- Cherrypick MBUG#688404 (PBXT crashes in debug/x64)
- Fix unixism (rm -rf) in the test suite_timeout
- Avoid plugin tests on Windows/embedded, plugins do not and will not work here
- Fixed some issues with partitions and connection_string, which also fixed lp:716890 "Pre- and post-recovery crash in Aria"
- Fixed wrong assert in Aria
Now need to merge with latest xtradb before pushing
sql/ha_partition.cc:
Ensure that m_ordered_rec_buffer is not freed before close.
sql/mysqld.cc:
Changed to use opt_stack_trace instead of opt_pstack.
Removed references to pstack
sql/partition_element.h:
Ensure that connect_string is initialized
storage/maria/ma_key_recover.c:
Fixed wrong assert
Test failed on a certain Linux platform in automated environment. It turns out that this platform has an old version of Perl modules DBI and DBD::mysql installed, as well as the OS itself being relatively old.
Allowing error code 11 to be returned from mysqlhotcopy on expected error seems harmless and will make the test pass also with older libraries.
There is one part of the test case that needs to break
and re-establish the circular topology. For this the test
stops the slave threads on a couple of servers and restarts
them with START SLAVE. However, no check is done on the
status of the IO or SQL threads before proceeding with
the subsequent commands.
Because rpl_only_running_threads is set to 1 this can lead
to silently not syncing all slave threads as expected,
ultimately resulting in unexpected results (and consequently
on a failing test run).
We fix this by replacing the START SLAVE instructions with
calls to --source include/start_slave.inc, which will wait
for the slave threads to be running (show 'Yes' in
Slave_IO|SQL_Running fields of SHOW SLAVE STATUS) before
proceeding. Additionally, we change rpl_sync.inc to make the
IO thread report that it is running when its running status
is any other than 'No'.
primary_key_no == 0".
Attempt to create InnoDB table with non-nullable column of
geometry type having an unique key with length 12 on it and
with some other candidate key led to server crash due to
assertion failure in both non-debug and debug builds.
The problem was that such a non-candidate key could have
been sorted as the first key in table/.FRM, before any legit
candidate keys. This resulted in assertion failure in InnoDB
engine which assumes that primary key should either be the
first key in table/.FRM or should not exist at all.
The reason behind such an incorrect sorting was an wrong
value of Create_field::key_length member for geometry field
(which was set to its pack_length == 12) which confused code
in mysql_prepare_create_table(), so it would skip marking
such key as a key with partial segments.
This patch fixes the problem by ensuring that this member
gets the same value of Create_field::key_length member as
for other blob fields (from which geometry field class is
inherited), and as result unique keys on geometry fields
are correctly marked as having partial segments.
mysql-test/include/gis_keys.inc:
Added test case for bug #58650 "Failing assertion:
primary_key_no == -1 || primary_key_no == 0".
mysql-test/r/gis.result:
Added test case for bug #58650 "Failing assertion:
primary_key_no == -1 || primary_key_no == 0".
mysql-test/suite/innodb/r/innodb_gis.result:
Added test case for bug #58650 "Failing assertion:
primary_key_no == -1 || primary_key_no == 0".
mysql-test/suite/innodb_plugin/r/innodb_gis.result:
Added test case for bug #58650 "Failing assertion:
primary_key_no == -1 || primary_key_no == 0".
sql/field.cc:
Changed Create_field::create_length_to_internal_length() to
correctly set Create_field::key_length member for geometry
fields. Similar to the blob types key_length for such fields
should be the same as length and not field's packed length
(which is always 12 for geometry).
As result of this change code handling table creation now
always correctly identifies btree/unique keys on geometry
fields as partial keys, so such keys can't be erroneously
treated as candidate keys and sorted in keys array in .FRM
before legit candidate keys.
This fixes bug #58650 "Failing assertion: primary_key_no ==
-1 || primary_key_no == 0" in which incorrect candidate key
sorting led to assertion failure in InnoDB code.
Write an additional warning message to the server log,
explaining why a sort operation is aborted.
The output in mysqld.err will look something like:
110127 15:07:54 [ERROR] mysqld: Sort aborted: Out of memory (Needed 24 bytes)
110127 15:07:54 [ERROR] mysqld: Out of sort memory, consider increasing server sort buffer size
110127 15:07:54 [ERROR] mysqld: Sort aborted: Out of sort memory, consider increasing server sort buffer size
110127 15:07:54 [ERROR] mysqld: Sort aborted: Incorrect number of arguments for FUNCTION test.f1; expected 0, got 1
If --log-warn=2 is enabled, we output information about host/user/query as well.
include/my_sys.h:
Update comment for ME_NOREFRESH
mysql-test/include/mtr_warnings.sql:
Remove global filtering of "Out of sort memory", let each individual test set it instead.
mysql-test/r/filesort_debug.result:
New test case.
mysql-test/r/order_by.result:
Ignore "Out of memory" for this test.
mysql-test/t/filesort_debug.test:
New test case.
mysql-test/t/order_by.test:
Ignore "Out of memory" for this test.
sql/filesort.cc:
Output an explanation using the error message from the THD Diagnostics_area.
sql/protocol.cc:
Do not DBUG_RETURN(function_call_with DBUG_RETURN)
as it messes up the call stack in the debug output.
sql/share/errmsg-utf8.txt:
Change error message for "Out of sort memory"
sql/unireg.h:
Remove unused/confusing ERRMAPP macro.
Third updated patch - this version also includes copyright notice in added Perl script.
This patch implements a check for such modules at runtime. If modules are not found or unable to load, the test is skipped with
the following message:
[ skipped ] Test needs Perl modules DBI and DBD::mysql
Checks are done via a helper Perl script which looks for the module in a runtime environment that is as similar to that of the
mysqlhotcopy script as possible (thus not intended for Windows environments at this time).
The helper script tells mysql-test about the result by writing information to a temporary file that is later read by mysql-test.
See comments in added files (have_dbi_dbd-mysql.inc and checkDBI_DBD-mysql.pl) for details.
The patch also removes the mysqlhotcopy tests from the list of disabled tests.
In SBR, if a statement does not fail, it is always written to the binary
log, regardless if rows are changed or not. If there is a failure, a
statement is only written to the binary log if a non-transactional (.e.g.
MyIsam) engine is updated.
INSERT ON DUPLICATE KEY UPDATE and INSERT IGNORE were not following the
rule above and were not written to the binary log, if then engine was
Innodb.
mysql-test/extra/rpl_tests/rpl_insert_duplicate.test:
Added test case.
mysql-test/extra/rpl_tests/rpl_insert_ignore.test:
Updated test case.
mysql-test/include/commit.inc:
Updated test case as the calls to the binary log have changed
for INSERT ON DUPLICATE and INSERT IGNORE.
mysql-test/r/commit_1innodb.result:
Updated result file.
mysql-test/suite/rpl/r/rpl_insert_duplicate.result:
Added test case.
mysql-test/suite/rpl/r/rpl_insert_ignore.result:
Updated result file.
mysql-test/suite/rpl/t/rpl_insert_duplicate.test:
Added test case.
mysql-test/suite/rpl/t/rpl_insert_ignore.test:
Improved test case.
rpl_packet got a timeout failure sporadically on PB when stopping
slave. The real reason of this bug is that STOP SLAVE stopped
IO thread first and then stopped SQL thread. It was
possible that IO thread stopped after replicating part of a
transaction which SQL thread was executing. SQL thread would
be hung if the transaction could not be rolled back safely.
After this patch, STOP SLAVE will stop SQL thread first and then stop IO
thread, which guarantees that IO thread will fetch the reset of the
events of the transaction that SQL thread is executing, so that SQL
thread can finish the transaction if it cannot be rolled back safely.
Added below auxiliary files to make the test code neater.
restart_slave_sql.inc
rpl_connection_master.inc
rpl_connection_slave.inc
rpl_connection_slave1.inc
Undoing the patch, it complicates the code but is not the solution
I do not beleive newline mismatch could be the cause of this failure
First, I cannot see how this could be a problem, mtr ignores the newline
when reading the expect file, and the file is written and read on Windows.
Second, if this really was the problem it should have been deterministic:
either the newline is correctly interepreted or it is not.
Backported the fix to 5.1.
Problem: the auxiliary test files rpl_start_server.inc and rpl_stop_server.inc
write a file that is later read by mtr. The bug was that the file was written
with platform-dependent newline terminators, i.e., \r\n on windows, whereas mtr
only understands \n.
Fix: write the file so that it uses \n on all platforms.
mysql-test/include/rpl_start_server.inc:
Force test to use \n instead of platform-dependent newline terminator.
mysql-test/include/rpl_stop_server.inc:
Force test to use \n instead of platform-dependent newline terminator.
3150 Olav Sandstaa 2010-05-07
Test cases for the following "ICP for InnoDB" bugs:
Bug#40992 InnoDB: Crash when engine_condition_pushdown is on
Bug#35080 Innodb crash at mem_block_get_len line 72
Bug#41996 multi-table delete crashes server (InnoDB table)
Bug#43448 Server crashes on multi table delete with Innodb
All these bugs are duplicates of either one or both of Bug 43360 or 36981.
(backporting of olav@sun.com-20100226091930-qxvakxmcp6463t5w)
The test started failing on the same day patch for BUG 49978 was
pushed. BUG 49978 changed part of the replication testing
infrastructure in mysql-test-run. This caused the test to fail
sporadically with result differences on relay log file
names. When the test fails the relay-log filenames are shifted by
one, eg:
-show relaylog events in 'slave-relay-bin.000002' from <binlog_start>;
+show relaylog events in 'slave-relay-bin.000003' from <binlog_start>;
The problem was caused by a bad cleanup when using the include
files:
- include/setup_fake_relay_log.inc
- include/cleanup_fake_relay_log.inc
Which would leave a spurious relay-log file around (not listed in
slave-relay-bin.index), causing the server to shift the name of
the relay logs by one, even if cleaning up with RESET SLAVE.
We fix this by removing the relay-log file when it is not needed
anymore, ie at setup time and after recreating the fake relay-log
index.
Additionally, to make the affected test more resilient, we
deployed a call to rpl_reset.inc (which resets both master and
slave, including log files) before actually running the test
case.
Finally, appart from the reported bug, we also fix: (a) an
unrelated issue with the failing test itself - in some cases, the
test was not setting the log file name to use when it should;
(b) one typo.
mysql-test/extra/rpl_tests/rpl_show_relaylog_events.inc:
Added call to rpl_reset.inc.
Deployed missing instructions to get the binlog file name
before including show_relaylog/binlog_events.inc
Problem: DATE_ADD() is a hybrid function and can return
DATE, DATETIME or VARCHAR data type depending on arguments.
In case of VARCHAR data type, DATE_ADD() reported "binary" character set,
which was wrong.
Fix: make DATE_ADD() return @character_set_connection in VARCHAR context.
@ mysql-test/include/ctype_numconv.inc
Adding tests
@ mysql-test/r/ctype_binary.result
Adding tests
@ mysql-test/r/ctype_cp1251.result
Adding tests
@ mysql-test/r/ctype_latin1.result
Adding tests
@ mysql-test/r/ctype_ucs.result
Adding tests
@ mysql-test/r/ctype_utf8.result
Adding tests
@ sql/item_strfunc.cc
- Moving code from Item_str_ascii_func::val_str() to
Item_str_func::val_str_from_val_str_ascii(), as
this code needs to be shared by Item_date_add_interval.
- Adding str2 parameter to be used as a buffer, instead of
using private ascii_buf member.
@ sql/item_strfunc.h
- Moving code from Item_str_ascii_func::val_str() to
Item_str_func::val_str_from_val_str_ascii()
- Removing "String *val_str_convert_from_ascii(String *str, String *ascii_buf)"
prototype as it was neither used nor declared.
@ sql/item_timefunc.h
- Overwriting parent's charset_for_protocol() method,
becase we need to behave differenlty in VARCHAR and DATE/DATETYPE context.
- Adding ascii_buf for conversion.
- Adding val_str_ascii() prototype.
- Adding val_str() which uses newly added
Item_str_func::val_str_from_val_str_ascii(),
passing ascii_buf as a conversion buffer.
Put descriptions of plugins into a separate file read by MTR
MTR itself has generalised code to read this and set env. variables
Removed the *SO variables, updated some tests accordingly
New commit: added optional list of plugin names for _LOAD variable
Also made changes for the new AUTH_* plugins
- Added test case for Aria
- Tested HANDLER with HEAP (changes to HEAP code will be pushed in 5.3)
- Moved all HANDLER test to suite/handler.
mysql-test/Makefile.am:
Added suite/handler
mysql-test/mysql-test-run.pl:
Added suite/handler
mysql-test/r/lock_multi.result:
Remove test that is already in handler test suite
mysql-test/suite/handler/aria.result:
Test for HANDLER with Aria storage engine
mysql-test/suite/handler/aria.test:
Test for HANDLER with Aria storage engine
mysql-test/suite/handler/handler.inc:
Extended the general handler test
Moved interface testing to 'interface.test'
mysql-test/suite/handler/init.inc:
Common init for handler tests.
mysql-test/suite/handler/innodb.result:
New results
mysql-test/suite/handler/innodb.test:
Update to use new include files
mysql-test/suite/handler/interface.result:
Test of HANDLER interface (not storage engine dependent parts)
mysql-test/suite/handler/interface.test:
Test of HANDLER interface (not storage engine dependent parts)
mysql-test/suite/handler/myisam.result:
New results
mysql-test/suite/handler/myisam.test:
Update to use new include files
mysql-test/t/lock_multi.test:
Remove test that is already in handler test suite
mysys/tree.c:
Added missing handling of read previous (showed up in HEAP testing)
sql/handler.cc:
Don't marka 'HA_ERR_RECORD_CHANGED' as fatal (can be used with HANDLER READ, especially with MEMORY ENGINE)
sql/handler.h:
Added prototype for can_continue_handler_scan()
sql/sql_handler.cc:
Re-initialize search if we switch from key to table search.
Check if handler can continue searching between calls (via can_continue_handler_scan())
Don't write common not fatal errors to log
storage/maria/ma_extra.c:
Don't set index 0 as default. This forces call to ma_check_index() to set up index variables.
storage/maria/ma_ft_boolean_search.c:
Ensure that info->last_key.keyinfo is set
storage/maria/ma_open.c:
Don't set index 0 as default. This forces call to ma_check_index() to set up index variables.
storage/maria/ma_rkey.c:
Trivial optimization
storage/maria/ma_rnext.c:
Added missing code from mi_rnext.c to ensure that handler next/prev works.
storage/maria/ma_rsame.c:
Simple optimizations
storage/maria/ma_search.c:
Initialize info->last_key once and for all when we change keys.
storage/maria/ma_unique.c:
Ensure that info->last_key.keyinfo is up to date.
