General overview:
The logic for switching to row format when binlog_format=MIXED had
numerous flaws. The underlying problem was the lack of a consistent
architecture.
General purpose of this changeset:
This changeset introduces an architecture for switching to row format
when binlog_format=MIXED. It enforces the architecture where it has
to. It leaves some bugs to be fixed later. It adds extensive tests to
verify that unsafe statements work as expected and that appropriate
errors are produced by problems with the selection of binlog format.
It was not practical to split this into smaller pieces of work.
Problem 1:
To determine the logging mode, the code has to take several parameters
into account (namely: (1) the value of binlog_format; (2) the
capabilities of the engines; (3) the type of the current statement:
normal, unsafe, or row injection). These parameters may conflict in
several ways, namely:
- binlog_format=STATEMENT for a row injection
- binlog_format=STATEMENT for an unsafe statement
- binlog_format=STATEMENT for an engine only supporting row logging
- binlog_format=ROW for an engine only supporting statement logging
- statement is unsafe and engine does not support row logging
- row injection in a table that does not support statement logging
- statement modifies one table that does not support row logging and
one that does not support statement logging
Several of these conflicts were not detected, or were detected with
an inappropriate error message. The problem of BUG#39934 was that no
appropriate error message was written for the case when an engine
only supporting row logging executed a row injection with
binlog_format=ROW. However, all above cases must be handled.
Fix 1:
Introduce new error codes (sql/share/errmsg.txt). Ensure that all
conditions are detected and handled in decide_logging_format()
Problem 2:
The binlog format shall be determined once per statement, in
decide_logging_format(). It shall not be changed before or after that.
Before decide_logging_format() is called, all information necessary to
determine the logging format must be available. This principle ensures
that all unsafe statements are handled in a consistent way.
However, this principle is not followed:
thd->set_current_stmt_binlog_row_based_if_mixed() is called in several
places, including from code executing UPDATE..LIMIT,
INSERT..SELECT..LIMIT, DELETE..LIMIT, INSERT DELAYED, and
SET @@binlog_format. After Problem 1 was fixed, that caused
inconsistencies where these unsafe statements would not print the
appropriate warnings or errors for some of the conflicts.
Fix 2:
Remove calls to THD::set_current_stmt_binlog_row_based_if_mixed() from
code executed after decide_logging_format(). Compensate by calling the
set_current_stmt_unsafe() at parse time. This way, all unsafe statements
are detected by decide_logging_format().
Problem 3:
INSERT DELAYED is not unsafe: it is logged in statement format even if
binlog_format=MIXED, and no warning is printed even if
binlog_format=STATEMENT. This is BUG#45825.
Fix 3:
Made INSERT DELAYED set itself to unsafe at parse time. This allows
decide_logging_format() to detect that a warning should be printed or
the binlog_format changed.
Problem 4:
LIMIT clause were not marked as unsafe when executed inside stored
functions/triggers/views/prepared statements. This is
BUG#45785.
Fix 4:
Make statements containing the LIMIT clause marked as unsafe at
parse time, instead of at execution time. This allows propagating
unsafe-ness to the view.
mysql-test/extra/rpl_tests/create_recursive_construct.inc:
Added auxiliary file used by binlog_unsafe.test to create and
execute recursive constructs
(functions/procedures/triggers/views/prepared statements).
mysql-test/extra/rpl_tests/rpl_foreign_key.test:
removed unnecessary set @@session.binlog_format
mysql-test/extra/rpl_tests/rpl_insert_delayed.test:
Filter out table id from table map events in binlog listing.
Got rid of $binlog_format_statement.
mysql-test/extra/rpl_tests/rpl_ndb_apply_status.test:
disable warnings around call to unsafe procedure
mysql-test/include/rpl_udf.inc:
Disabled warnings for code that generates warnings
for some binlog formats. That would otherwise cause
inconsistencies in the result file.
mysql-test/r/mysqldump.result:
Views are now unsafe if they contain a LIMIT clause.
That fixed BUG#45831. Due to BUG#45832, a warning is
printed for the CREATE VIEW statement.
mysql-test/r/sp_trans.result:
Unsafe statements in stored procedures did not give a warning if
binlog_format=statement. This is BUG#45824. Now they do, so this
result file gets a new warning.
mysql-test/suite/binlog/r/binlog_multi_engine.result:
Error message changed.
mysql-test/suite/binlog/r/binlog_statement_insert_delayed.result:
INSERT DELAYED didn't generate a warning when binlog_format=STATEMENT.
That was BUG#45825. Now there is a warning, so result file needs to be
updated.
mysql-test/suite/binlog/r/binlog_stm_ps.result:
Changed error message.
mysql-test/suite/binlog/r/binlog_unsafe.result:
updated result file:
- error message changed
- added test for most combinations of unsafe constructs invoked
from recursive constructs
- INSERT DELAYED now gives a warning (because BUG#45826 is fixed)
- INSERT..SELECT..LIMIT now gives a warning from inside recursive
constructs (because BUG#45785 was fixed)
- When a recursive construct (e.g., stored proc or function)
contains more than one statement, at least one of which is
unsafe, then all statements in the recursive construct give
warnings. This is a new bug introduced by this changeset.
It will be addressed in a post-push fix.
mysql-test/suite/binlog/t/binlog_innodb.test:
Changed error code for innodb updates with READ COMMITTED or
READ UNCOMMITTED transaction isolation level and
binlog_format=statement.
mysql-test/suite/binlog/t/binlog_multi_engine.test:
The error code has changed for statements where more than one
engine is involved and one of them is self-logging.
mysql-test/suite/binlog/t/binlog_unsafe-master.opt:
Since binlog_unsafe now tests unsafe-ness of UDF's, we need an extra
flag in the .opt file.
mysql-test/suite/binlog/t/binlog_unsafe.test:
- Clarified comment.
- Rewrote first part of test. Now it tests not only unsafe variables
and functions, but also unsafe-ness due to INSERT..SELECT..LIMIT,
INSERT DELAYED, insert into two autoinc columns, use of UDF's, and
access to log tables in the mysql database.
Also, in addition to functions, procedures, triggers, and prepared
statements, it now also tests views; and it constructs recursive
calls in two levels by combining these recursive constructs.
Part of the logic is in extra/rpl_tests/create_recursive_construct.inc.
- added tests for all special system variables that should not be unsafe.
- added specific tests for BUG#45785 and BUG#45825
mysql-test/suite/rpl/r/rpl_events.result:
updated result file
mysql-test/suite/rpl/r/rpl_extraColmaster_innodb.result:
updated result file
mysql-test/suite/rpl/r/rpl_extraColmaster_myisam.result:
updated result file
mysql-test/suite/rpl/r/rpl_foreign_key_innodb.result:
updated result file
mysql-test/suite/rpl/r/rpl_idempotency.result:
updated result file
mysql-test/suite/rpl/r/rpl_mix_found_rows.result:
Split rpl_found_rows.test into rpl_mix_found_rows.test (a new file) and
rpl_stm_found_rows.test (renamed rpl_found_rows.test). This file equals
the second half of the old rpl_found_rows.result, with the following
modifications:
- minor formatting changes
- additional initialization
mysql-test/suite/rpl/r/rpl_mix_insert_delayed.result:
Moved out code operating in mixed mode from rpl_stm_insert_delayed
(into rpl_mix_insert_delayed) and got rid of explicit setting of
binlog format.
mysql-test/suite/rpl/r/rpl_rbr_to_sbr.result:
updated result file
mysql-test/suite/rpl/r/rpl_row_idempotency.result:
Moved the second half of rpl_idempotency.test, which only
executed in row mode, to rpl_row_idempotency.test. This is
the new result file.
mysql-test/suite/rpl/r/rpl_row_insert_delayed.result:
Got rid of unnecessary explicit setting of binlog format.
mysql-test/suite/rpl/r/rpl_stm_found_rows.result:
Split rpl_found_rows.test into rpl_mix_found_rows.test (a new file) and
rpl_stm_found_rows.test (renamed rpl_found_rows.test). Changes in
this file:
- minor formatting changes
- warning is now issued for unsafe statements inside procedures
(since BUG#45824 is fixed)
- second half of file is moved to rpl_mix_found_rows.result
mysql-test/suite/rpl/r/rpl_stm_insert_delayed.result:
Moved out code operating in mixed mode from rpl_stm_insert_delayed
(into rpl_mix_insert_delayed) and got rid of explicit setting of
binlog format.
mysql-test/suite/rpl/r/rpl_stm_loadfile.result:
error message changed
mysql-test/suite/rpl/r/rpl_temporary_errors.result:
updated result file
mysql-test/suite/rpl/r/rpl_udf.result:
Remove explicit set of binlog format (and triplicate test execution)
and rely on test system executing the test in all binlog formats.
mysql-test/suite/rpl/t/rpl_bug31076.test:
Test is only valid in mixed or row mode since it generates row events.
mysql-test/suite/rpl/t/rpl_events.test:
Removed explicit set of binlog_format and removed duplicate testing.
Instead, we rely on the test system to try all binlog formats.
mysql-test/suite/rpl/t/rpl_extraColmaster_innodb.test:
Removed triplicate testing and instead relying on test system.
Test is only relevant for row format since statement-based replication
cannot handle extra columns on master.
mysql-test/suite/rpl/t/rpl_extraColmaster_myisam.test:
Removed triplicate testing and instead relying on test system.
Test is only relevant for row format since statement-based replication
cannot handle extra columns on master.
mysql-test/suite/rpl/t/rpl_idempotency-slave.opt:
Removed .opt file to avoid server restarts.
mysql-test/suite/rpl/t/rpl_idempotency.test:
- Moved out row-only tests to a new test file, rpl_row_idempotency.test.
rpl_idempotency now only contains tests that execute in all
binlog_formats.
- While I was here, also removed .opt file to avoid server restarts.
The slave_exec_mode is now set inside the test instead.
mysql-test/suite/rpl/t/rpl_mix_found_rows.test:
Split rpl_found_rows.test into rpl_mix_found_rows.test (a new file) and
rpl_stm_found_rows.test (renamed rpl_found_rows.test). This file
contains the second half of the original rpl_found_rows.test with the
follwing changes:
- initialization
- removed SET_BINLOG_FORMAT and added have_binlog_format_mixed.inc
- minor formatting changes
mysql-test/suite/rpl/t/rpl_mix_insert_delayed.test:
Moved out code operating in mixed mode from rpl_stm_insert_delayed
(into rpl_mix_insert_delayed) and got rid of explicit setting of
binlog format.
mysql-test/suite/rpl/t/rpl_rbr_to_sbr.test:
Test cannot execute in statement mode, since we no longer
switch to row format when binlog_format=statement.
Enforced mixed mode throughout the test.
mysql-test/suite/rpl/t/rpl_row_idempotency.test:
Moved the second half of rpl_idempotency.test, which only
executed in row mode, to this new file. We now rely on the
test system to set binlog format.
mysql-test/suite/rpl/t/rpl_row_insert_delayed.test:
- Got rid of unnecessary explicit setting of binlog format.
- extra/rpl_tests/rpl_insert_delayed.test does not need the
$binlog_format_statement variable any more, so that was
removed.
mysql-test/suite/rpl/t/rpl_slave_skip.test:
The test switches binlog_format internally and master generates both
row and statement events. Hence, the slave must be able to log in both
statement and row format. Hence test was changed to only execute in
mixed mode.
mysql-test/suite/rpl/t/rpl_stm_found_rows.test:
Split rpl_found_rows.test into rpl_mix_found_rows.test (a new file) and
rpl_stm_found_rows.test (renamed rpl_found_rows.test). Changes in
this file:
- minor formatting changes
- added have_binlog_format_statement and removed SET BINLOG_FORMAT.
- second half of file is moved to rpl_mix_found_rows.test
- added cleanup code
mysql-test/suite/rpl/t/rpl_stm_insert_delayed.test:
Moved out code operating in mixed mode from rpl_stm_insert_delayed
(into rpl_mix_insert_delayed) and got rid of explicit setting of
binlog format.
mysql-test/suite/rpl/t/rpl_switch_stm_row_mixed.test:
The test switches binlog_format internally and master generates both
row and statement events. Hence, the slave must be able to log in both
statement and row format. Hence test was changed to only execute in
mixed mode on slave.
mysql-test/suite/rpl/t/rpl_temporary_errors.test:
Removed explicit set of binlog format. Instead, the test now only
executes in row mode.
mysql-test/suite/rpl/t/rpl_udf.test:
Remove explicit set of binlog format (and triplicate test execution)
and rely on test system executing the test in all binlog formats.
mysql-test/suite/rpl_ndb/combinations:
Added combinations file for rpl_ndb.
mysql-test/suite/rpl_ndb/r/rpl_ndb_binlog_format_errors.result:
new result file
mysql-test/suite/rpl_ndb/r/rpl_ndb_circular_simplex.result:
updated result file
mysql-test/suite/rpl_ndb/t/rpl_ndb_2innodb.test:
The test needs slave to be able to switch to row mode, so the
test was changed to only execute in mixed and row mode.
mysql-test/suite/rpl_ndb/t/rpl_ndb_2myisam.test:
The test needs slave to be able to switch to row mode, so the
test was changed to only execute in mixed and row mode.
mysql-test/suite/rpl_ndb/t/rpl_ndb_basic.test:
The test needs slave to be able to switch to row mode, so the
test was changed to only execute in mixed and row mode.
mysql-test/suite/rpl_ndb/t/rpl_ndb_binlog_format_errors-master.opt:
new option file
mysql-test/suite/rpl_ndb/t/rpl_ndb_binlog_format_errors-slave.opt:
new option file
mysql-test/suite/rpl_ndb/t/rpl_ndb_binlog_format_errors.test:
New test case to verify all errors and warnings generated by
decide_logging_format.
mysql-test/suite/rpl_ndb/t/rpl_ndb_blob.test:
The test needs slave to be able to switch to row mode, so the
test was changed to only execute in mixed and row mode.
mysql-test/suite/rpl_ndb/t/rpl_ndb_blob2.test:
The test needs slave to be able to switch to row mode, so the
test was changed to only execute in mixed and row mode.
mysql-test/suite/rpl_ndb/t/rpl_ndb_circular.test:
The test needs slave to be able to switch to row mode, so the
test was changed to only execute in mixed and row mode.
mysql-test/suite/rpl_ndb/t/rpl_ndb_circular_simplex.test:
The test needs slave to be able to switch to row mode, so the
test was changed to only execute in mixed and row mode.
While I was here, also made the test clean up after itself.
mysql-test/suite/rpl_ndb/t/rpl_ndb_commit_afterflush.test:
The test needs slave to be able to switch to row mode, so the
test was changed to only execute in mixed and row mode.
mysql-test/suite/rpl_ndb/t/rpl_ndb_ctype_ucs2_def.test:
The test needs slave to be able to switch to row mode, so the
test was changed to only execute in mixed and row mode.
mysql-test/suite/rpl_ndb/t/rpl_ndb_delete_nowhere.test:
The test needs slave to be able to switch to row mode, so the
test was changed to only execute in mixed and row mode.
mysql-test/suite/rpl_ndb/t/rpl_ndb_do_db.test:
The test needs slave to be able to switch to row mode, so the
test was changed to only execute in mixed and row mode.
mysql-test/suite/rpl_ndb/t/rpl_ndb_do_table.test:
The test needs slave to be able to switch to row mode, so the
test was changed to only execute in mixed and row mode.
mysql-test/suite/rpl_ndb/t/rpl_ndb_func003.test:
The test needs slave to be able to switch to row mode, so the
test was changed to only execute in mixed and row mode.
mysql-test/suite/rpl_ndb/t/rpl_ndb_innodb_trans.test:
The test needs slave to be able to switch to row mode, so the
test was changed to only execute in mixed and row mode.
mysql-test/suite/rpl_ndb/t/rpl_ndb_insert_ignore.test:
The test needs slave to be able to switch to row mode, so the
test was changed to only execute in mixed and row mode.
mysql-test/suite/rpl_ndb/t/rpl_ndb_mixed_engines_transactions.test:
The test needs slave to be able to switch to row mode, so the
test was changed to only execute in mixed and row mode.
mysql-test/suite/rpl_ndb/t/rpl_ndb_multi_update3.test:
The test needs slave to be able to switch to row mode, so the
test was changed to only execute in mixed and row mode.
mysql-test/suite/rpl_ndb/t/rpl_ndb_rep_ignore.test:
The test needs slave to be able to switch to row mode, so the
test was changed to only execute in mixed and row mode.
mysql-test/suite/rpl_ndb/t/rpl_ndb_row_001.test:
The test needs slave to be able to switch to row mode, so the
test was changed to only execute in mixed and row mode.
mysql-test/suite/rpl_ndb/t/rpl_ndb_sp003.test:
The test needs slave to be able to switch to row mode, so the
test was changed to only execute in mixed and row mode.
mysql-test/suite/rpl_ndb/t/rpl_ndb_sp006.test:
The test needs slave to be able to switch to row mode, so the
test was changed to only execute in mixed and row mode.
mysql-test/suite/rpl_ndb/t/rpl_ndb_trig004.test:
The test needs slave to be able to switch to row mode, so the
test was changed to only execute in mixed and row mode.
mysql-test/t/partition_innodb_stmt.test:
Changed error code for innodb updates with READ COMMITTED or
READ UNCOMMITTED transaction isolation level and
binlog_format=statement.
sql/event_db_repository.cc:
Use member function to read current_stmt_binlog_row_based.
sql/events.cc:
Use member function to read current_stmt_binlog_row_based.
sql/ha_ndbcluster_binlog.cc:
reset_current_stmt_binlog_row_based() is not a no-op for the ndb_binlog
thread any more. Instead, the ndb_binlog thread now forces row mode both
initially and just after calling mysql_parse. (mysql_parse() is the only
place where reset_current_stmt_binlog_row_based() may be called from
the ndb_binlog thread, so these are the only two places that need to
change.)
sql/ha_partition.cc:
Use member function to read current_stmt_binlog_row_based.
sql/handler.cc:
Use member function to read current_stmt_binlog_row_based.
sql/item_create.cc:
Added DBUG_ENTER to some functions, to be able to trace when
set_stmt_unsafe is called.
sql/log.cc:
Use member function to read current_stmt_binlog_row_based.
sql/log_event.cc:
- Moved logic for changing to row format out of do_apply_event (and into
decide_logging_format).
- Added @todo comment for post-push cleanup.
sql/log_event_old.cc:
Move logic for changing to row format out of do_apply_event (and into
decide_logging_format).
sql/mysql_priv.h:
Make decide_logging_format() a member of the THD class, for two reasons:
- It is natural from an object-oriented perspective.
- decide_logging_format() needs to access private members of THD
(specifically, the new binlog_warning_flags field).
sql/rpl_injector.cc:
Removed call to set_current_stmt_binlog_row_based().
From now on, only decide_logging_fromat is allowed to modify
current_stmt_binlog_row_based. This call is from the ndb_binlog
thread, mostly executing code in ha_ndbcluster_binlog.cc.
This call can be safely removed, because:
- current_stmt_binlog_row_based is initialized for the ndb_binlog
thread's THD object when the THD object is created. So we're
not going to read uninitialized memory.
- The behavior of ndb_binlog thread does not use the state of the
current_stmt_binlog_row_based. It is conceivable that the
ndb_binlog thread would rely on the current_stmt_binlog_format
in two situations:
(1) when it calls mysql_parse;
(2) when it calls THD::binlog_query.
In case (1), it always clears THD::options&OPTION_BIN_LOG (because
run_query() in ha_ndbcluster_binlog.cc is only called with
disable_binlogging = TRUE).
In case (2), it always uses qtype=STMT_QUERY_TYPE.
sql/set_var.cc:
Added @todo comment for post-push cleanup.
sql/share/errmsg.txt:
Added new error messages and clarified ER_BINLOG_UNSAFE_STATEMENT.
sql/sp.cc:
Added DBUG_ENTER, to be able to trace when set_stmt_unsafe is called.
Got rid of MYSQL_QUERY_TYPE: it was equivalent to STMT_QUERY_TYPE.
sql/sp_head.cc:
Use member function to read current_stmt_binlog_row_based.
sql/sp_head.h:
Added DBUG_ENTER, to be able to trace when set_stmt_unsafe is called.
sql/sql_acl.cc:
Got rid of MYSQL_QUERY_TYPE: it was equivalent to STMT_QUERY_TYPE.
sql/sql_base.cc:
- Made decide_logging_format take care of all logic for deciding the
logging format, and for determining the related warnings and errors.
See comment above decide_logging_format for details.
- Made decide_logging_format a member function of THD, since it needs
to access private members of THD and since its purpose is to update
the state of a THD object.
- Added DBUG_ENTER, to be able to trace when set_stmt_unsafe is called.
sql/sql_class.cc:
- Moved logic for determining unsafe warnings away from THD::binlog_query
(and into decide_logging_format()). Now, it works like this:
1. decide_logging_format detects that the current statement shall
produce a warning, if it ever makes it to the binlog
2. decide_logging_format sets a flag of THD::binlog_warning_flags.
3. THD::binlog_query reads the flag. If the flag is set, it generates
a warning.
- Use member function to read current_stmt_binlog_row_based.
sql/sql_class.h:
- Added THD::binlog_warning_flags (see sql_class.cc for explanation).
- Made decide_logging_format() and reset_for_next_command() member
functions of THD (instead of standalone functions). This was needed
for two reasons: (1) the functions need to access the private member
THD::binlog_warning_flags; (2) the purpose of these functions is to
update the staet of a THD object, so from an object-oriented point
of view they should be member functions.
- Encapsulated current_stmt_binlog_row_based, so it is now private and
can only be accessed from a member function. Also changed the
data type to an enumeration instead of a bool.
- Removed MYSQL_QUERY_TYPE, because it was equivalent to
STMT_QUERY_TYPE anyways.
- When reset_current_stmt_binlog_row_based was called from the
ndb_binlog thread, it would behave as a no-op. This special
case has been removed, and the behavior of
reset_current_stmt_binlog_row_based does not depend on which thread
calls it any more. The special case did not serve any purpose,
since the ndb binlog thread did not take the
current_stmt_binlog_row_based flag into account anyways.
sql/sql_delete.cc:
- Moved logic for setting row format for DELETE..LIMIT away from
mysql_prepare_delete.
(Instead, we mark the statement as unsafe at parse time (sql_yacc.yy)
and rely on decide_logging_format() (sql_class.cc) to set row format.)
This is part of the fix for BUG#45831.
- Use member function to read current_stmt_binlog_row_based.
sql/sql_insert.cc:
- Removed unnecessary calls to thd->lex->set_stmt_unsafe() and
thd->set_current_stmt_binlog_row_based_if_mixed() from
handle_delayed_insert(). The calls are unnecessary because they
have already been made; they were made in the constructor of
the `di' object.
- Since decide_logging_format() is now a member function of THD, code
that calls decide_logging_format() had to be updated.
- Added DBUG_ENTER call, to be able to trace when set_stmt_unsafe is
called.
- Moved call to set_stmt_unsafe() for INSERT..SELECT..LIMIT away from
mysql_insert_select_prepare() (and into decide_logging_format).
This is part of the fix for BUG#45831.
- Use member function to read current_stmt_binlog_row_based.
sql/sql_lex.h:
- Added the flag BINLOG_STMT_FLAG_ROW_INJECTION to enum_binlog_stmt_flag.
This was necessary so that a statement can identify itself as a row
injection.
- Added appropriate setter and getter functions for the new flag.
- Added or clarified some comments.
- Added DBUG_ENTER()
sql/sql_load.cc:
Use member function to read current_stmt_binlog_row_based.
sql/sql_parse.cc:
- Made mysql_reset_thd_for_next_command() clear thd->binlog_warning_flags.
- Since thd->binlog_warning_flags is private, it must be set in a
member function of THD. Hence, moved the body of
mysql_reset_thd_for_next_command() to the new member function
THD::reset_thd_for_next_command(), and made
mysql_reset_thd_for_next_command() call
THD::reset_thd_for_next_command().
- Removed confusing comment.
- Use member function to read current_stmt_binlog_row_based.
sql/sql_repl.cc:
Use member function to read current_stmt_binlog_row_based.
sql/sql_table.cc:
Use member function to read current_stmt_binlog_row_based.
sql/sql_udf.cc:
Use member function to read current_stmt_binlog_row_based.
sql/sql_update.cc:
Moved logic for setting row format for UPDATE..LIMIT away from
mysql_prepare_update.
(Instead, we mark the statement as unsafe at parse time (sql_yacc.yy)
and rely on decide_logging_format() (sql_class.cc) to set row format.)
This is part of the fix for BUG#45831.
sql/sql_yacc.yy:
Made INSERT DELAYED, INSERT..SELECT..LIMIT, UPDATE..LIMIT, and
DELETE..LIMIT mark themselves as unsafe at parse time (instead
of at execution time).
This is part of the fixes BUG#45831 and BUG#45825.
storage/example/ha_example.cc:
Made exampledb accept inserts. This was needed by the new test case
rpl_ndb_binlog_format_errors, because it needs an engine that
is statement-only (and accepts inserts).
storage/example/ha_example.h:
Made exampledb a statement-only engine instead of a row-only engine.
No existing test relied exampledb's row-only capabilities. The new
test case rpl_ndb_binlog_format_errors needs an engine that is
statement-only.
storage/innobase/handler/ha_innodb.cc:
- Changed error error code and message given by innodb when
binlog_format=STATEMENT and transaction isolation level is
READ COMMITTED or READ UNCOMMITTED.
- While I was here, also simplified the condition for
checking when to give the error.
without error
When using quick access methods for searching rows in UPDATE or
DELETE there was no check if a fatal error was not already sent
to the client while evaluating the quick condition.
As a result a false OK (following the error) was sent to the
client and the error was thus transformed into a warning.
Fixed by checking for errors sent to the client during
SQL_SELECT::check_quick() and treating them as real errors.
Fixed a wrong test case in group_min_max.test
Fixed a wrong return code in mysql_update() and mysql_delete()
mysql-test/r/bug40113.result:
Bug #40013: test case
mysql-test/r/group_min_max.result:
Bug #40013: fixed a wrong test case
mysql-test/t/bug40113-master.opt:
Bug #40013: test case
mysql-test/t/bug40113.test:
Bug #40013: test case
mysql-test/t/group_min_max.test:
Bug #40013: fixed a wrong test case
sql/sql_delete.cc:
Bug #40113: check for errors evaluating the quick select
sql/sql_update.cc:
Bug #40113: check for errors evaluating the quick select
Large transactions and statements may corrupt the binary log if the size of the
cache, which is set by the max_binlog_cache_size, is not enough to store the
the changes.
In a nutshell, to fix the bug, we save the position of the next character in the
cache before starting processing a statement. If there is a problem, we simply
restore the position thus removing any effect of the statement from the cache.
Unfortunately, to avoid corrupting the binary log, we may end up loosing changes
on non-transactional tables if they do not fit in the cache. In such cases, we
store an Incident_log_event in order to stop the slave and alert users that some
changes were not logged.
Precisely, for every non-transactional changes that do not fit into the cache,
we do the following:
a) the statement is *not* logged
b) an incident event is logged after committing/rolling back the transaction,
if any. Note that if a failure happens before writing the incident event to
the binary log, the slave will not stop and the master will not have reported
any error.
c) its respective statement gives an error
For transactional changes that do not fit into the cache, we do the following:
a) the statement is *not* logged
b) its respective statement gives an error
To work properly, this patch requires two additional things. Firstly, callers to
MYSQL_BIN_LOG::write and THD::binlog_query must handle any error returned and
take the appropriate actions such as undoing the effects of a statement. We
already changed some calls in the sql_insert.cc, sql_update.cc and sql_insert.cc
modules but the remaining calls spread all over the code should be handled in
BUG#37148. Secondly, statements must be either classified as DDL or DML because
DDLs that do not get into the cache must generate an incident event since they
cannot be rolled back.
with gcc 4.3.2
Compiling MySQL with gcc 4.3.2 and later produces a number of
warnings, many of which are new with the recent compiler
versions.
This bug will be resolved in more than one patch to limit the
size of changesets. This is the second patch, fixing more
of the warnings.
with gcc 4.3.2
Compiling MySQL with gcc 4.3.2 and later produces a number of
warnings, many of which are new with the recent compiler
versions.
This bug will be resolved in more than one patch to limit the
size of changesets. This is the second patch, fixing more
of the warnings.
Make the caller of Query_log_event, Execute_load_log_event
constructors and THD::binlog_query to provide the error code
instead of having the constructors to figure out the error code.
sql/log_event.cc:
Changed constructors of Query_log_event and Execute_load_log_event to accept the error code argument instead of figuring it out by itself
sql/log_event.h:
Changed constructors of Query_log_event and Execute_load_log_event to accept the error code argument
Certain multi-updates gave different results on InnoDB from
to MyISAM, due to on-the-fly updates being used on the former and
the update order matters.
Fixed by turning off on-the-fly updates when update order
dependencies are present.
mysql-test/r/innodb_mysql.result:
Bug#43580: Test result.
mysql-test/suite/rpl/r/rpl_slave_skip.result:
Bug#43580: Changed test result. The InnoDB result is now what it would have been on MyISAM.
mysql-test/t/innodb_mysql.test:
Bug#43580: Test case.
sql/sql_base.cc:
Bug#43580: Added a word of caution about using tmp_set here.
sql/sql_update.cc:
Bug#43580: Fix.
Calls to TABLE::mark_columns_needed_for_update() are moved
from mysql_multi_update_prepare() and right before the decison
to do on-the-fly updates to the place where we do (or don't do)
on-the-fly updates.
When the thread executing a DDL was killed after finished its
execution but before writing the binlog event, the error code in
the binlog event could be set wrongly to ER_SERVER_SHUTDOWN or
ER_QUERY_INTERRUPTED.
This patch fixed the problem by ignoring the kill status when
constructing the event for DDL statements.
This patch also included the following changes in order to
provide the test case.
1) modified mysqltest to support variable for connection command
2) modified mysql-test-run.pl, add new variable MYSQL_SLAVE to
run mysql client against the slave mysqld.
There were so many changes into mtr (this is the new mtr coming) that I rather
copied mtr from 6.0-main here (at least this one knows how to run Maria tests).
I also fixed suite/maria tests to be accepted by the new mtr.
mysys/thr_mutex.c:
adding DBUG_PRINT here, so that we can locate where the warning is issued.
Documented behaviour was broken by the patch for bug 33699
that actually is not a bug.
This fix reverts patch for bug 33699 and reverts the
UPDATE of NOT NULL field with NULL query to old
behavior.
mysql-test/extra/rpl_tests/rpl_extraMaster_Col.test:
Bug #39265: fix for the bug 33699 should be reverted
mysql-test/include/ps_modify.inc:
Bug #39265: fix for the bug 33699 should be reverted
mysql-test/r/auto_increment.result:
Bug #39265: fix for the bug 33699 should be reverted
mysql-test/r/csv_not_null.result:
Bug #39265: fix for the bug 33699 should be reverted
mysql-test/r/null.result:
Bug #39265: fix for the bug 33699 should be reverted
mysql-test/r/ps_2myisam.result:
Bug #39265: fix for the bug 33699 should be reverted
mysql-test/r/ps_3innodb.result:
Bug #39265: fix for the bug 33699 should be reverted
mysql-test/r/ps_4heap.result:
Bug #39265: fix for the bug 33699 should be reverted
mysql-test/r/ps_5merge.result:
Bug #39265: fix for the bug 33699 should be reverted
mysql-test/r/warnings.result:
Bug #39265: fix for the bug 33699 should be reverted
mysql-test/suite/ndb/r/ps_7ndb.result:
Bug #39265: fix for the bug 33699 should be reverted
mysql-test/suite/rpl/r/rpl_extraColmaster_innodb.result:
Bug #39265: fix for the bug 33699 should be reverted
mysql-test/suite/rpl/r/rpl_extraColmaster_myisam.result:
Bug #39265: fix for the bug 33699 should be reverted
mysql-test/suite/rpl/t/rpl_err_ignoredtable.test:
Bug #39265: fix for the bug 33699 should be reverted
mysql-test/t/auto_increment.test:
Bug #39265: fix for the bug 33699 should be reverted
mysql-test/t/csv_not_null.test:
Bug #39265: fix for the bug 33699 should be reverted
mysql-test/t/null.test:
Bug #39265: fix for the bug 33699 should be reverted
mysql-test/t/warnings.test:
Bug #39265: fix for the bug 33699 should be reverted
sql/sql_update.cc:
Bug #39265: fix for the bug 33699 should be reverted
- Added braces around expressions with &&, ||, & and |
- Added empty line before ; for empty while and for loops
- Added () around if with assignments
- Removed const before function returning simple type
Changed BUILD scripts to not build with NDB
BUILD/SETUP.sh:
By default, don't build ndb with --max in Maria tree.
NDB is not kept up to date anyway in 5.1
client/mysql.cc:
Added braces around && to get rid of compiler warnings
sql/event_db_repository.cc:
Added braces around && to get rid of compiler warnings
sql/events.cc:
Added braces around && to get rid of compiler warnings
sql/field.cc:
Added braces around && to get rid of compiler warnings
Fixed for loops
sql/field.h:
Added braces around & to get rid of compiler warnings
sql/field_conv.cc:
Added braces around && to get rid of compiler warnings
Fixed bug when copying between DATETIME fields and strict dates are used
Removed not needeed else
sql/gstream.cc:
Added braces around && to get rid of compiler warnings
sql/ha_ndbcluster.cc:
Added braces around && to get rid of compiler warnings
Added {} to get rid of compiler warnings
sql/handler.cc:
Added braces around && to get rid of compiler warnings
sql/item.cc:
Added braces around && to get rid of compiler warnings
sql/item_cmpfunc.cc:
Added braces around && to get rid of compiler warnings
Removed some not needed space
sql/item_func.cc:
Added braces around && to get rid of compiler warnings
sql/item_strfunc.cc:
Added braces around && to get rid of compiler warnings
sql/item_subselect.cc:
Added braces around && to get rid of compiler warnings
sql/item_sum.cc:
Added braces around && to get rid of compiler warnings
sql/item_timefunc.cc:
Added braces around && to get rid of compiler warnings
sql/item_xmlfunc.cc:
Added empty line before ; for empty while and for loops
sql/log.cc:
Added braces around && to get rid of compiler warnings
sql/log_event.cc:
Added braces around && to get rid of compiler warnings
Removed not needed else
sql/log_event_old.cc:
Added braces around && to get rid of compiler warnings
sql/opt_range.cc:
Added braces around && to get rid of compiler warnings
sql/opt_sum.cc:
Added braces around && to get rid of compiler warnings
sql/set_var.cc:
Added empty line before ; for empty while and for loops
Added () around if with assignments
sql/slave.cc:
Added braces around && to get rid of compiler warnings
Added empty line before ; for empty while and for loops
sql/spatial.h:
Added braces around && to get rid of compiler warnings
sql/sql_acl.cc:
Added braces around && to get rid of compiler warnings
sql/sql_analyse.cc:
Added empty line before ; for empty while and for loops
sql/sql_base.cc:
Added braces around && to get rid of compiler warnings
sql/sql_connect.cc:
Added braces around && to get rid of compiler warnings
sql/sql_db.cc:
Added braces around && to get rid of compiler warnings
sql/sql_delete.cc:
Added braces around && to get rid of compiler warnings
sql/sql_help.cc:
Added empty line before ; for empty while and for loops
sql/sql_insert.cc:
Added braces around && to get rid of compiler warnings
Added () around if with assignments
sql/sql_lex.cc:
Cast char array references to uchar; Fixed wrong array referencing when using characters > ASCII 128 in SQL statments
Added empty line before ; for empty while and for loops
Trivial indent fixes
Added braces around && to get rid of compiler warnings
sql/sql_load.cc:
Added braces around && to get rid of compiler warnings
sql/sql_parse.cc:
Added braces around && to get rid of compiler warnings
sql/sql_partition.cc:
Added braces around && to get rid of compiler warnings
sql/sql_plugin.cc:
Fixed bug in detecing if option variable should be readonly
Added empty line before ; for empty while and for loops
sql/sql_prepare.cc:
Added braces around && to get rid of compiler warnings
sql/sql_select.cc:
Added braces around && to get rid of compiler warnings
Added () around if with assignments
Added empty line before ; for empty while and for loops
sql/sql_show.cc:
Added braces around && to get rid of compiler warnings
sql/sql_table.cc:
Added braces around && to get rid of compiler warnings
sql/sql_trigger.cc:
Added braces around && to get rid of compiler warnings
sql/sql_update.cc:
Added braces around && to get rid of compiler warnings
sql/sql_yacc.yy:
Added braces around && to get rid of compiler warnings
sql/table.cc:
Added braces around && to get rid of compiler warnings
sql/table.h:
Added braces around && to get rid of compiler warnings
sql/time.cc:
Added braces around && to get rid of compiler warnings
sql/tztime.cc:
Added braces around && to get rid of compiler warnings
sql/uniques.cc:
Added braces around && to get rid of compiler warnings
storage/federated/ha_federated.cc:
Fixed bug in testing of variable to ha_info() (Not critical)
storage/heap/ha_heap.cc:
Added braces around && to get rid of compiler warnings
storage/maria/ha_maria.cc:
Fixed bug: Mark that maria_log_dir_path is readonly
Added braces around && to get rid of compiler warnings
storage/ndb/include/ndbapi/NdbEventOperation.hpp:
Removed const before function returning simple type
storage/ndb/include/ndbapi/NdbOperation.hpp:
Removed const before function returning simple type
storage/ndb/src/ndbapi/Ndb.cpp:
Added empty line before ; for empty while and for loops
storage/ndb/src/ndbapi/NdbEventOperation.cpp:
Removed const before function returning simple type
storage/ndb/src/ndbapi/NdbEventOperationImpl.cpp:
Removed const before function returning simple type
storage/ndb/src/ndbapi/NdbEventOperationImpl.hpp:
Removed const before function returning simple type
storage/ndb/src/ndbapi/NdbRecAttr.cpp:
Added empty line before ; for empty while and for loops
storage/ndb/src/ndbapi/TransporterFacade.hpp:
Added braces around && to get rid of compiler warnings
leads to an assertion failure
Any run-time error in stored function (like recursive function
call or update of table that is already updating by statement
which invoked this stored function etc.) that was used in some
expression of the single-table UPDATE statement caused an
assertion failure.
Multiple-table UPDATE (as well as INSERT and both single- and
multiple-table DELETE) are not affected.
mysql-test/r/update.result:
Added test case for bug #40745.
mysql-test/t/update.test:
Added test case for bug #40745.
sql/sql_update.cc:
Bug #40745: Error during WHERE clause calculation in UPDATE
leads to an assertion failure
The mysql_update function has been updated to take into account
the status of invoked stored functions before setting the status
of whole UPDATE query to OK.
enable uncacheable flag if we update a view with check option
and check option has a subselect, otherwise, the check option
can be evaluated after the subselect was freed as independent
(See full_local in JOIN::join_free())
mysql-test/r/subselect.result:
test result
mysql-test/t/subselect.test:
test case
sql/mysql_priv.h:
added UNCACHEABLE_CHECKOPTION flag
sql/sql_update.cc:
enable uncacheable flag if we update a view with check option
and check option has a subselect, otherwise, the check option
can be evaluated after the subselect was freed as independent
(See full_local in JOIN::join_free())
derived table cause crash
When a multi-UPDATE command fails to lock some table, and
subsequently succeeds, the tables need to be reopened if
they were altered. But the reopening procedure failed for
derived tables.
Extra cleanup has been added.
mysql-test/r/lock_multi.result:
Added test case for bug #38499.
mysql-test/t/lock_multi.test:
Added test case for bug #38499.
sql/sql_union.cc:
Bug#38499: flush tables and multitable table update with
derived table cause crash
Obsolete assertion has been removed.
sql/sql_update.cc:
Bug#38499: flush tables and multitable table update with
derived table cause crash
Extra cleanup for derived tables has been added:
1) unit.cleanup(),
2) unit->reinit_exec_mechanism().
``FLUSH TABLES WITH READ LOCK''
Concurrent execution of 1) multitable update with a
NATURAL/USING join and 2) a such query as "FLUSH TABLES
WITH READ LOCK" or "ALTER TABLE" of updating table led
to a server crash.
The mysql_multi_update_prepare() function call is optimized
to lock updating tables only, so it postpones locking to
the last, and if locking fails, it does cleanup of modified
syntax structures and repeats a query analysis. However,
that cleanup procedure was incomplete for NATURAL/USING join
syntax data: 1) some Field_item items pointed into freed
table structures, and 2) the TABLE_LIST::join_columns fields
was not reset.
Major change:
short-living Field *Natural_join_column::table_field has
been replaced with long-living Item*.
mysql-test/r/lock_multi.result:
Added test case for bug #38691.
mysql-test/t/lock_multi.test:
Added test case for bug #38691.
sql/item.cc:
Bug #38691: segfault/abort in ``UPDATE ...JOIN'' while
``FLUSH TABLES WITH READ LOCK''
The Item_field constructor has been modified to allocate
and copy original database/table/field names always (not
during PS preparation/1st execution only), because
an initialization of Item_field items with a pointer to
short-living Field structures is a common practice.
sql/sql_base.cc:
Bug #38691: segfault/abort in ``UPDATE ...JOIN'' while
``FLUSH TABLES WITH READ LOCK''
1) Type adjustment for Natural_join_column::table_field
(Field to Item_field);
2) The setup_natural_join_row_types function has been
updated to take into account new
first_natural_join_processing flag to skip unnecessary
reinitialization of Natural_join_column::join_columns
during table reopening after lock_tables() failure
(like the 'first_execution' flag for PS).
sql/sql_lex.cc:
Bug #38691: segfault/abort in ``UPDATE ...JOIN'' while
``FLUSH TABLES WITH READ LOCK''
Initialization of the new
st_select_lex::first_natural_join_processing flag has
been added.
sql/sql_lex.h:
Bug #38691: segfault/abort in ``UPDATE ...JOIN'' while
``FLUSH TABLES WITH READ LOCK''
The st_select_lex::first_natural_join_processing flag
has been added to skip unnecessary rebuilding of
NATURAL/USING JOIN structures during table reopening
after lock_tables failure.
sql/sql_update.cc:
Bug #38691: segfault/abort in ``UPDATE ...JOIN'' while
``FLUSH TABLES WITH READ LOCK''
Extra cleanup calls have been added to reset
Natural_join_column::table_field items.
sql/table.cc:
Bug #38691: segfault/abort in ``UPDATE ...JOIN'' while
``FLUSH TABLES WITH READ LOCK''
Type adjustment for Natural_join_column::table_field
(Field to Item_field).
sql/table.h:
Bug #38691: segfault/abort in ``UPDATE ...JOIN'' while
``FLUSH TABLES WITH READ LOCK''
Type of the Natural_join_column::table_field field has
been changed from Field that points into short-living
TABLE memory to long-living Item_field that can be
linked to (fixed) reopened table.
The problem is that when statement-based replication was enabled,
statements such as INSERT INTO .. SELECT FROM .. and CREATE TABLE
.. SELECT FROM need to grab a read lock on the source table that
does not permit concurrent inserts, which would in turn be denied
if the source table is a log table because log tables can't be
locked exclusively.
The solution is to not take such a lock when the source table is
a log table as it is unsafe to replicate log tables under statement
based replication. Furthermore, the read lock that does not permits
concurrent inserts is now only taken if statement-based replication
is enabled and if the source table is not a log table.
include/thr_lock.h:
Introduce yet another lock type that my get upgraded depending
on the binary log format. This is not a optimal solution but
can be easily improved later.
mysql-test/r/log_tables.result:
Add test case result for Bug#34306
mysql-test/suite/binlog/r/binlog_stm_row.result:
Add test case result for Bug#34306
mysql-test/suite/binlog/t/binlog_stm_row.test:
Add test case for Bug#34306
mysql-test/t/log_tables.test:
Add test case for Bug#34306
sql/lock.cc:
Assert that TL_READ_DEFAULT is not a real lock type.
sql/mysql_priv.h:
Export new function.
sql/mysqld.cc:
Remove using_update_log.
sql/sql_base.cc:
Introduce function that returns the appropriate read lock type
depending on how the statement is going to be replicated. It will
only take a TL_READ_NO_INSERT log if the binary is enabled and the
binary log format is statement-based and the table is not a log table.
sql/sql_parse.cc:
Remove using_update_log.
sql/sql_update.cc:
Use new function to choose read lock type.
sql/sql_yacc.yy:
The lock type is now decided at open_tables time. This old behavior was
actually misleading as the binary log format can be dynamically switched
and this would not change for statements that have already been parsed
when the binary log format is changed (ie: prepared statements).
- In QUICK_INDEX_MERGE_SELECT::read_keys_and_merge: when we got table->sort from Unique,
tell init_read_record() not to use rr_from_cache() because a) rowids are already sorted
and b) it might be that the the data is used by filesort(), which will need record rowids
(which rr_from_cache() cannot provide).
- Fully de-initialize the table->sort read in QUICK_INDEX_MERGE_SELECT::get_next(). This fixes BUG#35477.
(bk trigger: file as fix for BUG#35478).
sql/filesort.cc:
BUG#35478: sort_union() returns bad data when sort_buffer_size is hit
- make find_all_keys() use quick->get_next() instead of init_read_record(r)/r.read_record() calls
- added dbug printout
sql/mysql_priv.h:
BUG#35478: sort_union() returns bad data when sort_buffer_size is hit
- Added parameter to init_read_record
sql/opt_range.cc:
BUG#35478: sort_union() returns bad data when sort_buffer_size is hit
- In QUICK_INDEX_MERGE_SELECT::read_keys_and_merge: when we got table->sort from Unique,
tell init_read_record() not to use rr_from_cache() because a) rowids are already sorted
and b) it might be that the the data is used by filesort(), which will need record rowids
(which rr_from_cache() cannot provide).
- Fully de-initialize the table->sort read in QUICK_INDEX_MERGE_SELECT::get_next().
sql/records.cc:
BUG#35478: sort_union() returns bad data when sort_buffer_size is hit
- Added disable_rr_cache parameter to init_read_record
- Added comment
sql/sql_acl.cc:
BUG#35478: sort_union() returns bad data when sort_buffer_size is hit
- Added parameter to init_read_record
sql/sql_delete.cc:
BUG#35478: sort_union() returns bad data when sort_buffer_size is hit
- Added parameter to init_read_record
sql/sql_help.cc:
BUG#35478: sort_union() returns bad data when sort_buffer_size is hit
- Added parameter to init_read_record
sql/sql_select.cc:
BUG#35478: sort_union() returns bad data when sort_buffer_size is hit
- Added parameter to init_read_record
sql/sql_table.cc:
BUG#35478: sort_union() returns bad data when sort_buffer_size is hit
- Added parameter to init_read_record
sql/sql_udf.cc:
BUG#35478: sort_union() returns bad data when sort_buffer_size is hit
- Added parameter to init_read_record
sql/sql_update.cc:
BUG#35478: sort_union() returns bad data when sort_buffer_size is hit
- Added parameter to init_read_record
into bodhi.(none):/opt/local/work/mysql-5.1-27430
Makefile.am:
Auto merged
include/my_global.h:
Auto merged
mysql-test/include/mix1.inc:
Auto merged
sql/item.cc:
Auto merged
sql/my_decimal.h:
Auto merged
sql/mysqld.cc:
Auto merged
sql/set_var.cc:
Auto merged
sql/set_var.h:
Auto merged
sql/sp.cc:
Auto merged
sql/sp_head.cc:
Auto merged
sql/sql_base.cc:
Auto merged
sql/sql_class.cc:
Auto merged
sql/sql_class.h:
Auto merged
sql/sql_parse.cc:
Auto merged
sql/sql_table.cc:
Auto merged
sql/sql_update.cc:
Auto merged
sql/share/errmsg.txt:
Auto merged
sql/sql_yacc.yy:
Auto merged
libmysqld/CMakeLists.txt:
Manual merge.
libmysqld/lib_sql.cc:
Manual merge.
mysql-test/t/disabled.def:
Manual merge.
first row or fails with an error:
ERROR 1022 (23000): Can't write; duplicate key in table ''
The server uses intermediate temporary table to store updated
row data. The first column of this table contains rowid.
Current server implementation doesn't reset NULL flag of that
column even if the server fills a column with rowid.
To keep each rowid unique, there is an unique index.
An insertion into an unique index takes into account NULL
flag of key value and ignores real data if NULL flag is set.
So, insertion of actually different rowids may lead to two
kind of problems. Visible effect of each of these problems
depends on an initial engine type of temporary table:
1. If multiupdate initially creates temporary table as
a MyISAM table (a table contains blob columns, and the
create_tmp_table function assumes, that this table is
large), it inserts only one single row and updates
only rows with one corresponding rowid. Other rows are
silently ignored.
2. If multiupdate initially creates MEMORY temporary
table, fills it with data and reaches size limit for
MEMORY tables (max_heap_table_size), multiupdate
converts MEMORY table into MyISAM table and fails
with an error:
ERROR 1022 (23000): Can't write; duplicate key in table ''
Multiupdate has been fixed to update the NULL flag of
temporary table rowid columns.
mysql-test/r/multi_update_tiny_hash.result:
Added test case for bug#36676.
mysql-test/t/multi_update_tiny_hash-master.opt:
Added test case for bug#36676.
mysql-test/t/multi_update_tiny_hash.test:
Added test case for bug#36676.
sql/sql_update.cc:
Fixed bug#36676: multiupdate using LEFT JOIN updates only
first row or fails with an error:
ERROR 1022 (23000): Can't write; duplicate key in table ''
The multi_update::send_data method has been modified to reset null bits of
fields containing rowids.
into mysql.com:/home/my/mysql-new
BitKeeper/etc/ignore:
auto-union
BUILD/SETUP.sh:
Auto merged
CMakeLists.txt:
Auto merged
client/get_password.c:
Auto merged
client/mysqldump.c:
Auto merged
client/mysqltest.c:
Auto merged
cmd-line-utils/readline/bind.c:
Auto merged
cmd-line-utils/readline/display.c:
Auto merged
cmd-line-utils/readline/histexpand.c:
Auto merged
cmd-line-utils/readline/history.c:
Auto merged
cmd-line-utils/readline/readline.c:
Auto merged
cmd-line-utils/readline/text.c:
Auto merged
dbug/user.r:
Auto merged
extra/yassl/src/handshake.cpp:
Auto merged
include/config-win.h:
Auto merged
include/m_string.h:
Auto merged
include/my_global.h:
Auto merged
include/my_pthread.h:
Auto merged
include/mysql/plugin.h:
Auto merged
include/mysql_com.h:
Auto merged
include/thr_alarm.h:
Auto merged
libmysql/CMakeLists.txt:
Auto merged
libmysql/Makefile.shared:
Auto merged
libmysql/dll.c:
Auto merged
libmysql/get_password.c:
Auto merged
libmysql/libmysql.c:
Auto merged
libmysqld/Makefile.am:
Auto merged
mysql-test/lib/mtr_cases.pl:
Auto merged
mysql-test/mysql-test-run.pl:
Auto merged
mysql-test/r/alter_table.result:
Auto merged
mysql-test/r/change_user.result:
Auto merged
mysql-test/r/create.result:
Auto merged
mysql-test/r/innodb.result:
Auto merged
mysql-test/r/merge.result:
Auto merged
mysql-test/r/mix2_myisam.result:
Auto merged
mysql-test/r/mysqldump.result:
Auto merged
mysql-test/r/query_cache.result:
Auto merged
mysql-test/r/subselect.result:
Auto merged
mysql-test/valgrind.supp:
Auto merged
mysql-test/r/view.result:
Auto merged
mysql-test/suite/rpl/r/rpl_events.result:
Auto merged
mysql-test/suite/rpl/t/rpl_switch_stm_row_mixed.test:
Auto merged
mysql-test/t/create.test:
Auto merged
mysql-test/t/mysqldump.test:
Auto merged
mysql-test/t/query_cache.test:
Auto merged
mysql-test/t/subselect.test:
Auto merged
mysql-test/t/variables.test:
Auto merged
mysql-test/t/view.test:
Auto merged
mysys/mf_iocache.c:
Auto merged
mysys/mf_tempfile.c:
Auto merged
mysys/my_atomic.c:
Auto merged
mysys/my_bit.c:
Auto merged
mysys/my_bitmap.c:
Auto merged
mysys/my_compress.c:
Auto merged
mysys/my_create.c:
Auto merged
mysys/my_delete.c:
Auto merged
mysys/my_error.c:
Auto merged
mysys/my_init.c:
Auto merged
mysys/my_open.c:
Auto merged
mysys/my_realloc.c:
Auto merged
mysys/my_rename.c:
Auto merged
mysys/my_symlink.c:
Auto merged
mysys/my_sync.c:
Auto merged
mysys/my_thr_init.c:
Auto merged
mysys/thr_alarm.c:
Auto merged
mysys/thr_lock.c:
Auto merged
scripts/make_binary_distribution.sh:
Auto merged
server-tools/instance-manager/mysql_connection.cc:
Auto merged
sql/CMakeLists.txt:
Auto merged
sql/Makefile.am:
Auto merged
sql/events.cc:
Auto merged
sql/field.cc:
Auto merged
sql/field.h:
Auto merged
sql/filesort.cc:
Auto merged
sql/gen_lex_hash.cc:
Auto merged
sql/ha_ndbcluster.cc:
Auto merged
sql/ha_partition.h:
Auto merged
sql/handler.h:
Auto merged
sql/item.cc:
Auto merged
sql/item.h:
Auto merged
sql/item_cmpfunc.cc:
Auto merged
sql/item_func.cc:
Auto merged
sql/item_func.h:
Auto merged
sql/item_strfunc.cc:
Auto merged
sql/item_strfunc.h:
Auto merged
sql/item_subselect.cc:
Auto merged
sql/lock.cc:
Auto merged
sql/log.cc:
Auto merged
sql/log_event.cc:
Auto merged
sql/net_serv.cc:
Auto merged
sql/opt_range.cc:
Auto merged
sql/partition_info.cc:
Auto merged
sql/rpl_injector.cc:
Auto merged
sql/set_var.cc:
Auto merged
sql/slave.cc:
Auto merged
sql/slave.h:
Auto merged
sql/sp_head.cc:
Auto merged
sql/sql_acl.cc:
Auto merged
sql/sql_base.cc:
Auto merged
sql/sql_cache.cc:
Auto merged
sql/sql_class.h:
Auto merged
sql/sql_delete.cc:
Auto merged
sql/sql_load.cc:
Auto merged
sql/sql_plugin.cc:
Auto merged
sql/sql_prepare.cc:
Auto merged
sql/sql_repl.cc:
Auto merged
sql/sql_test.cc:
Auto merged
sql/sql_union.cc:
Auto merged
sql/sql_update.cc:
Auto merged
sql/sql_yacc.yy:
Auto merged
sql/table.cc:
Auto merged
sql/table.h:
Auto merged
sql/unireg.cc:
Auto merged
sql/share/errmsg.txt:
Auto merged
storage/csv/ha_tina.cc:
Auto merged
storage/csv/ha_tina.h:
Auto merged
storage/myisam/CMakeLists.txt:
Auto merged
storage/myisam/ft_boolean_search.c:
Auto merged
storage/myisam/ft_eval.c:
Auto merged
storage/myisam/ft_nlq_search.c:
Auto merged
storage/myisam/ft_parser.c:
Auto merged
storage/myisam/ft_static.c:
Auto merged
storage/myisam/ft_stopwords.c:
Auto merged
storage/myisam/ft_test1.c:
Auto merged
storage/myisam/ft_update.c:
Auto merged
storage/myisam/ha_myisam.cc:
Auto merged
storage/myisam/mi_check.c:
Auto merged
storage/myisam/mi_create.c:
Auto merged
storage/myisam/mi_delete.c:
Auto merged
storage/myisam/mi_delete_all.c:
Auto merged
storage/myisam/mi_dynrec.c:
Auto merged
storage/myisam/mi_key.c:
Auto merged
storage/myisam/mi_packrec.c:
Auto merged
storage/myisam/mi_range.c:
Auto merged
storage/myisam/mi_search.c:
Auto merged
storage/myisam/mi_test1.c:
Auto merged
storage/myisam/mi_test2.c:
Auto merged
storage/myisam/mi_test3.c:
Auto merged
storage/myisam/mi_unique.c:
Auto merged
storage/myisam/mi_write.c:
Auto merged
storage/myisam/myisamchk.c:
Auto merged
storage/myisam/myisamdef.h:
Auto merged
storage/myisam/myisampack.c:
Auto merged
storage/myisam/sort.c:
Auto merged
storage/myisam/sp_test.c:
Auto merged
support-files/mysql.spec.sh:
Auto merged
tests/mysql_client_test.c:
Auto merged
configure.in:
Manual merge
dbug/dbug.c:
Restore to original state in Maria tree
The big diff comes from a wrong pull from 5.0 -> 5.1 after backporting dbug to 5.0 from 5.1
include/Makefile.am:
Manual merge
include/my_atomic.h:
Ignore changes
include/my_base.h:
Manual merge
include/my_dbug.h:
Use orginal my_dbug.h from maria tree
include/my_handler.h:
Manual merge
include/my_sys.h:
Manual merge
include/myisam.h:
Manual merge
mysql-test/lib/mtr_report.pl:
Manual merge
mysql-test/r/myisam.result:
Manual merge
mysql-test/suite/binlog/r/binlog_unsafe.result:
Manual merge
mysql-test/suite/binlog/t/binlog_unsafe.test:
Manual merge
mysql-test/suite/rpl/r/rpl_row_flsh_tbls.result:
Manual merge
mysql-test/suite/rpl/r/rpl_switch_stm_row_mixed.result:
No changes
mysql-test/suite/rpl/t/rpl_row_flsh_tbls.test:
Manual merge
mysql-test/t/change_user.test:
Manual merge
mysql-test/t/disabled.def:
Manual merge
mysql-test/t/merge.test:
No changes
mysql-test/t/myisam.test:
Manual merge
mysys/Makefile.am:
Manual merge
mysys/array.c:
Manual merge
mysys/mf_keycache.c:
Manual merge
mysys/my_getsystime.c:
Manual merge
mysys/my_handler.c:
Manual merge
mysys/my_pread.c:
Manual merge
mysys/safemalloc.c:
Manual merge
sql/ha_partition.cc:
Manual merge
sql/handler.cc:
Manual merge
sql/lex.h:
Manual merge
sql/mysql_priv.h:
Manual merge
sql/mysqld.cc:
Manual merge
sql/set_var.h:
Manual merge
sql/sql_class.cc:
Manual merge
sql/sql_insert.cc:
Manual merge
sql/sql_parse.cc:
Manual merge
sql/sql_select.cc:
Manual merge
sql/sql_show.cc:
Manual merge
sql/sql_table.cc:
Manual merge
storage/myisam/mi_checksum.c:
No changes
storage/myisam/mi_extra.c:
Manual merge
storage/myisam/mi_open.c:
Manual merge
storage/myisammrg/ha_myisammrg.cc:
Manual merge
strings/strmake.c:
No changes
