DB_COL_APPEARS_TWICE_IN_INDEX: Remove. This condition is already
checked and reported by MySQL before passing the index definition to
the storage engine.
row_create_index_for_mysql(): Remove the redundant check for
DB_COL_APPEARS_TWICE_IN_INDEX. When enforcing the column prefix index
limit, invoke dict_mem_index_free(index) to plug the memory leak. In
the loop, use index->n_def instead of dict_index_get_n_fields(index),
because the latter would be 0 for indexes that have not been copied to
the data dictionary cache.
innodb-use-sys-malloc.test:
Add test cases for attempting to trigger the error checks in
row_create_index_for_mysql(). Before MySQL 5.5 and WL#5743, the leak
is only reproducible if ha_innobase::max_supported_key_part_length()
returned a higher limit than the one used in
row_create_index_for_mysql().
In MySQL 5.5 and later, the leak is reproducible with
innodb_large_prefix=true.
rb:688 approved by Jimmy Yang
Fix a failure of the re-enabled innodb-index.test in the embedded server.
Apparently, the embedded server does not default to ENGINE=InnoDB when
copying an InnoDB table by CREATE TABLE t2 SELECT * FROM t1;
Re-enable a test that was disabled as collateral damage.
Starting with MySQL 5.5, queries will acquire and hold a shared meta-data lock
(MDL) on tables they process, until the transaction is committed or
rolled back. This will prevent DDL operations on the tables, such as creating
an index.
innodb-index.test: Use a second table for creating the index. The index will
still be "too new" for the transaction that was started before the index
creation was started.
The innoDB global variable srv_lower_case_table_names is set to the value of lower_case_table_names declared in mysqld.h server in ha_innodb.cc. Since this variable can change at runtime, it is reset for each handler call to ::create, ::open, ::rename_table & ::delete_table.
But it is possible for tables to be implicitly opened before an explicit handler call is made when an engine is first started or restarted. I was able to reproduce that with the testcase in this patch on a version of InnoDB from 2 weeks ago. It seemed like the change buffer entries for the secondary key was getting put into pages after the restart. (But I am not sure, I did not write down the call stack while it was reproducing.) In the current code, the implicit open, which is actually a call to dict_load_foreigns(), does not occur with this testcase.
The change is to replace srv_lower_case_table_names by an interface function in innodb.cc that retrieves the server global variable when it is needed.
causes future shutdown hang
InnoDB would hang on shutdown if any XA transactions exist in the
system in the PREPARED state. This has been masked by the fact that
MySQL would roll back any PREPARED transaction on shutdown, in the
spirit of Bug #12161 Xa recovery and client disconnection.
[mysql-test-run] do_shutdown_server: Interpret --shutdown_server 0 as
a request to kill the server immediately without initiating a
shutdown procedure.
xid_cache_insert(): Initialize XID_STATE::rm_error in order to avoid a
bogus error message on XA ROLLBACK of a recovered PREPARED transaction.
innobase_commit_by_xid(), innobase_rollback_by_xid(): Free the InnoDB
transaction object after rolling back a PREPARED transaction.
trx_get_trx_by_xid(): Only consider transactions whose
trx->is_prepared flag is set. The MySQL layer seems to prevent
attempts to roll back connected transactions that are in the PREPARED
state from another connection, but it is better to play it safe. The
is_prepared flag was introduced in the InnoDB Plugin.
trx_n_prepared: A new counter, counting the number of InnoDB
transactions in the PREPARED state.
logs_empty_and_mark_files_at_shutdown(): On shutdown, allow
trx_n_prepared transactions to exist in the system.
trx_undo_free_prepared(), trx_free_prepared(): New functions, to free
the memory objects of PREPARED transactions on shutdown. This is not
needed in the built-in InnoDB, because it would collect all allocated
memory on shutdown. The InnoDB Plugin needs this because of
innodb_use_sys_malloc.
trx_sys_close(): Invoke trx_free_prepared() on all remaining
transactions.
Bug#59410 read uncommitted: unlock row could not find a 3 mode lock
on the record
This bug is present only in 5.6 but I am adding the test case to earlier
versions to ensure it never appears in earlier versions too.
Setting lowercase_table_names to 2 on Windows causing Foreign Key problems
This problem was exposed by the fix for Bug#55222. There was a codepath in dict0load.c,
dict_load_foreigns() that made sure the table name matched case sensitive in order to
load a referenced table into the dictionary as needed. If an engine is rebooted which
accesses a table with foreign keys, and lower_case_table_names=2, then the table with
foreign keys will get an error when it is changed (insert/updated/delete).
Once the referenced tables are loaded into the dictionary cache by a select statement
on those tables, the same change would succeed because the affected code path would
not get followed.
"rows examined" estimates". This change implements "innodb_stats_method"
with options of "nulls_equal", "nulls_unequal" and "null_ignored".
rb://553 approved by Marko
- Second scenario checked:
Ensure via wait routines that the commit comes after the
processing of the statement which should get finally
the ER_LOCK_WAIT_TIMEOUT
--> This should prevent the current bug.
- First scenario checked:
Ensure via wait routines that the statement is already waiting
for getting the lock before the commit is given.
--> No effect on the current bug, but ensure that the right
scenario is reached.
- Take care that disconnects are finished before the test ends.
--> Reduce the potential to harm succeeding tests.
- "Mangle" the printout of the current default innodb_lock_wait_timeout value
--> No need to adjust the test in case the default gets changed in future.
--Bug#52157 various crashes and assertions with multi-table update, stored function
--Bug#54475 improper error handling causes cascading crashing failures in innodb/ndb
--Bug#57703 create view cause Assertion failed: 0, file .\item_subselect.cc, line 846
--Bug#57352 valgrind warnings when creating view
--Recently discovered problem when a nested materialized derived table is used
before being populated and it leads to incorrect result
We have several modes when we should disable subquery evaluation.
The reasons for disabling are different. It could be
uselessness of the evaluation as in case of 'CREATE VIEW'
or 'PREPARE stmt', or we should disable subquery evaluation
if tables are not locked yet as it happens in bug#54475, or
too early evaluation of subqueries can lead to wrong result
as it happened in Bug#19077.
Main problem is that if subquery items are treated as const
they are evaluated in ::fix_fields(), ::fix_length_and_dec()
of the parental items as a lot of these methods have
Item::val_...() calls inside.
We have to make subqueries non-const to prevent unnecessary
subquery evaluation. At the moment we have different methods
for this. Here is a list of these modes:
1. PREPARE stmt;
We use UNCACHEABLE_PREPARE flag.
It is set during parsing in sql_parse.cc, mysql_new_select() for
each SELECT_LEX object and cleared at the end of PREPARE in
sql_prepare.cc, init_stmt_after_parse(). If this flag is set
subquery becomes non-const and evaluation does not happen.
2. CREATE|ALTER VIEW, SHOW CREATE VIEW, I_S tables which
process FRM files
We use LEX::view_prepare_mode field. We set it before
view preparation and check this flag in
::fix_fields(), ::fix_length_and_dec().
Some bugs are fixed using this approach,
some are not(Bug#57352, Bug#57703). The problem here is
that we have a lot of ::fix_fields(), ::fix_length_and_dec()
where we use Item::val_...() calls for const items.
3. Derived tables with subquery = wrong result(Bug19077)
The reason of this bug is too early subquery evaluation.
It was fixed by adding Item::with_subselect field
The check of this field in appropriate places prevents
const item evaluation if the item have subquery.
The fix for Bug19077 fixes only the problem with
convert_constant_item() function and does not cover
other places(::fix_fields(), ::fix_length_and_dec() again)
where subqueries could be evaluated.
Example:
CREATE TABLE t1 (i INT, j BIGINT);
INSERT INTO t1 VALUES (1, 2), (2, 2), (3, 2);
SELECT * FROM (SELECT MIN(i) FROM t1
WHERE j = SUBSTRING('12', (SELECT * FROM (SELECT MIN(j) FROM t1) t2))) t3;
DROP TABLE t1;
4. Derived tables with subquery where subquery
is evaluated before table locking(Bug#54475, Bug#52157)
Suggested solution is following:
-Introduce new field LEX::context_analysis_only with the following
possible flags:
#define CONTEXT_ANALYSIS_ONLY_PREPARE 1
#define CONTEXT_ANALYSIS_ONLY_VIEW 2
#define CONTEXT_ANALYSIS_ONLY_DERIVED 4
-Set/clean these flags when we perform
context analysis operation
-Item_subselect::const_item() returns
result depending on LEX::context_analysis_only.
If context_analysis_only is set then we return
FALSE that means that subquery is non-const.
As all subquery types are wrapped by Item_subselect
it allow as to make subquery non-const when
it's necessary.
mysql-test/r/derived.result:
test case
mysql-test/r/multi_update.result:
test case
mysql-test/r/view.result:
test case
mysql-test/suite/innodb/r/innodb_multi_update.result:
test case
mysql-test/suite/innodb/t/innodb_multi_update.test:
test case
mysql-test/suite/innodb_plugin/r/innodb_multi_update.result:
test case
mysql-test/suite/innodb_plugin/t/innodb_multi_update.test:
test case
mysql-test/t/derived.test:
test case
mysql-test/t/multi_update.test:
test case
mysql-test/t/view.test:
test case
sql/item.cc:
--removed unnecessary code
sql/item_cmpfunc.cc:
--removed unnecessary checks
--THD::is_context_analysis_only() is replaced with LEX::is_ps_or_view_context_analysis()
sql/item_func.cc:
--refactored context analysis checks
sql/item_row.cc:
--removed unnecessary checks
sql/item_subselect.cc:
--removed unnecessary code
--added DBUG_ASSERT into Item_subselect::exec()
which asserts that subquery execution can not happen
if LEX::context_analysis_only is set, i.e. at context
analysis stage.
--Item_subselect::const_item()
Return FALSE if LEX::context_analysis_only is set.
It prevents subquery evaluation in ::fix_fields &
::fix_length_and_dec at context analysis stage.
sql/item_subselect.h:
--removed unnecessary code
sql/mysql_priv.h:
--Added new set of flags.
sql/sql_class.h:
--removed unnecessary code
sql/sql_derived.cc:
--added LEX::context_analysis_only analysis intialization/cleanup
sql/sql_lex.cc:
--init LEX::context_analysis_only field
sql/sql_lex.h:
--New LEX::context_analysis_only field
sql/sql_parse.cc:
--removed unnecessary code
sql/sql_prepare.cc:
--removed unnecessary code
--added LEX::context_analysis_only analysis intialization/cleanup
sql/sql_select.cc:
--refactored context analysis checks
sql/sql_show.cc:
--added LEX::context_analysis_only analysis intialization/cleanup
sql/sql_view.cc:
--added LEX::context_analysis_only analysis intialization/cleanup
Auto increment value wraps when performing a bulk insert with
auto_increment_increment and auto_increment_offset greater than
one.
The fix:
If overflow happened then return MAX_ULONGLONG value as an
indication of overflow and check this before storing the
value into the field in update_auto_increment().
mysql-test/r/auto_increment.result:
test case
mysql-test/suite/innodb/r/innodb-autoinc.result:
test case fix
mysql-test/suite/innodb/t/innodb-autoinc.test:
test case fix
mysql-test/suite/innodb_plugin/r/innodb-autoinc.result:
test case fix
mysql-test/suite/innodb_plugin/t/innodb-autoinc.test:
test case fix
mysql-test/t/auto_increment.test:
test case
sql/handler.cc:
If overflow happened then return MAX_ULONGLONG value as an
indication of overflow and check this before storing the
value into the field in update_auto_increment().
