DROP TABLE on child and UPDATE of parent table can cause an MDL BF-BF
conflict when applied concurrently.
DROP TABLE takes MDL locks on both child and its parent table, however
it only it did not add certification keys for the parent table.
This patch adds the following:
* Append certification keys corresponding to all parent tables
before DROP TABLE replication.
* Fix wsrep_append_fk_parent_table() so that it works when it is
given a table list containing temporary tables.
* Make sure function wsrep_append_fk_parent_table() is only called
for local transaction. That was not the case for ALTER TABLE.
* Add a test case that verifies that UPDATE parent depends on
preceeding DROP TABLE child.
* Adapt galera_ddl_fk_conflict test to work with DROP TABLE as well.
Signed-off-by: Julius Goryavsky <julius.goryavsky@mariadb.com>
Problem was that total order isolation (TOI) is started before
we know sequence implementing storage engine. This led to
situation where table implementing persistent storate
for sequence in case of MyISAM was created on applier causing
errors later in test execution.
Therefore, in both CREATE SEQUENCE and ALTER TABLE to implementing
persistent storage we need to check implementing storage engine
after open_tables and this check must be done in both master
and applier, because if implementing storage engine is MyISAM
it does not support rollback.
Added tests to make sure that if sequence implementing storage
engine is MyISAM or we try to alter it to MyISAM user gets error
and changes are not replicated.
Signed-off-by: Julius Goryavsky <julius.goryavsky@mariadb.com>
The MDEV-29693 conflict resolution is from Monty, as well as is
a bug fix where ANALYZE TABLE wrongly built histograms for
single-column PRIMARY KEY.
Also includes a fix for safe_malloc error reporting.
Other things:
- Copied main.log_slow from 10.4 to avoid mtr issue
Disabled test:
- spider/bugfix.mdev_27239 because we started to get
+Error 1429 Unable to connect to foreign data source: localhost
-Error 1158 Got an error reading communication packets
- main.delayed
- Bug#54332 Deadlock with two connections doing LOCK TABLE+INSERT DELAYED
This part is disabled for now as it fails randomly with different
warnings/errors (no corruption).
Example of what causes the problem:
T1: ANALYZE TABLE starts to collect statistics
T2: ALTER TABLE starts by deleting statistics for all changed fields,
then creates a temp table and copies data to it.
T1: ANALYZE ends and writes to the statistics tables.
T2: ALTER TABLE renames temp table in place of the old table.
Now the statistics from analyze matches the old deleted tables.
Fixed by waiting to delete old statistics until ALTER TABLE is
the only one using the old table and ensure that rename of columns
can handle swapping of column names.
rename_columns_in_stat_table() (former rename_column_in_stat_tables())
now takes a list of columns to rename. It uses the following algorithm
to update column_stats to be able to handle circular renames
- While there are columns to be renamed and it is the first loop or
last rename loop did change something.
- Loop over all columns to be renamed
- Change column name in column_stat
- If fail because of duplicate key
- If this is first change attempt for this column
- Change column name to a temporary column name
- If there was a conflicting row, replace it with the current row.
else
- Remove entry from column list
- Loop over all remaining columns in the list
- Remove the conflicting row
- Change column from temporary name to final name in column_stat
Other things:
- Don't flush tables for every operation. Only flush when all updates
are done.
- Rename of columns was not handled in case of ALGORITHM=copy (old bug).
- Fixed that we do not collect statistics for hidden hash columns
used by UNIQUE constraint on long values.
- Fixed that we do not collect statistics for blob columns referred by
generated virtual columns. This was achieved by storing the fields for
which we want to have statistics in table->has_value_set instead of
in table->read_set.
- Rename of indexes was not handled for persistent statistics.
- This is now handled similar as rename of columns. Renamed columns
are now stored in 'rename_stat_indexes' and handled in
Alter_info::delete_statistics() together with drooped indexes.
- ALTER TABLE .. ADD INDEX may instead of creating a new index rename
an existing generated foreign key index. This was not reflected in
the index_stats table because this was handled in
mysql_prepare_create_table instead instead of in the mysql_alter() code.
Fixed by adding a call in mysql_prepare_create_table() to drop the
changed index.
I also had to change the code that 'marked the index' to be ignored
with code that would not destroy the original index name.
Reviewer: Sergei Petrunia <sergey@mariadb.com>
when validating vcol's (default, check, etc) in ALTER TABLE
vcol_info->flags are modified in place. This means that if ALTER TABLE
fails for any reason we need to restore them to their original values.
(mroonga was freeing the memory on ::reset() but not on ::close())
* invoke check_expression() for all vcol_info's in
mysql_prepare_create_table() to check for FK CASCADE
* also check for SET NULL and SET DEFAULT
* to check against existing FKs when a vcol is added in ALTER TABLE,
old FKs must be added to the new_key_list just like other indexes are
* check columns recursively, if vcol1 references vcol2,
flags of vcol2 must be taken into account
* remove check_table_name_processor(), put that logic under
check_vcol_func_processor() to avoid walking the tree twice
Problem was that in ALTER TABLE execution variables were set
to 1 even when wsrep_auto_increment_control is OFF. We should
set them only when wsrep_auto_increment_control is ON.
Also fixes
MDEV-27782 Wrong columns when using table level `CHARACTER SET utf8mb4 COLLATE DEFAULT`
MDEV-28644 Unexpected error on ALTER TABLE t1 CONVERT TO CHARACTER SET utf8mb3, DEFAULT CHARACTER SET utf8mb4
This commit implements two phase binloggable ALTER.
When a new
@@session.binlog_alter_two_phase = YES
ALTER query gets logged in two parts, the START ALTER and the COMMIT
or ROLLBACK ALTER. START Alter is written in binlog as soon as
necessary locks have been acquired for the table. The timing is
such that any concurrent DML:s that update the same table are either
committed, thus logged into binary log having done work on the old
version of the table, or will be queued for execution on its new
version.
The "COMPLETE" COMMIT or ROLLBACK ALTER are written at the very point
of a normal "single-piece" ALTER that is after the most of
the query work is done. When its result is positive COMMIT ALTER is
written, otherwise ROLLBACK ALTER is written with specific error
happened after START ALTER phase.
Replication of two-phase binloggable ALTER is
cross-version safe. Specifically the OLD slave merely does not
recognized the start alter part, still being able to process and
memorize its gtid.
Two phase logged ALTER is read from binlog by mysqlbinlog to produce
BINLOG 'string', where 'string' contains base64 encoded
Query_log_event containing either the start part of ALTER, or a
completion part. The Query details can be displayed with `-v` flag,
similarly to ROW format events. Notice, mysqlbinlog output containing
parts of two-phase binloggable ALTER is processable correctly only by
binlog_alter_two_phase server.
@@log_warnings > 2 can reveal details of binlogging and slave side
processing of the ALTER parts.
The current commit also carries fixes to the following list of
reported bugs:
MDEV-27511, MDEV-27471, MDEV-27349, MDEV-27628, MDEV-27528.
Thanks to all people involved into early discussion of the feature
including Kristian Nielsen, those who helped to design, implement and
test: Sergei Golubchik, Andrei Elkin who took the burden of the
implemenation completion, Sujatha Sivakumar, Brandon
Nesterenko, Alice Sherepa, Ramesh Sivaraman, Jan Lindstrom.
mysql_prepare_create_table() does my_qsort(sort_keys) on key
info. This sorting is indeterministic: a table is created with one
order and inplace alter may overwrite frm with another order. Since
inplace alter does nothing about key info for MyISAM/Aria storage
engines this results in discrepancy between frm and storage engine key
definitions.
The fix avoids the sorting of keys when no new keys added by ALTER
(and this is ok for MyISAM/Aria since it cannot add new keys inplace).
There is a case when implicit primary key may be changed when removing
NOT NULL from the part of unique key. In that case we update
modified_primary_key which is then used to not skip key sorting.
According to is_candidate_key() there is no other cases when primary
key may be changed implicitly.
Notes:
mi_keydef_write()/mi_keyseg_write() are used only in mi_create(). They
should be used in ha_inplace_alter_table() as well.
Aria corruption detection is unimplemented: maria_check_definition()
is never used!
MySQL 8.0 has this bug as well as of 8.0.26.
There is a case when implicit primary key may be changed when removing
NOT NULL from the part of unique key. In that case we update
modified_primary_key which is then used to not skip key sorting.
According to is_candidate_key() there is no other cases when primary
kay may be changed implicitly.
Syntax for CONVERT TABLE
ALTER TABLE tbl_name CONVERT TABLE tbl_name TO PARTITION partition_name partition_spec
Examples:
ALTER TABLE t1 CONVERT TABLE tp2 TO PARTITION p2 VALUES LESS THAN MAX_VALUE();
New ALTER_PARTITION_CONVERT_IN command for
fast_alter_partition_table() is done in alter_partition_convert_in()
function which basically does ha_rename_table().
Table structure and data check is basically the same as in EXCHANGE
PARTITION command. And these are done by
compare_table_with_partition() and check_table_data().
Atomic DDL is done by the scheme from MDEV-22166 (see the
corresponding commit message). The only differnce is that it also has
to drop source table frm and that is done by WFRM_DROP_CONVERTED_FROM.
Initial patch was done by Dmitry Shulga <dmitry.shulga@mariadb.com>
Syntax for CONVERT keyword
ALTER TABLE tbl_name
[alter_option [, alter_option] ...] |
[partition_options]
partition_option: {
...
| CONVERT PARTITION partition_name TO TABLE tbl_name
}
Examples:
ALTER TABLE t1 CONVERT PARTITION p2 TO TABLE tp2;
New ALTER_PARTITION_CONVERT_OUT command for
fast_alter_partition_table() is done in alter_partition_convert_out()
function which basically does ha_rename_table().
Partition to extract is marked with the same flag as dropped
partition: PART_TO_BE_DROPPED. Note that we cannot have multiple
partitioning commands in one ALTER.
For DDL logging basically the principle is the same as for other
fast_alter_partition_table() commands. The only difference is that it
integrates late Atomic DDL functions and introduces additional phase
of WFRM_BACKUP_ORIGINAL. That is required for binlog consistency
because otherwise we could not revert back after WFRM_INSTALL_SHADOW
is done. And before DDL log is complete if we crash or fail the
altered table will be already new but binlog will miss that ALTER
command. Note that this is different from all other atomic DDL in that
it rolls back until the ddl_log_complete() is done even if everything
was done fully before the crash.
Test cases added to:
parts.alter_table \
parts.partition_debug \
versioning.partition \
atomic.alter_partition
Static analyzer built in Eclipse CDT complained about missing initializers in
constructors of the class Alter_table_ctx so I've added them in order to
eliminate annoying warnings.
This is a backport of
commit fd9ca2a742 (MDEV-23295) and
commit 9a156e1a23 (MDEV-23345) to 10.3.
An instant ADD/DROP/reorder column could create a dummy table
object with the wrong ROW_FORMAT when innodb_default_row_format
was changed between CREATE TABLE and ALTER TABLE.
prepare_inplace_alter_table_dict(): If we had promised that
ALGORITHM=INPLACE is supported, we must preserve the ROW_FORMAT.
The rest of the changes are related to adding
Alter_inplace_info::inplace_supported to cache the return value of
handler::check_if_supported_inplace_alter().
