1. Revert incorrect treatment of m_needs_reopen;
2. Close single instance of TABLE instead of all instances since
reopened only those that are marked for reopen.
1. Fix DBUG_ASSERT(!table->pos_in_locked_tables) in tc_release_table();
2. Fix access of prematurely freed MDL_ticket: don't close ticket if table was not closed;
3. Fix deadlock after erroneous ALTER.
mysql_alter_table() leaves dirty table->m_needs_reopen in case of
error exit which then incorrectly treated by mysql_lock_tables().
For MODE_SIMULTANEOUS_ASSIGNMENT it is required to return back field
offsets from record[1] to record[0]. 'continue' in warning branch did
skip of rfield->move_field_offset() call.
MDEV-17717
Assertion `!table->pos_in_locked_tables' failed in tc_release_table on
flushing RocksDB table under SERIALIZABLE
MDEV-17998
Deadlock and eventual Assertion `!table->pos_in_locked_tables' failed
in tc_release_table on KILL_TIMEOUT
MDEV-19591
Assertion `!table->pos_in_locked_tables' failed in tc_release_table upon
altering table into S3 under lock.
The problem was that thd->open_tables->pos_in_locked_tables was not reset
when alter table failed to reopen a locked table.
MDEV-5589 commit set up a policy to skip DROP TEMPORARY TABLE binary logging
in case the target table has not been "CREATEed" in binlog (no CREATE
Query-log-event was logged into the binary log).
It turns out that
1. the rule did not cover non-existing table DROPped with IF-EXISTS clause.
The logged-create knowledge for the non-existing one does not even need
MDEV-5589 patch, and
2. connection close disobeys it to trigger automatic DROP-IF-EXISTS
binlogging.
Either 1 or 2 or even both is/are also responsible for unexpected binlog
records observed in MDEV-17863, actually rendering a referred
@@global.read_only irrelevant as far as the described stored procedure
definition *and* the ROW binlog-format are concerned.
The problem was two fault:
- flush_tables() wrongly gave errors when failing to open read only tables
- backup_block_ddl() didn't properly ignores errors from flush_tables()
The test case for this will be pushed in 10.5 as the test involves
S3 tables.
cmake -DCMAKE_C_COMPILER=clang -DCMAKE_CXX_COMPILER=clang++ -DCMAKE_BUILD_TYPE=Debug
Maintainer mode makes all warnings errors. This patch fix warnings. Mostly about
deprecated `register` keyword.
Too much warnings came from Mroonga and I gave up on it.
as well as
MDEV-19500 Update with join stopped worked if there is a call to a procedure in a trigger
MDEV-19521 Update Table Fails with Trigger and Stored Function
MDEV-19497 Replication stops because table not found
MDEV-19527 UPDATE + JOIN + TRIGGERS = table doesn't exists error
Reimplement the fix for (5d510fdbf0)
MDEV-18507 can't update temporary table when joined with table with triggers on read-only
instead of calling open_tables() twice, put multi-update
prepare code inside open_tables() loop.
Add a test for a MDL backoff-and-retry loop inside open_tables()
across multi-update prepare code.
The bug was that when using mysql_list_fields, then
table_list->schema_table_name was not filled in.
Fixed by using table_list->schema_table instead, which is always
filled in.
Problem:
========
We have a Master/Master Setup on two servers, but are only writing to one of
those servers (so it is essentially Master/Slave) We upgraded from 10.1.* to
10.2.22 last week and starting with the upgrade, we are getting duplicate key
errors on the slave. BINLOG=mixed.
Analysis:
=========
This issue happens with LOCK TABLES and binlog_format=MIXED combination. When an
UNSAFE statement is encountered in 'MIXED' mode, it is logged in the form of
'ROW' format. For all the tables that are part of LOCK TABLES list their table maps
are written into the binary log. For each table in the list a check is
done to see if 'check_table_binlog_row_based_done' flag is set or not. If it is not set
a check process is initiated to see if table qualifies for row based binary
logging or not and 'check_table_binlog_row_based_done' is set. This flag will be
cleared at the time of closing thread tables.
But there can be special cases where the LOCK TABLES contains more number of
tables but the unsafe query is actually using subset of tables from LOCK TABLES
list.
For example: LOCK TABLES locks t1,t2,t3 but the unsafe statement makes use of
only two tables t1,t3. In this case the 'check_table_binlog_row_based_done' flag
is enabled for table 't2' while writing table map, but 'close_thread_tables'
function call will not reset this flag. Since the flag is not cleared for table
't2' even a safe statement which used t2 will be logged in the form of row based
format.
This leads to an assert on debug builds and causes duplicate entries in release
builds. In release builds a statement is logged in the form of both ROW and
STATEMENT format. This causes the slave to fail with duplicate key error.
Fix:
===
During 'close_thread_tables' when LOCK TABLE modes are active "ha_reset" is done
for all the tables which were part of current statement. As mentioned in the
example 'ha_reset' is called for tables 't1' and 't3'. This will clear the
'check_table_binlog_row_based_done' flag. At this point add a check for the rest
of the tables to see if 'check_table_binlog_row_based_done' is enabled or not.
If enabled clear the flag.
Let xid_cache_insert()/xid_cache_delete() handle xa_state.
Let session tracker use is_explicit_XA() rather than xa_state != XA_NOTR.
Fixed open_tables() to refuse data access in XA_ROLLBACK_ONLY state.
Removed dead code from THD::cleanup(). It was supposed to be a reminder,
but it got messed up over time.
spider_internal_start_trx() is called either with XA_NOTR or XA_ACTIVE,
which is guarded by server callers. Thus is_explicit_XA() is acceptable
replacement for XA_ACTIVE check (which was likely wrong anyway).
Setting xa_state to XA_PREPARED in spider_internal_xa_prepare() isn't
meaningful, as this value is never accessed later. It can't be accessed
by current thread and it can't be recovered either. It can only be
accessed by spider internally, which never happens.
Make spider_xa_lock()/spider_xa_unlock() static.
Part of MDEV-7974 - backport fix for mysql bug#12161 (XA and binlog)
triggers are opened and tables used in triggers are prelocked in
open_tables(). But multi-update can detect what tables will actually
be updated only later, after all main tables are opened.
Meaning, if a table is used in multi-update, but is not actually updated,
its on-update treggers will be opened and tables will be prelocked,
even if it's unnecessary. This can cause more tables to be
write-locked than needed, causing read_only errors, privilege errors
and lock waits.
Fix: don't open/prelock triggers unless table->updating is true.
In multi-update after setting table->updating=true, do a second
open_tables() for newly added tables, if any.
With INFORMATION_SCHEMA set as the default database the check that a table
referred in the processed query is defined in INORMATION_SCHEMA must
be postponed until all CTE names can be identified.
* update system versioning fields before generaled columns
* don't presume that ha_write_row() means INSERT. It could still be UPDATE
* use the correct handler in check_duplicate_long_entry_key()
close table->update_handler in close_thread_tables().
it's not enough to do it in sql_update.cc only, because
sql_insert.cc can also do updates (REPLACE) and even
sql_delete.cc can (DELETE ... FOR PORTION OF)
move all backward compatibility related code into User_table,
the caller should not know or care anymore.
Other tables (Db_table, etc) are *not* refactored.
For consistency with other updates, setting a default role
no longer errors out when the mysql.user table is too old.
After MDEV-17772 table existence check is performed much earlier, so
create_table_select_before_check_if_exists debug sync point is not
reachable when table exists.
Moved debug sync point to appropriate place.
MDEV-17772 - 3 way lock : ALTER, MDL, BACKUP STAGE BLOCK_DDL
While waiting for a (potentially long) RO transaction or SELECT, DDL and
LOCK TABLES ... WRITE hold protection against FTWRL and BACKUP STAGE.
This effectively makes FTWRL/BACKUP STAGE indirectly wait for this RO
transaction or SELECT to finish. Which is not great, as otherwise we
could do something useful meanwhile.
With this patch BACKUP lock is attempted to be acquired after TABLE/SCHEMA
locks. If this attempt fails, TABLE/SCHEMA locks gets released and we
start waiting for BACKUP lock. When wait finishes, BACKUP lock is released
(to avoid deadlocks) and we attempt to acquire all locks once again.
Other changes:
- Take MDL lock before testing if table exists as part of
CREATE TABLE ... IF EXISTS. This change was an effect of changes in
lock_table_name and removes an inconsistency where one could get
different error messages from CREATE TABLE .. IF EXISTS depending on
active mdl locks.
One effect of this change is that we don't binary log CREATE TABLE IF
EXISTS if the table exists. This was done because old code was sometimes
behaving inconsistenly (it was logged some time and not other times)
and sending the query to the slave could make the slave even more
inconsistent as there is not guarantee that the new table will have
the same definition as the old table on the master.
