The following scenario crashes our mysql server:
1. set global innodb_file_per_table=1;
2. create table t1(c1 int) engine=innodb;
3. alter table t1 discard tablespace;
4. alter table t1 add unique index(c1);
Step 4 crashes the server. This patch introduces a check on discarded
tablespace to avoid the crash.
rb://1041 approved by Marko Makela
FULLTEXT INDEX AND CONCURRENT DML.
Problem Statement:
------------------
1) Create a table with FT index.
2) Enable concurrent inserts.
3) In multiple threads do below operations repeatedly
a) truncate table
b) insert into table ....
c) select ... match .. against .. non-boolean/boolean mode
After some time we could observe two different assert core dumps
Analysis:
--------
1)assert core dump at key_read_cache():
Two select threads operating in-parallel on same key
root block.
1st select thread block->status is set to BLOCK_ERROR
because the my_pread() in read_block() is returning '0'.
Truncate table made the index file size as 1024 and pread
was asked to get the block of count bytes(1024 bytes)
from offset of 1024 which it cannot read since its
"end of file" and retuning '0' setting
"my_errno= HA_ERR_FILE_TOO_SHORT" and the key_file_length,
key_root[0] is same i.e. 1024. Since block status has BLOCK_ERROR
the 1st select thread enter into the free_block() and will
be under wait on conditional mutex by making status as
BLOCK_REASSIGNED and goes for wait_on_readers(). Other select
thread will also work on the same block and sees the status as
BLOCK_ERROR and enters into free_block(), checks for BLOCK_REASSIGNED
and asserting the server.
2)assert core dump at key_write_cache():
One select thread and One insert thread.
Select thread gets the unlocks the 'keycache->cache_lock',
which allows other threads to continue and gets the pread()
return value as'0'(please see the explanation above) and
tries to get the lock on 'keycache->cache_lock' and waits
there for the lock.
Insert thread requests for the block, block will be assigned
from the hash list and makes the page_status as
'PAGE_WAIT_TO_BE_READ' and goes for the read_block(), waits
in the queue since there are some other threads performing
reads on the same block.
Select thread which was waiting for the 'keycache->cache_lock'
mutex in the read_block() will continue after getting the my_pread()
value as '0' and sets the block status as BLOCK_ERROR and goes to
the free_block() and go to the wait_for_readers().
Now the insert thread will awake and continues. and checks
block->status as not BLOCK_READ and it asserts.
Fix:
---
In the full text code, multiple readers of index file is not guarded.
Hence added below below code in _ft2_search() and walk_and_match().
to lock the key_root I have used below code in _ft2_search()
if (info->s->concurrent_insert)
mysql_rwlock_rdlock(&share->key_root_lock[0]);
and to unlock
if (info->s->concurrent_insert)
mysql_rwlock_unlock(&share->key_root_lock[0]);
storage/myisam/ft_boolean_search.c:
Since its a recursion function, to avoid confusion in taking and
releasing the locks, renamed _ft2_search() to _ft2_search_internal()
function. And _ft2_search() will take the lock, call
_ft2_search_internal() and release the lock in case of concurrent
inserts.
storage/myisam/ft_nlq_search.c:
Added read locks code in walk_and_match()
INNODB_AUTOINC_LOCK_MODE=1 AND USING TRIGGER
When an insert stmt like "insert into t values (1),(2),(3)" is
executed, the autoincrement values assigned to these three rows are
expected to be contiguous. In the given lock mode
(innodb_autoinc_lock_mode=1), the auto inc lock will be released
before the end of the statement. So to make the autoincrement
contiguous for a given statement, we need to reserve the auto inc
values at the beginning of the statement.
rb://1074 approved by Alexander Nozdrin
dict_table_replace_index_in_foreign_list(): Replace the dropped index
also in the foreign key constraints of child tables that are
referencing this table.
row_ins_check_foreign_constraint(): If the underlying index is
missing, refuse the operation.
rb:1051 approved by Jimmy Yang
There can be cases when the optimizer calls ha_partition::records_in_range
when there are no matching partitions. So the DBUG_ASSERT of
!tot_used_partitions does assert.
Fixed by returning 0 instead when no matching partitions are found.
This will avoid the crash. records_in_range will then try to find the
biggest used partition, which will not find any partition and
records_in_range will then return 0, meaning non rows can be found.
Patch contributed by Davi Arnaut at twitter.
Issue/Cause:
Issue is of memory corruption.During optimization phase, pattern to be matched in where
clause, is prepared. This is done in Item_func_concat::val_str() function which forms the
resultant string (tmp_value) and return its pointer. In caller, Item_func_like::fix_fields,
pattern is made to point to this string (tmp_value). In further processing, tmp_value is
getting modified which causes pattern to have changed/wrong values.
Fix:
Allocate its own memroy location in caller, copy value of resultant string (tmp_value)
into that and make pattern to point to that. This makes sure no further changes to
tmp_value will affect pattern.
The following scenario crashes our mysql server:
1. set global innodb_file_per_table=1;
2. create table t1(c1 int) engine=innodb;
3. alter table t1 discard tablespace;
4. alter table t1 add unique index(c1);
Step 4 crashes the server. This patch introduces a check on discarded
tablespace to avoid the crash.
rb://1041 approved by Marko Makela
FULLTEXT INDEX AND CONCURRENT DML.
Problem Statement:
------------------
1) Create a table with FT index.
2) Enable concurrent inserts.
3) In multiple threads do below operations repeatedly
a) truncate table
b) insert into table ....
c) select ... match .. against .. non-boolean/boolean mode
After some time we could observe two different assert core dumps
Analysis:
--------
1)assert core dump at key_read_cache():
Two select threads operating in-parallel on same key
root block.
1st select thread block->status is set to BLOCK_ERROR
because the my_pread() in read_block() is returning '0'.
Truncate table made the index file size as 1024 and pread
was asked to get the block of count bytes(1024 bytes)
from offset of 1024 which it cannot read since its
"end of file" and retuning '0' setting
"my_errno= HA_ERR_FILE_TOO_SHORT" and the key_file_length,
key_root[0] is same i.e. 1024. Since block status has BLOCK_ERROR
the 1st select thread enter into the free_block() and will
be under wait on conditional mutex by making status as
BLOCK_REASSIGNED and goes for wait_on_readers(). Other select
thread will also work on the same block and sees the status as
BLOCK_ERROR and enters into free_block(), checks for BLOCK_REASSIGNED
and asserting the server.
2)assert core dump at key_write_cache():
One select thread and One insert thread.
Select thread gets the unlocks the 'keycache->cache_lock',
which allows other threads to continue and gets the pread()
return value as'0'(please see the explanation above) and
tries to get the lock on 'keycache->cache_lock' and waits
there for the lock.
Insert thread requests for the block, block will be assigned
from the hash list and makes the page_status as
'PAGE_WAIT_TO_BE_READ' and goes for the read_block(), waits
in the queue since there are some other threads performing
reads on the same block.
Select thread which was waiting for the 'keycache->cache_lock'
mutex in the read_block() will continue after getting the my_pread()
value as '0' and sets the block status as BLOCK_ERROR and goes to
the free_block() and go to the wait_for_readers().
Now the insert thread will awake and continues. and checks
block->status as not BLOCK_READ and it asserts.
Fix:
---
In the full text code, multiple readers of index file is not guarded.
Hence added below below code in _ft2_search() and walk_and_match().
to lock the key_root I have used below code in _ft2_search()
if (info->s->concurrent_insert)
mysql_rwlock_rdlock(&share->key_root_lock[0]);
and to unlock
if (info->s->concurrent_insert)
mysql_rwlock_unlock(&share->key_root_lock[0]);
storage/myisam/ft_boolean_search.c:
Since its a recursion function, to avoid confusion in taking and
releasing the locks, renamed _ft2_search() to _ft2_search_internal()
function. And _ft2_search() will take the lock, call
_ft2_search_internal() and release the lock in case of concurrent
inserts.
storage/myisam/ft_nlq_search.c:
Added read locks code in walk_and_match()
RESULTS ON IN() & NOT IN() COMP #3
This bug causes a wrong result in mysql-trunk when ICP is used
and bad performance in mysql-5.5 and mysql-trunk.
Using the query from bug report to explain what happens and causes
the wrong result from the query when ICP is enabled:
1. The t3 table contains four records. The outer query will read
these and for each of these it will execute the subquery.
2. Before the first execution of the subquery it will be optimized. In
this case the important is what happens to the first table t1:
-make_join_select() will call the range optimizer which decides
that t1 should be accessed using a range scan on the k1 index
It creates a QUICK_RANGE_SELECT object for this.
-As the last part of optimization the ICP code pushes the
condition down to the storage engine for table t1 on the k1 index.
This produces the following information in the explain for this table:
2 DEPENDENT SUBQUERY t1 range k1 k1 5 NULL 3 Using index condition; Using filesort
Note the use of filesort.
3. The first execution of the subquery does (among other things) due
to the need for sorting:
a. Call create_sort_index() which again will call find_all_keys():
b. find_all_keys() will read the required keys for all qualifying
rows from the storage engine. To do this it checks if it has a
quick-select for the table. It will use the quick-select for
reading records. In this case it will read four records from the
storage engine (based on the range criteria). The storage engine
will evaluate the pushed index condition for each record.
c. At the end of create_sort_index() there is code that cleans up a
lot of stuff on the join tab. One of the things that is cleaned
is the select object. The result of this is that the
quick-select object created in make_join_select is deleted.
4. The second execution of the subquery does the same as the first but
the result is different:
a. Call create_sort_index() which again will call find_all_keys()
(same as for the first execution)
b. find_all_keys() will read the keys from the storage engine. To
do this it checks if it has a quick-select for the table. Now
there is NO quick-select object(!) (since it was deleted in
step 3c). So find_all_keys defaults to read the table using a
table scan instead. So instead of reading the four relevant records
in the range it reads the entire table (6 records). It then
evaluates the table's condition (and here it goes wrong). Since
the entire condition has been pushed down to the storage engine
using ICP all 6 records qualify. (Note that the storage engine
will not evaluate the pushed index condition in this case since
it was pushed for the k1 index and now we do a table scan
without any index being used).
The result is that here we return six qualifying key values
instead of four due to not evaluating the table's condition.
c. As above.
5. The two last execution of the subquery will also produce wrong results
for the same reason.
Summary: The problem occurs due to all but the first executions of the
subquery is done as a table scan without evaluating the table's
condition (which is pushed to the storage engine on a different
index). This is caused by the create_sort_index() function deleting
the quick-select object that should have been used for executing the
subquery as a range scan.
Note that this bug in addition to causing wrong results also can
result in bad performance due to executing the subquery using a table
scan instead of a range scan. This is an issue in MySQL 5.5.
The fix for this problem is to avoid that the Quick-select-object that
the optimizer created is deleted when create_sort_index() is doing
clean-up of the join-tab. This will ensure that the quick-select
object and the corresponding pushed index condition will be available
and used by all following executions of the subquery.
sql/sql_select.cc:
Fix for Bug#12667154: Change how create_sort_index() cleans up the
join_tab's select and quick-select objects in order to avoid that a
quick-select object created outside of create_sort_index() is deleted.
If we did nothing in resolving unique table conflict we should not retry (it leed to infinite loop).
Now we retry (recheck) unique table check only in case if we materialized a table.
- Let fix_semijoin_strategies_for_picked_join_order() set
POSITION::prefix_record_count for POSITION records that it copies from
SJ_MATERIALIZATION_INFO::tables.
(These records do not have prefix_record_count set, because they are optimized
as joins-inside-semijoin-nests, without full advance_sj_state() processing).
Fixed some mtr test problems
dbug/tests.c:
Fixed compiler warnings
mysql-test/r/handlersocket.result:
Fixed that plugin_license is written
mysql-test/suite/innodb/t/innodb_bug60196.test:
Force sorted results as it was sometimes different on windows
mysql-test/suite/rpl/t/rpl_heartbeat_basic.test:
Prolong test as this failed on windows
mysql-test/t/handlersocket.test:
Fixed that plugin_license is written
plugin/handler_socket/handlersocket/handlersocket.cpp:
Use maria_declare_plugin
plugin/handler_socket/handlersocket/mysql_incl.hpp:
Fixed compiler warning
plugin/handler_socket/libhsclient/auto_addrinfo.hpp:
Fixed compiler warning
sql/handler.h:
Fixed typo
sql/sql_plugin.cc:
Fixed bug that caused plugin library name twice in error message
storage/maria/ma_checkpoint.c:
Fixed compiler warning
storage/maria/ma_loghandler.c:
Fixed compiler warning
unittest/mysys/base64-t.c:
Fixed compiler warning
unittest/mysys/bitmap-t.c:
Fixed compiler warning
unittest/mysys/my_malloc-t.c:
Fixed compiler warning
Fix is done by doing an autocommit in truncate table inside Aria
storage/maria/ha_maria.cc:
Force a commit for TRUNCATE TABLE inside lock tables
Check that we don't call TRUNCATE with concurrent inserts going on.
Make ha_maria::implict_commit faster when we don't have Aria tables in the transaction.
(Most of the patch is just re-indentation because I removed an if level)
The optimizer chose a less efficient execution plan due to the following
defects of the code:
1. the generic handler function handler::keyread_time did not take into account
that in clustered primary keys record data is included into each index entry
2. the function make_join_readinfo erroneously decided that index only scan
could not be used if join cache was empoyed.
Added no additional test case.
Adjusted some of the test results.
Changed HA_EXTRA_NORMAL to HA_EXTRA_NOT_USED (more clean)
mysql-test/suite/maria/lock.result:
More extensive tests of LOCK TABLE with FLUSH and REPAIR
mysql-test/suite/maria/lock.test:
More extensive tests of LOCK TABLE with FLUSH and REPAIR
sql/sql_admin.cc:
Fix that REPAIR TABLE ... USE_FRM works with LOCK TABLES
sql/sql_base.cc:
Ensure that transactions are closed in ARIA when doing flush
HA_EXTRA_NORMAL -> HA_EXTRA_NOT_USED
Don't call extra many times for a table in close_all_tables_for_name()
Added test if table_list->table as this can happen in error situations
sql/sql_partition.cc:
HA_EXTRA_NORMAL -> HA_EXTRA_NOT_USED
sql/sql_reload.cc:
Fixed comment
sql/sql_table.cc:
HA_EXTRA_NORMAL -> HA_EXTRA_NOT_USED
sql/sql_trigger.cc:
HA_EXTRA_NORMAL -> HA_EXTRA_NOT_USED
sql/sql_truncate.cc:
HA_EXTRA_FORCE_REOPEN -> HA_EXTRA_PREPARE_FOR_DROP for truncate, as this speeds up truncate by not having to flush the cache to disk.
