wsrep_sst_common did not correctly set name for binlog index
file if custom binlog name was used and this name was
not added to script command line.
Added test case for both log_basename and log_binlog.
Fixed bugs caused by inaccuracies in automatic merging
from other branches:
1) Authentication information is not removed from the connection
address, which causes some tests to fail;
2) wsrep_debug=on should be replaced with wsrep_debug=1;
3) Added missing "connection" lines to test result file;
4) Some tests have been corrected for Galera 4.x (10.4+).
1) This commit implements reading all sections from configuration
files while looking for the current value of any server variable,
which were previously only read from the [mysqld.suffix] group and
from [mysqld], but not from other groups such as [mariadb.suffix],
[mariadb] or, for example, [server].
2) This commit also fixes misrecognition of some parameters when
parsing a command line containing a special marker for the end
of the list of options ("--") or when short option names (such
as "-s", "-a" and "-h arg") chained together (like a "-sah arg").
Such parameters can be passed to the SST script in the list of
arguments after "--mysqld-args" if the server is started with a
complex set of options - this was revealed during manual testing
of changes to read configuration files.
3) The server-side preparation code for the "--mysqld-args"
option list has also been simplified to make it easier to change
in the future (if needed), and has been improved to properly
handle the special backquote ("`") character in the argument
values.
and configuration.
1. Pass joiner's authentication information to donor together with address
in State Transfer Request. This allows joiner to authenticate donor on
connection. Previously joiner would accept data from anywhere.
2. Deprecate custom SSL configuration variables tca, tcert and tkey in favor
of more familiar ssl-ca, ssl-cert and ssl-key. For backward compatibility
tca, tcert and tkey are still supported.
3. Allow falling back to server-wide SSL configuration in [mysqld] if no SSL
configuration is found in [sst] section of the config file.
4. Introduce ssl-mode variable in [sst] section that takes standard values
and has following effects:
- old-style SSL configuration present in [sst]: no effect
otherwise:
- ssl-mode=DISABLED or absent: retains old, backward compatible behavior
and ignores any other SSL configuration
- ssl-mode=VERIFY*: verify joiner's certificate and CN on donor,
verify donor's secret on joiner
(passed to donor via State Transfer Request)
BACKWARD INCOMPATIBLE BEHAVIOR
- anything else enables new SSL configuration convetions but does not
require verification
ssl-mode should be set to VERIFY only in a fully upgraded cluster.
Examples:
[mysqld]
ssl-cert=/path/to/cert
ssl-key=/path/to/key
ssl-ca=/path/to/ca
[sst]
-- server-wide SSL configuration is ignored, SST does not use SSL
[mysqld]
ssl-cert=/path/to/cert
ssl-key=/path/to/key
ssl-ca=/path/to/ca
[sst]
ssl-mode=REQUIRED
-- use server-wide SSL configuration for SST but don't attempt to
verify the peer identity
[sst]
ssl-cert=/path/to/cert
ssl-key=/path/to/key
ssl-ca=/path/to/ca
ssl-mode=VERIFY_CA
-- use SST-specific SSL configuration for SST and require verification
on both sides
Signed-off-by: Julius Goryavsky <julius.goryavsky@mariadb.com>
* Table should have primary key
* Enable wsrep_sync_wait before final selects
* Enable autocommit before final selects.
* Fix joiner monitoring in case of mysqldump.
* Add wait_conditions to stabilize
The test requires adaptation for MariaDB, which is done
in this patch. In addition, this patch includes a fix for
the SST script startup code that adds escaping for special
characters on the command line (in case they are contained
in the arguments to mysqld). The fix does not require
separate tests, as the required tests are already part
of the mtr suite for Galera.
We need to complete SST if both new and old start positions are
not same as initial positions. If they are initial positions
just set local uuid and seqno.
There were multiple problems here
* wsrep_trx_fragment_size should not be set when wsrep is disabled or provider is not loaded
* wsrep_trx_fragment_unit should not be set when wsrep is disabled or provider is not loaded
* wsrep_debug has no effect if wsrep is disabled or provider is not loaded
* wsrep_start_position should not be set when wsrep is disabled or provider is not loaded any other value than default
* wsrep_start_position should be changed only when we are joiner or initialized
* wsrep_start_position should be allowed to set only a value that exits, thus
we need to add error handling to wsrep_sst_complete
This is 10.4 version.
Idea is to create monitor thread for both donor and joiner that will
periodically if needed extend systemd timeout while SST is being
processed. In 10.4 actual SST is executed by running SST script
and exchanging messages on pipe using blocking fgets. This fix
starts monitoring thread before SST script is started and
we stop monitoring thread when SST has been completed.
MariaDB 10.4 was crashing when thread-handling was set to
pool-of-threads and wsrep was enabled.
There were two apparent reasons for the crash:
- Connection handling in threadpool_common.cc was missing calls to
control wsrep client state.
- Thread specific storage which contains thread variables (THR_KEY_mysys)
was not handled appropriately by wsrep patch when pool-of-threads
was configured.
This patch addresses the above issues in the following way:
- Wsrep client state open/close was moved in thd_prepare_connection() and
end_connection() to have common handling for one-thread-per-connection
and pool-of-threads.
- Thread local storage handling in wsrep patch was reworked by introducing
set of wsrep_xxx_threadvars() calls which replace calls to
THD store_globals()/reset_globals() and deal with thread handling
specifics internally.
Wsrep-lib was updated to version which relaxes internal concurrency
related sanity checks.
Rollback code from wsrep_rollback_process() was extracted to separate calls
for better readability.
Post rollback thread was removed as it was completely unused.
After applying MDEV-18863, in some test configurations, SST
may fails due to duplication of some parameters (in particular
"--port") in the main part of the command line and after
"--mysqld-args", as well as due to incorrect interpretation
of the parameter "--port" passed after "--mysqld-args" when
the SST script is invoked without explicitly specifying a port
for SST. In addition, it is necessary to correctly handle spaces,
quotation marks and special characters when copying original
arguments from the argv[] array to a new command line (after
"--mysqld-args"). This patch resolves these shortcomings.
The MDEV-20265 commit e746f451d5
introduces DBUG_ASSERT(right_op == r_tbl) in
st_select_lex::add_cross_joined_table(), and that assertion would
fail in several tests that exercise joins. That commit was skipped
in this merge, and a separate fix of MDEV-20265 will be necessary in 10.4.
Problem was that wsrep thread argument was deleted on wrong
place. Furthermore, scan method incorrectly used unsafe c_ptr().
Finally, fixed wsrep thread initialization to correctly set
up thread_id and pass correct argument to functions and
fix signess problem causing compiler errors.
For MDEV-15955, the fix in create_tmp_field_from_item() would cause a
compilation error. After a discussion with Alexander Barkov, the fix
was omitted and only the test case was kept.
In 10.3 and later, MDEV-15955 is fixed properly by overriding
create_tmp_field() in Item_func_user_var.
Some users and some scripts (for example, mysqld_multi.sh) use special
option groups with names like [mysqld1], [mysqld2], ..., [mysqldN].
But SST scripts can't currently fully support these option groups.
The only option group-related value it gets from the server is
--defaults-group-suffix, if that option was set for mysqld when
the server was started.
However, the SST scripts does not get told by the server to read
these option groups, so this means that the SST script will fail
to read options like innodb-data-home-dir when it is in a option
group like [mysqld1]...[mysqldN].
Moreover, SST scripts ignore many parameters that can be passed
to them explicitly and cannot transfer them further, for example,
to the input of mariabackup utility. Ideally, we want to transfer
all the parameters of the original mysqld call to utilities such
as mariabackup, however the SST script does not receive these
parameters from the server and therefore cannot transfer them to
mariabackup.
To correct these shortcomings, we need to transfer to the scripts
all of the parameters of the original mysqld call, and in the SST
scripts themselves provide for the transfer all of these parameters
to utilities such as mariabackup. To prevent these parameters from
mixing with the script's own parameters, they should be transferred
to SST script after the special option "--mysqld-args", followed by
the string argument with the original parameters, as it received by
the mysqld call at the time of launch (further all these parameters
will be passed to mariabackup, for example).
In addition, the SST scripts themselves must be refined so that
they can read the parameters from the user-selected group, not just
from the global mysqld configuration group. And also so that they
can receive the parameters (which important for their work) as
command-line arguments.
Some users and some scripts (for example, mysqld_multi.sh) use special
option groups with names like [mysqld1], [mysqld2], ..., [mysqldN].
But SST scripts can't currently fully support these option groups.
The only option group-related value it gets from the server is
--defaults-group-suffix, if that option was set for mysqld when
the server was started.
However, the SST scripts does not get told by the server to read
these option groups, so this means that the SST script will fail
to read options like innodb-data-home-dir when it is in a option
group like [mysqld1]...[mysqldN].
Moreover, SST scripts ignore many parameters that can be passed
to them explicitly and cannot transfer them further, for example,
to the input of mariabackup utility. Ideally, we want to transfer
all the parameters of the original mysqld call to utilities such
as mariabackup, however the SST script does not receive these
parameters from the server and therefore cannot transfer them to
mariabackup.
To correct these shortcomings, we need to transfer to the scripts
all of the parameters of the original mysqld call, and in the SST
scripts themselves provide for the transfer all of these parameters
to utilities such as mariabackup. To prevent these parameters from
mixing with the script's own parameters, they should be transferred
to SST script after the special option "--mysqld-args", followed by
the string argument with the original parameters, as it received by
the mysqld call at the time of launch (further all these parameters
will be passed to mariabackup, for example).
In addition, the SST scripts themselves must be refined so that
they can read the parameters from the user-selected group, not just
from the global mysqld configuration group. And also so that they
can receive the parameters (which important for their work) as
command-line arguments.
Some users and some scripts (for example, mysqld_multi.sh) use special
option groups with names like [mysqld1], [mysqld2], ..., [mysqldN].
But SST scripts can't currently fully support these option groups.
The only option group-related value it gets from the server is
--defaults-group-suffix, if that option was set for mysqld when
the server was started.
However, the SST scripts does not get told by the server to read
these option groups, so this means that the SST script will fail
to read options like innodb-data-home-dir when it is in a option
group like [mysqld1]...[mysqldN].
Moreover, SST scripts ignore many parameters that can be passed
to them explicitly and cannot transfer them further, for example,
to the input of mariabackup utility. Ideally, we want to transfer
all the parameters of the original mysqld call to utilities such
as mariabackup, however the SST script does not receive these
parameters from the server and therefore cannot transfer them to
mariabackup.
To correct these shortcomings, we need to transfer to the scripts
all of the parameters of the original mysqld call, and in the SST
scripts themselves provide for the transfer all of these parameters
to utilities such as mariabackup. To prevent these parameters from
mixing with the script's own parameters, they should be transferred
to SST script after the special option "--mysqld-args", followed by
the string argument with the original parameters, as it received by
the mysqld call at the time of launch (further all these parameters
will be passed to mariabackup, for example).
In addition, the SST scripts themselves must be refined so that
they can read the parameters from the user-selected group, not just
from the global mysqld configuration group. And also so that they
can receive the parameters (which important for their work) as
command-line arguments.
Some users and some scripts (for example, mysqld_multi.sh) use special
option groups with names like [mysqld1], [mysqld2], ..., [mysqldN].
But SST scripts can't currently fully support these option groups.
The only option group-related value it gets from the server is
--defaults-group-suffix, if that option was set for mysqld when
the server was started.
However, the SST scripts does not get told by the server to read
these option groups, so this means that the SST script will fail
to read options like innodb-data-home-dir when it is in a option
group like [mysqld1]...[mysqldN].
Moreover, SST scripts ignore many parameters that can be passed
to them explicitly and cannot transfer them further, for example,
to the input of mariabackup utility. Ideally, we want to transfer
all the parameters of the original mysqld call to utilities such
as mariabackup, however the SST script does not receive these
parameters from the server and therefore cannot transfer them to
mariabackup.
To correct these shortcomings, we need to transfer to the scripts
all of the parameters of the original mysqld call, and in the SST
scripts themselves provide for the transfer all of these parameters
to utilities such as mariabackup. To prevent these parameters from
mixing with the script's own parameters, they should be transferred
to SST script after the special option "--mysqld-args", followed by
the string argument with the original parameters, as it received by
the mysqld call at the time of launch (further all these parameters
will be passed to mariabackup, for example).
In addition, the SST scripts themselves must be refined so that
they can read the parameters from the user-selected group, not just
from the global mysqld configuration group. And also so that they
can receive the parameters (which important for their work) as
command-line arguments.
Galera threads were not registered to performance schema and
used pthread_create when mysql_thread_create should have been
used.
Added test case to verify current galera performance schema
instrumentation does work.
