- Setting up a A->B->A replication causes relay logs being written
by the master, remove them when test is finished
mysql-test/t/rpl_dual_pos_advance.test:
Cleanup files created by test case in var/run directory
Removed wrong fix for the bug#27006.
The bug was added by the fix for the bug#19978 and fixed by Monty on 2007/02/21.
trigger.test, trigger.result:
Corrected test case for the bug#27006.
sql/sql_insert.cc:
Removed wrong fix for the bug#27006.
The bug was added by the fix for the bug#19978 and fixed by Monty on 2007/02/21.
mysql-test/t/trigger.test:
Corrected test case for the bug#27006.
mysql-test/r/trigger.result:
Corrected test case for the bug#27006.
into bodhi.local:/opt/local/work/mysql-5.0-runtime
sql/field.cc:
Auto merged
sql/item.cc:
Auto merged
sql/item.h:
Auto merged
sql/item_func.cc:
Auto merged
sql/sp_head.cc:
Auto merged
sql/sql_base.cc:
Auto merged
sql/sql_select.cc:
Auto merged
sql/sql_show.cc:
Auto merged
sql/sql_table.cc:
Auto merged
sql/sql_yacc.yy:
Auto merged
mysql-test/r/sp.result:
SCCS merged
mysql-test/t/sp.test:
SCCS merged
Using a MEMORY table BTREE index for scanning for updatable rows
could lead to an infinite loop.
Everytime a key was inserted into a btree index, the position
in the index scan was cleared. The search started from the
beginning and found the same key again.
Now we do not clear the position on key insert an more.
heap/hp_write.c:
Bug#26996 - Update of a Field in a Memory Table ends with wrong result
Removed the index-scan-breaking nulling of last_pos.
The comment behind this line ("For heap_rnext/heap_rprev")
was misleading. It should have been "Breaks heap_rnext/heap_rprev".
mysql-test/r/heap_btree.result:
Bug#26996 - Update of a Field in a Memory Table ends with wrong result
Added test result.
mysql-test/t/heap_btree.test:
Bug#26996 - Update of a Field in a Memory Table ends with wrong result
Added test.
- Build sql files for netware from the mysql_system_tables*.sq files
- Fix comments about mysql_create_system_tables.sh
- Use mysql_install_db.sh to create system tables for mysql_test-run-shell
- Fix mysql-test-run.pl to also look in share/mysql for the msyql_system*.sql files
Changeset coded today by Magnus Svensson, just the application to 5.0.38 is by Joerg Bruehe.
BitKeeper/deleted/.del-init_db.sql~e2b8d0c8390e8023:
Delete: netware/init_db.sql
BitKeeper/deleted/.del-test_db.sql:
Delete: netware/test_db.sql
BitKeeper/etc/ignore:
Added netware/init_db.sql netware/test_db.sql to the ignore list
mysql-test/install_test_db.sh:
Use mysql_install_db from install_test_db(which is used by mysql-test-run-shell)
to install the system tables
mysql-test/mysql-test-run.pl:
Look for the mysql_system_tables*.sql also in share/mysql
netware/Makefile.am:
Build netware/init_db.sql and netware/test_db.sql from
the sources in scripts/msyql_system_tables*.sql
scripts/make_binary_distribution.sh:
netware/init_db.sql and netware/test_db.sql are now built by the Makefiles
from the scripts/mysql_system_tables*.sql files
sql/mysql_priv.h:
Update comment remindging to update the MySQL system table definitions
when adding a new SQL_MODE
sql/sql_acl.h:
Update comment reminding to update the MySQL System tables
when changing the ACL defines
mysql-test/r/loaddata.result:
Fix bug#27212: Do not try to read a file which is not contained in a binary distribution,
because it will be missing when the tests are run during release build or by a customer.
mysql-test/t/loaddata.test:
Fix bug#27212: Do not try to read a file which is not contained in a binary distribution,
because it will be missing when the tests are run during release build or by a customer.
- Build sql files for netware from the mysql_system_tables*.sq files
- Fix comments about mysql_create_system_tables.sh
- Use mysql_install_db.sh to create system tables for mysql_test-run-shell
- Fix mysql-test-run.pl to also look in share/mysql for the msyql_system*.sql files
BitKeeper/deleted/.del-init_db.sql~e2b8d0c8390e8023:
Rename: netware/init_db.sql -> BitKeeper/deleted/.del-init_db.sql~e2b8d0c8390e8023
BitKeeper/deleted/.del-test_db.sql:
Rename: netware/test_db.sql -> BitKeeper/deleted/.del-test_db.sql
BitKeeper/etc/ignore:
Added netware/init_db.sql netware/test_db.sql to the ignore list
mysql-test/install_test_db.sh:
Use mysql_install_db from install_test_db(which is used bu mysql-test-run-shell)
to install the system tables
mysql-test/mysql-test-run.pl:
Look for the mysql_system_tables*.sql also in share/mysql
netware/Makefile.am:
Build netware/init_db.sql and netware/test_db.sql from
the sources in scripts/msyql_system_tables*.sql
scripts/make_binary_distribution.sh:
netware/init_db.sql and netware/test_db.sql are now built by the Makefiles
from the scripts/mysql_system_tables*.sql files
sql/mysql_priv.h:
Update comment remindging to update the MySQL system table definitions
when adding a new SQL_MODE
sql/sql_acl.h:
Update comment reminding to update the MySQL System tables
when changing the ACL defines
Problem: to handle a situation when the size of event on the master is greater than max_allowed_packet on slave, we checked for the wrong constant (ER_NET_PACKET_TOO_LARGE instead of CR_NET_PACKET_TOO_LARGE).
Solution: test for the client "packet too large" error code instead of the server one in slave I/O thread.
mysql-test/r/rpl_packet.result:
Added test case for bug #23775 "Replicated event larger that max_allowed_packet infinitely re-transmits"
mysql-test/t/rpl_packet.test:
Added test case for bug #23775 "Replicated event larger that max_allowed_packet infinitely re-transmits"
sql/slave.cc:
Test for the client "packet too large" error code instead of the server one in slave I/O thread.
UPDATE if the row wasn't actually changed.
This bug was caused by fix for bug#19978. It causes AFTER UPDATE triggers
not firing if a row wasn't actually changed by the update part of the
INSERT .. ON DUPLICATE KEY UPDATE.
Now triggers are always fired if a row is touched by the INSERT ... ON
DUPLICATE KEY UPDATE.
sql/sql_insert.cc:
Bug#27006: AFTER UPDATE triggers not fired with INSERT ... ON DUPLICATE KEY
UPDATE if the row wasn't actually changed.
Now triggers are always fired if a row is touched by the INSERT ... ON
DUPLICATE KEY UPDATE.
mysql-test/r/trigger.result:
Added a test case for the bug#27006: AFTER UPDATE triggers not fired with INSERT ... ON DUPLICATE KEY
UPDATE if the row wasn't actually changed.
mysql-test/t/trigger.test:
Added a test case for the bug#27006: AFTER UPDATE triggers not fired with INSERT ... ON DUPLICATE KEY
UPDATE if the row wasn't actually changed.
- Stored procedures returning unsinged values returns signed values if
text protocol is used. The reason is that the stored proceedure item
Item_func_sp wasn't initializing the member variables properly based
on the information contained in the associated result field.
- The patch is to upon field-item association, ::fix_fields, initialize
the member variables in appropriate order.
- Field type of an Item_func_sp was hard coded to MYSQL_TYPE_VARCHAR.
This is changed to return the type of the actual result field.
- Member function name sp_result_field was refactored to the more
appropriate init_result_field.
- Member function name find_and_check_access was refactored to
sp_check_access.
mysql-test/r/sp.result:
- Added test
mysql-test/t/sp.test:
- Added test
sql/item_func.cc:
Bug#20777 Function w BIGINT UNSIGNED shows diff. behaviour with and without --ps-protocol
- Stored procedures returning unsinged values returns signed values if
text protocol is used. The reason is that the stored proceedure item
Item_func_sp wasn't initializing the member variables properly based
on the information contained in the associated result field.
- The patch is to upon field-item association, ::fix_fields, initialize
the member variables in appropriate order.
- Field type of an Item_func_sp was hard coded to MYSQL_TYPE_VARCHAR.
This is changed to to return the type of the actual result field.
- Member function name sp_result_field was refactored to the more
appropriate init_result_field.
- Member function name find_and_check_access was refactored to
sp_check_access.
sql/item_func.h:
Bug#20777 Function w BIGINT UNSIGNED shows diff. behaviour with and without --ps-protocol
- Stored procedures returning unsinged values returns signed values if
text protocol is used. The reason is that the stored proceedure item
Item_func_sp wasn't initializing the member variables properly based
on the information contained in the associated result field.
- The patch is to upon field-item association, ::fix_fields, initialize
the member variables in appropriate order.
- Field type of an Item_func_sp was hard coded to MYSQL_TYPE_VARCHAR.
This is changed to to return the type of the actual result field.
- Member function name sp_result_field was refactored to the more
appropriate init_result_field.
- Member function name find_and_check_access was refactored to
sp_check_access.
when index is used
When the table contained TEXT columns with empty contents
('', zero length, but not NULL) _and_ strings starting with
control characters like tabulator or newline, the empty values
were not found in a "records in range" estimate. Hence count(*)
missed these records.
The reason was a different set of search flags used for key
insert and key range estimation.
I decided to fix the set of flags used in range estimation.
Otherwise millions of databases around the world would require
a repair after an upgrade.
The consequence is that the manual must be fixed, which claims
that TEXT columns are compared with "end space padding". This
is true for CHAR/VARCHAR but wrong for TEXT. See also bug 21335.
myisam/mi_range.c:
Bug#26231 - select count(*) on myisam table returns wrong value
when index is used
Added SEARCH_UPDATE to the search flags so that it compares
like write/update/delete operations do. Only so it expects
the keys at the place where they have been inserted.
myisam/mi_search.c:
Bug#26231 - select count(*) on myisam table returns wrong value
when index is used
Added some comments to explain how _mi_get_binary_pack_key()
works.
mysql-test/r/myisam.result:
Bug#26231 - select count(*) on myisam table returns wrong value
when index is used
Added a test.
mysql-test/t/myisam.test:
Bug#26231 - select count(*) on myisam table returns wrong value
when index is used
Added test result.
into magare.gmz:/home/kgeorge/mysql/autopush/B26261-5.0-opt
sql/mysql_priv.h:
Auto merged
sql/sql_insert.cc:
Auto merged
sql/sql_prepare.cc:
Auto merged
mysql-test/r/insert_update.result:
SCCS merged
mysql-test/t/insert_update.test:
SCCS merged
INSERT uses query_id to verify what fields are
mentioned in the fields list of the INSERT command.
However the check for that is made after the
ON DUPLICATE KEY is processed. This causes all
the fields mentioned in ON DUPLICATE KEY to be
considered as mentioned in the fields list of
INSERT.
Moved the check up, right after processing the
fields list.
mysql-test/r/insert_update.result:
Bug #26261: test case
mysql-test/t/insert_update.test:
Bug #26261: test case
sql/mysql_priv.h:
Bug #26261: moved the check inside mysql_prepare_insert
sql/sql_insert.cc:
Bug #26261: move the check inside mysql_prepare_insert
before setting up the ON DUPLICATE KEY part
sql/sql_prepare.cc:
Bug #26261: moved the check inside mysql_prepare_insert
The crash happens when 'skip-grant-tables' is enabled.
We skip the filling of I_S privilege tables
if acl_cache is not initialized.
mysql-test/r/skip_grants.result:
test result
mysql-test/t/skip_grants.test:
test case
sql/sql_acl.cc:
skip filling of I_S privilege tables
if acl_cache is not initialized
touched but not actually changed.
The LAST_INSERT_ID() is reset to 0 if no rows were inserted or changed.
This is the case when an INSERT ... ON DUPLICATE KEY UPDATE updates a row
with the same values as the row contains.
Now the LAST_INSERT_ID() values is reset to 0 only if there were no rows
successfully inserted or touched.
The new 'touched' field is added to the COPY_INFO structure. It holds the
number of rows that were touched no matter whether they were actually
changed or not.
sql/sql_class.h:
Bug#27033: 0 as LAST_INSERT_ID() after INSERT .. ON DUPLICATE if rows were
touched but not actually changed.
The new 'touched' field is added to the COPY_INFO structure. It holds the
number of rows that were touched no matter whether they were actually
changed or not.
mysql-test/r/insert_update.result:
Added a test case for the bug#27033: 0 as LAST_INSERT_ID() after INSERT .. ON DUPLICATE if rows were
touched but not actually changed.
mysql-test/t/insert_update.test:
Added a test case for the bug#27033: 0 as LAST_INSERT_ID() after INSERT .. ON DUPLICATE if rows were
touched but not actually changed.
sql/sql_insert.cc:
Bug#27033: 0 as LAST_INSERT_ID() after INSERT .. ON DUPLICATE if rows were
touched but not actually changed.
Now the LAST_INSERT_ID() values is reset to 0 only if there were no rows
successfully inserted or touched.
Altering to a decimal field we get double value then store it
that may cause data loss.
Fix: use store_decimal() instead.
mysql-test/r/type_newdecimal.result:
Fix for bug #24558: Increasing decimal column length causes data loss
- test result.
mysql-test/t/type_newdecimal.test:
Fix for bug #24558: Increasing decimal column length causes data loss
- test case.
sql/field_conv.cc:
Fix for bug #24558: Increasing decimal column length causes data loss
- if target field's result type is DECIMAL_RESULT
use store_decimal(val_decimal()) in order not to loss data.
Before this fix, the parser would accept illegal code in SQL exceptions
handlers, that later causes the runtime to crash when executing the code,
due to memory violations in the exception handler stack.
The root cause of the problem is instructions within an exception handler
that jumps to code located outside of the handler. This is illegal according
to the SQL 2003 standard, since labels located outside the handler are not
supposed to be visible (they are "out of scope"), so any instruction that
jumps to these labels, like ITERATE or LEAVE, should not parse.
The section of the standard that is relevant for this is :
SQL:2003 SQL/PSM (ISO/IEC 9075-4:2003)
section 13.1 <compound statement>,
syntax rule 4
<quote>
The scope of the <beginning label> is CS excluding every <SQL schema
statement> contained in CS and excluding every
<local handler declaration list> contained in CS. <beginning label> shall
not be equivalent to any other <beginning label>s within that scope.
</quote>
With this fix, the C++ class sp_pcontext, which represent the "parsing
context" tree (a.k.a symbol table) of a stored procedure, has been changed
as follows:
- constructors have been cleaned up, so that only building a root node for
the tree is public; building nodes inside a tree is not public.
- a new member, m_label_scope, indicates if a given syntactic context
belongs to a DECLARE HANDLER block,
- label resolution, in the method find_label(), has been changed to
implement the restriction of scope regarding labels used in a compound
statement.
The actions in the parser, when parsing the body of a SQL exception handler,
have been changed as follows:
- the implementation of an exception handler (DECLARE HANDLER) now creates
explicitly a new sp_pcontext, to isolate the code inside the handler from
the containing compound statement context.
- registering exception handlers as a result occurs in the parent context,
see the rule sp_hcond_element
- the code in sp_hcond_list has been cleaned up, to avoid code duplication
In addition, the flags IN_SIMPLE_CASE and IN_HANDLER, declared in sp_head.h
have been removed, since they are unused and broken by design (as seen with
Bug 19194 (Right recursion in parser for CASE causes excessive stack usage,
limitation), representing a stack in a single flag is not possible.
Tests in sp-error have been added to show that illegal constructs are now
rejected.
Tests in sp have been added for code coverage, to show that ITERATE or LEAVE
statements are legal when jumping to a label in scope, inside the body of
an exception handler.
mysql-test/r/sp-error.result:
SQL Exception handlers define a parsing context for label resolution.
mysql-test/r/sp.result:
SQL Exception handlers define a parsing context for label resolution.
mysql-test/t/sp-error.test:
SQL Exception handlers define a parsing context for label resolution.
mysql-test/t/sp.test:
SQL Exception handlers define a parsing context for label resolution.
sql/sp_head.cc:
Minor cleanup
sql/sp_head.h:
Minor cleanup
sql/sp_pcontext.cc:
SQL Exception handlers define a parsing context for label resolution.
sql/sp_pcontext.h:
SQL Exception handlers define a parsing context for label resolution.
sql/sql_yacc.yy:
SQL Exception handlers define a parsing context for label resolution.
Different set of conditions is used to verify
the validity of index definitions over a GEOMETRY
column in ALTER TABLE and CREATE TABLE.
The difference was on how sub-keys notion validity
is checked.
Fixed by extending the CREATE TABLE condition to
support the cases allowed in ALTER TABLE.
Made the SHOW CREATE TABLE not to display spatial
indexes using the sub-key notion.
mysql-test/r/alter_table.result:
Bug #26794: test case
mysql-test/r/gis-rtree.result:
Bug #26794: fixed SHOW CREATE TABLE output.
mysql-test/t/alter_table.test:
Bug #26794: test case
sql/field.cc:
Bug #26794: Allow sub-keys for GEOMETRY
sql/sql_show.cc:
Bug #26794: Don't show sub-key notion
in SHOW CREATE TABLE for SPATIAL indexes.
sql/sql_table.cc:
Bug #26794: Allow sub-keys for GEOMETRY
into mysql.com:/home/svoj/devel/mysql/BUG26881/mysql-5.0-engines
myisam/mi_create.c:
Auto merged
mysql-test/t/merge.test:
Auto merged
sql/ha_myisam.cc:
Auto merged
sql/sql_parse.cc:
Use local.
mysql-test/r/merge.result:
SCCS merged
differences in tables
Certain merge tables were wrongly reported as having incorrect definition:
- Some fields that are 1 byte long (e.g. TINYINT, CHAR(1)), might
be internally casted (in certain cases) to a different type on a
storage engine layer. (affects 4.1 and up)
- If tables in a merge (and a MERGE table itself) had short VARCHAR column (less
than 4 bytes) and at least one (but not all) tables were ALTER'ed (even to an
identical table: ALTER TABLE xxx ENGINE=yyy), table definitions went ouf of
sync. (affects 4.1 only)
This is fixed by relaxing a check for underlying conformance and setting
field type to FIELD_TYPE_STRING in case varchar is shorter than 4
when a table is created.
myisam/mi_create.c:
Added a comment.
mysql-test/r/merge.result:
A test case for bug#26881.
mysql-test/t/merge.test:
A test case for bug#26881.
sql/ha_myisam.cc:
Relaxed some checks performed by check_definition():
As comparing of fulltext keys (and key segments) is not yet implemented,
only return an error in case one of keys is fulltext and other is not.
Otherwise, if both keys are fulltext, accept them as is.
As comparing of spatial keys (and key segments) is not yet implemented,
only return an error in case one of keys is spatial and other is not.
Otherwise, if both keys are spatial, accept them as is.
A workaround to handle situation when field is casted from FIELD_SKIP_ZERO
to FIELD_NORMAL. This could happen only in case field length is 1 and row
format is fixed.
sql/sql_parse.cc:
When a table that has varchar field shorter than 4 is created, field type is
set to FIELD_TYPE_VAR_STRING. Later, when a table is modified using alter
table, field type is changed to FIELD_TYPE_STRING (see Field_string::type).
That means HA_OPTION_PACK_RECORD flag might be lost and thus null_bit might
be shifted by alter table, in other words alter table doesn't create 100%
equal table definition.
This is usually not a problem, since when a table is created/altered,
definition on a storage engine layer is based on one that is passed from
sql layer. But it is a problem for merge engine - null_bit is shifted when
a table (merge or underlying) is altered.
Set field type to FIELD_TYPE_STRING in case FIELD_TYPE_VAR_STRING is shorter
than 4 when a table is created as it is done in Field::type.
when the column is to be read from a derived table column which
was specified as a concatenation of string literals.
The bug happened because the Item_string::append did not adjust the
value of Item_string::max_length. As a result of it the temporary
table column defined to store the concatenation of literals was
not wide enough to hold the whole value.
mysql-test/r/subselect.result:
Added a test case for bug #26738.
mysql-test/t/subselect.test:
Added a test case for bug #26738.
after single-row table substitution could lead to a wrong result set.
The bug happened because the function Item_field::replace_equal_field
erroniously assumed that any field included in a multiple equality
with a constant has been already substituted for this constant.
This not true for fields becoming constant after row substitutions
for constant tables.
mysql-test/r/select.result:
Added a test case for bug #26963.
mysql-test/t/select.test:
Added a test case for bug #26963.
sql/item.cc:
Fixed bug #26963: invalid optimization of the pushdown conditions
after single-row table substitution could lead to a wrong result set.
The bug happened because the function Item_field::replace_equal_field
erroneously assumed that any field included in a multiple equality
with a constant has been already substituted for this constant.
This not true for fields becoming constant after row substitutions
for constant tables.
When the SUBSTRING() function was used over a LONGTEXT field the max_length of
the SUBSTRING() result was wrongly calculated and set to 0. As the max_length
parameter is used while tmp field creation it limits the length of the result
field and leads to printing an empty string instead of the correct result.
Now the Item_func_substr::fix_length_and_dec() function correctly calculates
the max_length parameter.
mysql-test/t/func_str.test:
Added a test case for the bug#15757: Wrong SUBSTRING() result when a tmp table was employed.
mysql-test/r/func_str.result:
Added a test case for the bug#15757: Wrong SUBSTRING() result when a tmp table was employed.
sql/item_strfunc.cc:
Bug#15757: Wrong SUBSTRING() result when a tmp table was employed.
Now the Item_func_substr::fix_length_and_dec() function correctly calculates
the max_length parameter.
into moonbone.local:/mnt/gentoo64/work/25373-bug-5.0-opt-mysql
mysql-test/r/func_str.result:
Auto merged
mysql-test/r/subselect.result:
Auto merged
mysql-test/r/union.result:
Auto merged
sql/item.cc:
Auto merged
Crash happened because the function get_best_group_min_max detected
joins with ROLLUP incorrectly.
mysql-test/r/olap.result:
Added a test case for bug #26830.
mysql-test/t/olap.test:
Added a test case for bug #26830.
away.
Additional fix for bug#22331. Now Item_field prints its value in the case of
the const field.
mysql-test/r/varbinary.result:
Corrected test case after fix for bug#22331.
mysql-test/r/union.result:
Corrected test case after fix for bug#22331.
mysql-test/r/subselect.result:
Corrected test case after fix for bug#22331.
mysql-test/r/func_test.result:
Corrected test case after fix for bug#22331.
mysql-test/r/having.result:
Corrected test case after fix for bug#22331.
mysql-test/r/func_regexp.result:
Corrected test case after fix for bug#22331.
mysql-test/r/func_str.result:
Corrected test case after fix for bug#22331.
mysql-test/r/func_default.result:
Corrected test case after fix for bug#22331.
mysql-test/r/explain.result:
Corrected test case after fix for bug#22331.
sql/sql_union.cc:
Bug#22331: Wrong WHERE in EXPLAIN EXTENDED when all expressions were optimized
away.
Cleanup of the SELECT_LEX::order_list list.
sql/item.h:
Bug#22331: Wrong WHERE in EXPLAIN EXTENDED when all expressions were optimized
away.
Added the print() member function to the Item_field class.
sql/item.cc:
Bug#22331: Wrong WHERE in EXPLAIN EXTENDED when all expressions were optimized
away.
Added the print() member function to the Item_field class.
When rand() is called multiple times inside a stored procedure, the server does
not binlog the correct random seed values.
This patch corrects the problem by resetting rand_used= 0 in
THD::cleanup_after_query() allowing the system to save the random seeds if needed
for each command in a stored procedure body.
However, rand_used is not reset if executing in a stored function or trigger
because these operations are binlogged by call and thus only the calling statement
need detect the call to rand() made by its substatements. These substatements must
not set rand_used to 0 because it would remove the detection of rand() by the
calling statement.
mysql-test/r/rpl_misc_functions.result:
Bug #25543 Replication of wrong values if using rand() in stored procedure
The result file was modified to include the correct processing of the new
additions to the test. The results from execution are written to files on
both the master and the slave. The files are compared to ensure the values
from rand() generated on the master are correctly generated on the slave.
mysql-test/t/rpl_misc_functions.test:
Bug #25543 Replication of wrong values if using rand() in stored procedure
The test was modified to include a test of a stored procedure that calls
the rand() function multiple times.
The results from execution are written to files on both the master and the
slave. The files are compared to ensure the values from rand() generated
on the master are correctly generated on the slave.
sql/sql_class.cc:
Bug #25543 Replication of wrong values if using rand() in stored procedure
The code was modified to reset rand_used so that detection of calls to rand()
will save random seeds if needed by the slave.
