The old code collected a list of THD's, locked the THD's from getting
deleted by locking two mutex and then later in a separate loop
sent a kill signal to each THD.
The problem with this approach is that, as THD's can be reused,
the second time the THD is killed, the mutex can be taken in
different order, which signals failures in safe_mutex.
Fixed by sending the kill signal directly and not collect the THD's
in a list to be signaled later. This is the same approach we are using
in kill_zombie_dump_threads().
Other things:
- Reset safe_mutex_t->locked_mutex when freed (Safety fix)
rpl_semi_sync_slave_enabled_consistent.test and the first part of
the commit message comes from Brandon Nesterenko.
A test to show how to induce the "Read semi-sync reply magic number
error" message on a primary. In short, if semi-sync is turned on
during the hand-shake process between a primary and replica, but
later a user negates the rpl_semi_sync_slave_enabled variable while
the replica's IO thread is running; if the io thread exits, the
replica can skip a necessary call to kill_connection() in
repl_semisync_slave.slave_stop() due to its reliance on a global
variable. Then, the replica will send a COM_QUIT packet to the
primary on an active semi-sync connection, causing the magic number
error.
The test in this patch exits the IO thread by forcing an error;
though note a call to STOP SLAVE could also do this, but it ends up
needing more synchronization. That is, the STOP SLAVE command also
tries to kill the VIO of the replica, which makes a race with the IO
thread to try and send the COM_QUIT before this happens (which would
need more debug_sync to get around). See THD::awake_no_mutex for
details as to the killing of the replica’s vio.
Notes:
- The MariaDB documentation does not make it clear that when one
enables semi-sync replication it does not matter if one enables
it first in the master or slave. Any order works.
Changes done:
- The rpl_semi_sync_slave_enabled variable is now a default value for
when semisync is started. The variable does not anymore affect
semisync if it is already running. This fixes the original reported
bug. Internally we now use repl_semisync_slave.get_slave_enabled()
instead of rpl_semi_sync_slave_enabled. To check if semisync is
active on should check the @@rpl_semi_sync_slave_status variable (as
before).
- The semisync protocol conflicts in the way that the original
MySQL/MariaDB client-server protocol was designed (client-server
send and reply packets are strictly ordered and includes a packet
number to allow one to check if a packet is lost). When using
semi-sync the master and slave can send packets at 'any time', so
packet numbering does not work. The 'solution' has been that each
communication starts with packet number 1, but in some cases there
is still a chance that the packet number check can fail. Fixed by
adding a flag (pkt_nr_can_be_reset) in the NET struct that one can
use to signal that packet number checking should not be done. This
is flag is set when semi-sync is used.
- Added Master_info::semi_sync_reply_enabled to allow one to configure
some slaves with semisync and other other slaves without semisync.
Removed global variable semi_sync_need_reply that would not work
with multi-master.
- Repl_semi_sync_master::report_reply_packet() can now recognize
the COM_QUIT packet from semisync slave and not give a
"Read semi-sync reply magic number error" error for this case.
The slave will be removed from the Ack listener.
- On Windows, don't stop semisync Ack listener just because one
slave connection is using socket_id > FD_SETSIZE.
- Removed busy loop in Ack_receiver::run() by using
"Self-pipe trick" to signal new slave and stop Ack_receiver.
- Changed some Repl_semi_sync_slave functions that always returns 0
from int to void.
- Added Repl_semi_sync_slave::slave_reconnect().
- Removed dummy_function Repl_semi_sync_slave::reset_slave().
- Removed some duplicate semisync notes from the error log.
- Add test of "if (get_slave_enabled() && semi_sync_need_reply)"
before calling Repl_semi_sync_slave::slave_reply().
(Speeds up the code as we can skip all initializations).
- If epl_semisync_slave.slave_reply() fails, we disable semisync
for that connection.
- We do not call semisync.switch_off() if there are no active slaves.
Instead we check in Repl_semi_sync_master::commit_trx() if there are
no active threads. This simplices the code.
- Changed assert() to DBUG_ASSERT() to ensure that the DBUG log is
flushed in case of asserts.
- Removed the internal rpl_semi_sync_slave_status as it is not needed
anymore. The @@rpl_semi_sync_slave_status status variable is now
mapped to rpl_semi_sync_enabled.
- Removed rpl_semi_sync_slave_enabled as it is not needed anymore.
Repl_semi_sync_slave::get_slave_enabled() contains the active status.
- Added checking that we do not add a slave twice with
Ack_receiver::add_slave(). This could happen with old code.
- Removed Repl_semi_sync_master::check_and_switch() as it is not
needed anymore.
- Ensure that when we call Ack_receiver::remove_slave() that the slave
is removed from the listener before function returns.
- Call listener.listen_on_sockets() outside of mutex for better
performance and less contested mutex.
- Ensure that listening is ignoring newly added slaves when checking for
responses.
- Fixed the master ack_receiver listener is not killed if there are no
connected slaves (and thus stop semisync handling of future
connections). This could happen if all slaves sockets where would be
marked as unreliable.
- Added unlink() to base_ilist_iterator and remove() to
I_List_iterator. This enables us to remove 'dead' slaves in
Ack_recever::run().
- kill_zombie_dump_threads() now does killing of dump threads properly.
- It can now kill several threads (should be impossible but could
happen if IO slaves reconnects very fast).
- We now wait until the dump thread is done before starting the
dump.
- Added an error if kill_zombie_dump_threads() fails.
- Set thd->variables.server_id before calling
kill_zombie_dump_threads(). This simplies the code.
- Added a lot of comments both in code and tests.
- Removed DBUG_EVALUATE_IF "failed_slave_start" as it is not used.
Test changes:
- rpl.rpl_session_var2 added which runs rpl.rpl_session_var test with
semisync enabled.
- Some timings changed slight with startup of slave which caused
rpl_binlog_dump_slave_gtid_state_info.text to fail as it checked the
error log file before the slave had started properly. Fixed by
adding wait_for_pattern_in_file.inc that allows waiting for the
pattern to appear in the log file.
- Tests have been updated so that we first set
rpl_semi_sync_master_enabled on the master and then set
rpl_semi_sync_slave_enabled on the slaves (this is according to how
the MariaDB documentation document how to setup semi-sync).
- Error text "Master server does not have semi-sync enabled" has been
replaced with "Master server does not support semi-sync" for the
case when the master supports semi-sync but semi-sync is not
enabled.
Other things:
- Some trivial cleanups in Repl_semi_sync_master::update_sync_header().
- We should in 11.3 changed the default value for
rpl-semi-sync-master-wait-no-slave from TRUE to FALSE as the TRUE
does not make much sense as default. The main difference with using
FALSE is that we do not wait for semisync Ack if there are no slave
threads. In the case of TRUE we wait once, which did not bring any
notable benefits except slower startup of master configured for
using semisync.
Co-author: Brandon Nesterenko <brandon.nesterenko@mariadb.com>
This solves the problem reported in MDEV-32960 where a new
slave may not be registered in time and the master disables
semi sync because of that.
Other things:
- Added DBUG_EXECUTE_IF("print_allocated_thread_memory") at end of query
to easier find not freed memory allocated by THD
- Removed free_root() from plugin_init() that did nothing.
- Allow database level access via `LOCK TABLES` to execute statement
`BACKUP [un]LOCK <object>`
- `BACKUP UNLOCK` works only with `RELOAD` privilege.
In case there is `LOCK TABLES` privilege without `RELOAD` privilege,
we check if backup lock is taken before.
If it is not we raise an error of missing `RELOAD` privilege.
- We had to remove any error/warnings from calling functions because
`thd->get_stmt_da()->m_status` will be set to error and will break
`my_ok()`.
- Added missing test coverage of `RELOAD` privilege to `main.grant.test`
Reviewer: <daniel@mariadb.org>
In some cases "SHOW PROCESSLIST" could show "Reset for next command"
as State, even if the previous query had finished properly.
Fixed by clearing State after end of command and also setting the State
for the "Connect" command.
Other things:
- Changed usage of 'thd->set_command(COM_SLEEP)' to
'thd->mark_connection_idle()'.
- Changed thread_state_info() to return "" instead of NULL. This is
just a safety measurement and in line with the logic of the
rest of the function.
standard table KEY_COLUMN_USAGE should only show keys where
a user has some privileges on every column of the key
standard table TABLE_CONSTRAINTS should show tables where
a user has any non-SELECT privilege on the table or on any column
of the table
standard table REFERENTIAL_CONSTRAINTS is defined in terms of
TABLE_CONSTRAINTS, so the same rule applies. If the user
has no rights to see the REFERENCED_TABLE_NAME value, it should be NULL
SHOW INDEX (and STATISTICS table) is non-standard, but it seems
reasonable to use the same logic as for KEY_COLUMN_USAGE.
The MDEV-29693 conflict resolution is from Monty, as well as is
a bug fix where ANALYZE TABLE wrongly built histograms for
single-column PRIMARY KEY.
Also includes a fix for safe_malloc error reporting.
Other things:
- Copied main.log_slow from 10.4 to avoid mtr issue
Disabled test:
- spider/bugfix.mdev_27239 because we started to get
+Error 1429 Unable to connect to foreign data source: localhost
-Error 1158 Got an error reading communication packets
- main.delayed
- Bug#54332 Deadlock with two connections doing LOCK TABLE+INSERT DELAYED
This part is disabled for now as it fails randomly with different
warnings/errors (no corruption).
Before this patch, the code in Item_field::print() used
this convention (described in sql_explain.h:ExplainDataStructureLifetime):
- By default, the table that Item_field refers to is accessible.
- ANALYZE and SHOW {EXPLAIN|ANALYZE} may print Items after some
temporary tables have been dropped. They use
QT_DONT_ACCESS_TMP_TABLES flag. When it is ON, Item_field::print
will not access the table it refers to, if it is a temp.table
The bug was that EXPLAIN statement also may compute subqueries (depending
on subquery context and @@expensive_subquery_limit setting). After the
computation, the subquery calls JOIN::cleanup(true) which drops some of
its temporary tables. Calling Item_field::print() that refer to such table
will cause an access to free'd memory.
In this patch, we take into account that query optimization can compute
a subquery and discard its temporary tables. Item_field::print() now
assumes that any temporary table might have already been dropped.
This means QT_DONT_ACCESS_TMP_TABLES flag is not needed - we imply it is
always present.
But we also make one exception: derived tables are not freed in
JOIN::cleanup() call. They are freed later in close_thread_tables(),
at the same time when regular tables are closed.
Because of that, Item_field::print may assume that temp.tables
representing derived tables are available.
Initial patch by: Rex Jonston
Reviewed by: Monty <monty@mariadb.org>
The pointer was used deep in the call path.
Resolve this by setting the pointer to NULL at the end of
the function.
Tested with gcc-13.3.1 (fc38)
The warning disable 38fe266ea953 can be reverted in 10.6+ on merge.
The parser works as follows:
The rule expr_lex returns a pointer to a newly created sp_expr_lex
instance which is not linked to any MariaDB structures yet - it is
pointed only from a Bison stack variable. The sp_expr_lex instance
gets linked to other structures (such as sp_instr_jump_if_not) later,
after scanning some following grammar.
Problem before the fix:
If a parse error happened immediately after expr_lex (before it got linked),
the created sp_expr_lex value got lost causing a memory leak.
Fix:
- Using Bison's "destructor" directive to free the results of expr_lex
on parse/oom errors.
- Moving the call for LEX::cleanup_lex_after_parse_error() from
MYSQL_YYABORT and yyerror inside parse_sql().
This is needed because Bison calls destructors after yyerror(),
while it's important to delete the sp_expr_lex instance before
LEX::cleanup_lex_after_parse_error().
The latter frees the memory root containing the sp_expr_lex instance.
After this change the code block are executed in the following order:
- yyerror() -- now only raises the error to DA (no cleanup done any more)
- %destructor { delete $$; } <expr_lex> -- destructs the sp_expr_lex instance
- LEX::cleanup_lex_after_parse_error() -- frees the memory root containing
the sp_expr_lex instance
- Removing the "delete sublex" related code from restore_lex():
- restore_lex() is called in most cases on success, when delete is not needed.
- There is one place when restore_lex() is called on error:
In sp_create_assignment_instr(). But in this case LEX::sp_lex_in_use
is true anyway.
The patch adds a new DBUG_ASSERT(lex->sp_lex_in_use) to guard this.
This commit contains a merge from 10.5-MDEV-29293-squash
into 10.6.
Although the bug MDEV-29293 was not reproducible with 10.6,
the fix contains several improvements for wsrep KILL query and
BF abort handling, and addresses the following issues:
* MDEV-30307 KILL command issued inside a transaction is
problematic for galera replication:
This commit will remove KILL TOI replication, so Galera side
transaction context is not lost during KILL.
* MDEV-21075 KILL QUERY maintains nodes data consistency but
breaks GTID sequence: This is fixed as well as KILL does not
use TOI, and thus does not change GTID state.
* MDEV-30372 Assertion in wsrep-lib state: This was caused by
BF abort or KILL when local transaction was in the middle
of group commit. This commit disables THD::killed handling
during commit, so the problem is avoided.
* MDEV-30963 Assertion failure !lock.was_chosen_as_deadlock_victim
in trx0trx.h:1065: The assertion happened when the victim was
BF aborted via MDL while it was committing. This commit changes
MDL BF aborts so that transactions which are committing cannot
be BF aborted via MDL. The RQG grammar attached in the issue
could not reproduce the crash anymore.
Original commit message from 10.5 fix:
MDEV-29293 MariaDB stuck on starting commit state
The problem seems to be a deadlock between KILL command execution
and BF abort issued by an applier, where:
* KILL has locked victim's LOCK_thd_kill and LOCK_thd_data.
* Applier has innodb side global lock mutex and victim trx mutex.
* KILL is calling innobase_kill_query, and is blocked by innodb
global lock mutex.
* Applier is in wsrep_innobase_kill_one_trx and is blocked by
victim's LOCK_thd_kill.
The fix in this commit removes the TOI replication of KILL command
and makes KILL execution less intrusive operation. Aborting the
victim happens now by using awake_no_mutex() and ha_abort_transaction().
If the KILL happens when the transaction is committing, the
KILL operation is postponed to happen after the statement
has completed in order to avoid KILL to interrupt commit
processing.
Notable changes in this commit:
* wsrep client connections's error state may remain sticky after
client connection is closed. This error message will then pop
up for the next client session issuing first SQL statement.
This problem raised with test galera.galera_bf_kill.
The fix is to reset wsrep client error state, before a THD is
reused for next connetion.
* Release THD locks in wsrep_abort_transaction when locking
innodb mutexes. This guarantees same locking order as with applier
BF aborting.
* BF abort from MDL was changed to do BF abort on server/wsrep-lib
side first, and only then do the BF abort on InnoDB side. This
removes the need to call back from InnoDB for BF aborts which originate
from MDL and simplifies the locking.
* Removed wsrep_thd_set_wsrep_aborter() from service_wsrep.h.
The manipulation of the wsrep_aborter can be done solely on
server side. Moreover, it is now debug only variable and
could be excluded from optimized builds.
* Remove LOCK_thd_kill from wsrep_thd_LOCK/UNLOCK to allow more
fine grained locking for SR BF abort which may require locking
of victim LOCK_thd_kill. Added explicit call for
wsrep_thd_kill_LOCK/UNLOCK where appropriate.
* Wsrep-lib was updated to version which allows external
locking for BF abort calls.
Changes to MTR tests:
* Disable galera_bf_abort_group_commit. This test is going to
be removed (MDEV-30855).
* Make galera_var_retry_autocommit result more readable by echoing
cases and expectations into result. Only one expected result for
reap to verify that server returns expected status for query.
* Record galera_gcache_recover_manytrx as result file was incomplete.
Trivial change.
* Make galera_create_table_as_select more deterministic:
Wait until CTAS execution has reached MDL wait for multi-master
conflict case. Expected error from multi-master conflict is
ER_QUERY_INTERRUPTED. This is because CTAS does not yet have open
wsrep transaction when it is waiting for MDL, query gets interrupted
instead of BF aborted. This should be addressed in separate task.
* A new test galera_bf_abort_registering to check that registering trx gets
BF aborted through MDL.
* A new test galera_kill_group_commit to verify correct behavior
when KILL is executed while the transaction is committing.
Co-authored-by: Seppo Jaakola <seppo.jaakola@iki.fi>
Co-authored-by: Jan Lindström <jan.lindstrom@galeracluster.com>
Signed-off-by: Julius Goryavsky <julius.goryavsky@mariadb.com>
The problem seems to be a deadlock between KILL command execution
and BF abort issued by an applier, where:
* KILL has locked victim's LOCK_thd_kill and LOCK_thd_data.
* Applier has innodb side global lock mutex and victim trx mutex.
* KILL is calling innobase_kill_query, and is blocked by innodb
global lock mutex.
* Applier is in wsrep_innobase_kill_one_trx and is blocked by
victim's LOCK_thd_kill.
The fix in this commit removes the TOI replication of KILL command
and makes KILL execution less intrusive operation. Aborting the
victim happens now by using awake_no_mutex() and ha_abort_transaction().
If the KILL happens when the transaction is committing, the
KILL operation is postponed to happen after the statement
has completed in order to avoid KILL to interrupt commit
processing.
Notable changes in this commit:
* wsrep client connections's error state may remain sticky after
client connection is closed. This error message will then pop
up for the next client session issuing first SQL statement.
This problem raised with test galera.galera_bf_kill.
The fix is to reset wsrep client error state, before a THD is
reused for next connetion.
* Release THD locks in wsrep_abort_transaction when locking
innodb mutexes. This guarantees same locking order as with applier
BF aborting.
* BF abort from MDL was changed to do BF abort on server/wsrep-lib
side first, and only then do the BF abort on InnoDB side. This
removes the need to call back from InnoDB for BF aborts which originate
from MDL and simplifies the locking.
* Removed wsrep_thd_set_wsrep_aborter() from service_wsrep.h.
The manipulation of the wsrep_aborter can be done solely on
server side. Moreover, it is now debug only variable and
could be excluded from optimized builds.
* Remove LOCK_thd_kill from wsrep_thd_LOCK/UNLOCK to allow more
fine grained locking for SR BF abort which may require locking
of victim LOCK_thd_kill. Added explicit call for
wsrep_thd_kill_LOCK/UNLOCK where appropriate.
* Wsrep-lib was updated to version which allows external
locking for BF abort calls.
Changes to MTR tests:
* Disable galera_bf_abort_group_commit. This test is going to
be removed (MDEV-30855).
* Record galera_gcache_recover_manytrx as result file was incomplete.
Trivial change.
* Make galera_create_table_as_select more deterministic:
Wait until CTAS execution has reached MDL wait for multi-master
conflict case. Expected error from multi-master conflict is
ER_QUERY_INTERRUPTED. This is because CTAS does not yet have open
wsrep transaction when it is waiting for MDL, query gets interrupted
instead of BF aborted. This should be addressed in separate task.
* A new test galera_kill_group_commit to verify correct behavior
when KILL is executed while the transaction is committing.
Co-authored-by: Seppo Jaakola <seppo.jaakola@iki.fi>
Co-authored-by: Jan Lindström <jan.lindstrom@galeracluster.com>
Signed-off-by: Julius Goryavsky <julius.goryavsky@mariadb.com>
This is a backport from 10.5.
The problem seems to be a deadlock between KILL command execution
and BF abort issued by an applier, where:
* KILL has locked victim's LOCK_thd_kill and LOCK_thd_data.
* Applier has innodb side global lock mutex and victim trx mutex.
* KILL is calling innobase_kill_query, and is blocked by innodb
global lock mutex.
* Applier is in wsrep_innobase_kill_one_trx and is blocked by
victim's LOCK_thd_kill.
The fix in this commit removes the TOI replication of KILL command
and makes KILL execution less intrusive operation. Aborting the
victim happens now by using awake_no_mutex() and ha_abort_transaction().
If the KILL happens when the transaction is committing, the
KILL operation is postponed to happen after the statement
has completed in order to avoid KILL to interrupt commit
processing.
Notable changes in this commit:
* wsrep client connections's error state may remain sticky after
client connection is closed. This error message will then pop
up for the next client session issuing first SQL statement.
This problem raised with test galera.galera_bf_kill.
The fix is to reset wsrep client error state, before a THD is
reused for next connetion.
* Release THD locks in wsrep_abort_transaction when locking
innodb mutexes. This guarantees same locking order as with applier
BF aborting.
* BF abort from MDL was changed to do BF abort on server/wsrep-lib
side first, and only then do the BF abort on InnoDB side. This
removes the need to call back from InnoDB for BF aborts which originate
from MDL and simplifies the locking.
* Removed wsrep_thd_set_wsrep_aborter() from service_wsrep.h.
The manipulation of the wsrep_aborter can be done solely on
server side. Moreover, it is now debug only variable and
could be excluded from optimized builds.
* Remove LOCK_thd_kill from wsrep_thd_LOCK/UNLOCK to allow more
fine grained locking for SR BF abort which may require locking
of victim LOCK_thd_kill. Added explicit call for
wsrep_thd_kill_LOCK/UNLOCK where appropriate.
* Wsrep-lib was updated to version which allows external
locking for BF abort calls.
Changes to MTR tests:
* Disable galera_bf_abort_group_commit. This test is going to
be removed (MDEV-30855).
* Record galera_gcache_recover_manytrx as result file was incomplete.
Trivial change.
* Make galera_create_table_as_select more deterministic:
Wait until CTAS execution has reached MDL wait for multi-master
conflict case. Expected error from multi-master conflict is
ER_QUERY_INTERRUPTED. This is because CTAS does not yet have open
wsrep transaction when it is waiting for MDL, query gets interrupted
instead of BF aborted. This should be addressed in separate task.
* A new test galera_kill_group_commit to verify correct behavior
when KILL is executed while the transaction is committing.
Co-authored-by: Seppo Jaakola <seppo.jaakola@iki.fi>
Co-authored-by: Jan Lindström <jan.lindstrom@galeracluster.com>
Signed-off-by: Julius Goryavsky <julius.goryavsky@mariadb.com>
Problem for Galera is the fact that sequences are not really
transactional. Sequence operation is committed immediately
in sql_sequence.cd and later Galera could find out that
we have changes but actual statement is not there anymore.
Therefore, we must make some restrictions what kind
of sequences Galera can support.
(1) Galera cluster supports only sequences implemented
by InnoDB storage engine. This is because Galera replication
supports currently only InnoDB.
(2) We do not allow LOCK TABLE on sequence object and
we do not allow sequence creation under LOCK TABLE, instead
lock is released and we issue warning.
(3) We allow sequences with NOCACHE definition or with
INCREMEMENT BY 0 CACHE=n definition. This makes sure that
sequence values are unique accross Galera cluster.
Signed-off-by: Julius Goryavsky <julius.goryavsky@mariadb.com>
