This worklog aims at testing the two following scenarios:
1) Whenever the mysql_binlog_send method (dump thread)
reaches the end of file when reading events from the binlog, before
checking if it should wait for more events, there was a test to
check if the file being read was still active, i.e, it was the last
known binlog. However, it was possible that something was written to
the binary log and then a rotation would happen, after EOF was
detected and before the check for active was performed. In this
case, the end of the binary log would not be read by the dump
thread, and this would cause the slave to lose updates.
This test verifies that the problem has been fixed. It waits during
this window while forcing a rotation in the binlog.
2) Verify dump thread can send events in active file, correctly after
encountering an IO error.
INDEX_READ_MAP HAD NO MATCH
If index_read_map is called for exact search and no matching records
exists it will position the cursor on the next record, but still having the
relative position to BTR_PCUR_ON.
This will make a call for index_next to read yet another next record,
instead of returning the record the cursor points to.
Fixed by setting pcur->rel_pos = BTR_PCUR_BEFORE if an exact
[prefix] search is done, but failed.
Also avoids optimistic restoration if rel_pos != BTR_PCUR_ON,
since btr_cur may be different than old_rec.
rb#3324, approved by Marko and Jimmy
DURING INNODB RECOVERY
Problem:
=======
The connection 'master' is dropped by mysqltest after
rpl_end.inc. At this point, dropping temporary tables
at the connection 'master' are not synced at slave.
So, the temporary tables replicated from master remain
on slave leading to an inconsistent close of the test.
The following test thus complains about the presence of
temporary table(s) left over from the previous test.
Fix:
===
- Put explicit drop commands in replication tests so
that the temporary tables are dropped at slave as well.
- Added the check for Slave_open_temp_tables in
mtr_check.sql to warn about the remaining temporary
table, if any, at the close of a test.
IT IS DONE IN-PLACE
With change buffer enabled, InnoDB doesn't write a transaction log
record when it merges a record from the insert buffer to an secondary
index page if the insertion is performed as an update-in-place.
Fixed by logging the 'update-in-place' operation on secondary index
pages.
Approved by Marko. rb#2429
THAN LOCALHOST
This is a test bug and the explanation for the behaviour can be found
on the bug page.Modifying the select to select user where user!=root for the line where
failure is encountered on machines with no hostname other than the localhost.
"SHOW PROCESSLIST"
Analysis:
----------
The problem here is, if one connection changes its
default db and at the same time another connection executes
"SHOW PROCESSLIST", when it wants to read db of the another
connection then there is a chance of accessing the invalid
memory.
The db name stored in THD is not guarded while changing user
DB and while reading the user DB in "SHOW PROCESSLIST".
So, if THD.db is freed by thd "owner" thread and if another
thread executing "SHOW PROCESSLIST" statement tries to read
and copy THD.db at the same time then we may endup in the issue
reported here.
Fix:
----------
Used mutex "LOCK_thd_data" to guard THD.db while freeing it
and while copying it to processlist.
STATUS OF ROLLBACKED TRANSACTION" and bug #17054007 - "TRANSACTION
IS NOT FULLY ROLLED BACK IN CASE OF INNODB DEADLOCK".
The problem in the first bug report was that although deadlock involving
metadata locks was reported using the same error code and message as InnoDB
deadlock it didn't rollback transaction like the latter. This caused
confusion to users as in some cases after ER_LOCK_DEADLOCK transaction
could have been restarted immediately and in some cases rollback was
required.
The problem in the second bug report was that although InnoDB deadlock
caused transaction rollback in all storage engines it didn't cause release
of metadata locks. So concurrent DDL on the tables used in transaction was
blocked until implicit or explicit COMMIT or ROLLBACK was issued in the
connection which got InnoDB deadlock.
The former issue has stemmed from the fact that when support for detection
and reporting metadata locks deadlocks was added we erroneously assumed
that InnoDB doesn't rollback transaction on deadlock but only last statement
(while this is what happens on InnoDB lock timeout actually) and so didn't
implement rollback of transactions on MDL deadlocks.
The latter issue was caused by the fact that rollback of transaction due
to deadlock is carried out by setting THD::transaction_rollback_request
flag at the point where deadlock is detected and performing rollback
inside of trans_rollback_stmt() call when this flag is set. And
trans_rollback_stmt() is not aware of MDL locks, so no MDL locks are
released.
This patch solves these two problems in the following way:
- In case when MDL deadlock is detect transaction rollback is requested
by setting THD::transaction_rollback_request flag.
- Code performing rollback of transaction if THD::transaction_rollback_request
is moved out from trans_rollback_stmt(). Now we handle rollback request
on the same level as we call trans_rollback_stmt() and release statement/
transaction MDL locks.
IN TIME RECOVERY FAILURE ON SLAVES
Problem:
DROP TEMP TABLE IF EXISTS commands can cause point
in time recovery (re-applying binlog) failures.
Analyses:
In RBR, 'DROP TEMPORARY TABLE' commands are
always binlogged by adding 'IF EXISTS' clauses.
Also, the slave SQL thread will not check replicate.* filter
rules for "DROP TEMPORARY TABLE IF EXISTS" queries.
If log-slave-updates is enabled on slave, these queries
will be binlogged in the format of "USE `db`;
DROP TEMPORARY TABLE IF EXISTS `t1`;" irrespective
of filtering rules and irrespective of the `db` existence.
When users try to recover slave from it's own binlog,
use `db` command might fail if `db` is not present on slave.
Fix:
At the time of writing the 'DROP TEMPORARY TABLE
IF EXISTS' query into the binlog, 'use `db`' will not be
present and the table name in the query will be a fully
qualified table name.
Eg:
'USE `db`; DROP TEMPORARY TABLE IF EXISTS `t1`;'
will be logged as
'DROP TEMPORARY TABLE IF EXISTS `db`.`t1`;'.
Problem:
sys_vars.rpl_init_slave_func test was failing sporadically
on 5.5+.
Fix:
Added assert condition after wait for checks.
Recorded test and enabled it.
BUG#12535301- SYS_VARS.RPL_INIT_SLAVE_FUNC MISMATCHES IN DAILY-5.5
Problem:
sys_vars.rpl_init_slave_func test was not recorded after
the last edit. It was disabled on 5.1 after seeing failures
due to the above reason.
No old failures as this suite never ran with pb2 on 5.1
Fix:
Added assert condition after wait for checks.
Recorded test and enabled it.
TO INCONSISTENCY
PROBLEM
--------
When we drop a partitoned table , we first gather the
information about partitions in the table from the
table_name.par file and store it in an internal data
structure.Then we delete this file and the data in
the table. If the server crashes after deleting the
file,then after recovering we cannot access the table
.Even we cannot drop the table ,because drop algorithm
requires par file to read the partition information.
FIX
---
1. We move the part of deleting par file after deleting
all the table data from the storage egine.
2. During drop operation if we detect that the par
file is missing then we delete the .frm file,since
there is no way of recovering without par file.
[Approved by Mattias rb#2576 ]
BY BINLOG_KILLED_SIMULATE.TEST
'mysqbinlog' tool creates a temporary file while
preparing LOAD DATA QUERY. These files needs to be deleted
at the end of the test script otherwise these files are
left out in the daily-run machines, causing
"no space on device issues"
Fix:
Delete them at the end of these test scripts
1) execute mysqlbinlog with --local-load option to
create these files in a specified tmpdir
2) delete the tmpdir at the end of the test script
USING THE PLUGIN INTERFACE.
ISSUE: No support for floating-point plugin
system variables.
SOLUTION: Allowing plugins to define and expose floating-point
system variables of type double. MYSQL_SYSVAR_DOUBLE
and MYSQL_THDVAR_DOUBLE are added.
ISSUE: Fractional part of the def, min, max values of system
variables are ignored.
SOLUTION: Adding functions that are used to store the raw
representation of a double in the raw bits of unsigned
longlong in a way that the binary representation
remains the same.
WITH COMPOSITE KEY COLUMNS
Problem:-
While running a SELECT query with several AGGR(DISTINCT) function
and these are referring to different field of same composite key,
Returned incorrect value.
Analysis:-
In a table, where we have composite key like (a,b,c)
and when we give a query like
select COUNT(DISTINCT b), SUM(DISTINCT a) from ....
here, we first make a list of items in Aggr(distinct) function
(which is a, b), where order of item doesn't matter.
and then we see, whether we have a composite key where the prefix
of index columns matches the items of the aggregation function.
(in this case we have a,b,c).
if yes, so we can use loose index scan and we need not perform
duplicate removal to distinct in our aggregate function.
In our table, we traverse column marked with <-- and get the result as
(a,b,c) count(distinct b) sum(distinct a)
treated as count b treated as sum(a)
(1,1,2)<-- 1 1
(1,2,2)<-- 1++=2 1+1=2
(1,2,3)
(2,1,2)<-- 2++=3 1+1+2=4
(2,2,2)<-- 3++=4 1+1+2+2=6
(2,2,3)
result will be 4,6, but it should be (2,3)
As in this case, our assumption is incorrect. If we have
query like
select count(distinct a,b), sum(distinct a,b)from ..
then we can use loose index scan
Solution:-
In our query, when we have more then one aggr(distinct) function
then they should refer to same fields like
select count(distinct a,b), sum(distinct a,b) from ..
-->we can use loose scan index as both aggr(distinct) refer to same fields a,b.
If they are referring to different field like
select count(distinct a), sum(distinct b) from ..
-->will not use loose scan index as both aggr(distinct) refer to different fields.
WITH A PORT NUMBER ENCLOSED IN QUOTES
Problem: mysqldump --dump-slave --include-master-host-port
prints the CHANGE MASTER command in the generated logical
backup. The PORT number that is generated with this command
is a string and should be an integer.
Fix: Remove the Enclosed quotes for port number.
SCHEDULER DROPS EVENTS
Problem: On a semi sync enabled server (Master/Slave),
if event scheduler drops an event after completion,
server crashes.
Analaysis: If an event is created with "ON COMPLETION
NOT PRESERVE" clause, event scheduler deletes the event
upon event completion(expiration) and the thread object
will be destroyed. In the destructor of the thread object,
mysys_var member is set to zero explicitly. Later from
the same destructor call(same execution path),
incase of semi sync enabled server, while cleanup is called,
THD::mysys_var member is accessed by THD::enter_cond()
function which causes server to crash.
Fix: mysys_var should not be explicitly set to zero and
also it is not required.
sql/sql_class.cc:
mysys_var should not be explicitly set to zero.
--BINLOG-IGNORE-DB AND FULLY QUALIFIED TABLE
Problem:
=======
An ALTER TABLE statement is not written to binlog if server
started with "--binlog-ignore-db some database" and 'fully
qualified' table names are used in the ALTER TABLE statement
altering table different from current database context.
Analysis:
========
The above mentioned problem not only affects "ALTER TABLE"
statements but also to all kind of statements. Once the
current default database becomes "NULL" none of the
statements will be binlogged.
The current behaviour is such that if the user has specified
restrictions on which database needs to be replicated and the
default db is not specified, then do not replicate.
This means that "NULL" is considered to be equivalent to
everything (default db = null implied ignore don't log the
statement).
Fix:
===
"NULL" should not be considered as equivalent to everything.
Since the filtering criteria is not equal to "NULL" the
statement should be logged into binlog.
mysql-test/suite/rpl/r/rpl_loaddata_m.result:
Earlier when defalut database was "NULL" DROP TABLE
was not getting logged. Post this fix it will be logged
and the DROP will fail at slave as the table creation
was skipped by master as --binlog-ignore-db=test.
mysql-test/suite/rpl/t/rpl_loaddata_m.test:
Earlier when defalut database was "NULL" DROP TABLE
was not getting logged. Post this fix it will be logged
and the DROP will fail at slave as the table creation
was skipped by master as --binlog-ignore-db=test.
sql/rpl_filter.cc:
Replaced DBUG_RETURN(0) with DBUG_RETURN(1).
(Based on Sinisa's patch)
Added a version checking facility to mysql_upgrade.
The versions used for checking is the version of the
server that mysql_upgrade is going to upgrade and the
server version that mysql_upgrade was build/distributed
with.
Also added an option '--version-check' to enable/disable
the version checking.
