The task is to
(a) add a comment on indexes and
(b) increase the maximum length of column, table and the new index comments.
The patch committed on behalf of Yoshinori Matsunobu (Yoshinori.Matsunobu@Sun.COM).
causing crashes!
Adding a SPATIAL INDEX on a non-geometrical column caused a
segmentation fault when the table was subsequently
inserted into.
A test was added in mysql_prepare_create_table to explicitly
check whether non-geometrical columns are used in a
spatial index, and throw an error if so.
corruption and crash results
An index creation statement where the index key
is larger/wider than the column it references
should throw an error.
A statement like:
CREATE TABLE t1 (a CHAR(1), PRIMARY KEY (A(255)))
did not error, but a segmentation fault followed when
an insertion was attempted on the table
The partial key validiation clause has been
restructured to (hopefully) better document which
uses of partial keys are valid.
This patch introduces timeouts for metadata locks.
The timeout is specified in seconds using the new dynamic system
variable "lock_wait_timeout" which has both GLOBAL and SESSION
scopes. Allowed values range from 1 to 31536000 seconds (= 1 year).
The default value is 1 year.
The new server parameter "lock-wait-timeout" can be used to set
the default value parameter upon server startup.
"lock_wait_timeout" applies to all statements that use metadata locks.
These include DML and DDL operations on tables, views, stored procedures
and stored functions. They also include LOCK TABLES, FLUSH TABLES WITH
READ LOCK and HANDLER statements.
The patch also changes thr_lock.c code (table data locks used by MyISAM
and other simplistic engines) to use the same system variable.
InnoDB row locks are unaffected.
One exception to the handling of the "lock_wait_timeout" variable
is delayed inserts. All delayed inserts are executed with a timeout
of 1 year regardless of the setting for the global variable. As the
connection issuing the delayed insert gets no notification of
delayed insert timeouts, we want to avoid unnecessary timeouts.
It's important to note that the timeout value is used for each lock
acquired and that one statement can take more than one lock.
A statement can therefore block for longer than the lock_wait_timeout
value before reporting a timeout error. When lock timeout occurs,
ER_LOCK_WAIT_TIMEOUT is reported.
Test case added to lock_multi.test.
Problem was that in mysql-trunk the ER() macro is now dependent on current_thd
and the innodb monitor thread has no binding to that thd object. This cause
the crash because of bad derefencing.
Solution was to add a new macro which take the thd as an argument (which the innodb
thread uses for the call).
(Updated according to reviewers comments, i.e. added ER_THD_OR_DEFAULT and
moved test to suite parts.)
Change the error code for ER_WARN_I_S_SKIPPED_TABLE, to not
upset the tests that rely on ER_SLAVE_CONVERSION_ERROR error
code = 1667.
Fix a merge bug with binlogging of CREATE TABLE (temporary tables).
Cherry-pick a fix Bug#37148 from next-mr, to preserve
file ids of the added files, and ensure that all the necessary
changes have been pulled.
Since initially Bug#37148 was null-merged into 6.0,
the changeset that is now being cherry-picked was likewise
null merged into next-4284.
Now that Bug#37148 has been reapplied to 6.0, try to make
it work with next-4284. This is also necessary to be able
to pull other changes from 5.1-rep into next-4284.
To resolve the merge issues use this changeset applied
to 6.0:
revid:jperkin@sun.com-20091216103628-ylhqf7s6yegui2t9
revno: 3776.1.1
committer: He Zhenxing <zhenxing.he@sun.com>
branch nick: 6.0-codebase-bugfixing
timestamp: Thu 2009-12-17 17:02:50 +0800
message:
Fix merge problem with Bug#37148
Removed local variables which became unused when we
have switched to new approach for CREATE TABLE LIKE
(i.e. abondoned .FRM file copying) and were causing
warnings during compilation.
m_tickets.front() == m_trans_sentinel'".
Debug build of server crashed due to assert failure in MDL
subsystem when one tried to execute multi-table REPAIR or
OPTIMIZE in autocommit=0 mode.
The assert failure occured when multi-table REPAIR or OPTIMIZE
started processing of second table from its table list and
tried to acquire upgradable metadata lock on this table.
The cause of the assert failure were MDL locks left over from
processing of previous table. It turned out that in autocommit=0
mode close_thread_tables() which happens at the end of table
processing doesn't release metadata locks.
This fix solves problem by releasing locks explicitly using
MDL_context::release_trans_locks() call.
There was two problems:
The first was the symptom, caused by bad error handling in
ha_partition. It did not handle print_error etc. when
having no partitions (when used by dummy handler).
The second was the real problem that when dropping tables
it reused the table type (storage engine) from when the lock
was asked for, not the table type that it had when gaining
the exclusive name lock. So that it tried to delete tables
from wrong storage engines.
Solutions for the first problem was to accept some handler
calls to the partitioning handler even if it was not setup
with any partitions, and also if possible fallback
to use the base handler's default functions.
Solution for the second problem was to remove the optimization
to reuse the definition from the cache, instead always check
the frm-file when holding the LOCK_open mutex
(updated with a fix for a debug print crash and better
comments as required by reviewer, and removed optimization
to avoid reading the frm-file).
Add a wait-for graph based deadlock detector to the
MDL subsystem.
Fixes bug #46272 "MySQL 5.4.4, new MDL: unnecessary deadlock" and
bug #37346 "innodb does not detect deadlock between update and
alter table".
The first bug manifested itself as an unwarranted abort of a
transaction with ER_LOCK_DEADLOCK error by a concurrent ALTER
statement, when this transaction tried to repeat use of a
table, which it has already used in a similar fashion before
ALTER started.
The second bug showed up as a deadlock between table-level
locks and InnoDB row locks, which was "detected" only after
innodb_lock_wait_timeout timeout.
A transaction would start using the table and modify a few
rows.
Then ALTER TABLE would come in, and start copying rows
into a temporary table. Eventually it would stumble on
the modified records and get blocked on a row lock.
The first transaction would try to do more updates, and get
blocked on thr_lock.c lock.
This situation of circular wait would only get resolved
by a timeout.
Both these bugs stemmed from inadequate solutions to the
problem of deadlocks occurring between different
locking subsystems.
In the first case we tried to avoid deadlocks between metadata
locking and table-level locking subsystems, when upgrading shared
metadata lock to exclusive one.
Transactions holding the shared lock on the table and waiting for
some table-level lock used to be aborted too aggressively.
We also allowed ALTER TABLE to start in presence of transactions
that modify the subject table. ALTER TABLE acquires
TL_WRITE_ALLOW_READ lock at start, and that block all writes
against the table (naturally, we don't want any writes to be lost
when switching the old and the new table). TL_WRITE_ALLOW_READ
lock, in turn, would block the started transaction on thr_lock.c
lock, should they do more updates. This, again, lead to the need
to abort such transactions.
The second bug occurred simply because we didn't have any
mechanism to detect deadlocks between the table-level locks
in thr_lock.c and row-level locks in InnoDB, other than
innodb_lock_wait_timeout.
This patch solves both these problems by moving lock conflicts
which are causing these deadlocks into the metadata locking
subsystem, thus making it possible to avoid or detect such
deadlocks inside MDL.
To do this we introduce new type-of-operation-aware metadata
locks, which allow MDL subsystem to know not only the fact that
transaction has used or is going to use some object but also what
kind of operation it has carried out or going to carry out on the
object.
This, along with the addition of a special kind of upgradable
metadata lock, allows ALTER TABLE to wait until all
transactions which has updated the table to go away.
This solves the second issue.
Another special type of upgradable metadata lock is acquired
by LOCK TABLE WRITE. This second lock type allows to solve the
first issue, since abortion of table-level locks in event of
DDL under LOCK TABLES becomes also unnecessary.
Below follows the list of incompatible changes introduced by
this patch:
- From now on, ALTER TABLE and CREATE/DROP TRIGGER SQL (i.e. those
statements that acquire TL_WRITE_ALLOW_READ lock)
wait for all transactions which has *updated* the table to
complete.
- From now on, LOCK TABLES ... WRITE, REPAIR/OPTIMIZE TABLE
(i.e. all statements which acquire TL_WRITE table-level lock) wait
for all transaction which *updated or read* from the table
to complete.
As a consequence, innodb_table_locks=0 option no longer applies
to LOCK TABLES ... WRITE.
- DROP DATABASE, DROP TABLE, RENAME TABLE no longer abort
statements or transactions which use tables being dropped or
renamed, and instead wait for these transactions to complete.
- Since LOCK TABLES WRITE now takes a special metadata lock,
not compatible with with reads or writes against the subject table
and transaction-wide, thr_lock.c deadlock avoidance algorithm
that used to ensure absence of deadlocks between LOCK TABLES
WRITE and other statements is no longer sufficient, even for
MyISAM. The wait-for graph based deadlock detector of MDL
subsystem may sometimes be necessary and is involved. This may
lead to ER_LOCK_DEADLOCK error produced for multi-statement
transactions even if these only use MyISAM:
session 1: session 2:
begin;
update t1 ... lock table t2 write, t1 write;
-- gets a lock on t2, blocks on t1
update t2 ...
(ER_LOCK_DEADLOCK)
- Finally, support of LOW_PRIORITY option for LOCK TABLES ... WRITE
was abandoned.
LOCK TABLE ... LOW_PRIORITY WRITE from now on has the same
priority as the usual LOCK TABLE ... WRITE.
SELECT HIGH PRIORITY no longer trumps LOCK TABLE ... WRITE in
the wait queue.
- We do not take upgradable metadata locks on implicitly
locked tables. So if one has, say, a view v1 that uses
table t1, and issues:
LOCK TABLE v1 WRITE;
FLUSH TABLE t1; -- (or just 'FLUSH TABLES'),
an error is produced.
In order to be able to perform DDL on a table under LOCK TABLES,
the table must be locked explicitly in the LOCK TABLES list.
Rename method as to not hide a base.
Reorder attributes initialization.
Remove unused variable.
Rework code to silence a warning due to assignment used as truth value.
condition variable per context instead of one mutex and one conditional
variable for the whole subsystem.
This should increase concurrency in this subsystem.
It also opens the way for further changes which are necessary to solve
such bugs as bug #46272 "MySQL 5.4.4, new MDL: unnecessary deadlock"
and bug #37346 "innodb does not detect deadlock between update and alter
table".
Two other notable changes done by this patch:
- MDL subsystem no longer implicitly acquires global intention exclusive
metadata lock when per-object metadata lock is acquired. Now this has
to be done by explicit calls outside of MDL subsystem.
- Instead of using separate MDL_context for opening system tables/tables
for purposes of I_S we now create MDL savepoint in the main context
before opening tables and rollback to this savepoint after closing
them. This means that it is now possible to get ER_LOCK_DEADLOCK error
even not inside a transaction. This might happen in unlikely case when
one runs DDL on one of system tables while also running DDL on some
other tables. Cases when this ER_LOCK_DEADLOCK error is not justified
will be addressed by advanced deadlock detector for MDL subsystem which
we plan to implement.
REORGANIZE PARTITION
There were several problems which lead to this this,
all related to bad error handling.
1) There was several bugs preventing the ddl-log to be used for
cleaning up created files on error.
2) The error handling after the copy partition rows did not close
and unlock the tables, resulting in deletion of partitions
which were in use, which lead InnoDB to put the partition to
drop in a background queue.
Conflicts:
Text conflict in .bzr-mysql/default.conf
Text conflict in mysql-test/extra/rpl_tests/rpl_loaddata.test
Text conflict in mysql-test/r/mysqlbinlog2.result
Text conflict in mysql-test/suite/binlog/r/binlog_stm_mix_innodb_myisam.result
Text conflict in mysql-test/suite/binlog/r/binlog_unsafe.result
Text conflict in mysql-test/suite/rpl/r/rpl_insert_id.result
Text conflict in mysql-test/suite/rpl/r/rpl_loaddata.result
Text conflict in mysql-test/suite/rpl/r/rpl_stm_auto_increment_bug33029.result
Text conflict in mysql-test/suite/rpl/r/rpl_udf.result
Text conflict in mysql-test/suite/rpl/t/rpl_slow_query_log.test
Text conflict in sql/field.h
Text conflict in sql/log.cc
Text conflict in sql/log_event.cc
Text conflict in sql/log_event_old.cc
Text conflict in sql/mysql_priv.h
Text conflict in sql/share/errmsg.txt
Text conflict in sql/sp.cc
Text conflict in sql/sql_acl.cc
Text conflict in sql/sql_base.cc
Text conflict in sql/sql_class.h
Text conflict in sql/sql_db.cc
Text conflict in sql/sql_delete.cc
Text conflict in sql/sql_insert.cc
Text conflict in sql/sql_lex.cc
Text conflict in sql/sql_lex.h
Text conflict in sql/sql_load.cc
Text conflict in sql/sql_table.cc
Text conflict in sql/sql_update.cc
Text conflict in sql/sql_view.cc
Conflict adding files to storage/innobase. Created directory.
Conflict because storage/innobase is not versioned, but has versioned children. Versioned directory.
Conflict adding file storage/innobase. Moved existing file to storage/innobase.moved.
Conflict adding files to storage/innobase/handler. Created directory.
Conflict because storage/innobase/handler is not versioned, but has versioned children. Versioned directory.
Contents conflict in storage/innobase/handler/ha_innodb.cc
3655 Jon Olav Hauglid 2009-10-19
Bug #30977 Concurrent statement using stored function and DROP FUNCTION
breaks SBR
Bug #48246 assert in close_thread_table
Implement a fix for:
Bug #41804 purge stored procedure cache causes mysterious hang for many
minutes
Bug #49972 Crash in prepared statements
The problem was that concurrent execution of DML statements that
use stored functions and DDL statements that drop/modify the same
function might result in incorrect binary log in statement (and
mixed) mode and therefore break replication.
This patch fixes the problem by introducing metadata locking for
stored procedures and functions. This is similar to what is done
in Bug#25144 for views. Procedures and functions now are
locked using metadata locks until the transaction is either
committed or rolled back. This prevents other statements from
modifying the procedure/function while it is being executed. This
provides commit ordering - guaranteeing serializability across
multiple transactions and thus fixes the reported binlog problem.
Note that we do not take locks for top-level CALLs. This means
that procedures called directly are not protected from changes by
simultaneous DDL operations so they are executed at the state they
had at the time of the CALL. By not taking locks for top-level
CALLs, we still allow transactions to be started inside
procedures.
This patch also changes stored procedure cache invalidation.
Upon a change of cache version, we no longer invalidate the entire
cache, but only those routines which we use, only when a statement
is executed that uses them.
This patch also changes the logic of prepared statement validation.
A stored procedure used by a prepared statement is now validated
only once a metadata lock has been acquired. A version mismatch
causes a flush of the obsolete routine from the cache and
statement reprepare.
Incompatible changes:
1) ER_LOCK_DEADLOCK is reported for a transaction trying to access
a procedure/function that is locked by a DDL operation in
another connection.
2) Procedure/function DDL operations are now prohibited in LOCK
TABLES mode as exclusive locks must be taken all at once and
LOCK TABLES provides no way to specifiy procedures/functions to
be locked.
Test cases have been added to sp-lock.test and rpl_sp.test.
Work on this bug has very much been a team effort and this patch
includes and is based on contributions from Davi Arnaut, Dmitry
Lenev, Magne Mæhre and Konstantin Osipov.
Conflicts:
Conflict adding files to server-tools. Created directory.
Conflict because server-tools is not versioned, but has versioned children. Versioned directory.
Conflict adding files to server-tools/instance-manager. Created directory.
Conflict because server-tools/instance-manager is not versioned, but has versioned children. Versioned directory.
Contents conflict in server-tools/instance-manager/instance_map.cc
Contents conflict in server-tools/instance-manager/listener.cc
Contents conflict in server-tools/instance-manager/options.cc
Contents conflict in server-tools/instance-manager/user_map.cc
"HANDLER statements within a transaction might lead to deadlocks".
Introduce a notion of a sentinel to MDL_context. A sentinel
is a ticket that separates all tickets in the context into two
groups: before and after it. Currently we can have (and need) only
one designated sentinel -- it separates all locks taken by LOCK
TABLE or HANDLER statement, which must survive COMMIT and ROLLBACK
and all other locks, which must be released at COMMIT or ROLLBACK.
The tricky part is maintaining the sentinel up to date when
someone release its corresponding ticket. This can happen, e.g.
if someone issues DROP TABLE under LOCK TABLES (generally,
see all calls to release_all_locks_for_name()).
MDL_context::release_ticket() is modified to take care of it.
******
A fix and a test case for Bug#46224 "HANDLER statements within a
transaction might lead to deadlocks".
An attempt to mix HANDLER SQL statements, which are transaction-
agnostic, an open multi-statement transaction,
and DDL against the involved tables (in a concurrent connection)
could lead to a deadlock. The deadlock would occur when
HANDLER OPEN or HANDLER READ would have to wait on a conflicting
metadata lock. If the connection that issued HANDLER statement
also had other metadata locks (say, acquired in scope of a
transaction), a classical deadlock situation of mutual wait
could occur.
Incompatible change: entering LOCK TABLES mode automatically
closes all open HANDLERs in the current connection.
Incompatible change: previously an attempt to wait on a lock
in a connection that has an open HANDLER statement could wait
indefinitely/deadlock. After this patch, an error ER_LOCK_DEADLOCK
is produced.
The idea of the fix is to merge thd->handler_mdl_context
with the main mdl_context of the connection, used for transactional
locks. This makes deadlock detection possible, since all waits
with locks are "visible" and available to analysis in a single
MDL context of the connection.
Since HANDLER locks and transactional locks have a different life
cycle -- HANDLERs are explicitly open and closed, and so
are HANDLER locks, explicitly acquired and released, whereas
transactional locks "accumulate" till the end of a transaction
and are released only with COMMIT, ROLLBACK and ROLLBACK TO SAVEPOINT,
a concept of "sentinel" was introduced to MDL_context.
All locks, HANDLER and others, reside in the same linked list.
However, a selected element of the list separates locks with
different life cycle. HANDLER locks always reside at the
end of the list, after the sentinel. Transactional locks are
prepended to the beginning of the list, before the sentinel.
Thus, ROLLBACK, COMMIT or ROLLBACK TO SAVEPOINT, only
release those locks that reside before the sentinel. HANDLER locks
must be released explicitly as part of HANDLER CLOSE statement,
or an implicit close.
The same approach with sentinel
is also employed for LOCK TABLES locks. Since HANDLER and LOCK TABLES
statement has never worked together, the implementation is
made simple and only maintains one sentinel, which is used either
for HANDLER locks, or for LOCK TABLES locks.
Bug#16565 mysqld --help --verbose does not order variablesBug#20413 sql_slave_skip_counter is not shown in show variables
Bug#20415 Output of mysqld --help --verbose is incomplete
Bug#25430 variable not found in SELECT @@global.ft_max_word_len;
Bug#32902 plugin variables don't know their names
Bug#34599 MySQLD Option and Variable Reference need to be consistent in formatting!
Bug#34829 No default value for variable and setting default does not raise error
Bug#34834 ? Is accepted as a valid sql mode
Bug#34878 Few variables have default value according to documentation but error occurs
Bug#34883 ft_boolean_syntax cant be assigned from user variable to global var.
Bug#37187 `INFORMATION_SCHEMA`.`GLOBAL_VARIABLES`: inconsistent status
Bug#40988 log_output_basic.test succeeded though syntactically false.
Bug#41010 enum-style command-line options are not honoured (maria.maria-recover fails)
Bug#42103 Setting key_buffer_size to a negative value may lead to very large allocations
Bug#44691 Some plugins configured as MYSQL_PLUGIN_MANDATORY in can be disabled
Bug#44797 plugins w/o command-line options have no disabling option in --help
Bug#46314 string system variables don't support expressions
Bug#46470 sys_vars.max_binlog_cache_size_basic_32 is broken
Bug#46586 When using the plugin interface the type "set" for options caused a crash.
Bug#47212 Crash in DBUG_PRINT in mysqltest.cc when trying to print octal number
Bug#48758 mysqltest crashes on sys_vars.collation_server_basic in gcov builds
Bug#49417 some complaints about mysqld --help --verbose output
Bug#49540 DEFAULT value of binlog_format isn't the default value
Bug#49640 ambiguous option '--skip-skip-myisam' (double skip prefix)
Bug#49644 init_connect and \0
Bug#49645 init_slave and multi-byte characters
Bug#49646 mysql --show-warnings crashes when server dies
The problem is a somewhat common misusage of the strmake function.
The strmake(dst, src, len) function writes at most /len/ bytes to
the string pointed to by src, not including the trailing null byte.
Hence, if /len/ is the exact length of the destination buffer, a
one byte buffer overflow can occur if the length of the source
string is equal to or greater than /len/.
