- A prerequisite cleanup patch for making KILL reliable.
The test case main.kill did not work reliably.
The following problems have been identified:
1. A kill signal could go lost if it came in, short before a
thread went reading on the client connection.
2. A kill signal could go lost if it came in, short before a
thread went waiting on a condition variable.
These problems have been solved as follows. Please see also
added code comments for more details.
1. There is no safe way to detect, when a thread enters the
blocking state of a read(2) or recv(2) system call, where it
can be interrupted by a signal. Hence it is not possible to
wait for the right moment to send a kill signal. It has been
decided, not to fix it in the code. Instead, the test case
repeats the KILL statement until the connection terminates.
2. Before waiting on a condition variable, we register it
together with a synchronizating mutex in THD::mysys_var. After
this, we need to test THD::killed again. At some places we did
only test it in a loop condition before the registration. When
THD::killed had been set between this test and the registration,
we entered waiting without noticing the killed flag. Additional
checks ahve been introduced where required.
In addition to the above, a re-write of the main.kill test
case has been done. All sleeps have been replaced by Debug
Sync Facility synchronization. A couple of sync points have
been added to the server code.
To avoid further problems, if the test case fails in spite of
the fixes, the test case has been added to the "experimental"
list for now.
- Most of the work on this patch is authored by Ingo Struewing
mysql-test/t/kill.test:
Re-wrote test case to use Debug Sync points instead of sleeps
sql/event_queue.cc:
Fixed kill detection in Event_queue::cond_wait() by adding a check
after enter_cond().
sql/lock.cc:
Moved Debug Sync points behind enter_cond().
Fixed comments.
sql/slave.cc:
Fixed kill detection in start_slave_thread() by adding a check
after enter_cond().
sql/sql_class.cc:
Swapped order of kill and close in THD::awake().
Added comments.
sql/sql_class.h:
Added a comment to THD::killed.
sql/sql_parse.cc:
Added a sync point in do_command().
sql/sql_select.cc:
Added a sync point in JOIN::optimize().
Fix some bugs where we stored values other than 0 or 1 in my_bool
Fixed some compiler warnings
client/mysql.cc:
Changed interrupted_query from my_bool to int, as we stored 2 in it.
client/mysqladmin.cc:
Changed return variable type to same type as function value type
client/mysqltest.cc:
Changed 'found' to int as we store other values than 0 or 1 into it
Changed type for parameter of set_reconnect() to match usage.
extra/libevent/evbuffer.c:
Added __attribute__((unused))
extra/libevent/event.c:
Added __attribute__((unused))
extra/libevent/signal.c:
Added __attribute__((unused))
sql/event_data_objects.h:
my_bool -> bool
sql/event_db_repository.cc:
my_bool -> bool
sql/event_db_repository.h:
my_bool -> bool
sql/event_parse_data.h:
my_bool -> bool
sql/events.cc:
my_bool -> bool
sql/events.h:
my_bool -> bool
sql/field.cc:
my_bool -> bool
sql/field.h:
my_bool -> bool
sql/hash_filo.h:
my_bool -> bool
sql/item.cc:
my_bool -> bool
sql/item.h:
my_bool -> bool
sql/item_cmpfunc.h:
my_bool -> bool
Changed result_for_null_param from my_bool to int as we stored -1 in it.
sql/item_func.cc:
my_bool -> bool
Modified udf wrapper functions so that the UDF functions would continue to use my_bool. (To keep compatibility with UDF:s)
sql/item_func.h:
my_bool -> bool
sql/item_subselect.h:
my_bool -> bool
sql/item_sum.cc:
Modified udf wrapper functions so that the UDF functions would continue to use my_bool. (To keep compatibility with UDF:s)
sql/parse_file.h:
my_bool -> bool
sql/rpl_mi.h:
my_bool -> bool
sql/sp_rcontext.h:
my_bool -> bool
sql/sql_analyse.h:
my_bool -> bool
sql/sql_base.cc:
Change some assignments so that we don't initialize bool variables with int's.
sql/sql_bitmap.h:
my_bool -> bool
sql/sql_cache.cc:
my_bool -> bool
sql/sql_cache.h:
my_bool -> bool
sql/sql_class.h:
my_bool -> bool
sql/sql_insert.cc:
Change some assignments so that we don't initialize bool variables with int's.
sql/sql_prepare.cc:
my_bool -> bool
sql/table.h:
my_bool -> bool
storage/maria/ma_check.c:
Removed duplicate assignment
strings/decimal.c:
Fixed wrong variable usage.
Don't do complex arithmetic on bool when simple works.
- Changed to still use bcmp() in certain cases becasue
- Faster for short unaligneed strings than memcmp()
- Bettern when using valgrind
- Changed to use my_sprintf() instead of sprintf() to get higher portability for old systems
- Changed code to use MariaDB version of select->skip_record()
- Removed -%::SCCS/s.% from Makefile.am:s to remove automake warnings
'CREATE TABLE IF NOT EXISTS ... SELECT' behaviour
BUG#55474, BUG#55499, BUG#55598, BUG#55616 and BUG#55777 are fixed
in this patch too.
This is the 5.1 part.
It implements:
- if the table exists, binlog two events: CREATE TABLE IF NOT EXISTS
and INSERT ... SELECT
- Insert nothing and binlog nothing on master if the existing object
is a view. It only generates a warning that table already exists.
mysql-test/r/trigger.result:
Ather this patch, 'CREATE TABLE IF NOT EXISTS ... SELECT' will not
insert anything if the creating table already exists and is a view.
sql/sql_class.h:
Declare virtual function write_to_binlog() for select_insert.
It's used to binlog 'create select'
sql/sql_insert.cc:
Implement write_to_binlog();
Use write_to_binlog() instead of binlog_query() to binlog the statement.
if the table exists, binlog two events: CREATE TABLE IF NOT EXISTS
and INSERT ... SELECT
sql/sql_lex.h:
Declare create_select_start_with_brace and create_select_pos.
They are helpful for binlogging 'create select'
sql/sql_parse.cc:
Do nothing on master if the existing object is a view.
sql/sql_yacc.yy:
Record the relative postion of 'SELECT' in the 'CREATE ...SELECT' statement.
Record whether there is a '(' before the 'SELECT' clause.
After BUG#36649, warnings for sub-statements are cleared when a
new sub-statement is started. This is problematic since it suppresses
warnings for unsafe statements in some cases. It is important that we
always give a warning to the client, because the user needs to know
when there is a risk that the slave goes out of sync.
We fixed the problem by generating warning messages for unsafe statements
while returning from a stored procedure, function, trigger or while
executing a top level statement.
We also started checking unsafeness when both performance and log tables are
used. This is necessary after the performance schema which does a distinction
between performance and log tables.
mysql-test/extra/rpl_tests/create_recursive_construct.inc:
Changed the order of the calls in the procedure because the code
that checks if a warning message is printed out expects that the
first statement gives an warning what is not the case for INSERT
INTO ta$CRC_ARG_level VALUES (47);
mysql-test/suite/binlog/r/binlog_stm_unsafe_warning.result:
Updated the result file.
mysql-test/suite/binlog/r/binlog_unsafe.result:
There are several changes here:
(1) - Changed the CREATE PROCEDURE $CRC.
(2) - The procedure $CRC was failing and the content of the binlog
was being printed out, after fix (1) the failure disappeared.
(3) - The warning message for unsafeness due to auto-increment collumns was
changed.
(4) - The warning message for unsafeness due to VERSION(), RAND() was changed.
mysql-test/suite/binlog/t/binlog_stm_unsafe_warning.test:
Tested filters.
mysql-test/suite/binlog/t/binlog_unsafe.test:
Reenabled the test case binlog_unsafe.
mysql-test/suite/binlog/t/disabled.def:
Reenabled the test case binlog_unsafe.
mysql-test/suite/rpl/r/rpl_begin_commit_rollback.result:
Updated the result file.
mysql-test/suite/rpl/r/rpl_non_direct_stm_mixing_engines.result:
Updated the result file.
mysql-test/suite/rpl/r/rpl_stm_auto_increment_bug33029.result:
Updated the result file.
sql/sql_class.cc:
Moved the stmt_accessed_table_flag variable and related information to the
LEX as we need the variable reset after each statement even inside a stored
procedure, what did not happen if the information was in the THD.
Changed the routine in the THD::binlog_query that prints the warning
messages to avoid trying to print them when inside a stored procedure,
function or trigger.
Checked for unsafeness when both performance and log tables where used.
After the introduction of the performance schema, we need to check both.
Incorrect limitation on number of parameters removed.
mysql-test/r/subselect_cache.result:
Test suite added.
mysql-test/t/subselect_cache.test:
Test suite added.
sql/sql_class.h:
Iterator changed.
sql/sql_expression_cache.cc:
Incorrect limitation removed.
Removing NULL references from subquery parameter list added.
******
This patch fixes the following bugs:
- Bug#5889: Exit handler for a warning doesn't hide the warning in
trigger
- Bug#9857: Stored procedures: handler for sqlwarning ignored
- Bug#23032: Handlers declared in a SP do not handle warnings generated
in sub-SP
- Bug#36185: Incorrect precedence for warning and exception handlers
The problem was in the way warnings/errors during stored routine execution
were handled. Prior to this patch the logic was as follows:
- when a warning/an error happens: if we're executing a stored routine,
and there is a handler for that warning/error, remember the handler,
ignore the warning/error and continue execution.
- after a stored routine instruction is executed: check for a remembered
handler and activate one (if any).
This logic caused several problems:
- if one instruction generates several warnings (errors) it's impossible
to choose the right handler -- a handler for the first generated
condition was chosen and remembered for activation.
- mess with handling conditions in scopes different from the current one.
- not putting generated warnings/errors into Warning Info (Diagnostic
Area) is against The Standard.
The patch changes the logic as follows:
- Diagnostic Area is cleared on the beginning of each statement that
either is able to generate warnings, or is able to work with tables.
- at the end of a stored routine instruction, Diagnostic Area is left
intact.
- Diagnostic Area is checked after each stored routine instruction. If
an instruction generates several condition, it's now possible to take a
look at all of them and determine an appropriate handler.
mysql-test/r/signal.result:
Update result file:
1. handled conditions are not cleared any more;
2. reflect changes in signal.test
mysql-test/r/signal_demo3.result:
Update result file: handled conditions are not cleared any more.
Due to playing with max_error_count, resulting warning lists
have changed.
mysql-test/r/sp-big.result:
Update result file: handled conditions are not cleared any more.
mysql-test/r/sp-bugs.result:
Update result file: handled conditions are not cleared any more.
mysql-test/r/sp-code.result:
Update result file:
1. handled conditions are not cleared any more.
2. add result for a new test case in sp-code.test.
mysql-test/r/sp-error.result:
Update result file:
1. handled conditions are not cleared any more.
2. add result for a new test case in sp-error.test.
mysql-test/r/sp.result:
Update result file: handled conditions are not cleared any more.
mysql-test/r/sp_trans.result:
Update result file: handled conditions are not cleared any more.
mysql-test/r/strict.result:
Update result file: handled conditions are not cleared any more.
mysql-test/r/view.result:
Update result file: handled conditions are not cleared any more.
mysql-test/suite/funcs_1/r/innodb_storedproc_02.result:
Update result file: handled conditions are not cleared any more.
mysql-test/suite/funcs_1/r/memory_storedproc_02.result:
Update result file: handled conditions are not cleared any more.
mysql-test/suite/funcs_1/r/myisam_storedproc_02.result:
Update result file: handled conditions are not cleared any more.
mysql-test/suite/funcs_1/r/storedproc.result:
Update result file: handled conditions are not cleared any more.
mysql-test/suite/rpl/r/rpl_row_sp005.result:
Update result file: handled conditions are not cleared any more.
mysql-test/suite/rpl/r/rpl_row_sp006_InnoDB.result:
Update result file: handled conditions are not cleared any more.
mysql-test/suite/rpl/r/rpl_row_trig003.result:
Update result file: handled conditions are not cleared any more.
mysql-test/t/signal.test:
Make a test case more readable in the result file.
mysql-test/t/sp-code.test:
Add a test case for Bug#23032 checking that
No Data takes precedence on Warning.
mysql-test/t/sp-error.test:
Adding test cases for:
- Bug#23032
- Bug#36185
- Bug#5889
- Bug#9857
mysql-test/t/sp.test:
Fixing test case to reflect behavioral changes made by the patch.
sql/sp_head.cc:
Reset the per-statement warning count before executing
a stored procedure instruction.
Move to a separate function code which checks the
completion status of the executed statement and searches
for a handler.
Remove redundant code now that search for a handler is
done after execution, errors are always pushed.
sql/sp_pcontext.h:
Remove unused code.
sql/sp_rcontext.cc:
- Polish sp_rcontext::find_handler(): use sp_rcontext::m_hfound instead
of an extra local variable;
- Remove sp_rcontext::handle_condition();
- Introduce sp_rcontext::activate_handler(), which prepares
previously found handler for execution.
- Move sp_rcontext::enter_handler() code into activate_handler(),
because enter_handler() is used only from there;
- Cleanups;
- Introduce DBUG_EXECUTE_IF() for a test case in sp-code.test
sql/sp_rcontext.h:
- Remove unused code
- Cleanups
sql/sql_class.cc:
Merge THD::raise_condition_no_handler() into THD::raise_condition().
After the patch raise_condition_no_handler() was called
in raise_condition() only.
sql/sql_class.h:
Remove raise_condition_no_handler().
sql/sql_error.cc:
Remove Warning_info::reserve_space() -- handled conditions are not
cleared any more, so there is no need for RESIGNAL to re-push them.
sql/sql_error.h:
Remove Warning_info::reserve_space().
sql/sql_signal.cc:
Handled conditions are not cleared any more,
so there is no need for RESIGNAL to re-push them.
Remove dead and unused code.
Update to reflect the code review requests.
include/thr_lock.h:
Remove declarations for THR_LOCK_OWNER,
added along with the patch for sensitive cursors.
mysys/thr_lock.c:
Remove support for multiple thr_lock requestors
per THD.
sql/lock.cc:
Revert the patch that added support for sensitive cursors.
sql/sp_rcontext.cc:
Updated the use of mysql_open_cursor().
sql/sql_class.cc:
Move the instance of Server_side_cursor
from class Prepared_statement to class Statement.
sql/sql_class.h:
Move the isntance of Server_side_cursor
from class Prepared_statement to class
Statement.
Remove multiple lock_ids of thr_lock.
sql/sql_cursor.cc:
Remove Sensitive_cursor implementation.
sql/sql_cursor.h:
Remove declarations for sensitive cursors.
sql/sql_prepare.cc:
Move the declaration of instance of Server_side_cursor
from class Statement to class Prepared_statement,
where it's used.
sql/sql_select.cc:
Remove sensitive cursor support.
sql/sql_select.h:
Remove sensitive cursor support.
sql/sql_union.cc:
Remove sensitive cursor support.
If the expression for a virtual column of table contained datetime
comparison then the execution of the second query that used this
virtual column caused a crash. It happened because the execution
of the first query that used this virtual column inserted a cached
item into the expression tree. The cached tree was allocated in
the statement memory while the expression tree was allocated in
the table memory.
Now the cached items that are inserted into expressions for virtual
columns with datetime comparisons are always allocated in the same
mem_root as the expressions for virtual columns. So now the inserted
cached items are valid for any queries that use these virtual columns.
was not cleaned up between PS re-executions. The reason was two-fold:
- a merge with mysql-6.0 missed select_union::cleanup() that should
have cleaned up the temp table, and
- the subclass of select_union used by materialization didn't call
the base class cleanup() method.
1. Changed the lazy optimization for subqueries that can be
materialized into bottom-up optimization during the optimization of
the main query.
The main change is implemented by the method
Item_in_subselect::setup_engine.
All other changes were required to correct problems resulting from
changing the order of optimization. Most of these problems followed
the same pattern - there are some shared structures between a
subquery and its parent query. Depending on which one is optimized
first (parent or child query), these shared strucutres may get
different values, thus resulting in an inconsistent query plan.
2. Changed the code-generation for subquery materialization to be
performed in runtime memory for each (re)execution, instead of in
statement memory (once per prepared statement).
- Item_in_subselect::setup_engine() no longer creates materialization
related objects in statement memory.
- Merged subselect_hash_sj_engine::init_permanent and
subselect_hash_sj_engine::init_runtime into
subselect_hash_sj_engine::init, which is called for each
(re)execution.
- Fixed deletion of the temp table accordingly.
mysql-test/r/subselect_mat.result:
Adjusted changed EXPLAIN because of earlier optimization of subqueries.
bytes_received/bytes_sent are ulonglong so they cannot be handled by the
ulong handling code in add_to_status/add_diff_to_status().
Fixed by adding code to handle these two variables in
add_to_status()/add_diff_to_status() and making sure they are not a subject
to the ulong handling code.
Symptom:
When the sql function SLEEP() was executed in the slave SQL thread or from an event (as in
CREATE EVENT, not binlog event), then the timeout was capped to 5 seconds.
Background:
This bug was introduced in the fix of BUG#10374, in the function interruptible_wait() in
item_func.cc.
The function interruptible_wait(), called from item_func_sleep::val_int(), splits the
sleep into 5 seconds units. After each unit, it checks if thd->is_connected() is true: if
not, it stops sleeping. The purpose is to not use system resources to sleep when a client
disconnects.
However, thd->is_connected() returns false for the slave SQL thread and for the event
worker thread, because they don't connect to the server the same way as client threads
do.
Fix:
Make thd->is_connected() return true for all system threads.
sql/sql_class.h:
Made THD::is_connected() return true for all system threads.
libmysqld/Makefile.am:
The new file added.
mysql-test/r/index_merge_myisam.result:
subquery_cache optimization option added.
mysql-test/r/myisam_mrr.result:
subquery_cache optimization option added.
mysql-test/r/subquery_cache.result:
The subquery cache tests added.
mysql-test/r/subselect3.result:
Subquery cache switched off to avoid changing read statistics.
mysql-test/r/subselect3_jcl6.result:
Subquery cache switched off to avoid changing read statistics.
mysql-test/r/subselect_no_mat.result:
subquery_cache optimization option added.
mysql-test/r/subselect_no_opts.result:
subquery_cache optimization option added.
mysql-test/r/subselect_no_semijoin.result:
subquery_cache optimization option added.
mysql-test/r/subselect_sj.result:
subquery_cache optimization option added.
mysql-test/r/subselect_sj_jcl6.result:
subquery_cache optimization option added.
mysql-test/t/subquery_cache.test:
The subquery cache tests added.
mysql-test/t/subselect3.test:
Subquery cache switched off to avoid changing read statistics.
sql/CMakeLists.txt:
The new file added.
sql/Makefile.am:
The new files added.
sql/item.cc:
Expression cache item (Item_cache_wrapper) added.
Item_ref and Item_field fixed for correct usage of result field and fast resolwing in SP.
sql/item.h:
Expression cache item (Item_cache_wrapper) added.
Item_ref and Item_field fixed for correct usage of result field and fast resolwing in SP.
sql/item_cmpfunc.cc:
Subquery cache added.
sql/item_cmpfunc.h:
Subquery cache added.
sql/item_subselect.cc:
Subquery cache added.
sql/item_subselect.h:
Subquery cache added.
sql/item_sum.cc:
Registration of subquery parameters added.
sql/mysql_priv.h:
subquery_cache optimization option added.
sql/mysqld.cc:
subquery_cache optimization option added.
sql/opt_range.cc:
Fix due to subquery cache.
sql/opt_subselect.cc:
Parameters of the function cahnged.
sql/procedure.h:
.h file guard added.
sql/sql_base.cc:
Registration of subquery parameters added.
sql/sql_class.cc:
Option to allow add indeces to temporary table.
sql/sql_class.h:
Item iterators added.
Option to allow add indeces to temporary table.
sql/sql_expression_cache.cc:
Expression cache for caching subqueries added.
sql/sql_expression_cache.h:
Expression cache for caching subqueries added.
sql/sql_lex.cc:
Registration of subquery parameters added.
sql/sql_lex.h:
Registration of subqueries and subquery parameters added.
sql/sql_select.cc:
Subquery cache added.
sql/sql_select.h:
Subquery cache added.
sql/sql_union.cc:
A new parameter to the function added.
sql/sql_update.cc:
A new parameter to the function added.
sql/table.cc:
Procedures to manage temporarty tables index added.
sql/table.h:
Procedures to manage temporarty tables index added.
storage/maria/ha_maria.cc:
Fix of handler to allow destoy a table in case of error during the table creation.
storage/maria/ha_maria.h:
.h file guard added.
storage/myisam/ha_myisam.cc:
Fix of handler to allow destoy a table in case of error during the table creation.
Essentially, the problem is that safemalloc is excruciatingly
slow as it checks all allocated blocks for overrun at each
memory management primitive, yielding a almost exponential
slowdown for the memory management functions (malloc, realloc,
free). The overrun check basically consists of verifying some
bytes of a block for certain magic keys, which catches some
simple forms of overrun. Another minor problem is violation
of aliasing rules and that its own internal list of blocks
is prone to corruption.
Another issue with safemalloc is rather the maintenance cost
as the tool has a significant impact on the server code.
Given the magnitude of memory debuggers available nowadays,
especially those that are provided with the platform malloc
implementation, maintenance of a in-house and largely obsolete
memory debugger becomes a burden that is not worth the effort
due to its slowness and lack of support for detecting more
common forms of heap corruption.
Since there are third-party tools that can provide the same
functionality at a lower or comparable performance cost, the
solution is to simply remove safemalloc. Third-party tools
can provide the same functionality at a lower or comparable
performance cost.
The removal of safemalloc also allows a simplification of the
malloc wrappers, removing quite a bit of kludge: redefinition
of my_malloc, my_free and the removal of the unused second
argument of my_free. Since free() always check whether the
supplied pointer is null, redudant checks are also removed.
Also, this patch adds unit testing for my_malloc and moves
my_realloc implementation into the same file as the other
memory allocation primitives.
client/mysqldump.c:
Pass my_free directly as its signature is compatible with the
callback type -- which wasn't the case for free_table_ent.
DROP USER
RENAME USER CURRENT_USER() ...
GRANT ... TO CURRENT_USER()
REVOKE ... FROM CURRENT_USER()
ALTER DEFINER = CURRENT_USER() EVENTbut, When these statements are binlogged, CURRENT_USER() just is binlogged
as 'CURRENT_USER()', it is not expanded to the real user name. When slave
executes the log event, 'CURRENT_USER()' is expand to the user of slave
SQL thread, but SQL thread's user name always NULL. This breaks the replication.
After this patch, session's user will be written into query log events
if these statements call CURREN_USER() or 'ALTER EVENT' does not assign a definer.
mysql-test/include/diff_tables.inc:
Expend its abilities.
Now it can diff not only in sessions of 'master' and 'slave', but
other sessions as well.
sql/log_event.cc:
session's user will be written into Query_log_event, if is_current_user_used() is TRUE.
On slave SQL thread, Only thd->invoker is written into Query_log_event,
if it exists.
sql/sql_acl.cc:
On slave SQL thread, grantor should copy from thd->invoker, if it exists
sql/sql_class.h:
On slave SQL thread, thd->invoker is used to store the applying event's
invoker.
Apart strict-aliasing warnings, fix the remaining warnings
generated by GCC 4.4.4 -Wall and -Wextra flags.
One major source of warnings was the in-house function my_bcmp
which (unconventionally) took pointers to unsigned characters
as the byte sequences to be compared. Since my_bcmp and bcmp
are deprecated functions whose only difference with memcmp is
the return value, every use of the function is replaced with
memcmp as the special return value wasn't actually being used
by any caller.
There were also various other warnings, mostly due to type
mismatches, missing return values, missing prototypes, dead
code (unreachable) and ignored return values.
BUILD/SETUP.sh:
Remove flags that are implied by -Wall and -Wextra.
Do not warn about unused parameters in C++.
BUILD/check-cpu:
Print only the compiler version instead of verbose banner.
Although the option is gcc specific, the check was only
being used for GCC specific checks anyway.
client/mysql.cc:
bcmp is no longer defined.
client/mysqltest.cc:
Pass a string to function expecting a format string.
Replace use of bcmp with memcmp.
cmd-line-utils/readline/Makefile.am:
Always define _GNU_SOURCE when compiling GNU readline.
Required to make certain prototypes visible.
cmd-line-utils/readline/input.c:
Condition for the code to be meaningful.
configure.in:
Remove check for bcmp.
extra/comp_err.c:
Use appropriate type.
extra/replace.c:
Replace use of bcmp with memcmp.
extra/yassl/src/crypto_wrapper.cpp:
Do not ignore the return value of fgets. Retrieve the file
position if fgets succeed -- if it fails, the function will
bail out and return a error.
extra/yassl/taocrypt/include/blowfish.hpp:
Use a single array instead of accessing positions of the sbox_
through a subscript to pbox_.
extra/yassl/taocrypt/include/runtime.hpp:
One definition of such functions is enough.
extra/yassl/taocrypt/src/aes.cpp:
Avoid potentially ambiguous conditions.
extra/yassl/taocrypt/src/algebra.cpp:
Rename arguments to avoid shadowing related warnings.
extra/yassl/taocrypt/src/blowfish.cpp:
Avoid potentially ambiguous conditions.
extra/yassl/taocrypt/src/integer.cpp:
Do not define type within a anonymous union.
Use a variable to return a value instead of
leaving the result in a register -- compiler
does not know the logic inside the asm.
extra/yassl/taocrypt/src/misc.cpp:
Define handler for pure virtual functions.
Remove unused code.
extra/yassl/taocrypt/src/twofish.cpp:
Avoid potentially ambiguous conditions.
extra/yassl/testsuite/test.hpp:
Function must have C language linkage.
include/m_string.h:
Remove check which relied on bcmp being defined -- they weren't
being used as bcmp is only visible when _BSD_SOURCE is defined.
include/my_bitmap.h:
Remove bogus helpers which were used only in a few files and
were causing warnings about dead code.
include/my_global.h:
Due to G++ bug, always silence false-positive uninitialized
variables warnings when compiling C++ code with G++.
Remove bogus helper.
libmysql/Makefile.shared:
Remove built-in implementation of bcmp.
mysql-test/lib/My/SafeProcess/safe_process.cc:
Cast pid to largest possible type for a process identifier.
mysys/mf_loadpath.c:
Leave space of the ending nul.
mysys/mf_pack.c:
Replace bcmp with memcmp.
mysys/my_bitmap.c:
Dead code removal.
mysys/my_gethwaddr.c:
Remove unused variable.
mysys/my_getopt.c:
Silence bogus uninitialized variable warning.
Do not cast away the constant qualifier.
mysys/safemalloc.c:
Cast to expected type.
mysys/thr_lock.c:
Silence bogus uninitialized variable warning.
sql/field.cc:
Replace bogus helper with a more appropriate logic which is
used throughout the code.
sql/item.cc:
Remove bogus logical condition which always evaluates to TRUE.
sql/item_create.cc:
Simplify code to avoid signedness related warnings.
sql/log_event.cc:
Replace use of bcmp with memcmp.
No need to use helpers for simple bit operations.
sql/log_event_old.cc:
Replace bmove_align with memcpy.
sql/mysqld.cc:
Move use declaration of variable to the ifdef block where it
is used. Remove now-unnecessary casts and arguments.
sql/set_var.cc:
Replace bogus helpers with simple and classic bit operations.
sql/slave.cc:
Cast to expected type and silence bogus warning.
sql/sql_class.h:
Don't use enum values as bit flags, the supposed type safety is
bogus as the combined bit flags are not a value in the enumeration.
sql/udf_example.c:
Only declare variable when necessary.
sql/unireg.h:
Replace use of bmove_align with memcpy.
storage/innobase/os/os0file.c:
Silence bogus warning.
storage/myisam/mi_open.c:
Remove bogus cast, DBUG_DUMP expects a pointer to unsigned
char.
storage/myisam/mi_page.c:
Remove bogus cast, DBUG_DUMP expects a pointer to unsigned
char.
strings/bcmp.c:
Remove built-in bcmp.
strings/ctype-ucs2.c:
Silence bogus warning.
tests/mysql_client_test.c:
Use a appropriate type as expected by simple_command().
