bug #57006 "Deadlock between HANDLER and FLUSH TABLES WITH READ
LOCK" and bug #54673 "It takes too long to get readlock for
'FLUSH TABLES WITH READ LOCK'".
The first bug manifested itself as a deadlock which occurred
when a connection, which had some table open through HANDLER
statement, tried to update some data through DML statement
while another connection tried to execute FLUSH TABLES WITH
READ LOCK concurrently.
What happened was that FTWRL in the second connection managed
to perform first step of GRL acquisition and thus blocked all
upcoming DML. After that it started to wait for table open
through HANDLER statement to be flushed. When the first connection
tried to execute DML it has started to wait for GRL/the second
connection creating deadlock.
The second bug manifested itself as starvation of FLUSH TABLES
WITH READ LOCK statements in cases when there was a constant
stream of concurrent DML statements (in two or more
connections).
This has happened because requests for protection against GRL
which were acquired by DML statements were ignoring presence of
pending GRL and thus the latter was starved.
This patch solves both these problems by re-implementing GRL
using metadata locks.
Similar to the old implementation acquisition of GRL in new
implementation is two-step. During the first step we block
all concurrent DML and DDL statements by acquiring global S
metadata lock (each DML and DDL statement acquires global IX
lock for its duration). During the second step we block commits
by acquiring global S lock in COMMIT namespace (commit code
acquires global IX lock in this namespace).
Note that unlike in old implementation acquisition of
protection against GRL in DML and DDL is semi-automatic.
We assume that any statement which should be blocked by GRL
will either open and acquires write-lock on tables or acquires
metadata locks on objects it is going to modify. For any such
statement global IX metadata lock is automatically acquired
for its duration.
The first problem is solved because waits for GRL become
visible to deadlock detector in metadata locking subsystem
and thus deadlocks like one in the first bug become impossible.
The second problem is solved because global S locks which
are used for GRL implementation are given preference over
IX locks which are acquired by concurrent DML (and we can
switch to fair scheduling in future if needed).
Important change:
FTWRL/GRL no longer blocks DML and DDL on temporary tables.
Before this patch behavior was not consistent in this respect:
in some cases DML/DDL statements on temporary tables were
blocked while in others they were not. Since the main use cases
for FTWRL are various forms of backups and temporary tables are
not preserved during backups we have opted for consistently
allowing DML/DDL on temporary tables during FTWRL/GRL.
Important change:
This patch changes thread state names which are used when
DML/DDL of FTWRL is waiting for global read lock. It is now
either "Waiting for global read lock" or "Waiting for commit
lock" depending on the stage on which FTWRL is.
Incompatible change:
To solve deadlock in events code which was exposed by this
patch we have to replace LOCK_event_metadata mutex with
metadata locks on events. As result we have to prohibit
DDL on events under LOCK TABLES.
This patch also adds extensive test coverage for interaction
of DML/DDL and FTWRL.
Performance of new and old global read lock implementations
in sysbench tests were compared. There were no significant
difference between new and old implementations.
mysql-test/include/check_ftwrl_compatible.inc:
Added helper script which allows to check that a statement is
compatible with FLUSH TABLES WITH READ LOCK.
mysql-test/include/check_ftwrl_incompatible.inc:
Added helper script which allows to check that a statement is
incompatible with FLUSH TABLES WITH READ LOCK.
mysql-test/include/handler.inc:
Adjusted test case to the fact that now DROP TABLE closes
open HANDLERs for the table to be dropped before checking
if there active FTWRL in this connection.
mysql-test/include/wait_show_condition.inc:
Fixed small error in the timeout message. The correct name
of variable used as parameter for this script is "$condition"
and not "$wait_condition".
mysql-test/r/delayed.result:
Added test coverage for scenario which triggered assert in
metadata locking subsystem.
mysql-test/r/events_2.result:
Updated test results after prohibiting event DDL operations
under LOCK TABLES.
mysql-test/r/flush.result:
Added test coverage for bug #57006 "Deadlock between HANDLER
and FLUSH TABLES WITH READ LOCK".
mysql-test/r/flush_read_lock.result:
Added test coverage for various aspects of FLUSH TABLES WITH
READ LOCK functionality.
mysql-test/r/flush_read_lock_kill.result:
Adjusted test case after replacing custom global read lock
implementation with one based on metadata locks. Use new
debug_sync point. Do not disable concurrent inserts as now
InnoDB we always use InnoDB table.
mysql-test/r/handler_innodb.result:
Adjusted test case to the fact that now DROP TABLE closes
open HANDLERs for the table to be dropped before checking
if there active FTWRL in this connection.
mysql-test/r/handler_myisam.result:
Adjusted test case to the fact that now DROP TABLE closes
open HANDLERs for the table to be dropped before checking
if there active FTWRL in this connection.
mysql-test/r/mdl_sync.result:
Adjusted test case after replacing custom global read lock
implementation with one based on metadata locks. Replaced
usage of GRL-specific debug_sync's with appropriate sync
points in MDL subsystem.
mysql-test/suite/perfschema/r/dml_setup_instruments.result:
Updated test results after removing global
COND_global_read_lock condition variable.
mysql-test/suite/perfschema/r/func_file_io.result:
Ensure that this test doesn't affect subsequent tests.
At the end of its execution enable back P_S instrumentation
which this test disables at some point.
mysql-test/suite/perfschema/r/func_mutex.result:
Ensure that this test doesn't affect subsequent tests.
At the end of its execution enable back P_S instrumentation
which this test disables at some point.
mysql-test/suite/perfschema/r/global_read_lock.result:
Adjusted test case to take into account that new GRL
implementation is based on MDL.
mysql-test/suite/perfschema/r/server_init.result:
Adjusted test case after replacing custom global read
lock implementation with one based on MDL and replacing
LOCK_event_metadata mutex with metadata lock.
mysql-test/suite/perfschema/t/func_file_io.test:
Ensure that this test doesn't affect subsequent tests.
At the end of its execution enable back P_S instrumentation
which this test disables at some point.
mysql-test/suite/perfschema/t/func_mutex.test:
Ensure that this test doesn't affect subsequent tests.
At the end of its execution enable back P_S instrumentation
which this test disables at some point.
mysql-test/suite/perfschema/t/global_read_lock.test:
Adjusted test case to take into account that new GRL
implementation is based on MDL.
mysql-test/suite/perfschema/t/server_init.test:
Adjusted test case after replacing custom global read
lock implementation with one based on MDL and replacing
LOCK_event_metadata mutex with metadata lock.
mysql-test/suite/rpl/r/rpl_tmp_table_and_DDL.result:
Updated test results after prohibiting event DDL under
LOCK TABLES.
mysql-test/t/delayed.test:
Added test coverage for scenario which triggered assert in
metadata locking subsystem.
mysql-test/t/events_2.test:
Updated test case after prohibiting event DDL operations
under LOCK TABLES.
mysql-test/t/flush.test:
Added test coverage for bug #57006 "Deadlock between HANDLER
and FLUSH TABLES WITH READ LOCK".
mysql-test/t/flush_block_commit.test:
Adjusted test case after changing thread state name which
is used when COMMIT waits for FLUSH TABLES WITH READ LOCK
from "Waiting for release of readlock" to "Waiting for commit
lock".
mysql-test/t/flush_block_commit_notembedded.test:
Adjusted test case after changing thread state name which is
used when DML waits for FLUSH TABLES WITH READ LOCK. Now we
use "Waiting for global read lock" in this case.
mysql-test/t/flush_read_lock.test:
Added test coverage for various aspects of FLUSH TABLES WITH
READ LOCK functionality.
mysql-test/t/flush_read_lock_kill-master.opt:
We no longer need to use make_global_read_lock_block_commit_loop
debug tag in this test. Instead we rely on an appropriate
debug_sync point in MDL code.
mysql-test/t/flush_read_lock_kill.test:
Adjusted test case after replacing custom global read lock
implementation with one based on metadata locks. Use new
debug_sync point. Do not disable concurrent inserts as now
InnoDB we always use InnoDB table.
mysql-test/t/lock_multi.test:
Adjusted test case after changing thread state names which
are used when DML or DDL waits for FLUSH TABLES WITH READ
LOCK to "Waiting for global read lock".
mysql-test/t/mdl_sync.test:
Adjusted test case after replacing custom global read lock
implementation with one based on metadata locks. Replaced
usage of GRL-specific debug_sync's with appropriate sync
points in MDL subsystem. Updated thread state names which
are used when DDL waits for FTWRL.
mysql-test/t/trigger_notembedded.test:
Adjusted test case after changing thread state names which
are used when DML or DDL waits for FLUSH TABLES WITH READ
LOCK to "Waiting for global read lock".
sql/event_data_objects.cc:
Removed Event_queue_element::status/last_executed_changed
members and Event_queue_element::update_timing_fields()
method. We no longer use this class for updating mysql.events
once event is chosen for execution. Accesses to instances of
this class in scheduler thread require protection by
Event_queue::LOCK_event_queue mutex and we try to avoid
updating table while holding this lock.
sql/event_data_objects.h:
Removed Event_queue_element::status/last_executed_changed
members and Event_queue_element::update_timing_fields()
method. We no longer use this class for updating mysql.events
once event is chosen for execution. Accesses to instances of
this class in scheduler thread require protection by
Event_queue::LOCK_event_queue mutex and we try to avoid
updating table while holding this lock.
sql/event_db_repository.cc:
- Changed Event_db_repository methods to not release all
metadata locks once they are done updating mysql.events
table. This allows to keep metadata lock protecting
against GRL and lock protecting particular event around
until corresponding DDL statement is written to the binary
log.
- Removed logic for conditional update of "status" and
"last_executed" fields from update_timing_fields_for_event()
method. In the only case when this method is called now
"last_executed" is always modified and tracking change
of "status" is too much hassle.
sql/event_db_repository.h:
Removed logic for conditional update of "status" and
"last_executed" fields from Event_db_repository::
update_timing_fields_for_event() method.
In the only case when this method is called now "last_executed"
is always modified and tracking change of "status" field is
too much hassle.
sql/event_queue.cc:
Changed event scheduler code not to update mysql.events
table while holding Event_queue::LOCK_event_queue mutex.
Doing so led to a deadlock with a new GRL implementation.
This deadlock didn't occur with old implementation due to
fact that code acquiring protection against GRL ignored
pending GRL requests (which lead to GRL starvation).
One of goals of new implementation is to disallow GRL
starvation and so we have to solve problem with this
deadlock in a different way.
sql/events.cc:
Changed methods of Events class to acquire protection
against GRL while perfoming DDL statement and keep it
until statement is written to the binary log.
Unfortunately this step together with new GRL implementation
exposed deadlock involving Events::LOCK_event_metadata
and GRL. To solve it Events::LOCK_event_metadata mutex was
replaced with a metadata lock on event. As a side-effect
events DDL has to be prohibited under LOCK TABLES even in
cases when mysql.events table was explicitly locked for
write.
sql/events.h:
Replaced Events::LOCK_event_metadata mutex with a metadata
lock on event.
sql/ha_ndbcluster.cc:
Updated code after replacing custom global read lock
implementation with one based on MDL. Since MDL subsystem
should now be able to detect deadlocks involving metadata
locks and GRL there is no need for special handling of
active GRL.
sql/handler.cc:
Replaced custom implementation of global read lock with
one based on metadata locks. Consequently when doing
commit instead of calling method of Global_read_lock
class to acquire protection against GRL we simply acquire
IX in COMMIT namespace.
sql/lock.cc:
Replaced custom implementation of global read lock with
one based on metadata locks. This step allows to expose
wait for GRL to deadlock detector of MDL subsystem and
thus succesfully resolve deadlocks similar to one behind
bug #57006 "Deadlock between HANDLER and FLUSH TABLES
WITH READ LOCK". It also solves problem with GRL starvation
described in bug #54673 "It takes too long to get readlock
for 'FLUSH TABLES WITH READ LOCK'" since metadata locks used
by GRL give preference to FTWRL statement instead of DML
statements (if needed in future this can be changed to
fair scheduling).
Similar to old implementation of acquisition of GRL is
two-step. During the first step we block all concurrent
DML and DDL statements by acquiring global S metadata lock
(each DML and DDL statement acquires global IX lock for
its duration). During the second step we block commits by
acquiring global S lock in COMMIT namespace (commit code
acquires global IX lock in this namespace).
Note that unlike in old implementation acquisition of
protection against GRL in DML and DDL is semi-automatic.
We assume that any statement which should be blocked by GRL
will either open and acquires write-lock on tables or acquires
metadata locks on objects it is going to modify. For any such
statement global IX metadata lock is automatically acquired
for its duration.
To support this change:
- Global_read_lock::lock/unlock_global_read_lock and
make_global_read_lock_block_commit methods were changed
accordingly.
- Global_read_lock::wait_if_global_read_lock() and
start_waiting_global_read_lock() methods were dropped.
It is now responsibility of code acquiring metadata locks
opening tables to acquire protection against GRL by
explicitly taking global IX lock with statement duration.
- Global variables, mutex and condition variable used by
old implementation was removed.
- lock_routine_name() was changed to use statement duration for
its global IX lock. It was also renamed to lock_object_name()
as it now also used to take metadata locks on events.
- Global_read_lock::set_explicit_lock_duration() was added which
allows not to release locks used for GRL when leaving prelocked
mode.
sql/lock.h:
- Renamed lock_routine_name() to lock_object_name() and changed
its signature to allow its usage for events.
- Removed broadcast_refresh() function. It is no longer needed
with new GRL implementation.
sql/log_event.cc:
Release metadata locks with statement duration at the end
of processing legacy event for LOAD DATA. This ensures that
replication thread processing such event properly releases
its protection against global read lock.
sql/mdl.cc:
Changed MDL subsystem to support new MDL-based implementation
of global read lock.
Added COMMIT and EVENTS namespaces for metadata locks. Changed
thread state name for GLOBAL namespace to "Waiting for global
read lock".
Optimized MDL_map::find_or_insert() method to avoid taking
m_mutex mutex when looking up MDL_lock objects for GLOBAL
or COMMIT namespaces. We keep pre-created MDL_lock objects
for these namespaces around and simply return pointers to
these global objects when needed.
Changed MDL_lock/MDL_scoped_lock to properly handle
notification of insert delayed handler threads when FTWRL
takes global S lock.
Introduced concept of lock duration. In addition to locks with
transaction duration which work in the way which is similar to
how locks worked before (i.e. they are released at the end of
transaction), locks with statement and explicit duration were
introduced.
Locks with statement duration are automatically released at the
end of statement. Locks with explicit duration require explicit
release and obsolete concept of transactional sentinel.
* Changed MDL_request and MDL_ticket classes to support notion
of duration.
* Changed MDL_context to keep locks with different duration in
different lists. Changed code handling ticket list to take
this into account.
* Changed methods responsible for releasing locks to take into
account duration of tickets. Particularly public
MDL_context::release_lock() method now only can release
tickets with explicit duration (there is still internal
method which allows to specify duration). To release locks
with statement or transaction duration one have to use
release_statement/transactional_locks() methods.
* Concept of savepoint for MDL subsystem now has to take into
account locks with statement duration. Consequently
MDL_savepoint class was introduced and methods working with
savepoints were updated accordingly.
* Added methods which allow to set duration for one or all
locks in the context.
sql/mdl.h:
Changed MDL subsystem to support new MDL-based implementation
of global read lock.
Added COMMIT and EVENTS namespaces for metadata locks.
Introduced concept of lock duration. In addition to locks with
transaction duration which work in the way which is similar to
how locks worked before (i.e. they are released at the end of
transaction), locks with statement and explicit duration were
introduced.
Locks with statement duration are automatically released at the
end of statement. Locks with explicit duration require explicit
release and obsolete concept of transactional sentinel.
* Changed MDL_request and MDL_ticket classes to support notion
of duration.
* Changed MDL_context to keep locks with different duration in
different lists. Changed code handling ticket list to take
this into account.
* Changed methods responsible for releasing locks to take into
account duration of tickets. Particularly public
MDL_context::release_lock() method now only can release
tickets with explicit duration (there is still internal
method which allows to specify duration). To release locks
with statement or transaction duration one have to use
release_statement/transactional_locks() methods.
* Concept of savepoint for MDL subsystem now has to take into
account locks with statement duration. Consequently
MDL_savepoint class was introduced and methods working with
savepoints were updated accordingly.
* Added methods which allow to set duration for one or all
locks in the context.
sql/mysqld.cc:
Removed global mutex and condition variables which were used
by old implementation of GRL.
Also we no longer need to initialize Events::LOCK_event_metadata
mutex as it was replaced with metadata locks on events.
sql/mysqld.h:
Removed global variable, mutex and condition variables which
were used by old implementation of GRL.
sql/rpl_rli.cc:
When slave thread closes tables which were open for handling
of RBR events ensure that it releases global IX lock which
was acquired as protection against GRL.
sql/sp.cc:
Adjusted code to the new signature of lock_object/routine_name(),
to the fact that one now needs specify duration of lock when
initializing MDL_request and to the fact that savepoints for MDL
subsystem are now represented by MDL_savepoint class.
sql/sp_head.cc:
Ensure that statements in stored procedures release statement
metadata locks and thus release their protectiong against GRL
in proper moment in time.
Adjusted code to the fact that one now needs specify duration
of lock when initializing MDL_request.
sql/sql_admin.cc:
Adjusted code to the fact that one now needs specify duration
of lock when initializing MDL_request.
sql/sql_base.cc:
- Implemented support for new approach to acquiring protection
against global read lock. We no longer acquire such protection
explicitly on the basis of statement flags. Instead we always
rely on code which is responsible for acquiring metadata locks
on object to be changed acquiring this protection. This is
achieved by acquiring global IX metadata lock with statement
duration. Code doing this also responsible for checking that
current connection has no active GRL by calling an
Global_read_lock::can_acquire_protection() method.
Changed code in open_table() and lock_table_names()
accordingly.
Note that as result of this change DDL and DML on temporary
tables is always compatible with GRL (before it was
incompatible in some cases and compatible in other cases).
- To speed-up code acquiring protection against GRL introduced
m_has_protection_against_grl member in Open_table_context
class. It indicates that protection was already acquired
sometime during open_tables() execution and new attempts
can be skipped.
- Thanks to new GRL implementation calls to broadcast_refresh()
became unnecessary and were removed.
- Adjusted code to the fact that one now needs specify duration
of lock when initializing MDL_request and to the fact that
savepoints for MDL subsystem are now represented by
MDL_savepoint class.
sql/sql_base.h:
Adjusted code to the fact that savepoints for MDL subsystem are
now represented by MDL_savepoint class.
Also introduced Open_table_context::m_has_protection_against_grl
member which allows to avoid acquiring protection against GRL
while opening tables if such protection was already acquired.
sql/sql_class.cc:
Changed THD::leave_locked_tables_mode() after transactional
sentinel for metadata locks was obsoleted by introduction of
locks with explicit duration.
sql/sql_class.h:
- Adjusted code to the fact that savepoints for MDL subsystem
are now represented by MDL_savepoint class.
- Changed Global_read_lock class according to changes in
global read lock implementation:
* wait_if_global_read_lock and start_waiting_global_read_lock
are now gone. Instead code needing protection against GRL
has to acquire global IX metadata lock with statement
duration itself. To help it new can_acquire_protection()
was introduced. Also as result of the above change
m_protection_count member is gone too.
* Added m_mdl_blocks_commits_lock member to store metadata
lock blocking commits.
* Adjusted code to the fact that concept of transactional
sentinel was obsoleted by concept of lock duration.
- Removed CF_PROTECT_AGAINST_GRL flag as it is no longer
necessary. New GRL implementation acquires protection
against global read lock automagically when statement
acquires metadata locks on tables or other objects it
is going to change.
sql/sql_db.cc:
Adjusted code to the fact that one now needs specify duration
of lock when initializing MDL_request.
sql/sql_handler.cc:
Removed call to broadcast_refresh() function. It is no longer
needed with new GRL implementation.
Adjusted code after introducing duration concept for metadata
locks. Particularly to the fact transactional sentinel was
replaced with explicit duration.
sql/sql_handler.h:
Renamed mysql_ha_move_tickets_after_trans_sentinel() to
mysql_ha_set_explicit_lock_duration() after transactional
sentinel was obsoleted by locks with explicit duration.
sql/sql_insert.cc:
Adjusted code handling delaying inserts after switching to
new GRL implementation. Now connection thread initiating
delayed insert has to acquire global IX lock in addition
to metadata lock on table being inserted into. This IX lock
protects against GRL and similarly to SW lock on table being
inserted into has to be passed to handler thread in order to
avoid deadlocks.
sql/sql_lex.cc:
LEX::protect_against_global_read_lock member is no longer
necessary since protection against GRL is automatically
taken by code acquiring metadata locks/opening tables.
sql/sql_lex.h:
LEX::protect_against_global_read_lock member is no longer
necessary since protection against GRL is automatically
taken by code acquiring metadata locks/opening tables.
sql/sql_parse.cc:
- Implemented support for new approach to acquiring protection
against global read lock. We no longer acquire such protection
explicitly on the basis of statement flags. Instead we always
rely on code which is responsible for acquiring metadata locks
on object to be changed acquiring this protection. This is
achieved by acquiring global IX metadata lock with statement
duration. This lock is automatically released at the end of
statement execution.
- Changed implementation of CREATE/DROP PROCEDURE/FUNCTION not
to release metadata locks and thus protection against of GRL
in the middle of statement execution.
- Adjusted code to the fact that one now needs specify duration
of lock when initializing MDL_request and to the fact that
savepoints for MDL subsystem are now represented by
MDL_savepoint class.
sql/sql_prepare.cc:
Adjusted code to the to the fact that savepoints for MDL
subsystem are now represented by MDL_savepoint class.
sql/sql_rename.cc:
With new GRL implementation there is no need to explicitly
acquire protection against GRL before renaming tables.
This happens automatically in code which acquires metadata
locks on tables being renamed.
sql/sql_show.cc:
Adjusted code to the fact that one now needs specify duration
of lock when initializing MDL_request and to the fact that
savepoints for MDL subsystem are now represented by
MDL_savepoint class.
sql/sql_table.cc:
- With new GRL implementation there is no need to explicitly
acquire protection against GRL before dropping tables.
This happens automatically in code which acquires metadata
locks on tables being dropped.
- Changed mysql_alter_table() not to release lock on new table
name explicitly and to rely on automatic release of locks
at the end of statement instead. This was necessary since
now MDL_context::release_lock() is supported only for locks
for explicit duration.
sql/sql_trigger.cc:
With new GRL implementation there is no need to explicitly
acquire protection against GRL before changing table triggers.
This happens automatically in code which acquires metadata
locks on tables which triggers are to be changed.
sql/sql_update.cc:
Fix bug exposed by GRL testing. During prepare phase acquire
only S metadata locks instead of SW locks to keep prepare of
multi-UPDATE compatible with concurrent LOCK TABLES WRITE
and global read lock.
sql/sql_view.cc:
With new GRL implementation there is no need to explicitly
acquire protection against GRL before creating view.
This happens automatically in code which acquires metadata
lock on view to be created.
sql/sql_yacc.yy:
LEX::protect_against_global_read_lock member is no longer
necessary since protection against GRL is automatically
taken by code acquiring metadata locks/opening tables.
sql/table.cc:
Adjusted code to the fact that one now needs specify duration
of lock when initializing MDL_request.
sql/table.h:
Adjusted code to the fact that one now needs specify duration
of lock when initializing MDL_request.
sql/transaction.cc:
Replaced custom implementation of global read lock with
one based on metadata locks. Consequently when doing
commit instead of calling method of Global_read_lock
class to acquire protection against GRL we simply acquire
IX in COMMIT namespace.
Also adjusted code to the fact that MDL savepoint is now
represented by MDL_savepoint class.
After the WL#2687, the binlog_cache_size and max_binlog_cache_size affect both the
stmt-cache and the trx-cache. This means that the resource used is twice the amount
expected/defined by the user.
The binlog_cache_use is incremented when the stmt-cache or the trx-cache is used
and binlog_cache_disk_use is incremented when the disk space from the stmt-cache or the
trx-cache is used. This behavior does not allow to distinguish which cache may be harming
performance due to the extra disk accesses and needs to have its in-memory cache
increased.
To fix the problem, we introduced two new options and status variables related to the
stmt-cache:
Options:
. binlog_stmt_cache_size
. max_binlog_stmt_cache_size
Status Variables:
. binlog_stmt_cache_use
. binlog_stmt_cache_disk_use
So there are
. binlog_cache_size that defines the size of the transactional cache for
updates to transactional engines for the binary log.
. binlog_stmt_cache_size that defines the size of the statement cache for
updates to non-transactional engines for the binary log.
. max_binlog_cache_size that sets the total size of the transactional
cache.
. max_binlog_stmt_cache_size that sets the total size of the statement
cache.
. binlog_cache_use that identifies the number of transactions that used the
temporary transactional binary log cache.
. binlog_cache_disk_use that identifies the number of transactions that used
the temporary transactional binary log cache but that exceeded the value of
binlog_cache_size.
. binlog_stmt_cache_use that identifies the number of statements that used the
temporary non-transactional binary log cache.
. binlog_stmt_cache_disk_use that identifies the number of statements that used
the temporary non-transactional binary log cache but that exceeded the value of
binlog_stmt_cache_size.
include/my_sys.h:
Updated message on disk_writes' usage.
mysql-test/extra/binlog_tests/binlog_cache_stat.test:
Updated the test case and added code to check the new status variables
binlog_stmt_cache_use and binlog_stmt_cache_disk_use.
mysql-test/extra/rpl_tests/rpl_binlog_max_cache_size.test:
Updated the test case to use the new system variables max_binlog_stmt_cache_size and binlog_stmt_cache_size.
mysql-test/r/mysqld--help-notwin.result:
Updated the result file.
mysql-test/suite/binlog/r/binlog_mixed_cache_stat.result:
Updated the result file.
mysql-test/suite/binlog/r/binlog_row_cache_stat.result:
Updated the result file.
mysql-test/suite/binlog/r/binlog_stm_cache_stat.result:
Updated the result file.
mysql-test/suite/rpl/r/rpl_mixed_binlog_max_cache_size.result:
Update the result file.
mysql-test/suite/rpl/r/rpl_row_binlog_max_cache_size.result:
Update the result file.
mysql-test/suite/rpl/r/rpl_stm_binlog_max_cache_size.result:
Updated the result file.
mysql-test/suite/sys_vars/inc/binlog_stmt_cache_size_basic.inc:
Added a test case to check the binlog_stmt_cache_size.
mysql-test/suite/sys_vars/r/binlog_stmt_cache_size_basic_32.result:
Updated the result file.
mysql-test/suite/sys_vars/r/binlog_stmt_cache_size_basic_64.result:
Updated the result file.
mysql-test/suite/sys_vars/r/max_binlog_stmt_cache_size_basic.result:
Updated the result file.
mysql-test/suite/sys_vars/t/binlog_stmt_cache_size_basic_32.test:
Added a test case to check the binlog_stmt_cache_size.
mysql-test/suite/sys_vars/t/binlog_stmt_cache_size_basic_64.test:
Added a test case to check the binlog_stmt_cache_size.
mysql-test/suite/sys_vars/t/max_binlog_cache_size_func-master.opt:
Removed because there is no test case max_binlog_cache_size_func.
mysql-test/suite/sys_vars/t/max_binlog_stmt_cache_size_basic.test:
Added a test case to check the system variable max_binlog_stmt_cache_size.
sql/log.cc:
There two main changes in here:
. Changed the set_write_error() as an error message is set according
to the type of the cache.
. Created the function set_binlog_cache_info where references to the
appropriate status and system variables are set and the server can
smoothly compute statistics and set the maximum size for each cache.
sql/log.h:
Changed the signature of the function in order to identify the error message
to be printed out as there is a different error code for each type of cache.
sql/mysqld.cc:
Added new status variables binlog_stmt_cache_use and binlog_stmt_cache_disk_use.
sql/mysqld.h:
Added new system variables max_binlog_stmt_cache_size and binlog_stmt_cache_size.
sql/share/errmsg-utf8.txt:
Added new error message related to the statement cache.
sql/sys_vars.cc:
Added new system variables max_binlog_stmt_cache_size and binlog_stmt_cache_size.
There were actually more problems in this area:
Slaves (if any) were unconditionally restarted, this appears unnecessary.
Sort criteria were suboptimal, included the test name.
Added logic to "reserve" a sequence of tests with same config for one thread
Got rid of sort_criteria hash, put it into the test case itself
Adds little sanity check that expected worker picks up test
Fixed some tests that may fail if starting on running server
Some of these fail only if *same* test is repeated.
Finally, special sorting of tests that do --force-restart
The problem was that the warnings risen by a trigger were not cleared upon
successful completion. The warnings should be cleared if the trigger completes
successfully.
The fix is to skip merging warnings into caller's Warning Info for triggers.
"Grantor" columns' data is lost when replicating mysql.tables_priv.
Slave SQL thread used its default user ''@'' as the grantor of GRANT|REVOKE
statements executing on it.
In this patch, current user is put in query log event for all GRANT and REVOKE
statement, SQL thread uses the user in query log event as grantor.
mysql-test/suite/rpl/r/rpl_do_grant.result:
Add test for this bug.
mysql-test/suite/rpl/t/rpl_do_grant.test:
Add test for this bug.
sql/log_event.cc:
Refactoring THD::current_user_used and related functions.
current_user_used is used to judge if current user should be
binlogged in query log event. So it is better to call it m_binlog_invoker.
The related functions are renamed too.
sql/sql_class.cc:
Refactoring THD::current_user_used and related functions.
current_user_used is used to judge if current user should be
binlogged in query log event. So it is better to call it m_binlog_invoker.
The related functions are renamed too.
sql/sql_class.h:
Refactoring THD::current_user_used and related functions.
current_user_used is used to judge if current user should be
binlogged in query log event. So it is better to call it m_binlog_invoker.
The related functions are renamed too.
sql/sql_parse.cc:
Call binlog_invoker() for GRANT and REVOKE statements.
Rows events were applied wrongly on the temporary table with the same name.
But rows events are generated only for base tables. As temporary
table's data never be binlogged on row mode. Normally, base table of the
same name cannot be updated if a temporary table has the same name.
But there are two cases which can generate rows events on
the base table of same name.
Case1: 'CREATE TABLE ... SELECT' statement.
In mixed format, it will generate rows events if it is unsafe.
Case2: Drop a transactional temporary table in a transaction
(happens only on 5.5+).
BEGIN;
DROP TEMPORARY TABLE t1; # t1 is a InnoDB table
INSERT INTO t1 VALUES(rand()); # t1 is a MyISAM table
COMMIT;
'DROP TEMPORARY TABLE' will be put in the transaction cache and
binlogged after the rows events generated by the 'INSERT' statement.
After this patch, slave opens only base table when applying a rows event.
replication aborts
When recieving a 'SLAVE STOP' command, slave SQL thread will roll back the
transaction and stop immidiately if there is only transactional table updated,
even through 'CREATE|DROP TEMPOARY TABLE' statement are in it. But These
statements can never be rolled back. Because the temporary tables to the user
session mapping remain until 'RESET SLAVE', Therefore it will abort SQL thread
with an error that the table already exists or doesn't exist, when it restarts
and executes the whole transaction again.
After this patch, SQL thread always waits till the transaction ends and then stops,
if 'CREATE|DROP TEMPOARY TABLE' statement are in it.
mysql-test/extra/rpl_tests/rpl_stop_slave.test:
Auxiliary file which is used to test this bug.
mysql-test/suite/rpl/t/rpl_stop_slave.test:
Test case for this bug.
sql/slave.cc:
Checking if OPTION_KEEP_LOG is set. If it is set, SQL thread should wait
until the transaction ends.
sql/sql_parse.cc:
Add a debug point for testing this bug.
The root of the problem is that to interrupt a slave SQL thread
wait, the STOP SLAVE implementation uses thd->awake(THD::NOT_KILLED).
This appears as a spurious wakeup (e.g. from a sleep on a
condition variable) to the code that the slave SQL thread is
executing at the time of the STOP. If the code is not written
to be spurious-wakeup safe, unexpected behavior can occur. For
the reported case, this problem led to an infinite loop around
the interruptible_wait() function in item_func.cc (SLEEP()
function implementation). The loop was not being properly
restarted and, consequently, would not come to an end. Since the
SLEEP function sleeps on a timed event in order to be killable
and to perform periodic checks until the requested time has
elapsed, the spurious wake up was causing the requested sleep
time to be reset every two seconds.
The solution is to calculate the requested absolute time only
once and to ensure that the thread only sleeps until this
time is elapsed. In case of a spurious wake up, the sleep is
restarted using the previously calculated absolute time. This
restores the behavior present in previous releases. If a slave
thread is executing a SLEEP function, a STOP SLAVE statement
will wait until the time requested in the sleep function
has elapsed.
mysql-test/extra/rpl_tests/rpl_start_stop_slave.test:
Add test case for Bug#56096.
mysql-test/suite/rpl/r/rpl_stm_start_stop_slave.result:
Add test case result for Bug#56096.
sql/item_func.cc:
Reorganize interruptible_wait into a class so that the absolute
time can be preserved across calls to the wait function. This
allows the sleep to be properly restarted in the presence of
spurious wake ups, including those generated by a STOP SLAVE.
heavy load".
rpl_row_sp003.test has sporadically failed when run on machine
under heavy load or on slow hardware.
This patch fixes races in the test which were causing these
failures and also removes unnecessary 100 second wait from it.
After ALTER TABLE which changed only table's metadata, row-based
binlog sometimes got corrupted since the tablemap was unexpectedly
set to 0 for subsequent updates to the same table.
ALTER TABLE which changed only table's metadata always reset
table_map_id for the table share to 0. Despite the fact that
0 is a valid value for table_map_id, this step caused problems
as it could have created situation in which we had more than
one table share with table_map_id equal 0. If more than one
table with table_map_id are 0 were updated in the same statement,
updates to these different tables were written into the same
rows event. This caused slave server to crash.
This bug happens only on 5.1. It doesn't affect 5.5+.
This patch solves this problem by ensuring that ALTER TABLE
statements which change metadata only never reset table_map_id
to 0. To do this it changes reopen_table() to correctly use
refreshed table_map_id value instead of using the old one/
resetting it.
mysql-test/suite/rpl/r/rpl_alter.result:
Add test for BUG#56226
mysql-test/suite/rpl/t/rpl_alter.test:
Add test for BUG#56226
When slave executes a transaction bigger than slave's max_binlog_cache_size,
slave will crash. It is caused by the assert that server should only roll back
the statement but not the whole transaction if the error ER_TRANS_CACHE_FULL
happens. But slave sql thread always rollbacks the whole transaction when
an error happens.
Ather this patch, we always clear any error set in sql thread(it is different
from the error in 'SHOW SLAVE STATUS') and it is cleared before rolling back
the transaction.
mysql-test/suite/rpl/r/rpl_binlog_max_cache_size.result:
SET binlog_cache_size and max_binlog_cache_size for all test cases.
Add test case for bug#55375.
mysql-test/suite/rpl/t/rpl_binlog_max_cache_size-master.opt:
binlog_cache_size and max_binlog_cache_size can be set in the client connection.
so remove this option file.
mysql-test/suite/rpl/t/rpl_binlog_max_cache_size.test:
SET binlog_cache_size and max_binlog_cache_size for all test cases.
Add test case for bug#55375.
sql/log_event.cc:
Some functions don't return the error code, so it is a wrong error code.
The error should always be set into thd->main_da. So we use
slave_rows_error_report to report the right error.
sql/slave.cc:
exec_relay_log_event() need call cleanup_context() to clear context.
clearup_context() will call end_trans().
Clear thd's error before cleanup_context. It avoid to trigger the assert
which cause this bug.
The error message for ER_SLAVE_HEARTBEAT_VALUE_OUT_OF_RANGE was
hard coded. Additionally, the same error was used in three
separate error symptoms: 1. when heartbeat period exceeds the
value of slave_net_timeout, 2. when it is smaller than 1
milisecond and 3. when it was not in range, ie, either negative
or greater than the maximum allowed.
We fix this by splitting into three distinct errors and by
removing the message from the source code and moving it to the
errmsg-utf8.txt file.
temp table
This patch introduces two key changes in the replication's behavior.
Firstly, it reverts part of BUG#51894 which puts any update to temporary tables
into the trx-cache. Now, updates to temporary tables are handled according to
the type of their engines as a regular table.
Secondly, an unsafe mixed statement, (i.e. a statement that access transactional
table as well non-transactional or temporary table, and writes to any of them),
are written into the trx-cache in order to minimize errors in the execution when
the statement logging format is in use.
Such changes has a direct impact on which statements are classified as unsafe
statements and thus part of BUG#53259 is reverted.
'CREATE TABLE IF NOT EXISTS ... SELECT' behaviour
BUG#47132, BUG#47442, BUG49494, BUG#23992 and BUG#48814 will disappear
automatically after the this patch.
BUG#55617 is fixed by this patch too.
This is the 5.5 part.
It implements:
- 'CREATE TABLE IF NOT EXISTS ... SELECT' statement will not insert
anything and binlog anything if the table already exists.
It only generate a warning that table already exists.
- A couple of test cases for the behavior changing.
'CREATE TABLE IF NOT EXISTS ... SELECT' behaviour
BUG#55474, BUG#55499, BUG#55598, BUG#55616 and BUG#55777 are fixed
in this patch too.
This is the 5.1 part.
It implements:
- if the table exists, binlog two events: CREATE TABLE IF NOT EXISTS
and INSERT ... SELECT
- Insert nothing and binlog nothing on master if the existing object
is a view. It only generates a warning that table already exists.
mysql-test/r/trigger.result:
Ather this patch, 'CREATE TABLE IF NOT EXISTS ... SELECT' will not
insert anything if the creating table already exists and is a view.
sql/sql_class.h:
Declare virtual function write_to_binlog() for select_insert.
It's used to binlog 'create select'
sql/sql_insert.cc:
Implement write_to_binlog();
Use write_to_binlog() instead of binlog_query() to binlog the statement.
if the table exists, binlog two events: CREATE TABLE IF NOT EXISTS
and INSERT ... SELECT
sql/sql_lex.h:
Declare create_select_start_with_brace and create_select_pos.
They are helpful for binlogging 'create select'
sql/sql_parse.cc:
Do nothing on master if the existing object is a view.
sql/sql_yacc.yy:
Record the relative postion of 'SELECT' in the 'CREATE ...SELECT' statement.
Record whether there is a '(' before the 'SELECT' clause.
After BUG#36649, warnings for sub-statements are cleared when a
new sub-statement is started. This is problematic since it suppresses
warnings for unsafe statements in some cases. It is important that we
always give a warning to the client, because the user needs to know
when there is a risk that the slave goes out of sync.
We fixed the problem by generating warning messages for unsafe statements
while returning from a stored procedure, function, trigger or while
executing a top level statement.
We also started checking unsafeness when both performance and log tables are
used. This is necessary after the performance schema which does a distinction
between performance and log tables.
mysql-test/extra/rpl_tests/create_recursive_construct.inc:
Changed the order of the calls in the procedure because the code
that checks if a warning message is printed out expects that the
first statement gives an warning what is not the case for INSERT
INTO ta$CRC_ARG_level VALUES (47);
mysql-test/suite/binlog/r/binlog_stm_unsafe_warning.result:
Updated the result file.
mysql-test/suite/binlog/r/binlog_unsafe.result:
There are several changes here:
(1) - Changed the CREATE PROCEDURE $CRC.
(2) - The procedure $CRC was failing and the content of the binlog
was being printed out, after fix (1) the failure disappeared.
(3) - The warning message for unsafeness due to auto-increment collumns was
changed.
(4) - The warning message for unsafeness due to VERSION(), RAND() was changed.
mysql-test/suite/binlog/t/binlog_stm_unsafe_warning.test:
Tested filters.
mysql-test/suite/binlog/t/binlog_unsafe.test:
Reenabled the test case binlog_unsafe.
mysql-test/suite/binlog/t/disabled.def:
Reenabled the test case binlog_unsafe.
mysql-test/suite/rpl/r/rpl_begin_commit_rollback.result:
Updated the result file.
mysql-test/suite/rpl/r/rpl_non_direct_stm_mixing_engines.result:
Updated the result file.
mysql-test/suite/rpl/r/rpl_stm_auto_increment_bug33029.result:
Updated the result file.
sql/sql_class.cc:
Moved the stmt_accessed_table_flag variable and related information to the
LEX as we need the variable reset after each statement even inside a stored
procedure, what did not happen if the information was in the THD.
Changed the routine in the THD::binlog_query that prints the warning
messages to avoid trying to print them when inside a stored procedure,
function or trigger.
Checked for unsafeness when both performance and log tables where used.
After the introduction of the performance schema, we need to check both.
With statement- or mixed-mode logging, "LOAD DATA INFILE" queries
are written to the binlog using special types of log events.
When mysqlbinlog reads such events, it re-creates the file in a
temporary directory with a generated filename and outputs a
"LOAD DATA INFILE" query where the filename is replaced by the
generated file. The temporary file is not deleted by mysqlbinlog
after termination.
To fix the problem, in mixed mode we go to row-based. In SBR, we
document it to remind user the tmpfile is left in a temporary
directory.
mysql-test/suite/binlog/r/binlog_mixed_load_data.result:
Test result for BUG#34283.
mysql-test/suite/binlog/t/binlog_killed_simulate.test:
Updated for BUg#34283
mysql-test/suite/binlog/t/binlog_mixed_load_data.test:
Added the test file to verify that 'load data infile...' statement
will go to row-based in mixed mode.
mysql-test/suite/binlog/t/binlog_stm_blackhole.test:
Updated for BUg#34283
mysql-test/suite/rpl/r/rpl_innodb_mixed_dml.result:
Updated for Bug#34283
mysql-test/suite/rpl/t/rpl_loaddata.test:
Updated for Bug#34283
mysql-test/suite/rpl/t/rpl_loaddata_fatal.test:
Updated for Bug#34283
mysql-test/suite/rpl/t/rpl_loaddata_map.test:
Updated for Bug#34283
mysql-test/suite/rpl/t/rpl_slave_load_remove_tmpfile.test:
Updated for Bug#34283
mysql-test/suite/rpl/t/rpl_stm_log.test:
Updated for B
mysys/stacktrace.c:
Auto merge
sql/sql_lex.cc:
Auto merg
sql/sql_load.cc:
Added code to go to row-based in mixed mode for
'load data infile ...' statement
With statement- or mixed-mode logging, "LOAD DATA INFILE" queries
are written to the binlog using special types of log events.
When mysqlbinlog reads such events, it re-creates the file in a
temporary directory with a generated filename and outputs a
"LOAD DATA INFILE" query where the filename is replaced by the
generated file. The temporary file is not deleted by mysqlbinlog
after termination.
To fix the problem, in mixed mode we go to row-based. In SBR, we
document it to remind user the tmpfile is left in a temporary
directory.
mysql-test/extra/rpl_tests/rpl_loaddata.test:
Updated for Bug#34283
mysql-test/suite/binlog/r/binlog_mixed_load_data.result:
Test result for BUG#34283.
mysql-test/suite/binlog/t/binlog_killed_simulate.test:
Updated for Bug#34283
mysql-test/suite/binlog/t/binlog_mixed_load_data.test:
Added the test file to verify that 'load data infile...' statement
will go to row-based in mixed mode.
mysql-test/suite/binlog/t/binlog_stm_blackhole.test:
Updated for Bug#34283
mysql-test/suite/rpl/r/rpl_innodb_mixed_dml.result:
Updated for Bug#34283
mysql-test/suite/rpl/t/rpl_loaddata_fatal.test:
Updated for Bug#34283
mysql-test/suite/rpl/t/rpl_loaddata_map.test:
Updated for Bug#34283
mysql-test/suite/rpl/t/rpl_slave_load_remove_tmpfile.test:
Updated for Bug#34283
mysql-test/suite/rpl/t/rpl_stm_log.test:
Updated for Bug#34283
sql/sql_load.cc:
Added code to go to row-based in mixed mode for
'load data infile ...' statement
A CREATE...SELECT that fails is written to the binary log if a non-transactional
statement is updated. If the logging format is ROW, the CREATE statement and the
changes are written to the binary log as distinct events and by consequence the
created table is not rolled back in the slave.
In this patch, we opted to let the slave goes out of sync by not writting to the
binary log the CREATE statement. We do this by simply reseting the binary log's
cache.
mysql-test/suite/rpl/r/rpl_drop.result:
Added a test case.
mysql-test/suite/rpl/t/rpl_drop.test:
Added a test case.
sql/log.cc:
Introduced a function to clean up the cache.
sql/log.h:
Introduced a function to clean up the cache.
sql/sql_insert.cc:
Cleaned up the binary log cache if a CREATE...SELECT fails.
******
This patch fixes the following bugs:
- Bug#5889: Exit handler for a warning doesn't hide the warning in
trigger
- Bug#9857: Stored procedures: handler for sqlwarning ignored
- Bug#23032: Handlers declared in a SP do not handle warnings generated
in sub-SP
- Bug#36185: Incorrect precedence for warning and exception handlers
The problem was in the way warnings/errors during stored routine execution
were handled. Prior to this patch the logic was as follows:
- when a warning/an error happens: if we're executing a stored routine,
and there is a handler for that warning/error, remember the handler,
ignore the warning/error and continue execution.
- after a stored routine instruction is executed: check for a remembered
handler and activate one (if any).
This logic caused several problems:
- if one instruction generates several warnings (errors) it's impossible
to choose the right handler -- a handler for the first generated
condition was chosen and remembered for activation.
- mess with handling conditions in scopes different from the current one.
- not putting generated warnings/errors into Warning Info (Diagnostic
Area) is against The Standard.
The patch changes the logic as follows:
- Diagnostic Area is cleared on the beginning of each statement that
either is able to generate warnings, or is able to work with tables.
- at the end of a stored routine instruction, Diagnostic Area is left
intact.
- Diagnostic Area is checked after each stored routine instruction. If
an instruction generates several condition, it's now possible to take a
look at all of them and determine an appropriate handler.
mysql-test/r/signal.result:
Update result file:
1. handled conditions are not cleared any more;
2. reflect changes in signal.test
mysql-test/r/signal_demo3.result:
Update result file: handled conditions are not cleared any more.
Due to playing with max_error_count, resulting warning lists
have changed.
mysql-test/r/sp-big.result:
Update result file: handled conditions are not cleared any more.
mysql-test/r/sp-bugs.result:
Update result file: handled conditions are not cleared any more.
mysql-test/r/sp-code.result:
Update result file:
1. handled conditions are not cleared any more.
2. add result for a new test case in sp-code.test.
mysql-test/r/sp-error.result:
Update result file:
1. handled conditions are not cleared any more.
2. add result for a new test case in sp-error.test.
mysql-test/r/sp.result:
Update result file: handled conditions are not cleared any more.
mysql-test/r/sp_trans.result:
Update result file: handled conditions are not cleared any more.
mysql-test/r/strict.result:
Update result file: handled conditions are not cleared any more.
mysql-test/r/view.result:
Update result file: handled conditions are not cleared any more.
mysql-test/suite/funcs_1/r/innodb_storedproc_02.result:
Update result file: handled conditions are not cleared any more.
mysql-test/suite/funcs_1/r/memory_storedproc_02.result:
Update result file: handled conditions are not cleared any more.
mysql-test/suite/funcs_1/r/myisam_storedproc_02.result:
Update result file: handled conditions are not cleared any more.
mysql-test/suite/funcs_1/r/storedproc.result:
Update result file: handled conditions are not cleared any more.
mysql-test/suite/rpl/r/rpl_row_sp005.result:
Update result file: handled conditions are not cleared any more.
mysql-test/suite/rpl/r/rpl_row_sp006_InnoDB.result:
Update result file: handled conditions are not cleared any more.
mysql-test/suite/rpl/r/rpl_row_trig003.result:
Update result file: handled conditions are not cleared any more.
mysql-test/t/signal.test:
Make a test case more readable in the result file.
mysql-test/t/sp-code.test:
Add a test case for Bug#23032 checking that
No Data takes precedence on Warning.
mysql-test/t/sp-error.test:
Adding test cases for:
- Bug#23032
- Bug#36185
- Bug#5889
- Bug#9857
mysql-test/t/sp.test:
Fixing test case to reflect behavioral changes made by the patch.
sql/sp_head.cc:
Reset the per-statement warning count before executing
a stored procedure instruction.
Move to a separate function code which checks the
completion status of the executed statement and searches
for a handler.
Remove redundant code now that search for a handler is
done after execution, errors are always pushed.
sql/sp_pcontext.h:
Remove unused code.
sql/sp_rcontext.cc:
- Polish sp_rcontext::find_handler(): use sp_rcontext::m_hfound instead
of an extra local variable;
- Remove sp_rcontext::handle_condition();
- Introduce sp_rcontext::activate_handler(), which prepares
previously found handler for execution.
- Move sp_rcontext::enter_handler() code into activate_handler(),
because enter_handler() is used only from there;
- Cleanups;
- Introduce DBUG_EXECUTE_IF() for a test case in sp-code.test
sql/sp_rcontext.h:
- Remove unused code
- Cleanups
sql/sql_class.cc:
Merge THD::raise_condition_no_handler() into THD::raise_condition().
After the patch raise_condition_no_handler() was called
in raise_condition() only.
sql/sql_class.h:
Remove raise_condition_no_handler().
sql/sql_error.cc:
Remove Warning_info::reserve_space() -- handled conditions are not
cleared any more, so there is no need for RESIGNAL to re-push them.
sql/sql_error.h:
Remove Warning_info::reserve_space().
sql/sql_signal.cc:
Handled conditions are not cleared any more,
so there is no need for RESIGNAL to re-push them.
/*![:version:] Query Code */, where [:version:] is a sequence of 5
digits representing the mysql server version(e.g /*!50200 ... */),
is a special comment that the query in it can be executed on those
servers whose versions are larger than the version appearing in the
comment. It leads to a security issue when slave's version is larger
than master's. A malicious user can improve his privileges on slaves.
Because slave SQL thread is running with SUPER privileges, so it can
execute queries that he/she does not have privileges on master.
This bug is fixed with the logic below:
- To replace '!' with ' ' in the magic comments which are not applied on
master. So they become common comments and will not be applied on slave.
- Example:
'INSERT INTO t1 VALUES (1) /*!10000, (2)*/ /*!99999 ,(3)*/
will be binlogged as
'INSERT INTO t1 VALUES (1) /*!10000, (2)*/ /* 99999 ,(3)*/
mysql-test/suite/rpl/t/rpl_conditional_comments.test:
Test the patch for this bug.
sql/mysql_priv.h:
Rename inBuf as rawBuf and remove the const limitation.
sql/sql_lex.cc:
To replace '!' with ' ' in the magic comments which are not applied on
master.
sql/sql_lex.h:
Remove the const limitation on parameter buff, as it can be modified in the function since
this patch.
Add member function yyUnput for Lex_input_stream. It set a character back the query buff.
sql/sql_parse.cc:
Rename inBuf as rawBuf and remove the const limitation.
sql/sql_partition.cc:
Remove the const limitation on parameter part_buff, as it can be modified in the function since
this patch.
sql/sql_partition.h:
Remove the const limitation on parameter part_buff, as it can be modified in the function since
this patch.
sql/table.h:
Remove the const limitation on variable partition_info, as it can be modified since
this patch.
This patch also fixes Bug#55452 "SET PASSWORD is
replicated twice in RBR mode".
The goal of this patch is to remove the release of
metadata locks from close_thread_tables().
This is necessary to not mistakenly release
the locks in the course of a multi-step
operation that involves multiple close_thread_tables()
or close_tables_for_reopen().
On the same token, move statement commit outside
close_thread_tables().
Other cleanups:
Cleanup COM_FIELD_LIST.
Don't call close_thread_tables() in COM_SHUTDOWN -- there
are no open tables there that can be closed (we leave
the locked tables mode in THD destructor, and this
close_thread_tables() won't leave it anyway).
Make open_and_lock_tables() and open_and_lock_tables_derived()
call close_thread_tables() upon failure.
Remove the calls to close_thread_tables() that are now
unnecessary.
Simplify the back off condition in Open_table_context.
Streamline metadata lock handling in LOCK TABLES
implementation.
Add asserts to ensure correct life cycle of
statement transaction in a session.
Remove a piece of dead code that has also become redundant
after the fix for Bug 37521.
mysql-test/r/variables.result:
Update results: set @@autocommit and statement transaction/
prelocked mode.
mysql-test/r/view.result:
A harmless change in CHECK TABLE <view> status for a broken view.
If previously a failure to prelock all functions used in a view
would leave the connection in LTM_PRELOCKED mode, now we call
close_thread_tables() from open_and_lock_tables()
and leave prelocked mode, thus some check in mysql_admin_table() that
works only in prelocked/locked tables mode is no longer activated.
mysql-test/suite/rpl/r/rpl_row_implicit_commit_binlog.result:
Fixed Bug#55452 "SET PASSWORD is replicated twice in
RBR mode": extra binlog events are gone from the
binary log.
mysql-test/t/variables.test:
Add a test case: set autocommit and statement transaction/prelocked
mode.
sql/event_data_objects.cc:
Simplify code in Event_job_data::execute().
Move sp_head memory management to lex_end().
sql/event_db_repository.cc:
Move the release of metadata locks outside
close_thread_tables().
Make sure we call close_thread_tables() when
open_and_lock_tables() fails and remove extra
code from the events data dictionary.
Use close_mysql_tables(), a new internal
function to properly close mysql.* tables
in the data dictionary.
Contract Event_db_repository::drop_events_by_field,
drop_schema_events into one function.
When dropping all events in a schema,
make sure we don't mistakenly release all
locks acquired by DROP DATABASE. These
include locks on the database name
and the global intention exclusive
metadata lock.
sql/event_db_repository.h:
Function open_event_table() does not require an instance
of Event_db_repository.
sql/events.cc:
Use close_mysql_tables() instead of close_thread_tables()
to bootstrap events, since the latter no longer
releases metadata locks.
sql/ha_ndbcluster.cc:
- mysql_rm_table_part2 no longer releases
acquired metadata locks. Do it in the caller.
sql/ha_ndbcluster_binlog.cc:
Deploy the new protocol for closing thread
tables in run_query() and ndb_binlog_index
code.
sql/handler.cc:
Assert that we never call ha_commit_trans/
ha_rollback_trans in sub-statement, which
is now the case.
sql/handler.h:
Add an accessor to check whether THD_TRANS object
is empty (has no transaction started).
sql/log.cc:
Update a comment.
sql/log_event.cc:
Since now we commit/rollback statement transaction in
mysql_execute_command(), we need a mechanism to communicate
from Query_log_event::do_apply_event() to mysql_execute_command()
that the statement transaction should be rolled back, not committed.
Ideally it would be a virtual method of THD. I hesitate
to make THD a virtual base class in this already large patch.
Use a thd->variables.option_bits for now.
Remove a call to close_thread_tables() from the slave IO
thread. It doesn't open any tables, and the protocol
for closing thread tables is more complicated now.
Make sure we properly close thread tables, however,
in Load_data_log_event, which doesn't
follow the standard server execution procedure
with mysql_execute_command().
@todo: this piece should use Server_runnable
framework instead.
Remove an unnecessary call to mysql_unlock_tables().
sql/rpl_rli.cc:
Update Relay_log_info::slave_close_thread_tables()
to follow the new close protocol.
sql/set_var.cc:
Remove an unused header.
sql/slave.cc:
Remove an unnecessary call to
close_thread_tables().
sql/sp.cc:
Remove unnecessary calls to close_thread_tables()
from SP DDL implementation. The tables will
be closed by the caller, in mysql_execute_command().
When dropping all routines in a database, make sure
to not mistakenly drop all metadata locks acquired
so far, they include the scoped lock on the schema.
sql/sp_head.cc:
Correct the protocol that closes thread tables
in an SP instruction.
Clear lex->sphead before cleaning up lex
with lex_end to make sure that we don't
delete the sphead twice. It's considered
to be "cleaner" and more in line with
future changes than calling delete lex->sphead
in other places that cleanup the lex.
sql/sp_head.h:
When destroying m_lex_keeper of an instruction,
don't delete the sphead that all lex objects
share.
@todo: don't store a reference to routine's sp_head
instance in instruction's lex.
sql/sql_acl.cc:
Don't call close_thread_tables() where the caller will
do that for us.
Fix Bug#55452 "SET PASSWORD is replicated twice in RBR
mode" by disabling RBR replication in change_password()
function.
Use close_mysql_tables() in bootstrap and ACL reload
code to make sure we release all metadata locks.
sql/sql_base.cc:
This is the main part of the patch:
- remove manipulation with thd->transaction
and thd->mdl_context from close_thread_tables().
Now this function is only responsible for closing
tables, nothing else.
This is necessary to be able to easily use
close_thread_tables() in procedures, that
involve multiple open/close tables, which all
need to be protected continuously by metadata
locks.
Add asserts ensuring that TABLE object
is only used when is protected by a metadata lock.
Simplify the back off condition of Open_table_context,
we no longer need to look at the autocommit mode.
Make open_and_lock_tables() and open_normal_and_derived_tables()
close thread tables and release metadata locks acquired so-far
upon failure. This simplifies their usage.
Implement close_mysql_tables().
sql/sql_base.h:
Add declaration for close_mysql_tables().
sql/sql_class.cc:
Remove a piece of dead code that has also become redundant
after the fix for Bug 37521.
The code became dead when my_eof() was made a non-protocol method,
but a method that merely modifies the diagnostics area.
The code became redundant with the fix for Bug#37521, when
we started to cal close_thread_tables() before
Protocol::end_statement().
sql/sql_do.cc:
Do nothing in DO if inside a substatement
(the assert moved out of trans_rollback_stmt).
sql/sql_handler.cc:
Add comments.
sql/sql_insert.cc:
Remove dead code.
Release metadata locks explicitly at the
end of the delayed insert thread.
sql/sql_lex.cc:
Add destruction of lex->sphead to lex_end(),
lex "reset" method called at the end of each statement.
sql/sql_parse.cc:
Move close_thread_tables() and other related
cleanups to mysql_execute_command()
from dispatch_command(). This has become
possible after the fix for Bug#37521.
Mark federated SERVER statements as DDL.
Next step: make sure that we don't store
eof packet in the query cache, and move
the query cache code outside mysql_parse.
Brush up the code of COM_FIELD_LIST.
Remove unnecessary calls to close_thread_tables().
When killing a query, don't report "OK"
if it was a suicide.
sql/sql_parse.h:
Remove declaration of a function that is now static.
sql/sql_partition.cc:
Remove an unnecessary call to close_thread_tables().
sql/sql_plugin.cc:
open_and_lock_tables() will clean up
after itself after a failure.
Move close_thread_tables() above
end: label, and replace with close_mysql_tables(),
which will also release the metadata lock
on mysql.plugin.
sql/sql_prepare.cc:
Now that we no longer release locks in close_thread_tables()
statement prepare code has become more straightforward.
Remove the now redundant check for thd->killed() (used
only by the backup project) from Execute_server_runnable.
Reorder code to take into account that now mysql_execute_command()
performs lex->unit.cleanup() and close_thread_tables().
sql/sql_priv.h:
Add a new option to server options to interact
between the slave SQL thread and execution
framework (hack). @todo: use a virtual
method of class THD instead.
sql/sql_servers.cc:
Due to Bug 25705 replication of
DROP/CREATE/ALTER SERVER is broken.
Make sure at least we do not attempt to
replicate these statements using RBR,
as this violates the assert in close_mysql_tables().
sql/sql_table.cc:
Do not release metadata locks in mysql_rm_table_part2,
this is done by the caller.
Do not call close_thread_tables() in mysql_create_table(),
this is done by the caller.
Fix a bug in DROP TABLE under LOCK TABLES when,
upon error in wait_while_table_is_used() we would mistakenly
release the metadata lock on a non-dropped table.
Explicitly release metadata locks when doing an implicit
commit.
sql/sql_trigger.cc:
Now that we delete lex->sphead in lex_end(),
zero the trigger's sphead in lex after loading
the trigger, to avoid double deletion.
sql/sql_udf.cc:
Use close_mysql_tables() instead of close_thread_tables().
sql/sys_vars.cc:
Remove code added in scope of WL#4284 which would
break when we perform set @@session.autocommit along
with setting other variables and using tables or functions.
A test case added to variables.test.
sql/transaction.cc:
Add asserts.
sql/tztime.cc:
Use close_mysql_tables() rather than close_thread_tables().
Problem: when SHOW BINLOG EVENTS was issued, it increased the value of
@@session.max_allowed_packet. This allowed a non-root user to increase
the amount of memory used by her thread arbitrarily. Thus, it removes
the bound on the amount of system resources used by a client, so it
presents a security risk (DoS attack).
Fix: it is correct to increase the value of @@session.max_allowed_packet
while executing SHOW BINLOG EVENTS (see BUG 30435). However, the
increase should only be temporary. Thus, the fix is to restore the value
when SHOW BINLOG EVENTS ends.
The value of @@session.max_allowed_packet is also increased in
mysql_binlog_send (i.e., the binlog dump thread). It is not clear if this
can cause any trouble, since normally the client that issues
COM_BINLOG_DUMP will not issue any other commands that would be affected
by the increased value of @@session.max_allowed_packet. However, we
restore the value just in case.
mysql-test/suite/rpl/r/rpl_packet.result:
update result file
mysql-test/suite/rpl/t/rpl_packet.test:
Add test that verifies that @@session.max_allowed_packet does not change
when issuing SHOW BINLOG EVENTS.
Make previous sub-test clean up.
Add comments listing the bugs in this test case.
sql/sql_repl.cc:
Restore the old value of thd->variables.max_allowed_packet at the
end of mysql_binlog_send and mysql_show_binlog_events.
