joins involved.
- repeated code for MIN/MAX optimization in the opt_sum_query()
eliminated by introducing new functions that read MIN/MAX values
using index and combining MIN/MAX cases to one.
update statements
Only SELECT statements report any examined rows in the slow
log. Slow UPDATE, DELETE and INSERT statements report 0 rows
examined, unless the statement has a condition including a
SELECT substatement.
This patch adds counting of examined rows for the UPDATE and
DELETE statements. An INSERT ... VALUES statement will still
not report any rows as examined.
sql/sql_class.h:
Added more docs for THD::examined_row_count.
sql/sql_delete.cc:
Add incrementing thd->examined_row_count.
sql/sql_update.cc:
Add incrementing thd->examined_row_count.
