With statement- or mixed-mode logging, "LOAD DATA INFILE" queries
are written to the binlog using special types of log events.
When mysqlbinlog reads such events, it re-creates the file in a
temporary directory with a generated filename and outputs a
"LOAD DATA INFILE" query where the filename is replaced by the
generated file. The temporary file is not deleted by mysqlbinlog
after termination.
To fix the problem, in mixed mode we go to row-based. In SBR, we
document it to remind user the tmpfile is left in a temporary
directory.
mysql-test/extra/rpl_tests/rpl_loaddata.test:
Updated for Bug#34283
mysql-test/suite/binlog/r/binlog_mixed_load_data.result:
Test result for BUG#34283.
mysql-test/suite/binlog/t/binlog_killed_simulate.test:
Updated for Bug#34283
mysql-test/suite/binlog/t/binlog_mixed_load_data.test:
Added the test file to verify that 'load data infile...' statement
will go to row-based in mixed mode.
mysql-test/suite/binlog/t/binlog_stm_blackhole.test:
Updated for Bug#34283
mysql-test/suite/rpl/r/rpl_innodb_mixed_dml.result:
Updated for Bug#34283
mysql-test/suite/rpl/t/rpl_loaddata_fatal.test:
Updated for Bug#34283
mysql-test/suite/rpl/t/rpl_loaddata_map.test:
Updated for Bug#34283
mysql-test/suite/rpl/t/rpl_slave_load_remove_tmpfile.test:
Updated for Bug#34283
mysql-test/suite/rpl/t/rpl_stm_log.test:
Updated for Bug#34283
sql/sql_load.cc:
Added code to go to row-based in mixed mode for
'load data infile ...' statement
A CREATE...SELECT that fails is written to the binary log if a non-transactional
statement is updated. If the logging format is ROW, the CREATE statement and the
changes are written to the binary log as distinct events and by consequence the
created table is not rolled back in the slave.
In this patch, we opted to let the slave goes out of sync by not writting to the
binary log the CREATE statement. We do this by simply reseting the binary log's
cache.
mysql-test/suite/rpl/r/rpl_drop.result:
Added a test case.
mysql-test/suite/rpl/t/rpl_drop.test:
Added a test case.
sql/log.cc:
Introduced a function to clean up the cache.
sql/log.h:
Introduced a function to clean up the cache.
sql/sql_insert.cc:
Cleaned up the binary log cache if a CREATE...SELECT fails.
******
This patch fixes the following bugs:
- Bug#5889: Exit handler for a warning doesn't hide the warning in
trigger
- Bug#9857: Stored procedures: handler for sqlwarning ignored
- Bug#23032: Handlers declared in a SP do not handle warnings generated
in sub-SP
- Bug#36185: Incorrect precedence for warning and exception handlers
The problem was in the way warnings/errors during stored routine execution
were handled. Prior to this patch the logic was as follows:
- when a warning/an error happens: if we're executing a stored routine,
and there is a handler for that warning/error, remember the handler,
ignore the warning/error and continue execution.
- after a stored routine instruction is executed: check for a remembered
handler and activate one (if any).
This logic caused several problems:
- if one instruction generates several warnings (errors) it's impossible
to choose the right handler -- a handler for the first generated
condition was chosen and remembered for activation.
- mess with handling conditions in scopes different from the current one.
- not putting generated warnings/errors into Warning Info (Diagnostic
Area) is against The Standard.
The patch changes the logic as follows:
- Diagnostic Area is cleared on the beginning of each statement that
either is able to generate warnings, or is able to work with tables.
- at the end of a stored routine instruction, Diagnostic Area is left
intact.
- Diagnostic Area is checked after each stored routine instruction. If
an instruction generates several condition, it's now possible to take a
look at all of them and determine an appropriate handler.
mysql-test/r/signal.result:
Update result file:
1. handled conditions are not cleared any more;
2. reflect changes in signal.test
mysql-test/r/signal_demo3.result:
Update result file: handled conditions are not cleared any more.
Due to playing with max_error_count, resulting warning lists
have changed.
mysql-test/r/sp-big.result:
Update result file: handled conditions are not cleared any more.
mysql-test/r/sp-bugs.result:
Update result file: handled conditions are not cleared any more.
mysql-test/r/sp-code.result:
Update result file:
1. handled conditions are not cleared any more.
2. add result for a new test case in sp-code.test.
mysql-test/r/sp-error.result:
Update result file:
1. handled conditions are not cleared any more.
2. add result for a new test case in sp-error.test.
mysql-test/r/sp.result:
Update result file: handled conditions are not cleared any more.
mysql-test/r/sp_trans.result:
Update result file: handled conditions are not cleared any more.
mysql-test/r/strict.result:
Update result file: handled conditions are not cleared any more.
mysql-test/r/view.result:
Update result file: handled conditions are not cleared any more.
mysql-test/suite/funcs_1/r/innodb_storedproc_02.result:
Update result file: handled conditions are not cleared any more.
mysql-test/suite/funcs_1/r/memory_storedproc_02.result:
Update result file: handled conditions are not cleared any more.
mysql-test/suite/funcs_1/r/myisam_storedproc_02.result:
Update result file: handled conditions are not cleared any more.
mysql-test/suite/funcs_1/r/storedproc.result:
Update result file: handled conditions are not cleared any more.
mysql-test/suite/rpl/r/rpl_row_sp005.result:
Update result file: handled conditions are not cleared any more.
mysql-test/suite/rpl/r/rpl_row_sp006_InnoDB.result:
Update result file: handled conditions are not cleared any more.
mysql-test/suite/rpl/r/rpl_row_trig003.result:
Update result file: handled conditions are not cleared any more.
mysql-test/t/signal.test:
Make a test case more readable in the result file.
mysql-test/t/sp-code.test:
Add a test case for Bug#23032 checking that
No Data takes precedence on Warning.
mysql-test/t/sp-error.test:
Adding test cases for:
- Bug#23032
- Bug#36185
- Bug#5889
- Bug#9857
mysql-test/t/sp.test:
Fixing test case to reflect behavioral changes made by the patch.
sql/sp_head.cc:
Reset the per-statement warning count before executing
a stored procedure instruction.
Move to a separate function code which checks the
completion status of the executed statement and searches
for a handler.
Remove redundant code now that search for a handler is
done after execution, errors are always pushed.
sql/sp_pcontext.h:
Remove unused code.
sql/sp_rcontext.cc:
- Polish sp_rcontext::find_handler(): use sp_rcontext::m_hfound instead
of an extra local variable;
- Remove sp_rcontext::handle_condition();
- Introduce sp_rcontext::activate_handler(), which prepares
previously found handler for execution.
- Move sp_rcontext::enter_handler() code into activate_handler(),
because enter_handler() is used only from there;
- Cleanups;
- Introduce DBUG_EXECUTE_IF() for a test case in sp-code.test
sql/sp_rcontext.h:
- Remove unused code
- Cleanups
sql/sql_class.cc:
Merge THD::raise_condition_no_handler() into THD::raise_condition().
After the patch raise_condition_no_handler() was called
in raise_condition() only.
sql/sql_class.h:
Remove raise_condition_no_handler().
sql/sql_error.cc:
Remove Warning_info::reserve_space() -- handled conditions are not
cleared any more, so there is no need for RESIGNAL to re-push them.
sql/sql_error.h:
Remove Warning_info::reserve_space().
sql/sql_signal.cc:
Handled conditions are not cleared any more,
so there is no need for RESIGNAL to re-push them.
/*![:version:] Query Code */, where [:version:] is a sequence of 5
digits representing the mysql server version(e.g /*!50200 ... */),
is a special comment that the query in it can be executed on those
servers whose versions are larger than the version appearing in the
comment. It leads to a security issue when slave's version is larger
than master's. A malicious user can improve his privileges on slaves.
Because slave SQL thread is running with SUPER privileges, so it can
execute queries that he/she does not have privileges on master.
This bug is fixed with the logic below:
- To replace '!' with ' ' in the magic comments which are not applied on
master. So they become common comments and will not be applied on slave.
- Example:
'INSERT INTO t1 VALUES (1) /*!10000, (2)*/ /*!99999 ,(3)*/
will be binlogged as
'INSERT INTO t1 VALUES (1) /*!10000, (2)*/ /* 99999 ,(3)*/
mysql-test/suite/rpl/t/rpl_conditional_comments.test:
Test the patch for this bug.
sql/mysql_priv.h:
Rename inBuf as rawBuf and remove the const limitation.
sql/sql_lex.cc:
To replace '!' with ' ' in the magic comments which are not applied on
master.
sql/sql_lex.h:
Remove the const limitation on parameter buff, as it can be modified in the function since
this patch.
Add member function yyUnput for Lex_input_stream. It set a character back the query buff.
sql/sql_parse.cc:
Rename inBuf as rawBuf and remove the const limitation.
sql/sql_partition.cc:
Remove the const limitation on parameter part_buff, as it can be modified in the function since
this patch.
sql/sql_partition.h:
Remove the const limitation on parameter part_buff, as it can be modified in the function since
this patch.
sql/table.h:
Remove the const limitation on variable partition_info, as it can be modified since
this patch.
This patch also fixes Bug#55452 "SET PASSWORD is
replicated twice in RBR mode".
The goal of this patch is to remove the release of
metadata locks from close_thread_tables().
This is necessary to not mistakenly release
the locks in the course of a multi-step
operation that involves multiple close_thread_tables()
or close_tables_for_reopen().
On the same token, move statement commit outside
close_thread_tables().
Other cleanups:
Cleanup COM_FIELD_LIST.
Don't call close_thread_tables() in COM_SHUTDOWN -- there
are no open tables there that can be closed (we leave
the locked tables mode in THD destructor, and this
close_thread_tables() won't leave it anyway).
Make open_and_lock_tables() and open_and_lock_tables_derived()
call close_thread_tables() upon failure.
Remove the calls to close_thread_tables() that are now
unnecessary.
Simplify the back off condition in Open_table_context.
Streamline metadata lock handling in LOCK TABLES
implementation.
Add asserts to ensure correct life cycle of
statement transaction in a session.
Remove a piece of dead code that has also become redundant
after the fix for Bug 37521.
mysql-test/r/variables.result:
Update results: set @@autocommit and statement transaction/
prelocked mode.
mysql-test/r/view.result:
A harmless change in CHECK TABLE <view> status for a broken view.
If previously a failure to prelock all functions used in a view
would leave the connection in LTM_PRELOCKED mode, now we call
close_thread_tables() from open_and_lock_tables()
and leave prelocked mode, thus some check in mysql_admin_table() that
works only in prelocked/locked tables mode is no longer activated.
mysql-test/suite/rpl/r/rpl_row_implicit_commit_binlog.result:
Fixed Bug#55452 "SET PASSWORD is replicated twice in
RBR mode": extra binlog events are gone from the
binary log.
mysql-test/t/variables.test:
Add a test case: set autocommit and statement transaction/prelocked
mode.
sql/event_data_objects.cc:
Simplify code in Event_job_data::execute().
Move sp_head memory management to lex_end().
sql/event_db_repository.cc:
Move the release of metadata locks outside
close_thread_tables().
Make sure we call close_thread_tables() when
open_and_lock_tables() fails and remove extra
code from the events data dictionary.
Use close_mysql_tables(), a new internal
function to properly close mysql.* tables
in the data dictionary.
Contract Event_db_repository::drop_events_by_field,
drop_schema_events into one function.
When dropping all events in a schema,
make sure we don't mistakenly release all
locks acquired by DROP DATABASE. These
include locks on the database name
and the global intention exclusive
metadata lock.
sql/event_db_repository.h:
Function open_event_table() does not require an instance
of Event_db_repository.
sql/events.cc:
Use close_mysql_tables() instead of close_thread_tables()
to bootstrap events, since the latter no longer
releases metadata locks.
sql/ha_ndbcluster.cc:
- mysql_rm_table_part2 no longer releases
acquired metadata locks. Do it in the caller.
sql/ha_ndbcluster_binlog.cc:
Deploy the new protocol for closing thread
tables in run_query() and ndb_binlog_index
code.
sql/handler.cc:
Assert that we never call ha_commit_trans/
ha_rollback_trans in sub-statement, which
is now the case.
sql/handler.h:
Add an accessor to check whether THD_TRANS object
is empty (has no transaction started).
sql/log.cc:
Update a comment.
sql/log_event.cc:
Since now we commit/rollback statement transaction in
mysql_execute_command(), we need a mechanism to communicate
from Query_log_event::do_apply_event() to mysql_execute_command()
that the statement transaction should be rolled back, not committed.
Ideally it would be a virtual method of THD. I hesitate
to make THD a virtual base class in this already large patch.
Use a thd->variables.option_bits for now.
Remove a call to close_thread_tables() from the slave IO
thread. It doesn't open any tables, and the protocol
for closing thread tables is more complicated now.
Make sure we properly close thread tables, however,
in Load_data_log_event, which doesn't
follow the standard server execution procedure
with mysql_execute_command().
@todo: this piece should use Server_runnable
framework instead.
Remove an unnecessary call to mysql_unlock_tables().
sql/rpl_rli.cc:
Update Relay_log_info::slave_close_thread_tables()
to follow the new close protocol.
sql/set_var.cc:
Remove an unused header.
sql/slave.cc:
Remove an unnecessary call to
close_thread_tables().
sql/sp.cc:
Remove unnecessary calls to close_thread_tables()
from SP DDL implementation. The tables will
be closed by the caller, in mysql_execute_command().
When dropping all routines in a database, make sure
to not mistakenly drop all metadata locks acquired
so far, they include the scoped lock on the schema.
sql/sp_head.cc:
Correct the protocol that closes thread tables
in an SP instruction.
Clear lex->sphead before cleaning up lex
with lex_end to make sure that we don't
delete the sphead twice. It's considered
to be "cleaner" and more in line with
future changes than calling delete lex->sphead
in other places that cleanup the lex.
sql/sp_head.h:
When destroying m_lex_keeper of an instruction,
don't delete the sphead that all lex objects
share.
@todo: don't store a reference to routine's sp_head
instance in instruction's lex.
sql/sql_acl.cc:
Don't call close_thread_tables() where the caller will
do that for us.
Fix Bug#55452 "SET PASSWORD is replicated twice in RBR
mode" by disabling RBR replication in change_password()
function.
Use close_mysql_tables() in bootstrap and ACL reload
code to make sure we release all metadata locks.
sql/sql_base.cc:
This is the main part of the patch:
- remove manipulation with thd->transaction
and thd->mdl_context from close_thread_tables().
Now this function is only responsible for closing
tables, nothing else.
This is necessary to be able to easily use
close_thread_tables() in procedures, that
involve multiple open/close tables, which all
need to be protected continuously by metadata
locks.
Add asserts ensuring that TABLE object
is only used when is protected by a metadata lock.
Simplify the back off condition of Open_table_context,
we no longer need to look at the autocommit mode.
Make open_and_lock_tables() and open_normal_and_derived_tables()
close thread tables and release metadata locks acquired so-far
upon failure. This simplifies their usage.
Implement close_mysql_tables().
sql/sql_base.h:
Add declaration for close_mysql_tables().
sql/sql_class.cc:
Remove a piece of dead code that has also become redundant
after the fix for Bug 37521.
The code became dead when my_eof() was made a non-protocol method,
but a method that merely modifies the diagnostics area.
The code became redundant with the fix for Bug#37521, when
we started to cal close_thread_tables() before
Protocol::end_statement().
sql/sql_do.cc:
Do nothing in DO if inside a substatement
(the assert moved out of trans_rollback_stmt).
sql/sql_handler.cc:
Add comments.
sql/sql_insert.cc:
Remove dead code.
Release metadata locks explicitly at the
end of the delayed insert thread.
sql/sql_lex.cc:
Add destruction of lex->sphead to lex_end(),
lex "reset" method called at the end of each statement.
sql/sql_parse.cc:
Move close_thread_tables() and other related
cleanups to mysql_execute_command()
from dispatch_command(). This has become
possible after the fix for Bug#37521.
Mark federated SERVER statements as DDL.
Next step: make sure that we don't store
eof packet in the query cache, and move
the query cache code outside mysql_parse.
Brush up the code of COM_FIELD_LIST.
Remove unnecessary calls to close_thread_tables().
When killing a query, don't report "OK"
if it was a suicide.
sql/sql_parse.h:
Remove declaration of a function that is now static.
sql/sql_partition.cc:
Remove an unnecessary call to close_thread_tables().
sql/sql_plugin.cc:
open_and_lock_tables() will clean up
after itself after a failure.
Move close_thread_tables() above
end: label, and replace with close_mysql_tables(),
which will also release the metadata lock
on mysql.plugin.
sql/sql_prepare.cc:
Now that we no longer release locks in close_thread_tables()
statement prepare code has become more straightforward.
Remove the now redundant check for thd->killed() (used
only by the backup project) from Execute_server_runnable.
Reorder code to take into account that now mysql_execute_command()
performs lex->unit.cleanup() and close_thread_tables().
sql/sql_priv.h:
Add a new option to server options to interact
between the slave SQL thread and execution
framework (hack). @todo: use a virtual
method of class THD instead.
sql/sql_servers.cc:
Due to Bug 25705 replication of
DROP/CREATE/ALTER SERVER is broken.
Make sure at least we do not attempt to
replicate these statements using RBR,
as this violates the assert in close_mysql_tables().
sql/sql_table.cc:
Do not release metadata locks in mysql_rm_table_part2,
this is done by the caller.
Do not call close_thread_tables() in mysql_create_table(),
this is done by the caller.
Fix a bug in DROP TABLE under LOCK TABLES when,
upon error in wait_while_table_is_used() we would mistakenly
release the metadata lock on a non-dropped table.
Explicitly release metadata locks when doing an implicit
commit.
sql/sql_trigger.cc:
Now that we delete lex->sphead in lex_end(),
zero the trigger's sphead in lex after loading
the trigger, to avoid double deletion.
sql/sql_udf.cc:
Use close_mysql_tables() instead of close_thread_tables().
sql/sys_vars.cc:
Remove code added in scope of WL#4284 which would
break when we perform set @@session.autocommit along
with setting other variables and using tables or functions.
A test case added to variables.test.
sql/transaction.cc:
Add asserts.
sql/tztime.cc:
Use close_mysql_tables() rather than close_thread_tables().
Problem: when SHOW BINLOG EVENTS was issued, it increased the value of
@@session.max_allowed_packet. This allowed a non-root user to increase
the amount of memory used by her thread arbitrarily. Thus, it removes
the bound on the amount of system resources used by a client, so it
presents a security risk (DoS attack).
Fix: it is correct to increase the value of @@session.max_allowed_packet
while executing SHOW BINLOG EVENTS (see BUG 30435). However, the
increase should only be temporary. Thus, the fix is to restore the value
when SHOW BINLOG EVENTS ends.
The value of @@session.max_allowed_packet is also increased in
mysql_binlog_send (i.e., the binlog dump thread). It is not clear if this
can cause any trouble, since normally the client that issues
COM_BINLOG_DUMP will not issue any other commands that would be affected
by the increased value of @@session.max_allowed_packet. However, we
restore the value just in case.
mysql-test/suite/rpl/r/rpl_packet.result:
update result file
mysql-test/suite/rpl/t/rpl_packet.test:
Add test that verifies that @@session.max_allowed_packet does not change
when issuing SHOW BINLOG EVENTS.
Make previous sub-test clean up.
Add comments listing the bugs in this test case.
sql/sql_repl.cc:
Restore the old value of thd->variables.max_allowed_packet at the
end of mysql_binlog_send and mysql_show_binlog_events.
DROP USER
RENAME USER CURRENT_USER() ...
GRANT ... TO CURRENT_USER()
REVOKE ... FROM CURRENT_USER()
ALTER DEFINER = CURRENT_USER() EVENTbut, When these statements are binlogged, CURRENT_USER() just is binlogged
as 'CURRENT_USER()', it is not expanded to the real user name. When slave
executes the log event, 'CURRENT_USER()' is expand to the user of slave
SQL thread, but SQL thread's user name always NULL. This breaks the replication.
After this patch, session's user will be written into query log events
if these statements call CURREN_USER() or 'ALTER EVENT' does not assign a definer.
mysql-test/include/diff_tables.inc:
Expend its abilities.
Now it can diff not only in sessions of 'master' and 'slave', but
other sessions as well.
sql/log_event.cc:
session's user will be written into Query_log_event, if is_current_user_used() is TRUE.
On slave SQL thread, Only thd->invoker is written into Query_log_event,
if it exists.
sql/sql_acl.cc:
On slave SQL thread, grantor should copy from thd->invoker, if it exists
sql/sql_class.h:
On slave SQL thread, thd->invoker is used to store the applying event's
invoker.
BUG#54872 MBR: replication failure caused by using tmp table inside transaction
Changed criteria to classify a statement as unsafe in order to reduce the
number of spurious warnings. So a statement is classified as unsafe when
there is on-going transaction at any point of the execution if:
1. The mixed statement is about to update a transactional table and
a non-transactional table.
2. The mixed statement is about to update a temporary transactional
table and a non-transactional table.
3. The mixed statement is about to update a transactional table and
read from a non-transactional table.
4. The mixed statement is about to update a temporary transactional
table and read from a non-transactional table.
5. The mixed statement is about to update a non-transactional table
and read from a transactional table when the isolation level is
lower than repeatable read.
After updating a transactional table if:
6. The mixed statement is about to update a non-transactional table
and read from a temporary transactional table.
7. The mixed statement is about to update a non-transactional table
and read from a temporary transactional table.
8. The mixed statement is about to update a non-transactionala table
and read from a temporary non-transactional table.
9. The mixed statement is about to update a temporary non-transactional
table and update a non-transactional table.
10. The mixed statement is about to update a temporary non-transactional
table and read from a non-transactional table.
11. A statement is about to update a non-transactional table and the
option variables.binlog_direct_non_trans_update is OFF.
The reason for this is that locks acquired may not protected a concurrent
transaction of interfering in the current execution and by consequence in
the result. So the patch reduced the number of spurious unsafe warnings.
Besides we fixed a regression caused by BUG#51894, which makes temporary
tables to go into the trx-cache if there is an on-going transaction. In
MIXED mode, the patch for BUG#51894 ignores that the trx-cache may have
updates to temporary non-transactional tables that must be written to the
binary log while rolling back the transaction.
So we fix this problem by writing the content of the trx-cache to the
binary log while rolling back a transaction if a non-transactional
temporary table was updated and the binary logging format is MIXED.
switching binlog format to ROW
BUG 52616 fixed the case which the user would switch from STMT to
ROW binlog format, but the server would silently ignore it. After
that fix thd->is_current_stmt_binlog_format_row() reports correct
value at logging time and events are logged in ROW (as expected)
instead of STMT as they were previously and wrongly logged.
However, the fix was only partially complete, because on
disconnect, at THD cleanup, the implicit logging of temporary
tables is conditionally performed. If the binlog_format==ROW and
thd->is_current_stmt_binlog_format_row() is true then DROPs are
not logged. Given that the user can switch from STMT to ROW, this
is wrong because the server cannot tell, just by relying on the
ROW binlog format, that the tables have been dropped before. This
is effectively similar to the MIXED scenario when a switch from
STMT to ROW is triggered.
We fix this by removing this condition from
close_temporary_tables.
mysql-test/extra/binlog_tests/drop_temp_table.test:
Added binlog test case.
mysql-test/suite/binlog/r/binlog_row_drop_tmp_tbl.result:
Result changes because:
- there is a missing drop on three temporary tables
- it now contains results for the test added
mysql-test/suite/binlog/r/binlog_row_mix_innodb_myisam.result:
Result now contains the implicit drop for the temporary table.
mysql-test/suite/binlog/r/binlog_stm_drop_tmp_tbl.result:
Result file changed because it now contains results for added
test case.
mysql-test/suite/rpl/r/rpl_drop_temp.result:
Result file changed because it now contains results for added
test case.
mysql-test/suite/rpl/t/rpl_drop_temp.test:
Added replication test case.
sql/sql_base.cc:
Removed the condition that would make the server to skip
logging implicit drops when ROW binary log format mode was
in use.
Additionally, deployed DBUG_ENTER/RETURN macros.
DROP USER
RENAME USER CURRENT_USER() ...
GRANT ... TO CURRENT_USER()
REVOKE ... FROM CURRENT_USER()
ALTER DEFINER = CURRENT_USER() EVENTbut, When these statements are binlogged, CURRENT_USER() just is binlogged
as 'CURRENT_USER()', it is not expanded to the real user name. When slave
executes the log event, 'CURRENT_USER()' is expand to the user of slave
SQL thread, but SQL thread's user name always NULL. This breaks the replication.
After this patch, session's user will be written into query log events
if these statements call CURREN_USER() or 'ALTER EVENT' does not assign a definer.
mysql-test/include/diff_tables.inc:
Expend its abilities.
Now it can diff not only in sessions of 'master' and 'slave', but
other sessions as well.
mysql-test/include/rpl_diff_tables.inc:
Diff the same table between master and slaves.
sql/log_event.cc:
session's user will be written into Query_log_event, if is_current_user_used() is TRUE.
On slave SQL thread, Only thd->variables.current_user is written into Query_log_event,
if it exists.
sql/sql_acl.cc:
On slave SQL thread, grantor should copy from thd->variables.current_user, if it exists
sql/sql_class.h:
On slave SQL thread, thd->variables.current_user is used to store the applying event's
invoker.
DML flow and SAVEPOINT
The problem was that replication could break if a transaction involving
both transactional and non-transactional tables was rolled back to a
savepoint. It broke if a concurrent connection tried to drop a
transactional table which was locked after the savepoint was set.
This DROP TABLE completed when ROLLBACK TO SAVEPOINT was executed as the
lock on the table was dropped by the transaction. When the slave later
tried to apply the binlog, it would fail as the table would already
have been dropped.
The reason for the problem is that transactions involving both
transactional and non-transactional tables are written fully to the
binlog during ROLLBACK TO SAVEPOINT. At the same time, metadata locks
acquired after a savepoint, were released during ROLLBACK TO SAVEPOINT.
This allowed a second connection to drop a table only used between
SAVEPOINT and ROLLBACK TO SAVEPOINT. Which caused the transaction binlog
to refer to a non-existing table when it was written during ROLLBACK
TO SAVEPOINT.
This patch fixes the problem by not releasing metadata locks when
ROLLBACK TO SAVEPOINT is executed if binlogging is enabled.
The default storage engine is changed from MyISAM to
InnoDB, in all builds except for the embedded server.
In addition, the following system variables are
changed:
* innodb_file_per_table is enabled
* innodb_strict_mode is enabled
* innodb_file_format_name_update is changed
to 'Barracuda'
The test suite is changed so that tests that do not
explicitly include the have_innodb.inc are run with
--default-storage-engine=MyISAM. This is to ease the
transition, so that most regression tests are run
with the same engine as before.
Some tests are disabled for the embedded server
regression test, as the output of certain statements
will be different that for the regular server
(i.e SELECT @@default_storage_engine). This is to
ease transition.
mysql-test/mysql-test-run.pl:
The regression test suite now adds a
--default-storage-engine=MyISAM for all non-innodb
tests. This behaviour can be controlled by the
default-myisam switch in mysql-test-run
mysql-test/t/bootstrap-master.opt:
The bootstrap test can only be run without InnoDB
as it starts several mysqld instances on the same
datadir. This is possible with MyISAM, but not
with InnoDB.
storage/innobase/CMakeLists.txt:
Build InnoDB per default
storage/innobase/handler/ha_innodb.cc:
Change default values for system variables
Enable file_per_table
Enable strict_mode
Upgrade default file format to Barracuda
locks for DML statements and changes the way MDL locks
are acquired/granted in contended case.
Instead of backing-off when a lock conflict is encountered
and waiting for it to go away before restarting open_tables()
process we now wait for lock to be released without releasing
any previously acquired locks. If conflicting lock goes away
we resume opening tables. If waiting leads to a deadlock we
try to resolve it by backing-off and restarting open_tables()
immediately.
As result both waiting for possibility to acquire and
acquiring of a metadata lock now always happen within the
same MDL API call. This has allowed to make release of a lock
and granting it to the most appropriate pending request an
atomic operation.
Thanks to this it became possible to wake up during release
of lock only those waiters which requests can be satisfied
at the moment as well as wake up only one waiter in case
when granting its request would prevent all other requests
from being satisfied. This solves thundering herd problem
which occured in cases when we were releasing some lock and
woke up many waiters for SNRW or X locks (this was the issue
in bug#52289 "performance regression for MyISAM in sysbench
OLTP_RW test".
This also allowed to implement more fair (FIFO) scheduling
among waiters with the same priority.
It also opens the door for introducing new types of requests
for metadata locks such as low-prio SNRW lock which is
necessary in order to support LOCK TABLES LOW_PRIORITY WRITE.
Notice that after this sometimes can report ER_LOCK_DEADLOCK
error in cases in which it has not happened before.
Particularly we will always report this error if waiting for
conflicting lock has happened in the middle of transaction
and resulted in a deadlock. Before this patch the error was
not reported if deadlock could have been resolved by backing
off all metadata locks acquired by the current statement.
mysql-test/r/mdl_sync.result:
Added test coverage for some aspects of deadlock handling in
metadata locking subsystem.
Adjusted test case after removing back-off in general case
when conflicting metadata lock is encountered during
open_tables() (now this happens only if waiting for
conflicting lock to go away leads to a deadlock).
mysql-test/r/sp_sync.result:
Adjusted test case after removing back-off in general case
when conflicting metadata lock is encountered during
open_tables() (now this happens only if waiting for
conflicting lock to go away leads to a deadlock).
mysql-test/suite/perfschema/r/dml_setup_instruments.result:
Adjusted test results after renaming MDL_context::
m_waiting_for_lock rwlock to m_LOCK_waiting_for.
mysql-test/suite/rpl/r/rpl_sp.result:
Adjusted test case after implementing new approach to
acquiring metadata locks in open_tables(). We no longer
release all MDL locks acquired by statement before waiting
for conflicting lock to go away. As result DROP FUNCTION
statement has to wait for DML statement which managed to
acquire metadata lock on function being dropped and now
waits for other conflicting metadata lock to go away.
mysql-test/suite/rpl/t/rpl_sp.test:
Adjusted test case after implementing new approach to
acquiring metadata locks in open_tables(). We no longer
release all MDL locks acquired by statement before waiting
for conflicting lock to go away. As result DROP FUNCTION
statement has to wait for DML statement which managed to
acquire metadata lock on function being dropped and now
waits for other conflicting metadata lock to go away.
mysql-test/t/mdl_sync.test:
Added test coverage for some aspects of deadlock handling in
metadata locking subsystem.
Adjusted test case after removing back-off in general case
when conflicting metadata lock is encountered during
open_tables() (now this happens only if waiting for
conflicting lock to go away leads to a deadlock).
mysql-test/t/sp_sync.test:
Adjusted test case after removing back-off in general case
when conflicting metadata lock is encountered during
open_tables() (now this happens only if waiting for
conflicting lock to go away leads to a deadlock).
sql/mdl.cc:
Changed MDL subsystem to support new approach to acquring
metadata locks in open tables and more fair and efficient
scheduling of metadata locks. To implement this:
- Made releasing of the lock and granting it to the most
appropriate pending request atomic operation. As result it
became possible to wake up only those waiters requests from
which can be satisfied at the moment as well as wake-up
only one waiter in case when granting its request would
prevent all other requests from being satisfied.
This solved thundering herd problem which occured in cases
when we were releasing some lock and woke up many waiters
for SNRW or X locks (this was the issue in Bug #52289
"performance regression for MyISAM in sysbench OLTP_RW
test".
To emphasize above changes wake_up_waiters() was renamed
to MDL_context::reschedule_waiters().
- Changed code to add tickets for new requests to the back of
waiters queue and to select tickets to be satisfied from
the head of the queue if possible (this makes scheduling of
requests with the same priority fair). To be able to do
this efficiently we now use for waiting and granted queues
version of I_P_List class which provides fast push_back()
method.
- Members and methods of MDL_context related to sending
and waiting for signal were moved to separate MDL_wait
class.
- Since in order to avoid race conditions we must grant the
lock only to the context which was not chosen as a victim
of deadlock, killed or aborted due to timeout
MDL_wait::set_status() (former awake()) was changed not to
send signal if signal slot is already occupied and to
indicate this fact through its return value. As another
consequence MDL_wait::timed_wait() method was changed to
handle timeout (optionally) and abort due to kill as
signals which make signal slot occupied.
- Renamed MDL_context::acquire_lock_impl() to acquire_lock().
Changed it to be able correctly process requests for shared
locks when there are open HANDLERs, made this method more
optimized for acquisition of shared locks. As part of this
change moved code common between try_acquire_lock() and
acquire_lock() to new try_acquire_lock_impl() method.
Also adjusted acquire_lock()'s code to take into account
the fact that in cases when lock is granted as result of
MDL_context::reschedule_waiters() call (i.e. when it is
granted after waiting for lock conflict to go away)
updating MDL_lock state is responsibility of the thread
calling reschedule_waiters().
- Changed MDL_context::find_deadlock() to send VICTIM
signal even if victim is the context which has initiated
deadlock detection. This is required in order to avoid
races in cases when the same context simultaneously is
chosen as a victim and its request for lock is satisfied.
As result return value of this method became unnecessary
and it was changed to return void.
Adjusted MDL_lock::find_deadlock() method to take into
account that now there can be a discrepancy between
MDL_context::m_waiting_for value being set and real state
of the ticket this member points to.
- Renamed MDL_context::m_waiting_for_lock to m_LOCK_waiting_for
and MDL_context::stop_waiting() to done_waiting_for().
- Finally, removed MDL_context::wait_for_lock() method.
sql/mdl.h:
Changed MDL subsystem to support new approach to acquring
metadata locks in open tables and more fair and efficient
scheduling of metadata locks. To implement this:
- Members and methods of MDL_context related to sending
and waiting for signal were moved to separate MDL_wait
class.
- Since now in order to avoid race conditions we must grant
the lock only to the context which was not chosen as a
victim of deadlock, killed or aborted due to timeout
MDL_wait::set_status (former awake()) was changed not to
send signal if signal slot is already occupied and to
indicate this fact through its return value.
Also NORMAL_WAKE_UP signal became GRANTED, and timeouts
and aborts due to kill became full blown signals rather
than simple return values.
- MDL_wait::timed_wait() now takes extra parameter that
indicates whether signal should be set if timeout is
reached.
- Enabled fast push_back() operation in MDL_context::m_tickets
list to make move_ticket_after_trans_sentinel() method more
efficient.
- Removed MDL_context::wait_for_lock() method.
- Renamed MDL_context::m_waiting_for_lock to m_LOCK_waiting_for
and MDL_context::stop_waiting() to done_waiting_for().
- MDL_context::acquire_lock_impl() became acquire_lock().
- Introduced MDL_context::try_acquire_lock_impl() as a
place for code shared by try_acquire_lock and
acquire_lock().
- Due to fact that now VICTIM signal is sent even if victim
is the context which has initiated deadlock detection
find_deadlock() no longer needs a return value.
sql/sql_base.cc:
Implemented new approach to acquiring metadata locks in
open_tables(). We no longer perform back-off when conflicting
metadata lock is encountered. Instead we wait for this lock
to go away while holding all locks which were acquired so
far. Back-off is only used in situation when further waiting
will cause a deadlock which could be avoided by performing
back-off and restarting open_tables() process. Absence of
waiting between back-off and restart of acquiring metadata
locks can't lead to livelocks as MDL subsystem was changed
to make release of lock and granting it to waiting lock
an atomic action, so back-off will automatically give way
to other participants of deadlock loop.
Accordingly:
- open_table_get_mdl_lock() and open_and_process_routine()
were changed to wait for conflicting metadata lock to
go away without back-off. Only if such wait leads to a
deadlock back-off is requested. As part of this change
new error handler class was introduced which converts,
if possible, ER_LOCK_DEADLOCK error to a request for
back-off and re-start of open_tables() process.
- Open_table_context::recover_from_failed_open() was changed
not to wait in case of metadata lock conflict. Instead we
immediately proceed to re-acquiring locks.
- Open_table_context::request_backoff_action() now always
emits error if back-off is requested in the middle of
transaction as we can't be sure that releasing lock
which were acquired only by current statement will
resolve a deadlock. Before this patch such situations were
successfully detected thanks to the fact that we called
MDL_context::wait_for_lock() method in
recover_from_failed_open().
- In order to avoid deadlocks open_tables() code was adjusted
to flush open HANDLERs for which there are pending requests
for X locks before restarting the process of acquiring
metadata locks.
- Changed close_tables_for_reopen() not to reset MDL_request
for tables belonging to the tail of prelocking list. It is
no longer necessary as these MDL_request objects won't be
used for any waiting.
- Adjusted comment in tdc_wait_for_old_version() to avoid
mentioning removed MDL_context::wait_for_lock() method.
sql/sql_base.h:
As we no longer wait for conflicting metadata lock away in
Open_table_context::recover_from_failed_open() method,
Open_table_context::OT_WAIT_MDL_LOCK action was renamed to
OT_MDL_CONFLICT.
Also Open_table_context::m_failed_mdl_request became
unnecessary and was removed.
sql/sql_plist.h:
Extended I_P_List template to support efficient push_back()
operation if it is parameterized with an appropriate policy
class.
sql/sql_show.cc:
Adjusted code after removal of MDL_context::wait_for_lock()
method. Now if one needs to acquire metadata lock with waiting
one has to use a variant of MDL_context::acquire_lock() method.
When using Unique Keys with nullable parts in RBR, the slave can
choose the wrong row to update. This happens because a table with
an unique key containing nullable parts cannot strictly guarantee
uniqueness. As stated in the manual, for all engines, a UNIQUE
index allows multiple NULL values for columns that can contain
NULL.
We fix this at the slave by extending the checks before assuming
that the row found through an unique index is is the correct
one. This means that when a record (R) is fetched from the storage
engine and a key that is not primary (K) is used, the server does
the following:
- If K is unique and has no nullable parts, it returns R;
- Otherwise, if any field in the before image that is part of K
is null do an index scan;
- If there is no NULL field in the BI part of K, then return R.
A side change: renamed the existing test case file and added a
test case covering the changes in this patch.
errors
In the fix of BUG#39934 in 5.1-rep+3, errors are generated when
binlog_format=row and a statement modifies a table restricted to
statement-logging (ER_BINLOG_ROW_MODE_AND_STMT_ENGINE); or if
binlog_format=statement and a statement modifies a table restricted to
row-logging (ER_BINLOG_STMT_MODE_AND_ROW_ENGINE).
However, some DDL statements that lock tables (e.g. ALTER TABLE,
CREATE INDEX and CREATE TRIGGER) were causing spurious errors,
although no row might be inserted into the binary log.
To fix the problem, we tagged statements that may generate
rows into the binary log and thence the warning messages are
only printed out when the appropriate conditions hold and rows
might be changed.
sql/log_event.cc:
Reorganized the Query_log_event's constructor based on the
CF_CAN_GENERATE_ROW_EVENTS flag and as such any statement
that has the associated flag should go through a cache
before being written to the binary log.
sql/share/errmsg-utf8.txt:
Improved the error message ER_BINLOG_UNSAFE_MIXED_STATEMENT according to Paul's
suggestion.
sql/sql_class.cc:
Created a hook to be used by innodb that checks if a statement
may write rows to the binary log. In other words, if it has
the CF_CAN_GENERATE_ROW_EVENTS flag associated.
sql/sql_class.h:
Defined the CF_CAN_GENERATE_ROW_EVENTS flag.
sql/sql_parse.cc:
Updated the sql_command_flags and added a function to check the
CF_CAN_GENERATE_ROW_EVENTS.
sql/sql_parse.h:
Added a function to check the CF_CAN_GENERATE_ROW_EVENTS.
storage/innobase/handler/ha_innodb.cc:
Added a call to the hook thd_generates_rows().
storage/innobase/handler/ha_innodb.h:
Defined an external reference to the hook thd_generates_rows().
breaks
When a "CREATE TEMPORARY TABLE SELECT * FROM" was executed the OPTION_KEEP_LOG was
not set into the thd->variables.option_bits. For that reason, if the transaction
had updated only transactional engines and was rolled back at the end (.e.g due to
a deadlock) the changes were not written to the binary log, including the creation
of the temporary table.
To fix the problem, we have set the OPTION_KEEP_LOG into the
thd->variables.option_bits when a "CREATE TEMPORARY TABLE
SELECT * FROM" is executed.
Add code to waiting for a set of errors.
Add code to waiting for an error instead of waiting for io thread to stop, as
after 'START SLAVE', the status of io thread is still not running.
But it doesn't mean slave io thread encounters an error.
The thd->variables.option_bits & OPTION_BIN_LOG is currently abused:
it's both a system variable and an implementation switch. The current
approach to this option bit breaks the session variable encapsulation.
Besides it is allowed to change @@session.sql_bin_log within a
transaction what may lead to not correctly logging a transaction.
To fix the problems, we created a thd->variables variable to represent
the "sql_log_bin" and prohibited its update inside a transaction or
sub-statement.
mysql-test/suite/binlog/r/binlog_stm_unsafe_warning.result:
Updated result file. The reason the warnings are removed is
related to BUG#50312.
mysql-test/suite/binlog/r/binlog_switch_inside_trans.result:
Checks when is possible to change the option @@session.sql_log_bin.
mysql-test/suite/binlog/t/binlog_switch_inside_trans.test:
Checks when is possible to change the option @@session.sql_log_bin.
mysql-test/suite/rpl/r/rpl_non_direct_stm_mixing_engines.result:
Updated the result file with warnings that were being printed
due to the wrong use of the thd->variables.option_bits and
sql_log_bin_top_level variables.
mysql-test/suite/rpl/r/rpl_stm_mixing_engines.result:
Updated the result file with warnings that were being printed
due to the wrong use of the thd->variables.option_bits and
sql_log_bin_top_level variables.
sql/share/errmsg-utf8.txt:
Introduces two error messages to notify that the @@session.sql_log_bin
cannot be changed inside a sub-statement or transaction.
sql/sql_base.cc:
Removes the variable sql_log_bin_toplevel and uses
the session variable sql_log_bin.
sql/sql_class.cc:
Replaces the variable sql_log_bin_toplevel by the
(variables.option_bits & OPTION_BIN_LOG).
sql/sql_class.h:
Removes the variable sql_log_bin_toplevel and creates
a session variable sql_log_bin.
sql/sys_vars.cc:
Checks when the sql_log_bin can be correctly updated.
Some of the test cases reference to binlog position and
these position numbers are written into result explicitly.
It is difficult to maintain if log event format changes.
There are a couple of cases explicit position number appears,
we handle them in different ways
A. 'CHANGE MASTER ...' with MASTER_LOG_POS or/and RELAY_LOG_POS options
Use --replace_result to mask them.
B. 'SHOW BINLOG EVENT ...'
Replaced by show_binlog_events.inc or wait_for_binlog_event.inc.
show_binlog_events.inc file's function is enhanced by given
$binlog_file and $binlog_limit.
C. 'SHOW SLAVE STATUS', 'show_slave_status.inc' and 'show_slave_status2.inc'
For the test cases just care a few items in the result of 'SHOW SLAVE STATUS',
only the items related to each test case are showed.
'show_slave_status.inc' is rebuild, only the given items in $status_items
will be showed.
'check_slave_is_running.inc' and 'check_slave_no_error.inc'
and 'check_slave_param.inc' are auxiliary files helping
to show running status and error information easily.
mysql-test/extra/binlog_tests/binlog.test:
It only cares whether current binlog file index is changed, so it is ok
with 'show_master_status.inc' instead of 'show mater status'.
mysql-test/extra/binlog_tests/blackhole.test:
Use 'show_binlog_events.inc' instead of 'show binlog events' statement.
mysql-test/extra/rpl_tests/rpl_deadlock.test:
Use 'check_slave_is_running.inc' instead of 'show_slave_status2.inc'.
mysql-test/extra/rpl_tests/rpl_extraMaster_Col.test:
Use 'check_slave_is_running.inc' instead of 'show slave status' statement.
mysql-test/extra/rpl_tests/rpl_extraSlave_Col.test:
Use 'wait_for_slave_sql_error.inc' and 'ait_for_slave_sql_error_and_skip.inc' instead of 'show slave status'.
mysql-test/extra/rpl_tests/rpl_flsh_tbls.test:
Use 'show_binlog_events.inc' instead of 'show binlog events' statement.
mysql-test/extra/rpl_tests/rpl_get_master_version_and_clock.test:
It is need now to give a error number, so use 'wait_for_slave_io_to_stop.inc'
instead of 'wait_for_slave_io_error.inc'.
mysql-test/extra/rpl_tests/rpl_insert_delayed.test:
Use 'show_binlog_events.inc' instead of 'show binlog events' statement.
mysql-test/extra/rpl_tests/rpl_log.test:
Use 'show_binlog_events.inc' instead of 'show binlog events' statement.
se 'check_slave_is_running.inc' instead of 'show slave status' statement.
mysql-test/extra/rpl_tests/rpl_max_relay_size.test:
se 'check_slave_is_running.inc' instead of 'show slave status' statement.
mysql-test/extra/rpl_tests/rpl_ndb_apply_status.test:
Use 'show_binlog_events.inc' instead of 'show binlog events' statement.
mysql-test/extra/rpl_tests/rpl_reset_slave.test:
Use 'show_slave_status.inc' instead of 'show_slave_status2.inc' statement.
Use 'check_slave_no_error.inc' to simplify the check that there is no error.
mysql-test/extra/rpl_tests/rpl_row_basic.test:
Use 'check_slave_is_running.inc' to verify that Slave threads are running well.
Use 'wait_for_slave_sql_error.inc' to wait the given sql thread error happening.
mysql-test/extra/rpl_tests/rpl_row_tabledefs.test:
Use 'show_slave_error_status_and_skip.inc' instead of 'show slave status'.
mysql-test/include/check_slave_is_running.inc:
To make sure both sql and io thread are running well. If not, the test will be aborted.
mysql-test/include/check_slave_no_error.inc:
To make sure both sql and io thread have no error. If not, the test will be aborted.
mysql-test/include/get_relay_log_pos.inc:
According to the position of a log event in master binlog file,
find the peer position of a log event in relay log file.
mysql-test/include/rpl_stmt_seq.inc:
Use 'show_binlog_events.inc' instead of 'show binlog events' statement.
mysql-test/include/show_binlog_events.inc:
Add two options $binlog_file and $binlog_limit for showing binlog events from different binlog files or/and given different limits on position or row number.
mysql-test/include/show_rpl_debug_info.inc:
Add 'SELECT NOW()' in the debug information.
mysql-test/include/show_slave_status.inc:
It's more clean and tidy Only the given columns of slave status are printed.
mysql-test/include/test_fieldsize.inc:
Use 'wait_for_slave_sql_error.inc' to wait the given sql thread error happening.
There is no need to print the result of 'show slave stutus'.
mysql-test/include/wait_for_binlog_event.inc:
Use show_rpl_debug_info.inc instead of 'SHOW BINLOG EVENTS'.
mysql-test/include/wait_for_slave_io_error.inc:
Add $slave_io_errno and $show_slave_io_error, it waits only a given error.
mysql-test/include/wait_for_slave_param.inc:
Use die instead of exit.
mysql-test/include/wait_for_slave_sql_error.inc:
Add $slave_sql_errno and $show_slave_sql_error, it waits only a given error.
mysql-test/include/wait_for_status_var.inc:
Use die instead of exit.
mysql-test/r/flush_block_commit_notembedded.result:
It checks whether somethings are binlogged, so we using 'show_binlog_event.inc' instead of 'show master status'.
mysql-test/r/multi_update.result:
It checks whether somethings are binlogged, so we using 'show_binlog_event.inc' instead of 'show master status'.
mysql-test/suite/binlog/r/binlog_innodb.result:
It checks whether somethings are binlogged, so we using 'show_binlog_event.inc' instead of 'show master status'.
mysql-test/suite/binlog/r/binlog_row_binlog.result:
Position in the result of 'show master status' is replaced by '#'.
mysql-test/suite/binlog/r/binlog_stm_binlog.result:
Position in the result of 'show master status' is replaced by '#'.
mysql-test/suite/binlog/t/binlog_innodb.test:
It checks whether somethings are binlogged, so we use 'show_binlog_event.inc' instead of 'show master status'.
mysql-test/suite/binlog/t/binlog_stm_binlog.test:
Use 'show_binlog_events.inc' instead of 'show binlog events' statement.
mysql-test/suite/bugs/r/rpl_bug36391.result:
Position in the result of 'show master status' is replaced by '#'.
mysql-test/suite/bugs/t/rpl_bug12691.test:
Use 'show_binlog_events.inc' instead of 'show binlog events' statement.
mysql-test/suite/bugs/t/rpl_bug36391.test:
'show master status' is replaced by 'show_master_status.inc'.
Position in the result of 'show master status' is replaced by '#'.
mysql-test/suite/engines/funcs/r/rpl_000015.result:
It checks whether somethings are binlogged,
so we using 'show_binlog_event.inc' instead of 'show master status'.
mysql-test/suite/engines/funcs/t/rpl_000015.test:
Use 'check_slave_is_running.inc' to verify that Slave threads are running well.
mysql-test/suite/engines/funcs/t/rpl_REDIRECT.test:
Use 'query_vertical SHOW SLAVE STATUS' instead of 'show slave status'.
There is no status columns in the result file, for no slave exists on master's server.
mysql-test/suite/engines/funcs/t/rpl_change_master.test:
This test just care whether Read_Master_Log_Pos is equal to Exec_Master_Log_Pos after 'CHANGE MASTER ..'. So 'show slave status' is removed and just check the value of Read_Master_Log_Pos and Exec_Master_Log_Pos.
mysql-test/suite/engines/funcs/t/rpl_empty_master_crash.test:
We doesn't really need the statement.
mysql-test/suite/engines/funcs/t/rpl_flushlog_loop.test:
Just show Relay_Log_File, running status and error informations.
Use 'check_slave_is_running.inc' to verify that Slave threads are running well.
mysql-test/suite/engines/funcs/t/rpl_loaddata_s.test:
Use 'show_binlog_events.inc' instead of 'show binlog events' statement.
mysql-test/suite/engines/funcs/t/rpl_log_pos.test:
Mask the explicit positions in the result file.
Use 'check_slave_no_error.inc' to simplify the check that there is no error.
Use 'wait_for_slave_sql_error.inc' to wait the given sql thread error happening.
There is no need to print the result of 'show slave stutus'.
mysql-test/suite/engines/funcs/t/rpl_rbr_to_sbr.test:
Use 'show_binlog_events.inc' instead of 'show binlog events' statement.
mysql-test/suite/engines/funcs/t/rpl_row_drop.test:
Use 'show_binlog_events.inc' instead of 'show binlog events' statement.
mysql-test/suite/engines/funcs/t/rpl_row_inexist_tbl.test:
Use 'wait_for_slave_sql_error.inc' to wait the given sql thread error happening.
There is no need to print the result of 'show slave stutus'.
mysql-test/suite/engines/funcs/t/rpl_row_until.test:
Use 'check_slave_param.inc' to check whether SQL Thread stop at a right position, and use binlog position variables instead of explicit number in the 'CHANGE MASTER' statements.
Mask the explicit binary log positions in the result file.
mysql-test/suite/engines/funcs/t/rpl_server_id1.test:
Use 'wait_for_slave_sql_error.inc' to wait the given sql thread error happening.
There is no need to print the result of 'show slave stutus'.
Use 'check_slave_no_error.inc' to simplify the check that there is no error.
mysql-test/suite/engines/funcs/t/rpl_server_id2.test:
It doesn't really need in this test.
mysql-test/suite/engines/funcs/t/rpl_slave_status.test:
Use 'wait_for_slave_sql_error.inc' to wait the given sql thread error happening.
There is no need to print the result of 'show slave stutus'.
mysql-test/suite/engines/funcs/t/rpl_switch_stm_row_mixed.test:
Use 'show_binlog_events.inc' instead of 'show binlog events' statement.
mysql-test/suite/manual/t/rpl_replication_delay.test:
Use 'show_slave_status.inc' instead of 'show slave status'.
mysql-test/suite/parts/t/rpl_partition.test:
Use 'check_slave_is_running.inc' instead of 'show slave status' statement.
mysql-test/suite/rpl/include/rpl_mixed_ddl.inc:
Use 'show_binlog_events.inc' instead of 'show binlog events' statement.
mysql-test/suite/rpl/include/rpl_mixed_dml.inc:
Use 'show_binlog_events.inc' instead of 'show binlog events' statement.
mysql-test/suite/rpl/t/rpl_000015.test:
Use 'show_slave_status.inc' instead of 'show_slave_status2.inc'.
mysql-test/suite/rpl/t/rpl_binlog_grant.test:
Use 'wait_for_binlog_event.inc' instead of 'show binlog events' statement.
mysql-test/suite/rpl/t/rpl_bug33931.test:
Use 'wait_for_slave_sql_error.inc' to wait the given sql thread error happening.
There is no need to print the result of 'show slave stutus'.
mysql-test/suite/rpl/t/rpl_change_master.test:
This test just care whether Read_Master_Log_Pos is equal to Exec_Master_Log_Pos after 'CHANGE MASTER ..'. So 'show slave status' is removed and just check the value of Read_Master_Log_Pos and Exec_Master_Log_Pos.
mysql-test/suite/rpl/t/rpl_critical_errors.test:
Use 'wait_for_slave_sql_error.inc' to wait the given sql thread error happening.
There is no need to print the result of 'show slave stutus'.
mysql-test/suite/rpl/t/rpl_dual_pos_advance.test:
Mask the explicit position numbers in result file.
It is restricted running on SBR, for it want to binlog 'set @a=1' statement.
mysql-test/suite/rpl/t/rpl_empty_master_crash.test:
It doesn't need in this test.
mysql-test/suite/rpl/t/rpl_flushlog_loop.test:
UUse 'check_slave_is_running.inc' and 'show_slave_status.inc' instead of 'show slave status' statement.
mysql-test/suite/rpl/t/rpl_get_master_version_and_clock.test:
Use 'wait_for_slave_io_error.inc' to wait the given io thread error happening.
mysql-test/suite/rpl/t/rpl_grant.test:
It doesn't need in this test.
mysql-test/suite/rpl/t/rpl_incident.test:
Use 'check_slave_is_running.inc' instead of 'show slave status' statement.
mysql-test/suite/rpl/t/rpl_known_bugs_detection.test:
Use 'wait_for_slave_sql_error.inc' to wait the given sql thread error happening.
There is no need to print the result of 'show slave stutus'.
mysql-test/suite/rpl/t/rpl_loaddata_fatal.test:
Use 'wait_for_slave_sql_error_and_skip.inc' to wait the given sql thread error happening and then skip the event. There is no need to print the result of 'show slave stutus'.
mysql-test/suite/rpl/t/rpl_log_pos.test:
Use 'wait_for_slave_io_error.inc' to wait the given io thread error happening.
There is no need to print the result of 'show slave status'.
mysql-test/suite/rpl/t/rpl_rbr_to_sbr.test:
Use 'show_binlog_events.inc' instead of 'show binlog events' statement.
mysql-test/suite/rpl/t/rpl_replicate_do.test:
Use 'show_slave_status.inc' instead of 'show slave status'.
mysql-test/suite/rpl/t/rpl_rotate_logs.test:
Use 'show_slave_status.inc' instead of 'show_slave_status2.inc'.
mysql-test/suite/rpl/t/rpl_row_basic_11bugs.test:
Use 'show_binlog_events.inc' instead of 'show binlog events' statement.
mysql-test/suite/rpl/t/rpl_row_create_table.test:
Use 'show_binlog_events.inc' instead of 'show binlog events' statement.
mysql-test/suite/rpl/t/rpl_row_drop.test:
Use 'show_binlog_events.inc' instead of 'show binlog events' statement.
mysql-test/suite/rpl/t/rpl_row_until.test:
Use 'check_slave_param.inc' to check whether SQL Thread stop at a right position, and use binlog position variables instead of explicit number in the 'CHANGE MASTER' statements.
mysql-test/suite/rpl/t/rpl_skip_error.test:
Use 'check_slave_is_running.inc' instead of 'show slave status' statement.
mysql-test/suite/rpl/t/rpl_slave_load_remove_tmpfile.test:
Use 'wait_for_slave_sql_error.inc' to wait the given sql thread error happening.
There is no need to print the result of 'show slave status'.
mysql-test/suite/rpl/t/rpl_slave_skip.test:
Use 'check_slave_param.inc' to check whether SQL Thread stop at a right position, and mask the explicit position number in the 'CHANGE MASTER' statements.
mysql-test/suite/rpl/t/rpl_sp.test:
Use 'show_binlog_events.inc' instead of 'show binlog events' statement.
mysql-test/suite/rpl/t/rpl_ssl.test:
Use 'show_slave_status.inc' instead of 'show slave status'.
mysql-test/suite/rpl/t/rpl_ssl1.test:
Use 'show_slave_status.inc' instead of 'show slave status'.
mysql-test/suite/rpl/t/rpl_stm_until.test:
Use 'check_slave_param.inc' to check whether SQL Thread stop at a right position, and use binlog position variables instead of explicit number in the 'CHANGE MASTER' statements.
mysql-test/suite/rpl/t/rpl_temporary_errors.test:
Use 'check_slave_is_running.inc' instead of 'show slave status' statement.
mysql-test/suite/rpl_ndb/t/rpl_ndb_basic.test:
Use 'wait_for_slave_sql_error.inc' to wait the given sql thread error happening.
There is no need to print the result of 'show slave status'.
mysql-test/suite/rpl_ndb/t/rpl_ndb_circular.test:
Use 'check_slave_is_running.inc' instead of 'show slave status' statement.
mysql-test/suite/rpl_ndb/t/rpl_ndb_circular_simplex.test:
Use 'check_slave_is_running.inc' instead of 'show slave status' statement.
mysql-test/suite/rpl_ndb/t/rpl_ndb_idempotent.test:
Use 'check_slave_is_running.inc' instead of 'show slave status' statement.
mysql-test/suite/rpl_ndb/t/rpl_ndb_multi.test:
Mask master_log_pos and master_log_file
mysql-test/suite/rpl_ndb/t/rpl_ndb_sync.test:
Use 'check_slave_is_running.inc' instead of 'show slave status' statement.
mysql-test/suite/rpl_ndb/t/rpl_truncate_7ndb.test:
Use 'show_binlog_events.inc' instead of 'show binlog events' statement.
mysql-test/t/alter_table-big.test:
Use 'show_binlog_events.inc' instead of 'show binlog events' statement.
mysql-test/t/create-big.test:
Use 'show_binlog_events.inc' instead of 'show binlog events' statement.
mysql-test/t/ctype_cp932_binlog_stm.test:
Use 'show_binlog_events.inc' instead of 'show binlog events' statement.
mysql-test/t/flush_block_commit_notembedded.test:
It checks whether somethings are binlogged,
so we using 'show_binlog_event.inc' instead of 'show master status'.
mysql-test/t/multi_update.test:
It checks whether somethings are binlogged,
so we using 'wait_binlog_event.inc' instead of 'show master status'.
mysql-test/t/sp_trans_log.test:
Use 'show_binlog_events.inc' instead of 'show binlog events' statement.
