Third updated patch - this version also includes copyright notice in added Perl script.
This patch implements a check for such modules at runtime. If modules are not found or unable to load, the test is skipped with
the following message:
[ skipped ] Test needs Perl modules DBI and DBD::mysql
Checks are done via a helper Perl script which looks for the module in a runtime environment that is as similar to that of the
mysqlhotcopy script as possible (thus not intended for Windows environments at this time).
The helper script tells mysql-test about the result by writing information to a temporary file that is later read by mysql-test.
See comments in added files (have_dbi_dbd-mysql.inc and checkDBI_DBD-mysql.pl) for details.
The patch also removes the mysqlhotcopy tests from the list of disabled tests.
The test result differs on windows, since
it writes out 'localhost:<port>' instead of
only 'localhost', since it uses tcp/ip instead
of unix sockets on windows.
Fixed by replacing that column.
Also requires --big-test from some long running tests
and added a weekly run of all test requiring --big-test.
- A prerequisite cleanup patch for making KILL reliable.
The test case main.kill did not work reliably.
The following problems have been identified:
1. A kill signal could go lost if it came in, short before a
thread went reading on the client connection.
2. A kill signal could go lost if it came in, short before a
thread went waiting on a condition variable.
These problems have been solved as follows. Please see also
added code comments for more details.
1. There is no safe way to detect, when a thread enters the
blocking state of a read(2) or recv(2) system call, where it
can be interrupted by a signal. Hence it is not possible to
wait for the right moment to send a kill signal. It has been
decided, not to fix it in the code. Instead, the test case
repeats the KILL statement until the connection terminates.
2. Before waiting on a condition variable, we register it
together with a synchronizating mutex in THD::mysys_var. After
this, we need to test THD::killed again. At some places we did
only test it in a loop condition before the registration. When
THD::killed had been set between this test and the registration,
we entered waiting without noticing the killed flag. Additional
checks ahve been introduced where required.
In addition to the above, a re-write of the main.kill test
case has been done. All sleeps have been replaced by Debug
Sync Facility synchronization. A couple of sync points have
been added to the server code.
To avoid further problems, if the test case fails in spite of
the fixes, the test case has been added to the "experimental"
list for now.
- Most of the work on this patch is authored by Ingo Struewing
On Solaris with version 3.4.6, the ha_example.so shared library is built
with DTrace and the server is built without DTrace support. This occurs
because dtrace.cmake disables DTrace support for 3.4.6, but still set
HAVE_DTRACE, which causes probes_mysql.h to include probes_mysql_dtrace.h
instead of probes_mysql_nodtrace.h.
This patch fixes this by not setting HAVE_DTRACE on Solaris for GCC 3.4.6.
files for cmake had some minor bugs causing this.
per-file comments:
mysql-test/CMakeLists.txt
Bug#54129 Missing the execute bit for scripts
use same permissions as in the source folder
mysql-test/t/disabled.def
Bug#54129 Missing the execute bit for scripts
mysqlhotcopy tests enabled
scripts/CMakeLists.txt
Bug#54129 Missing the execute bit for scripts
chmod +x for the script files
Remove acquisition of LOCK_open around file system operations,
since such operations are now protected by metadata locks.
Rework table discovery algorithm to not require LOCK_open.
No new tests added since all MDL locking operations are covered
in lock.test and mdl_sync.test, and as long as these tests
pass despite the increased concurrency, consistency must be
unaffected.
Fix Bug#50555 "handler commands crash server in my_hash_first()"
as a post-merge fix (the new handler tests are not passing
otherwise).
- in hash.c, don't call calc_hash if ! my_hash_inited().
- add tests and results for the test case for Bug#50555
----------------------------------------------------------
revno: 2630.4.38
committer: Konstantin Osipov <konstantin@mysql.com>
branch nick: mysql-6.0-4144
timestamp: Wed 2008-06-25 22:07:06 +0400
message:
WL#4144 - Lock MERGE engine children.
Committing a version of the patch merged with WL#3726
on behalf of Ingo.
Step #1: Move locking from parent to children.
MERGE children are now left in the query list of tables
after inserted there in open_tables(). So they are locked
by lock_tables() as all other tables are.
The MERGE parent does not store locks any more. It appears
in a MYSQL_LOCK with zero lock data. This is kind of a "dummy"
lock.
All other lock handling is also done directly on the children.
To protect against parent or child modifications during LOCK
TABLES, the children are detached after every statement and
attached before every statement, even under LOCK TABLES.
The children table list is removed from the query list of tables
on every detach and on close of the parent.
Step #2: Move MERGE specific functionality from SQL layer
into table handler.
Functionality moved from SQL layer (mainly sql_base.cc)
to the table handler (ha_myisammrg.cc).
Unnecessary code is removed from the SQL layer.
Step #3: Moved all MERGE specific members from TABLE
to ha_myisammrg.
Moved members from TABLE to ha_myisammrg.
Renamed some mebers.
Fixed comments.
Step #4: Valgrind and coverage testing
Valgrind did not uncover new problems.
Added purecov comments.
Added a new test for DATA/INDEX DIRECTORY options.
Changed handling of ::reset() for non-attached children.
Fixed the merge-big test.
Step #5: Fixed crashes detected during review
Changed detection when to attach/detach.
Added new tests.
Backport also the fix for Bug#44040 "MySQL allows creating a
MERGE table upon VIEWs but crashes when using it"
Backport of:
------------------------------------------------------------
revno: 2630.4.1
committer: Dmitry Lenev <dlenev@mysql.com>
branch nick: mysql-6.0-3726-w
timestamp: Fri 2008-05-23 17:54:03 +0400
message:
WL#3726 "DDL locking for all metadata objects".
After review fixes in progress.
------------------------------------------------------------
This is the first patch in series. It transforms the metadata
locking subsystem to use a dedicated module (mdl.h,cc). No
significant changes in the locking protocol.
The import passes the test suite with the exception of
deprecated/removed 6.0 features, and MERGE tables. The latter
are subject to a fix by WL#4144.
Unfortunately, the original changeset comments got lost in a merge,
thus this import has its own (largely insufficient) comments.
This patch fixes Bug#25144 "replication / binlog with view breaks".
Warning: this patch introduces an incompatible change:
Under LOCK TABLES, it's no longer possible to FLUSH a table that
was not locked for WRITE.
Under LOCK TABLES, it's no longer possible to DROP a table or
VIEW that was not locked for WRITE.
******
Backport of:
------------------------------------------------------------
revno: 2630.4.2
committer: Dmitry Lenev <dlenev@mysql.com>
branch nick: mysql-6.0-3726-w
timestamp: Sat 2008-05-24 14:03:45 +0400
message:
WL#3726 "DDL locking for all metadata objects".
After review fixes in progress.
******
Backport of:
------------------------------------------------------------
revno: 2630.4.3
committer: Dmitry Lenev <dlenev@mysql.com>
branch nick: mysql-6.0-3726-w
timestamp: Sat 2008-05-24 14:08:51 +0400
message:
WL#3726 "DDL locking for all metadata objects"
Fixed failing Windows builds by adding mdl.cc to the lists
of files needed to build server/libmysqld on Windows.
******
Backport of:
------------------------------------------------------------
revno: 2630.4.4
committer: Dmitry Lenev <dlenev@mysql.com>
branch nick: mysql-6.0-3726-w
timestamp: Sat 2008-05-24 21:57:58 +0400
message:
WL#3726 "DDL locking for all metadata objects".
Fix for assert failures in kill.test which occured when one
tried to kill ALTER TABLE statement on merge table while it
was waiting in wait_while_table_is_used() for other connections
to close this table.
These assert failures stemmed from the fact that cleanup code
in this case assumed that temporary table representing new
version of table was open with adding to THD::temporary_tables
list while code which were opening this temporary table wasn't
always fulfilling this.
This patch changes code that opens new version of table to
always do this linking in. It also streamlines cleanup process
for cases when error occurs while we have new version of table
open.
******
WL#3726 "DDL locking for all metadata objects"
Add libmysqld/mdl.cc to .bzrignore.
******
Backport of:
------------------------------------------------------------
revno: 2630.4.6
committer: Dmitry Lenev <dlenev@mysql.com>
branch nick: mysql-6.0-3726-w
timestamp: Sun 2008-05-25 00:33:22 +0400
message:
WL#3726 "DDL locking for all metadata objects".
Addition to the fix of assert failures in kill.test caused by
changes for this worklog.
Make sure we close the new table only once.
Enable partition_innodb_plugin.test for BUG#32430
applied revisions: r6134, r6137, r6153
Detailed revision comments:
r6134 | marko | 2009-11-04 09:57:29 +0200 (Wed, 04 Nov 2009) | 5 lines
branches/zip: innobase_convert_identifier(): Convert table names with
explain_filename() to address Bug #32430: 'show innodb status'
causes errors Invalid (old?) table or database name in logs.
rb://134 approved by Sunny Bains
r6137 | marko | 2009-11-04 15:24:28 +0200 (Wed, 04 Nov 2009) | 1 line
branches/zip: dict_index_too_big_for_undo(): Correct a typo.
r6153 | vasil | 2009-11-10 15:33:22 +0200 (Tue, 10 Nov 2009) | 145 lines
branches/zip: Merge r6125:6152 from branches/5.1:
(everything except the last white-space change was skipped as it is already
in branches/zip)
------------------------------------------------------------------------
r6127 | vasil | 2009-10-30 11:18:25 +0200 (Fri, 30 Oct 2009) | 18 lines
Changed paths:
M /branches/5.1/Makefile.am
M /branches/5.1/mysql-test/innodb-autoinc.result
M /branches/5.1/mysql-test/innodb-autoinc.test
branches/5.1:
Backport c6121 from branches/zip:
------------------------------------------------------------------------
r6121 | sunny | 2009-10-30 01:42:11 +0200 (Fri, 30 Oct 2009) | 7 lines
Changed paths:
M /branches/zip/mysql-test/innodb-autoinc.result
branches/zip: This test has been problematic for sometime now. The underlying
bug is that the data dictionaries get out of sync. In the AUTOINC code we
try and apply salve to the symptoms. In the past MySQL made some unrelated
change and the dictionaries stopped getting out of sync and this test started
to fail. Now, it seems they have reverted that changed and the test is
passing again. I suspect this is not he last time that this test will change.
------------------------------------------------------------------------
------------------------------------------------------------------------
r6129 | vasil | 2009-10-30 17:14:22 +0200 (Fri, 30 Oct 2009) | 4 lines
Changed paths:
M /branches/5.1/Makefile.am
branches/5.1:
Revert a change to Makefile.am that sneaked unnoticed in c6127.
------------------------------------------------------------------------
r6136 | marko | 2009-11-04 12:28:10 +0200 (Wed, 04 Nov 2009) | 15 lines
Changed paths:
M /branches/5.1/handler/ha_innodb.cc
M /branches/5.1/include/ha_prototypes.h
M /branches/5.1/ut/ut0ut.c
branches/5.1: Port r6134 from branches/zip:
------------------------------------------------------------------------
r6134 | marko | 2009-11-04 07:57:29 +0000 (Wed, 04 Nov 2009) | 5 lines
branches/zip: innobase_convert_identifier(): Convert table names with
explain_filename() to address Bug #32430: 'show innodb status'
causes errors Invalid (old?) table or database name in logs.
rb://134 approved by Sunny Bains
------------------------------------------------------------------------
innobase_print_identifier(): Replace with innobase_convert_name().
innobase_convert_identifier(): New function, called by innobase_convert_name().
------------------------------------------------------------------------
r6149 | vasil | 2009-11-09 11:15:01 +0200 (Mon, 09 Nov 2009) | 5 lines
Changed paths:
M /branches/5.1/CMakeLists.txt
branches/5.1:
Followup to r5700: Adjust the changes so they are the same as in the BZR
repository.
------------------------------------------------------------------------
r6150 | vasil | 2009-11-09 11:43:31 +0200 (Mon, 09 Nov 2009) | 58 lines
Changed paths:
M /branches/5.1/handler/ha_innodb.cc
branches/5.1:
Merge a part of r2911.5.5 from MySQL:
(the other part of this was merged in c5700)
------------------------------------------------------------
revno: 2911.5.5
committer: Vladislav Vaintroub <vvaintroub@mysql.com>
branch nick: 5.1-innodb_plugin
timestamp: Wed 2009-06-10 10:59:49 +0200
message:
Backport WL#3653 to 5.1 to enable bundled innodb plugin.
Remove custom DLL loader code from innodb plugin code, use
symbols exported from mysqld.
removed:
storage/innodb_plugin/handler/handler0vars.h
storage/innodb_plugin/handler/win_delay_loader.cc
added:
storage/mysql_storage_engine.cmake
win/create_def_file.js
modified:
CMakeLists.txt
include/m_ctype.h
include/my_global.h
include/my_sys.h
include/mysql/plugin.h
libmysqld/CMakeLists.txt
mysql-test/mysql-test-run.pl
mysql-test/t/plugin.test
mysql-test/t/plugin_load-master.opt
mysys/charset.c
sql/CMakeLists.txt
sql/handler.h
sql/mysql_priv.h
sql/mysqld.cc
sql/sql_class.cc
sql/sql_class.h
sql/sql_list.h
sql/sql_profile.h
storage/Makefile.am
storage/archive/CMakeLists.txt
storage/blackhole/CMakeLists.txt
storage/csv/CMakeLists.txt
storage/example/CMakeLists.txt
storage/federated/CMakeLists.txt
storage/heap/CMakeLists.txt
storage/innobase/CMakeLists.txt
storage/innobase/handler/ha_innodb.cc
storage/innodb_plugin/CMakeLists.txt
storage/innodb_plugin/handler/ha_innodb.cc
storage/innodb_plugin/handler/handler0alter.cc
storage/innodb_plugin/handler/i_s.cc
storage/innodb_plugin/plug.in
storage/myisam/CMakeLists.txt
storage/myisammrg/CMakeLists.txt
win/Makefile.am
win/configure.js
------------------------------------------------------------------------
r6152 | vasil | 2009-11-10 15:30:20 +0200 (Tue, 10 Nov 2009) | 4 lines
Changed paths:
M /branches/5.1/handler/ha_innodb.cc
branches/5.1:
White space fixup.
------------------------------------------------------------------------
1. BUG#48482 - innodb-autoinc.test fails with results difference
2. enable the disabled test
Detailed revision comments:
r6230 | sunny | 2009-11-24 23:52:43 +0200 (Tue, 24 Nov 2009) | 3 lines
branches/5.1: Fix autoinc failing test results.
(this should be skipped when merging 5.1 into zip)
