Sometimes innodb_data_file_size_debug was reported as INT UNSIGNED
instead of BIGINT UNSIGNED. Make it uint instead of ulong to get
a more deterministic result.
InnoDB shutdown failed to properly take fil_crypt_thread() into account.
The encryption threads were signalled to shut down together with other
non-critical tasks. This could be much too early in case of slow shutdown,
which could need minutes to complete the purge. Furthermore, InnoDB
failed to wait for the fil_crypt_thread() to actually exit before
proceeding to the final steps of shutdown, causing the race conditions.
Furthermore, the log_scrub_thread() was shut down way too early.
Also it should remain until the SRV_SHUTDOWN_FLUSH_PHASE.
fil_crypt_threads_end(): Remove. This would cause the threads to
be terminated way too early.
srv_buf_dump_thread_active, srv_dict_stats_thread_active,
lock_sys->timeout_thread_active, log_scrub_thread_active,
srv_monitor_active, srv_error_monitor_active: Remove a race condition
between startup and shutdown, by setting these in the startup thread
that creates threads, not in each created thread. In this way, once the
flag is cleared, it will remain cleared during shutdown.
srv_n_fil_crypt_threads_started, fil_crypt_threads_event: Declare in
global rather than static scope.
log_scrub_event, srv_log_scrub_thread_active, log_scrub_thread():
Declare in static rather than global scope. Let these be created by
log_init() and freed by log_shutdown().
rotate_thread_t::should_shutdown(): Do not shut down before the
SRV_SHUTDOWN_FLUSH_PHASE.
srv_any_background_threads_are_active(): Remove. These checks now
exist in logs_empty_and_mark_files_at_shutdown().
logs_empty_and_mark_files_at_shutdown(): Shut down the threads in
the proper order. Keep fil_crypt_thread() and log_scrub_thread() alive
until SRV_SHUTDOWN_FLUSH_PHASE, and check that they actually terminate.
MariaDB Server 10.0.28 and 10.1.19 merged code from Percona XtraDB
that introduced support for compressed columns. Much but not all
of this code was disabled by placing #ifdef HAVE_PERCONA_COMPRESSED_COLUMNS
around it.
Among the unused but not disabled code is code to access
some new system tables related to compressed columns.
The creation of these system tables SYS_ZIP_DICT and SYS_ZIP_DICT_COLS
would cause a crash in --innodb-read-only mode when upgrading
from an earlier version to 10.0.28 or 10.1.19.
Let us remove all the dead code related to compressed columns.
Users who already upgraded to 10.0.28 and 10.1.19 will have the two
above mentioned empty tables in their InnoDB system tablespace.
Subsequent versions of MariaDB Server will completely ignore those tables.
fil_space_t::recv_size: New member: recovered tablespace size in pages;
0 if no size change was read from the redo log,
or if the size change was implemented.
fil_space_set_recv_size(): New function for setting space->recv_size.
innodb_data_file_size_debug: A debug parameter for setting the system
tablespace size in recovery even when the redo log does not contain
any size changes. It is hard to write a small test case that would
cause the system tablespace to be extended at the critical moment.
recv_parse_log_rec(): Note those tablespaces whose size is being changed
by the redo log, by invoking fil_space_set_recv_size().
innobase_init(): Correct an error message, and do not require a larger
innodb_buffer_pool_size when starting up with a smaller innodb_page_size.
innobase_start_or_create_for_mysql(): Allow startup with any initial
size of the ibdata1 file if the autoextend attribute is set. Require
the minimum size of fixed-size system tablespaces to be 640 pages,
not 10 megabytes. Implement innodb_data_file_size_debug.
open_or_create_data_files(): Round the system tablespace size down
to pages, not to full megabytes, (Our test truncates the system
tablespace to more than 800 pages with innodb_page_size=4k.
InnoDB should not imagine that it was truncated to 768 pages
and then overwrite good pages in the tablespace.)
fil_flush_low(): Refactored from fil_flush().
fil_space_extend_must_retry(): Refactored from
fil_extend_space_to_desired_size().
fil_mutex_enter_and_prepare_for_io(): Extend the tablespace if
fil_space_set_recv_size() was called.
The test case has been successfully run with all the
innodb_page_size values 4k, 8k, 16k, 32k, 64k.
Replace all exit() calls in InnoDB with abort() [possibly via ut_a()].
Calling exit() in a multi-threaded program is problematic also for
the reason that other threads could see corrupted data structures
while some data structures are being cleaned up by atexit() handlers
or similar.
In the long term, all these calls should be replaced with something
that returns an error all the way up the call stack.
Make some global fil_crypt_ variables static.
fil_close(): Call mutex_free(&fil_system->mutex) also in InnoDB, not
only in XtraDB. In InnoDB, sync_close() was called before fil_close().
innobase_shutdown_for_mysql(): Call fil_close() before sync_close(),
similar to XtraDB shutdown.
fil_space_crypt_cleanup(): Call mutex_free() to pair with
fil_space_crypt_init().
fil_crypt_threads_cleanup(): Call mutex_free() to pair with
fil_crypt_threads_init().
The changes are deliberately kept minimal
- some functions are made global instead of static (they will be used in
xtrabackup later on)
- functions got additional parameter, deliberately unused for now :
fil_load_single_tablespaces
srv_undo_tablespaces_init
- Global variables added, also unused for now :
srv_archive_recovery
srv_archive_recovery_limit_lsn
srv_apply_log_only
srv_backup_mode
srv_close_files
- To make xtrabackup link with sql.lib on Windows, added some missing
source files to sql.lib
- Fixed os_thread_ret_t to be DWORD on Windows
Analysis: By design InnoDB was reading first page of every .ibd file
at startup to find out is tablespace encrypted or not. This is
because tablespace could have been encrypted always, not
encrypted newer or encrypted based on configuration and this
information can be find realible only from first page of .ibd file.
Fix: Do not read first page of every .ibd file at startup. Instead
whenever tablespace is first time accedded we will read the first
page to find necessary information about tablespace encryption
status.
TODO: Add support for SYS_TABLEOPTIONS where all table options
encryption information included will be stored.
- Make accelerated checksum available to InnoDB and XtraDB.
- Fall back to slice-by-eight if not available. The mode used is printed on startup.
- Will only build on POWER systems at the moment until CMakeLists are modified
to only add the crc32_power8/ files when building on POWER.
running MySQL-5.7 unittest/gunit/innodb/ut0crc32-t
Before:
1..2
Using software crc32 implementation, CPU is little-endian
ok 1
Using software crc32 implementation, CPU is little-endian
normal CRC32: real 0.148006 sec
normal CRC32: user 0.148000 sec
normal CRC32: sys 0.000000 sec
big endian CRC32: real 0.144293 sec
big endian CRC32: user 0.144000 sec
big endian CRC32: sys 0.000000 sec
ok 2
After:
1..2
Using POWER8 crc32 implementation, CPU is little-endian
ok 1
Using POWER8 crc32 implementation, CPU is little-endian
normal CRC32: real 0.008097 sec
normal CRC32: user 0.008000 sec
normal CRC32: sys 0.000000 sec
big endian CRC32: real 0.147043 sec
big endian CRC32: user 0.144000 sec
big endian CRC32: sys 0.000000 sec
ok 2
Author CRC32 ASM code: Anton Blanchard <anton@au.ibm.com>
ref: https://github.com/antonblanchard/crc32-vpmsum
Signed-off-by: Daniel Black <daniel.black@au.ibm.com>
