------------------------------------------------------------
revno: 2630.39.3
revision-id: davi.arnaut@sun.com-20081210215359-i876m4zgc2d6rzs3
parent: kostja@sun.com-20081208222938-9es7wl61moli71ht
committer: Davi Arnaut <Davi.Arnaut@Sun.COM>
branch nick: 36649-6.0
timestamp: Wed 2008-12-10 19:53:59 -0200
message:
Bug#36649: Condition area is not properly cleaned up after stored routine invocation
The problem is that the diagnostics area of a trigger is not
isolated from the area of the statement that caused the trigger
invocation. In MySQL terms, it means that warnings generated
during the execution of the trigger are not removed from the
"warning area" at the end of the execution.
Before this fix, the rules for MySQL message list life cycle (see
manual entry for SHOW WARNINGS) did not apply to statements
inside stored programs:
- The manual says that the list of messages is cleared by a
statement that uses a table (any table). However, such
statement, if run inside a stored program did not clear the
message list.
- The manual says that the list is cleared by a statement that
generates a new error or a warning, but this was not the case
with stored program statements either and is changed to be the
case as well.
In other words, after this fix, a statement has the same effect
on the message list regardless of whether it's executed inside a
stored program/sub-statement or not.
This introduces an incompatible change:
- before this fix, a, e.g. statement inside a trigger could
never clear the global warning list
- after this fix, a trigger that generates a warning or uses a
table, clears the global warning list
- however, when we leave a trigger or a function, the caller's
warning information is restored (see more on this below).
This change is not backward compatible as it is intended to make
MySQL behavior similar to the SQL standard behavior:
A stored function or trigger will get its own "warning area" (or,
in standard terminology, diagnostics area). At the beginning of
the stored function or trigger, all messages from the caller area
will be copied to the area of the trigger. During execution, the
message list will be cleared according to the MySQL rules
described on the manual (SHOW WARNINGS entry). At the end of the
function/trigger, the "warning area" will be destroyed along with
all warnings it contains, except that if the last statement of
the function/trigger generated messages, these are copied into
the "warning area" of the caller.
Consequently, statements that use a table or generate a warning
*will* clear warnings inside the trigger, but that will have no
effect to the warning list of the calling (outer) statement.
mysql-test/r/sp.result:
Fix test case results.
mysql-test/r/trigger.result:
Fix test case results.
mysql-test/t/sp.test:
Add test case for Bug#36649
mysql-test/t/trigger.test:
Add test case for Bug#36649
sql/sp_head.cc:
Emulate multiple warning areas -- one per stored program instance.
sql/sql_parse.cc:
Message list reset rules are the same for statements inside
or outside compound statements.
------------------------------------------------------------
revno: 2630.39.3
revision-id: davi.arnaut@sun.com-20081210215359-i876m4zgc2d6rzs3
parent: kostja@sun.com-20081208222938-9es7wl61moli71ht
committer: Davi Arnaut <Davi.Arnaut@Sun.COM>
branch nick: 36649-6.0
timestamp: Wed 2008-12-10 19:53:59 -0200
message:
Bug#36649: Condition area is not properly cleaned up after stored routine invocation
The problem is that the diagnostics area of a trigger is not
isolated from the area of the statement that caused the trigger
invocation. In MySQL terms, it means that warnings generated
during the execution of the trigger are not removed from the
"warning area" at the end of the execution.
Before this fix, the rules for MySQL message list life cycle (see
manual entry for SHOW WARNINGS) did not apply to statements
inside stored programs:
- The manual says that the list of messages is cleared by a
statement that uses a table (any table). However, such
statement, if run inside a stored program did not clear the
message list.
- The manual says that the list is cleared by a statement that
generates a new error or a warning, but this was not the case
with stored program statements either and is changed to be the
case as well.
In other words, after this fix, a statement has the same effect
on the message list regardless of whether it's executed inside a
stored program/sub-statement or not.
This introduces an incompatible change:
- before this fix, a, e.g. statement inside a trigger could
never clear the global warning list
- after this fix, a trigger that generates a warning or uses a
table, clears the global warning list
- however, when we leave a trigger or a function, the caller's
warning information is restored (see more on this below).
This change is not backward compatible as it is intended to make
MySQL behavior similar to the SQL standard behavior:
A stored function or trigger will get its own "warning area" (or,
in standard terminology, diagnostics area). At the beginning of
the stored function or trigger, all messages from the caller area
will be copied to the area of the trigger. During execution, the
message list will be cleared according to the MySQL rules
described on the manual (SHOW WARNINGS entry). At the end of the
function/trigger, the "warning area" will be destroyed along with
all warnings it contains, except that if the last statement of
the function/trigger generated messages, these are copied into
the "warning area" of the caller.
Consequently, statements that use a table or generate a warning
*will* clear warnings inside the trigger, but that will have no
effect to the warning list of the calling (outer) statement.
Correction of backport patch:
* Fixed signature of check_access_table() for embedded build
* Fixed typo for last argument in a check_access() call from UINT_MAX to 0.
Correction of backport patch:
* Fixed signature of check_access_table() for embedded build
* Fixed typo for last argument in a check_access() call from UINT_MAX to 0.
# Bug#24690 Stored functions: RETURNing UTF8 strings
# do not return UTF8_UNICODE_CI collation
#
# Bug#17903: cast to char results in binary
# Regression. The character set was not being properly initialized
# for CAST() with a type like CHAR(2) BINARY, which resulted in
# incorrect results or even a server crash.
#
Backporting from mysql-6.0-codebase.
mysql-test/r/sp-ucs2.result:
mysql-test/t/sp-ucs2.test:
Adding tests
sql/mysql_priv.h:
Adding prototype
sql/sp.cc
Remember COLLATE clause for non-default collations
sql/sql_parse.cc
Adding a new helper function
sql/sql_yacc.yy
- Allow "CHARACTER SET cs COLLATE cl" in
SP parameters, RETURNS, DECLARE
- Minor reorganization for "ASCII" and "UNICODE"
related rules, to make the code more readable,
also to allow these aliases:
* "VARCHAR(10) ASCII BINARY" -> CHARACTER SET latin1 COLLATE latin1_bin
* "VARCHAR(10) BINARY ASCII" -> CHARACTER SET latin1 COLLATE latin1_bin
* "VARCHAR(10) UNICODE BINARY" -> CHARACTER SET ucs2 COLLATE ucs2_bin
* "VARCHAR(10) BINARY UNICODE" -> CHARACTER SET ucs2 COLLATE ucs2_bin
Previously these four aliases returned the error
"This version of MySQL does not yet support return value collation".
Note:
This patch allows "VARCHAR(10) CHARACTER SET cs COLLATE cl"
and the above four aliases.
"VARCHAR(10) COLLATE cl" is still not allowed
i.e. when COLLATE is given without CHARACTER SET.
If we want to support this, we need an architecture decision
which character set to use by default.
# Bug#24690 Stored functions: RETURNing UTF8 strings
# do not return UTF8_UNICODE_CI collation
#
# Bug#17903: cast to char results in binary
# Regression. The character set was not being properly initialized
# for CAST() with a type like CHAR(2) BINARY, which resulted in
# incorrect results or even a server crash.
#
Backporting from mysql-6.0-codebase.
mysql-test/r/sp-ucs2.result:
mysql-test/t/sp-ucs2.test:
Adding tests
sql/mysql_priv.h:
Adding prototype
sql/sp.cc
Remember COLLATE clause for non-default collations
sql/sql_parse.cc
Adding a new helper function
sql/sql_yacc.yy
- Allow "CHARACTER SET cs COLLATE cl" in
SP parameters, RETURNS, DECLARE
- Minor reorganization for "ASCII" and "UNICODE"
related rules, to make the code more readable,
also to allow these aliases:
* "VARCHAR(10) ASCII BINARY" -> CHARACTER SET latin1 COLLATE latin1_bin
* "VARCHAR(10) BINARY ASCII" -> CHARACTER SET latin1 COLLATE latin1_bin
* "VARCHAR(10) UNICODE BINARY" -> CHARACTER SET ucs2 COLLATE ucs2_bin
* "VARCHAR(10) BINARY UNICODE" -> CHARACTER SET ucs2 COLLATE ucs2_bin
Previously these four aliases returned the error
"This version of MySQL does not yet support return value collation".
Note:
This patch allows "VARCHAR(10) CHARACTER SET cs COLLATE cl"
and the above four aliases.
"VARCHAR(10) COLLATE cl" is still not allowed
i.e. when COLLATE is given without CHARACTER SET.
If we want to support this, we need an architecture decision
which character set to use by default.
CURRENT_USER() in GRANT ... TO CURRENT_USER() only gave us a definer,
not a full user (i.e., password-element was not initiliazed). Hence
dereferencing the password led to a crash.
Properly initializes definers now, just so there are no misunderstandings.
Also does some magic so IDENTIFIED BY ... works with CURRENT_USER().
mysql-test/r/grant2.result:
Show GRANT ... TO CURRENT_USER() no longer crashes.
Show it to work with IDENTIFIED BY to boot.
mysql-test/t/grant2.test:
Show GRANT ... TO CURRENT_USER() no longer crashes.
Show it to work with IDENTIFIED BY to boot.
sql/sql_acl.cc:
Make IDENTIFIED BY ... work with CURRENT_USER()
sql/sql_parse.cc:
Zero password-part of definer just in case somebody mistakes this for
a complete LEX_USER!
CURRENT_USER() in GRANT ... TO CURRENT_USER() only gave us a definer,
not a full user (i.e., password-element was not initiliazed). Hence
dereferencing the password led to a crash.
Properly initializes definers now, just so there are no misunderstandings.
Also does some magic so IDENTIFIED BY ... works with CURRENT_USER().
Backport for 5.5
In non debug builds, the statements:
- SHOW PROCEDURE CODE
- SHOW FUNCTION CODE
used to fail with a "syntax error", which is misleading.
These statements have been changed to return the following error for non
debug builds:
ERROR HY000: The 'SHOW PROCEDURE|FUNCTION CODE' feature is disabled; you
need MySQL built with '--with-debug' to have it working
For debug builds (./configure --with-debug), nothing is changed.
Backport for 5.5
In non debug builds, the statements:
- SHOW PROCEDURE CODE
- SHOW FUNCTION CODE
used to fail with a "syntax error", which is misleading.
These statements have been changed to return the following error for non
debug builds:
ERROR HY000: The 'SHOW PROCEDURE|FUNCTION CODE' feature is disabled; you
need MySQL built with '--with-debug' to have it working
For debug builds (./configure --with-debug), nothing is changed.
XA START may cause assertion failure/server crash when it is called
after unilateral roll back issued by the Resource Manager (both
in regular transaction and after XA transaction).
The problem was that rm_error variable wasn't set/reset properly.
mysql-test/r/xa.result:
A test case for BUG#43171.
mysql-test/t/xa.test:
A test case for BUG#43171.
sql/handler.cc:
Setting rm_error when we're out of XA transaction has no
special meaning. But it blocks reset of thd->transaction.xid
structure later.
sql/sql_parse.cc:
Reset rm_error before we enter ha_rollback(), so
thd->transaction.xid strucure is reinitialized.
XA START may cause assertion failure/server crash when it is called
after unilateral roll back issued by the Resource Manager (both
in regular transaction and after XA transaction).
The problem was that rm_error variable wasn't set/reset properly.
- Added checking of return value for system(), freopen(), fgets() and chown()
- Ensure that calls that require a format strings gets a format string
- Other trivial things
Updated test suite results (especially for pbxt and embedded server)
Removed warning for "Invalid (old?) table or database name 'mysqld.1'" from pbxt tests
Speed up some pbxt tests by inserting begin ; commit; around "while loops with inserts"
Added mysqld startup option '--debug-flush'
Create maria_recovery.trace in data directory instead of current directory
client/mysql.cc:
Check return value from system()
client/mysql_upgrade.c:
Check return value from fgets()
client/mysqladmin.cc:
Check return value from fgets()
client/mysqlslap.c:
Check return value from system() (but ignore it, as it's not critical)
extra/yassl/src/crypto_wrapper.cpp:
Check return value from fgets() (but ignore it, as it's internal file)
extra/yassl/taocrypt/src/aes.cpp:
Added extra {} to remove compiler warning
extra/yassl/taocrypt/src/blowfish.cpp:
Added extra {} to remove compiler warning
extra/yassl/taocrypt/src/misc.cpp:
Ifdef not used code
include/mysys_err.h:
Added error message for failing chown()
mysql-test/mysql-test-run.pl:
Don't give warning for skipping ndbcluster (never enabled in MariaDB)
mysql-test/suite/funcs_1/r/is_columns_is_embedded.result:
Update with new information schema information
mysql-test/suite/funcs_1/r/is_tables_is_embedded.result:
New test
mysql-test/suite/funcs_1/r/is_tables_myisam_embedded.result:
Update test results (has not been tested for a long time)
mysql-test/suite/funcs_1/r/is_tables_mysql_embedded.result:
Update test results (has not been tested for a long time)
mysql-test/suite/funcs_1/t/is_tables_is.test:
Don't run with embedded server (as results differ)
I added a new test for embedded server
mysql-test/suite/funcs_1/t/is_tables_is_embedded.test:
New test
mysql-test/suite/pbxt/my.cnf:
Allow one to run pbxt tests without having to specify --mysqld=--default-storage-engine=pbxt
mysql-test/suite/pbxt/t/count_distinct3.test:
Speed up test by inserting begin; ... commit;
mysql-test/suite/pbxt/t/subselect.test:
Speed up test by inserting begin; ... commit;
mysys/errors.c:
Added error message for failing chown()
mysys/my_copy.c:
Added error message for failing chown()
mysys/my_redel.c:
Added error message for failing chown()
mysys/safemalloc.c:
Added cast to get rid of compiler warning
sql/ha_partition.cc:
Fixed wrong argument to sql_print_error() (it requires a format string)
sql/log.cc:
Test return value of freopen()
sql/mysqld.cc:
Test return value of freopen()
Added startup option '--debug-flush' to be used when one gets a core dump (easy to explain to people on IRC)
sql/rpl_rli.cc:
Fixed wrong argument to sql_print_error() (it requires a format string)
sql/set_var.cc:
Added {} to get rid of compiler warnings
sql/slave.cc:
Fixed wrong argument to mi->report() and sql_print...() (they require a format string)
sql/sql_cache.cc:
Fixed wrong argument to sql_printinformation() (it requires a format string)
sql/sql_parse.cc:
Test return value of fgets()
sql/sql_plugin.cc:
Fixed wrong argument to sql_print_error() (it requires a format string)
sql/sql_select.cc:
Use unique table name for internal temp tables instead of full path
(Simple speed & space optimization)
sql/udf_example.c:
Removed compiler warning about not used variable
storage/maria/ha_maria.cc:
Fixed wrong argument to sql_print_error() and ma_check_print_error() (they require a format string)
storage/maria/ma_recovery.c:
Create maria_recovery.trace in data directory instead of current directory
storage/maria/unittest/ma_test_loghandler-t.c:
Fixed wrong argument to ok(); Requires a format string
storage/pbxt/src/strutil_xt.cc:
Detect temporary tables by checking if that path for the table is in the mysql data directory.
The database for temporary tables is after this patch, from PBXT point of view, ""
This is needed to stop PBXT from calling filename_to_tablename() with the base directory as an argument, which caused
ERROR: Invalid (old?) table or database name 'mysqld.1'" in the log when running the test suite.
tests/mysql_client_test.c:
Fixed compiler warnings
unittest/mysys/base64-t.c:
Fixed wrong argument to diag() (it requires a format string)
Added a comment that the current 'print' of differing buffers doesn't print the right thing,
but didn't fix this as it's not important (unless we find a bug in the real code)
Conflicts
=========
Text conflict in .bzr-mysql/default.conf
Text conflict in libmysqld/CMakeLists.txt
Text conflict in libmysqld/Makefile.am
Text conflict in mysql-test/collections/default.experimental
Text conflict in mysql-test/extra/rpl_tests/rpl_row_sp006.test
Text conflict in mysql-test/suite/binlog/r/binlog_tmp_table.result
Text conflict in mysql-test/suite/rpl/r/rpl_loaddata.result
Text conflict in mysql-test/suite/rpl/r/rpl_loaddata_fatal.result
Text conflict in mysql-test/suite/rpl/r/rpl_row_create_table.result
Text conflict in mysql-test/suite/rpl/r/rpl_row_sp006_InnoDB.result
Text conflict in mysql-test/suite/rpl/r/rpl_stm_log.result
Text conflict in mysql-test/suite/rpl_ndb/r/rpl_ndb_circular_simplex.result
Text conflict in mysql-test/suite/rpl_ndb/r/rpl_ndb_sp006.result
Text conflict in mysql-test/t/mysqlbinlog.test
Text conflict in sql/CMakeLists.txt
Text conflict in sql/Makefile.am
Text conflict in sql/log_event_old.cc
Text conflict in sql/rpl_rli.cc
Text conflict in sql/slave.cc
Text conflict in sql/sql_binlog.cc
Text conflict in sql/sql_lex.h
21 conflicts encountered.
NOTE
====
mysql-5.1-rpl-merge has been made a mirror of mysql-next-mr:
- "mysql-5.1-rpl-merge$ bzr pull ../mysql-next-mr"
This is the first cset (merge/...) committed after pulling
from mysql-next-mr.
